Ubuntu Multimedia :: No Video Output - Dell XPS M1530
Aug 24, 2010
I've been running Ubuntu for about 2 years now. When I first put it on my Dell it was 9.0x. My HDMI port worked just fine to connect to my Plasma to watch movies on. I've only ever connected it 2-3 times. Since Fall '08 I haven't used it again. I never needed to.
Since that time, it stopped working. When available I upgraded to 9.04, 9.40 and now (effective 10.23.10) 10.04. It just doesn't work anymore. Neither VGA or HDMI. I can only assume S-Video will be the same story. Video card is an NVIDIA GeForce 8400m GS. Driver is version 173. I installed NVTV tv out (Nvidia Video output controller). It does nothing. When NVTV is typed into terminal, it says; Fatal: No supported video card found.
View 3 Replies
ADVERTISEMENT
May 30, 2011
My dell xps m1530, has just been upgraded to 11.04 with a clean install and I can not get my wireless drivers to work. I just can not connect..
View 9 Replies
View Related
Sep 24, 2010
1. Is CentOS 5.5 a stable release?
2. Hardware support for Dell XPS M1530.
View 2 Replies
View Related
Feb 21, 2010
I tried Ubuntu before and because the wireless kept giving me error i stopped using linux for a while and now i'm back to give it another try and hopefully stay with linux, so help me out please. thanks in advance.
lspci & lsusb
Code:
ahmad@ubuntu:~$ lspci -nn | grep Broadcom
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4328 802.11a/b/g/n [14e4:4328] (rev 03)
ahmad@ubuntu:~$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code]...
View 4 Replies
View Related
Mar 7, 2010
I installed KMplayer but I cant play video files...No video output but can get only the audio output...So how to make this work for videos?
View 2 Replies
View Related
Aug 6, 2011
I have a Dell mini 10 netbook that I am trying to set up as a temporary HTPC. Using XP, I can send the video and audio over the HDMI connection, but when I attempt to do so from Ubuntu, there is not an option for a different monitor.
View 3 Replies
View Related
Jan 15, 2010
I have a Dell Latitude CPi that has 400MHz Intel Processor and 256 MB of ram. It has a Neomagic Corporation NM2360 [MagicMedia 256ZX]. I have it set to 16 bit color depth and it is using the neomagic driver. My problem is that it cannot play any video of any size flash, or saved to hard drive. It has a fps so low that I can see it rendering each frame going across the screen. It doesn't seem to have a problem with animated pictures, just actual video files. I don't know whether or not this matters but the card set is known to not support 3d acceleration. I can run any commands in terminal and have a good understanding of the linux environment. This problem has occurred under Ubuntu and Xubuntu and still happens if I use a light weight WM like fluxbox.
View 2 Replies
View Related
Jan 6, 2010
I just upgraded from Ubuntu 9.04 to 9.10 today, and went to watch a movie on my hard drive. I typically do this with an S-Video cord on my TV. In Ubuntu 9.04 I did so simply by plugging in the S-Video cord, then pressing FN+F4 on my keyboard. Worked like a charm.
After the upgrade the same key combination just changes my resolution setting.
View 2 Replies
View Related
Feb 27, 2010
I can't seem to figure out how to get the S-Video output working on my T41, and most of the info that I seem to be finding is for older versions before xrandr so files and settings don't seem to match.
I know that it's not a hardware/cable problem because this exact setup works fine under windows (even though there i'm working with a hacked video driver setup since one doesn't exist for any of the "modern" versions of windows, ati radeon 7500 (mobile))
View 2 Replies
View Related
Feb 17, 2011
Hardware: HP dv3505ea laptop
Ubuntu: 10.04 LTS
uname -a: Linux adventure 2.6.32-28-generic #55-Ubuntu SMP Mon Jan 10 23:42:43 UTC 2011 x86_64 GNU/Linux
HDTV: Panasonic TX-L37D28BSA
I'm having trouble getting any output from my laptop's HDMI socket. I've had a search and can only find sound problems, mine is no visible output whatsoever.
Let me describe the setup: Laptop has a HDMI socket which I have never used before, HDTV has 4 HDMI inputs, I just bought a HDMI cable to connect the two to try it.
After connection I go to System->Preferences->Monitors and the TV is detected fine with the correct description and offers me 3 different resolutions. xrandr also works and gives me the same thing:
Code:
However none of the options display ANYTHING on the TV. The screen remains black, not even a flicker.
