CentOS 5 Hardware :: Ethernet Driver For Dell Inpiron Laptop 1545?
Oct 7, 2009get the Ethernet driver for dell laptop 1545. I am using Centos 5.3
View 9 Repliesget the Ethernet driver for dell laptop 1545. I am using Centos 5.3
View 9 RepliesI have a Dell Inspiron 1545 with a Dell Wireless 1397 WLAN Mini-Card and a Marvell Yukon 88e8040 PCI-E Fast Ethernet Controller, and I cannot for the life of me get the internet to connect. I've tried both wired and wireless connection. I have a PPoE connection through a Verizon FIOS Actiontek router I believe, though the PPoE part may be wrong, I had one five years ago when I first got their internet so they may have changed it. Point is that the ethernet and internet won't work, and without a working ethernet I can't fetch the right drivers for anything.
I had also tried plain ubuntu 10.04 and couldn't get them to work then either. It said 'disconnected' at first, and then said 'device not ready' There is no hardware switch but there is a key toggle. It doesn't seem to matter what state the wireless was in before booting into Ubuntu Studio, so I'm lost as to where to even start. Even though the network manager isn't there like in regular ubuntu, I assume there will be a simple way to connect to the internet once the drivers are found, right?
I've seen issues and read about fixing them, but usually it uses an ethernet connection to fix the wifi connection and, being new to linux (<50 hours worth of experience lifetime), all I managed to do trying to fix it myself was screw up the installation to the point where the laptop couldn't access the home folder and I had to reinstall. Other than that, I am usually very good at following instructions, as long as they apply to my laptop's issue I guess
The only other issue is minor, I can't seem to control the USB mouse I have, but the trackpad works fine so it's no big deal, probably a matter of downloading the mouse driver once the internet works.
Currently I do have internet access via the same laptop while booting Windows 7 (I installed Ubuntu Studio 10.04 on a 10GB Partition with the idea of using an external HD for most data storage).
Oh and it is a 64-bit machine, the Studio version I installed is 32-bit.
I am using Ubuntu right now. But I wanted to install Fedora 12 on my Dell inspiron 1545 laptop. My questions are can I use a live cd if available for fedora 12 and then install it on my laptop like we can do for ubuntu. Are all the drivers available automatically installed during installation.
The problem I faced my last installation with fedora 11 was that I could not get the wireless installed and I was unsuccessful in installing the wireless drivers using ndis wrapper or b43-legacy or something.
Can you give me a detailed link which could allow me to install the wireless drivers and also the video drivers for my laptop. The problem I am facing with my ubuntu 10.04 is that it is slow, the flash plugin is worst i guess, some of the flash videos are very slow.
Taking all of these into account can someone suggest me a good operating system. I am pretty much interested in learning linux rather than just using it like a windows operating system. I am considering, fedora 12, suse 11.2, linuxmint, centos, mandriva. Which one could be a best possible for my installation.
As I am not willing to purchase a dvd for these linux flavors can I use my flashdrive to install.
I'm an experienced user in Windows but a complete novice in Linux. I have a dual boot with ubuntu and 7 ultimate, the thing is that Ubuntu doesn't recognize my wi-fi card. Windows Device Manager tells me that my card is "Dell Wireless 1397 WLAN Minicard" made by Broadcom. I don't know if my problem is with a driver or incompatible hardware, the ISO is perfect because I already installed linux on every computer in my house.
View 6 Replies View Relatedi have installed red hat 5.1 on my dell inspiron 1525 laptop.It is not detecting any ethernet card.driver is marvel yukon 88E8040So far i found this package to be installed kmod-sk98lin-PAE-10.70.7.3-2.el5.elrepo.i686.rpm but it is showing me the dependencies problems..
View 4 Replies View RelatedEthernet is not detected with the following setup:
OS: Debian Lenny
Laptop: Dell Latitude D600
Ethernet adapter: Broadcom 57xx Gigabit Integrated Controller
Wifi adapter: Broadcom BCM4309 802.11a/b/g
Have done the following troubleshooting suggestions from around the www:
LAN controller is enabled in BIOS
dmesg | grep eth0 returns nothing
lspci -v | grep -i net shows wifi adapter but no ethernet adapter
ifconfig -a does not show eth0
ifconfig eth0 up confirms ERROR while getting interface flags: No such device
Have done lsmod, but not sure what I should be looking for.
I would post lspci, dmesg or any other output, but as the adapter is not being detected, I have no network/internet connection from that laptop, have only one other Windows based (at this stage) laptop that I am using to write this message, and so would have to type out the output manually.Adapter indicators are both on when laptop is powered up. Am unsure if the ethernet adapter has somehow gone to sleep, and if so, unsure how to wake it.Perhaps the ethernet adapter is defective, but am hoping to confirm this before looking for a workaround/replacement.
