CentOS 5 :: Fonts Smaller After Latest Updates To Centos 5.6?
Apr 17, 2011
After doing an update a couple of days ago (had previously upgraded to 5.6), the font size in firefox (file forward reload, etc), terminal and the panel (using xfce) are significately smaller. Searching the web, mail lists and the forums have not resulted in finding anyone else with this problem. I did notice that glibc has a bug that is currently being worked on at Redhat but it is unclear if the font problem I am seeing is related. Note also, that the initial upgrade to Centos 5.6 was successful.
View 8 Replies
ADVERTISEMENT
May 31, 2010
We are running CentOS 5.4 x86 on ESX 4 Server. We have a busy Help Desk, a Forum and several name-based websites running. Weve been using CentOS for this 'purpose for several years (different versions) and so far we have never had a problem. On Saturday, I applied all the latest updates including the Kernel updates. I rebooted the server and all seemed well until Sunday morning when I didn't get my Logwatch in the mail. Then I got a telephone call from a customer asking me why I hadn't responded to a Trouble Ticket he had created on Saturday afternoon (creating a TT sends an email via sendmail to all the support staff). I did a few tests and sendmail has just stopped working. The Logwatch had been created and had been sent to root, but all mail for root is redirected to my Mail Server on e different box (GroupWise). There was nothing wrong with the mail server, but sendmail has just stopped.
Fortunately I had created a snapshot before I applied the updates, so I reverted back to the snapshot and mail started working again, but I lost 2 days info because I had run the backup before I applied the patches. Now I see there are 132 Updates available, but there is obviously a problem somewhere in there!
View 2 Replies
View Related
Jun 8, 2011
I just put the latest updates onto My CentOS 5.6 server. It started life as a 5.4 Server, then the upgrades took it to 5.6.
The latest updates did a Kernel Update and the server sent me two messages : -
-----BEGIN MESSAGE-----
[2011-06-08T12:37:17+0200] centos54.xxx.yyyyy.com
ALERT : [2011-06-08T12:37:17+0200] msg=<START>, program=<Samhain>, userid=<0>, path=</etc/samhainrc>, hash=<256A548F71A768CC1E054F0C1E90E8674D36A09BDF9E5D13>, path=</var/lib/samhain/samhain_file>,
[Code]....
View 5 Replies
View Related
May 9, 2010
I am trying to clone the hard drive to a slightly smaller hard drive in the same computer, same setup.What software or commands do you use to clone the entire system and resize the partition automatically?The original HD is a little larger than the destination HD. The source partition only has about 20 GB in use and the rest is blank.
I have 2 partition, a small 100MB boot partition and another 500GB LVM partition.I can't just clone from the original disk to the new disk. (for another long reason) I need to make an image of the original disk on an external USB drive first, then move that image onto a new disk.I have tried creating an image of the whole disk with Clonezilla, but then the restoration didn't work because the target drive is smaller than the original.
View 7 Replies
View Related
May 23, 2010
the best repo. of them all which includes all the software needed.?ans is there any repo which allow latest softwares in centos like fedora.????cause i don't want to install all repos.in centos 5.5.
View 1 Replies
View Related
Feb 6, 2011
In general CentOS search automatically after startup for available software updates.Then after some (~20-30) minutes an icon appears in the toolbar which the user can click and install the updates.How can I manually speed up/trigger IMMEDIATELY the search for updates (without waiting for the built-in search)?
View 3 Replies
View Related
Mar 3, 2011
There have been no updates recently (for almost two months) on any of my CentOS 5.5 boxes when I run 'yum check-update'. I may be misunderstanding the repo setup, but looking at the file mod dates, it seems that there hasn't been an update since 2011-01-06:[URL]...Meanwhile, a prominent North American Enterprise Linux vendor has had multiple security and bug fixes since then:[URl]...Is CentOS 5.5 still getting updated, or am I missing something (quite possible).
View 12 Replies
View Related
Apr 28, 2011
I have a volume group that is made up of a number of physical volumes. I am thinking of consolidating all the small physical volumes onto one big drive. Is there any benefit in this, besides making administration easier? How do I go about doing this? From what I have read, it looks like I should have to do the following
1. add the new big drive to the VG
2. use pvmove to move the smaller PV onto the new PV
3. use pvchange -xn to make sure the old PV can no longer be allocated
4. repeat for all the small PVs.
5. use pvremove to remove all the small PVs
Is this the correct procudure to follow?
View 4 Replies
View Related
Jul 4, 2010
If I open my 3.3MB .jpg file in Microsoft Paint and re-save it as .jpg it will right away loose it's size and go down to 1.5MB and still keep the good quality.
I have 100s of these picture files, so I can't set down and do it one by one in Paint.
I am wondering if there is any command in Centos 5.4 or tool that I can use to not only make these files size smaller but also to standardize their size to let's say 800 X 600. The latter is not really needed but it will be bonus if someone can guide me.
I am running a php photo gallery script and it takes way to long to load the picture hence the requirement to lower the size for all the files.
I know that there is "mogrify" and "convert" but I think they don't work without GIMP. I don't have GIMP installed and I do install it I think it goes on to install a lot of gnome libraries which I am afraid might break my server or overload it too much. My CentOS doens't have any GUI or gnome package to it and I want to keep it simple.