I have connected the laptop to the TV before using an analogue VGA (monitor) cable which worked in the same way with no problems.
Could this be an encryption/DRM/DVI problem? I have suspicions about the cable too because it is new and I haven't seen it work, but it wouldn't detect the correct TV description and resolutions would it? It was sold as an XBOX360/PS3 HDMI cable, is there a difference? It looks like a standard HDMI male-male cable.
Other things I've tried:
Log off and log back on to restart the X server
reboot
Some more stuff:
Code:
View 1 Replies
View Related
Dec 9, 2010
In the control centre under multi media selector for configuring GStreamer it has Autodetect and two other setting, X Window System (No Xv) and X Window System (X11/XShm/Xv) etc. When I test the X Window System (No Xv) the test card in full screen is far better then autodetect, should I keep this setting, the reason I ask is I can't notice the difference when watching video.
View 1 Replies
View Related
Mar 15, 2011
I've just installed Xubuntu 10.10 on a ThinkPad R50e and on a R51. I want to get them working as fast as possible. Of cause, all updates are done and all codecs for gstreamer have been installed, too.
Parole Media Player tells me to not be able to initialise Xv output, so no video appears on screen.
Then I've started to search for the cause of trouble. Seems to be an Intel grafics adaptor handled by the Vesa module, which I don't know how to change to the correct Intel module (which is installed, by the way).
I've googled for this issue and found few other people talking about. But there was no solution, at least none that I could understand.
Now, I would be really glad if you could help me to find a working solution during the next few days.
Code:
~$ xvinfo
X-Video Extension version 2.2
screen #0
no adaptors present
Code:
~$ lspci
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
code....
View 1 Replies
View Related
Jul 9, 2010
Im trying to be able to output video to my tv with a low end atom cpu box(link below) running debian lenny. I realize it wont likely be true HD video. I also realize I wont be getting surround sound. My tv is a little bit older so it doesnt have a monitor input or I would have tried that. It does have HDMI and component though and i have a DVI to hdmi adapter and audio cables that will work once I have a video out solution. It does have a PCIE expansion bay but the power supply is only like 150w so i dont know that Ill be able to use a regular video card. I had considered some sort of usb output but dont know if any of that will work on linux. Any suggestions? Im pretty novice with the whole computer on my tv area and dont have alot of money to build a whole new system or i would just do that.
[URL]
View 2 Replies
View Related
Aug 30, 2011
Excuse me if this is in the wrong place, I am new to the forum and Debian.
Today, while installing Ubuntu, I had a strange issue with my laptop in which after installation, I heard startup sounds and had no video display. After hours of frustration and about 7 install disks, I plugged my laptop into another monitor, and low and behold, it appears both of my desktops are on the external monitor. After trying to solve this issue, I decided to give the Debian Gnome live CD a try, but I now have the same issue.
View 1 Replies
View Related
Sep 11, 2011
Is there a way VLC to use vdpau as video output? Mplayer and Gnomemplayer can use it and the video playback uses as little as 2-4 % CPU power even on 1080p movies. Xorg and Kwin continue to use pretty much CPU power in video playback process , I suppose there is no way to limit them or there is ?
Open Suse 11.4 86x64, KDE4-4.5.6, NVidia 275.xxx.xxx
View 2 Replies
View Related
Apr 20, 2010
Is it possible to make video output (to monitor) black and white? Without changing the monitor settings, of course.
View 2 Replies
View Related
Jan 6, 2010
script which adjusts my NVIDIA settings to HDMI and also my Audio output to my digital output. I feel its quite a lot of clicking to get my signal to my LCD.So I hope somebody already had this idea and can give me the script or can assist me in writing it myself. I think its not a complicated script. i guess its only 2 lines. But i am not exactly a pro in Ubuntu..So as i said i have a NVIDIA graphic cardand aplay -l shows
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
[code]...
View 1 Replies
View Related
Jan 16, 2010
I am trying to watch a movie on tv through an s-video cable, but it's black and white, or with very fade colours. I understood that I have to change output to pal. I also understood that I can do it in the xorg.conf file, but I don't have anything like that.
video card: intel x3100
system: ubuntu karmic 9.10
View 1 Replies
View Related
Apr 24, 2010
I have noticed that, using nvidia's latest drivers, HDMi output to my 32" LCD (1920x1080) and totem or vlc, the video on my LCD gets a bit "choppy" when the image changes faster.. some bars start appearing on the moving parts of the image.. like the system is having trouble rendering the video. This doesn't happen on my laptop screen even when both displays are running at the same time.