I have to install a Windows XP on my laptop. I started to install Windows, but after the first step (before booting Windows from hard disk) I received Disk Error at booting time. I reinstalled grub and everything is fine with Ubuntu, but I can't boot the Windows partition to finish installing this OS.
[Code]...
i was just wondering if anyone could help me with my webcam. I'm unsure if it was detected during the instalation and do not know how to turn it on if it was.
View 5 Replies View RelatedI have Dell 1545 pre-loaded with Ubuntu 9.04. It has Oracle VM VirtualBox installed, for which I run Ubuntu 10.04. I have downloaded drivers for Ubuntu 10.04 to interface with Lexmark X6650, and can easily print documents from Ubuntu 10.04. However, I cannot figure out how to access the scan function.
View 7 Replies View RelatedHow can I install Linux Red Hat 9.2 on my new dell Inspiron 1545. When I want to installed it, it will get to a stage and will ask me of drivers. But on my desktop I don't have such problem.
View 12 Replies View RelatedAs the title says the option in the SCREENSAVER(Power Management Preferences)Put display to sleep when inactive for is not working. I have selected 2 minutes, and even after 1 hour it will not shutdown the display.
View 3 Replies View RelatedThe kernel-PAE-2.6.30.5-43 upgrade will not boot on my Dell 1545 notebook. The initialization stops and the systems freezes right at the point that the login prompt should appear. I do not have invidia drivers. I have Intel video drivers. Also there is a loud 'pop' in the sound system early in the initialization sequence. For the time being, I have removed the 2.6.30.5-43 upgrade via yum.
View 8 Replies View RelatedI'm running Ubuntu 9.10, Dell Inspiron 1545. I have the NDISwrapper installed, and the driver shows up in "Hardware Drivers" as activated (Broadcom STA wireless driver) it also shows up in "Windows Wireless Drivers" (bcmwl6) but it still won't allow me to connect wirelessly.
View 9 Replies View RelatedI am having trouble in getting the wireless up in Ubunto 10.04. Under Wireless Networks it says "wireless disabled". I have a dual boot with Windows 7, installed Ubunto with the help of Wubi installer. My laptop is Dell Inspiron 1545, with a 64 bit architecture.I have already done checking and enabling the wireless driver by going to System- Administration-Hardware Drivers and choosing Broadcom STA driver.
View 7 Replies View RelatedI've got a Dell Inspiron 1545 with wireless card Dell wireless 1397 802.11g. It was working fine with Windows and Ubuntu 9.04 (I've got the two OS installed alongside). But as soon as I upgraded my Ubuntu to version 10.4 I realised it lost its wireless connection! I updated the system, the hardware driver for Broadcom STA wireless driver is activated and in use (according to Ubuntu Hardware drivers checker) but the fact is that I can only connect on the Internet if I hook the net cable on it, when I run the mouse over internet connection icon at the topright side of the monitor I see "no network" message and when I left click on it the option "wireless network" it's disabled and gray. How can I get my wireless card back working?
View 1 Replies View RelatedI have install 64bit version of Fedora 12 on a new Dell Inspiron 1545 with a Dell 1397 wireless card. It actually uses a Broadcom BCM4312 chip.
I have install the following rpms:
Code:
broadcom-wl-5.10.91.9.3-1.fc12.noarch
kmod-wl-2.6.31.9-174.fc12.x86_64-5.10.91.9.3-3.fc12.11.x86_64
kmod-wl-5.10.91.9.3-3.fc12.11.x86_64
code....
what I do not understand is the state of the card as unavailable. how I can activate this card?
I just installed Ubuntu 10.04.1 on my Dell Inspiron 1545 laptop, but I can't connected to the Internet with a wired or wireless connection. I have a BT Home Hub 2 wireless router. I can connect to the Internet when running Windows Vista, but not with Ubuntu.
I tried installing the Broadcom STA driver off of the live disk, which initially seemed to work. However, I still couldn't connect to the Internet and when I clicked on System > Administration > Hardware Drivers, there weren't any proprietary drivers to install or that had been installed. Also, when I reboot, Ubuntu tries to connect to my network automatically but always fails. That's what makes me think that a driver has been installed, but just isn't the right one or isn't working.
Actually, the title I was looking for was Belkin Gigabit Ethernet ExpressCard not seen on Dell Precision M6500 with CentOS 5.5 _when system boots with no link on this card_. When I boot this system with a cable connected to the Ethernet port, the card shows up (dmesg, lspci 0e:00.0 and ifconfig). When I boot it with nothing connected, it's like it doesn't exist. I know I could make it work with a loopback plugged in at all times, but am looking for a more graceful solution. Here are messages logs from when it's recognized
Jul 19 15:14:23 mss kernel: sky2 driver version 1.22
Jul 19 15:14:23 mss kernel: sky2 0000:0e:00.0: v1.22 addr 0xf6afc000 irq 193 Yukon-2 EC rev 2
Jul 19 15:14:23 mss kernel: sky2 eth0: addr 00:00:5a:11:45:5b
[code]...
Update: Should have been a little clearer - this card has the Marvell Yukon chipset. I'm trying to identify the part number without ripping out the casing.
I have a Dell 1545 laptop with ubuntu 9.1 32-bit installed (the 64-bit had a bug with the wireless drivers which is why I have not used it). Initially, the laptop worked well with the wireless (a sky router with WPA security) but now, the wireless signal drops after a couple of minutes of usage. I have to reboot the laptop or sometimes reboot the router as well to regain the wireless signal. I am using the Broadcom STA proprietary wireless driver.
I have an older dell inspiron 6400 as well with the same OS and driver and it works perfectly without any problems for hours / days.
I am using Dell Inspirion 1545 core 2 duo T6600, 3 gb ram,320 gb sata hddand in my bios i got 4 option (1) disable which disable sata and hdd is not detected (2) ATA where in my M$ is working(3) AHCI which mode will work. also i am using vm-ware to installed redhat linux 5.my hdd did not detected. do u need any information tell me i will post it on the same any command out put or log by which we can solve this problem.
View 1 Replies View Relatedi installed the Centos 5.5 and try to put my USB stick D-link DWA 140 to work. without success. i googled some things put without success. i have not possibility to connect the laptop to the ethernet only way is through this usb stick. i have already downloaded the lasted RT2870 firmware now on i do not know what to do nothing work?
View 2 Replies View RelatedI am using CentOS 5, I have recently installed it on my Dell LATITUDE laptop but the resolution was 800x600. I've tried to put it on 1680x1050 and it worked out well I guess but the graphics had become very slow. For example I have to wait 5 to 6 seconds to scroll from page to page in a pdf file. Minimizing a window takes also a lot of time. I have a NVIDIA card in my PC.
View 5 Replies View RelatedI am trying run the 5.3 LiveCD on a Dell Inspiron 5100 laptop. If I boot the typical LiveCD I get no display once everything is loaded. If I boot the text version and then perform a startx command I still get no display. I have been able to install other Linux distributions without this type of issue. Is there a way to configure something for the display to function properly?
View 2 Replies View RelatedBrand new Dell XPS 15 laptop.
NVIDIA GeForce GT 420M graphics card with Optimus.
15.6HDF TLF LCD L501X screen.
Centos 5.5 64 bit, text install.
I downloaded and install the NVIDIA graphics driver NVIDIA-Linux-x86_64-260.19.29.run When I run system-config-display the display configuration appears but is very, very faint. Increasing screen brightness has no effect.
I have Dell Inspiron 1545. It works fine on wired but fails on wireless.
I am using wicd as an interface.
It always comes up with the following error: Connection Failed: Bad password.
I have checked the passwords in both wicd and the router.
They seem to be the same. Am I missing something ?
I have problems with my laptop which runs well until it decides to freeze and it either shuts down or I have to turn it off. After I restart the system there is no hdd check to signal that something really wrong happened. I suspect the nVidia driver for the Quadro FX 770M video card is responsible but I am not sure. Also, firefox sometimes runs sluggish (maybe flash is causing something to overcharge?) and often times the computer freezes when I am using firefox. The funny thing is that all my heavy simulations are not causing problems and often times they use 10GB of swap with no complains. When the laptop freezes I see two keyboard lights flashing intermittently. How can I figure out what is going on? I mean are there any log files where I can look for something or can I setup a log procedure to detect the cause of this problem?
View 3 Replies View RelatedI have bluetooth enabled in a Windows desktop Machine, which is connected to internet.
I would like to connect to internet through bluetooth available in my laptop which is running on CentOS 5.3.
I referred to many tutorials in internet, still couldn't configure bluetooth.
I changed a mainboard so the network card is RTL8111/8168B Gigabit now. By "ifconfig -a", there is only io, no eth0.
I got a driver r8168.ko from: [URL]
After I insert the r8168.ko, there is eth0. Run "/etc/init.d/network restart", it reports "Determing IP information for eth0... failed; no link present, Check Cable", and I noticed the lights of network card and runter are all off. I can use "ifconfig eth0" now but it cannot connect to other machine.
It's Gigabit card and my runter is 10/100M. I tried "#insmod r8168 speed=100 duplex=1 autoneg=1" and "#insmod r8168 speed=100 duplex=0 autoneg=1", it can not get IP by DHCP either. I also build the .ko from Realteck source code, the behavior is the same.
if I need to do other configurations?
My CentOS is CentOS5, 2.6.18-8.el5 #1 SMP.
== BEGIN uname -rmi ==
2.6.18-8.el5 i686 i386
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
[Code].....
I am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.
I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.
I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.
NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7
When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .
I have installed CentOS. I have two ethernet card (one onboard and one PCI). I am able to set ip for realtek ethernet card and my atheros(on board) is not shown in network ifconfig shows only one ethernet card (PCI) hen i gave the command lspci i got the following output
01:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)
03:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)