Also, this problem doesn't appear in windows 7, everything works perfectly there with one odd thing... the picture gets "choppy" on the laptop screen when I'm running both at the same time. It's not that noticeable, but I can tell the difference between windows and ubuntu in quality and it's annoying me
View 3 Replies
View Related
Jan 26, 2011
When I try to play a dvd and give mplayer no options, it defaults to "X11" for the video output, which maxes out the cpu. To get around this, firstly I tried to play the dvd using "cvidix" in the console.
I used the following command:
mplayer -ao alsa -vo cvidix -fs -framedrop -stop-xscreensaver -dvd-device /dev/dvd1 dvd://1
This played the dvd, but the console text was still visible over the top of the movie; i.e. mplayer was playing in the layer beneath the console text
Then I tried using xvidix in X:
mplayer -ao alsa -vo xvidix -fs -framedrop -stop-xscreensaver -dvd-device /dev/dvd1 dvd://1
This gives a green line about 5mm thick down the right side of the screen, but other than that it is ok.
View 6 Replies
View Related
Sep 1, 2010
I'm trying to produce some screenshots of the screen in which there's a window playing a video in avi format. The problem is whenever I take a shot, the video window appears 'solid blue' in the output image. Is there any way or program with which I can capture the current frame of the video
View 1 Replies
View Related
Apr 29, 2010
I cant seem to get the sound working and when I click on perference then sounds and go to the output selection it has only dummy output as a option.
View 3 Replies
View Related
Jan 25, 2011
Running 10.10 and win 7 on my HP dv6-2150us laptop and I'm having a few issues.
First how do I get HDMI audio output to my TV? I think I have just a integrated Intel graphics card. It works fine in windows but I can't seem to get it to work in Ubuntu. I tried searching but couldn't find anything pertaining to this issue.
View 3 Replies
View Related
Jan 6, 2011
I am sure that this is very simple but I have installed sound juicer and the gstreamer plug ins. The problem is i still cannot select MP3 as an output output option
View 3 Replies
View Related
Feb 25, 2009
How do I get 'the Desktop effects' to work on M1530?
View 2 Replies
View Related
Mar 18, 2010
i've got a dell mini 10 w/ 9.10 nbr on it, and videos played in either totem or vlc won't play, and result in the player crashing. it almost crashes the whole desktop. i can usually recover from ctrl-alt-f1 and killing the process or restarting the gui.
i've got no idea how to fix it. it's got a gma500 and that poulsubo (sp?) video driver. flash works reasonably well for a netbook though. i can watch videos vids ok- just have ot shy away from full screen videos, and especially not get tempted by full screen hi-def videos...
View 4 Replies
View Related
Feb 24, 2010
I have recently installed ubuntu using wubi on a dimension 9100 PC.When i boot up ubuntu I get a message that it cannot display current video mode when the GUI tries to launch. The monitor is a Dell E173FPb.From digging about on google it seems I need to edit the xorg.conf file? However, it doesn't exist in the /etc/X11 directory. Does wubi not create this file?
I then created a template of this xorg.conf with the "sudo X -configure" command. I then copied the created file to /etc/X11/xorg.conf and editied the Monitor settings. however, I still get the same error even when I put in the HorizSync and VerRefresh settings shown on the Dell webpage (31-80 and 56-76 respectively).
View 1 Replies
View Related
Apr 7, 2011
I'm running Ubuntu 10.10 w/ an ATI HD 4350 and trying to output to a CRT television over S-Video @ 640x480. Problem is the screen blanks out after ten minutes no matter how I configure my screensaver or power management settings. I've done some research regarding commands in Terminal, but I can't find anything straightforward.
View 2 Replies
View Related
Feb 16, 2011
vlc always open video with xvideo output in ubuntu 9.10
View 1 Replies
View Related
Aug 19, 2010
I recently acquired an HP Pavilion 7845 and have since installed XUbuntu on it. The onboard video, which is shared with the main system memory, is OK. But I am wondering if there are any compatible PCI video cards (possibly with DVI output) so that I can use it with a 32-inch LCD TV I have.
View 1 Replies
View Related