View 1 Replies
View Related
Mar 18, 2009
I'm using hughesjr' kernel-rt and would like to use ext4 as well. Since the stable release of ext4 is in 2.6.28, I'm wondering if there are any plannedupdates to this kernel-rt release? If not, is it possible to patch this version (2.6.24.7-65.el5rt.centos) of the kernel with stable ext4 patches/tools?
View 7 Replies
View Related
May 13, 2010
I'm running CentOS 5.4 and noticed that for the past month there haven't been any new updates showing up either on 'yum check-update' or 'yum update' (I'm interested in basic and security updates). Although this may be right, I wonder if there is an online reference where I can check the updates that are released for CentOS (security bulletins) and make sure if there is anything wrong with my update system.
View 11 Replies
View Related
Aug 30, 2010
I reduced my system font sizes from default 10 down to 8, but I want to also reduce the height of the Main Menu correspondingly. I've searched the forums and Google, but can't find a method for doing this. See the screenshots - both menu heights are exactly the same, but if I reduce the font size, I'd like the menu to shrink too.
View 3 Replies
View Related
Jan 12, 2011
Recently I installed some of the MS Office 2007 fonts onto my Ubuntu 10.10 machine in order to use them. Unfortunately, a few of them look really blocky at font sizes smaller than 16 pt. The two i'm having issues with are Calibri and Cambria. I don't seem to have this issue with any other set of fonts. Here is a screenshot of the issue in question. I remember having this same issue on 10.04, before I upgraded, if it means anything.
By the way, I took the fonts from a windows machine, on which the fonts were working properly.
View 3 Replies
View Related
Apr 14, 2009
After upgrading to CentOS 5.3, emacs is unable to locate its default font. (I've been able to supply emacs with a command-line or config-file link to a different installed font, but that's a workaround, not a solution.) I'm not sure if this is a packaging error, an error in our repository configuration, or something else. Below I've inserted some info that seems relevant. I'd be happy to post other information as requested. I've also attached a probably unnecessary screenshot of emacs displaying little blocks instead of characters at the very bottom of this post. Here's the command-line error thrown by emacs on startup:
[Code]...
whether one of emacs's needed fonts has been moved from one package to another in the latest upgrade. Or (most likely) it's something else I haven't thought of.
View 3 Replies
View Related
Apr 19, 2010
installing `yum` in my VPS Centos 5.3 (Final release) I need `yum` because I want to install Japanese fonts in my sever. What is the command for installing Japanese fonts in my VPS Centos 5.3 server
View 2 Replies
View Related
Feb 10, 2009
Am using Icefaces1.7.2 in tomcat5.5.23 in Centos5( jdk 1.6.06 and jre 6u11 and no X window system in my server ).. Am getting the error(java.lang.Error: Probable fatal error: No fonts found) when am using the functions getFontMetrics() and drawString() methods in my Captcha Image Generation programs. I am only using the fonts that me retrieved using ge.getAllFonts() ( i.e., the fonts available in the system ).
View 6 Replies
View Related
Nov 18, 2010
how i can upgrade to the latest version of yum on a Centos 5 box?
View 4 Replies
View Related
Dec 30, 2010
In CentOS 5.4 (Final), emacs is displaying characters as little boxes. see attached screen shot. I searched the Web and found others have this same problem with emacs in CentOS 5.4 but have not found any solution. I installed emacs in a base CentOS Amazon EC2 instance as follows:
yum -y groupinstall "GNOME Desktop Environment"
yum -y install emacs
yum -y groupinstall emacs
This issue does not arise for me in Amazon EC2 instances running Red Hat, Fedora, or Ubuntu when I install emacs as I did here. I am not X font savvy
View 1 Replies
View Related
Mar 31, 2009
I'm new to the yum installation route and am looking forward to getting some experience using it, however, I am working to build a Nagios server through yum and have run into difficulties meeting the dependencies. (I'd previously installed from source on a different server though I'd been warned is a bad thing so I am trying to make nice and go this route but have run into snags right off...) The dependency hurdle I'm trying to overcome is getting to GLIBC2_4 from my version of 2.3.
I've read through a number of posts where people have had issues getting glib updated or gcc installed correctly. This is pretty much a new installation of CentOS (VM cloned off an earlier install that was taken just after going through the GUI setup). As far as I have gotten is 'yum update' which updated the kernel and openssl.
View 2 Replies
View Related
Oct 28, 2009
I have just installed Centos 5.4 on my box and run "yum update", but to my surprise it says there is nothing to be updated:
# yum update
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* addons: centos.intergenia.de
* base: centos.intergenia.de
* extras: ftp-stud.fht-esslingen.de
* updates: centos.bio.lmu.de
Setting up Update Process No Packages marked for Update test
View 4 Replies
View Related
Feb 4, 2010
I have CentOS 5.4 installed with lighty and MySQL installed via yum. not a problem. The issue become when I'm having problem with the current mysql that I installed via yum which I believe its currently at version 5.1.42-2. So I'd like to upgrade it to the latest available version of mysql. Except I can't figure out whether to download the generic glibc32 version or just get the RHEL5 version or find the mysql enterprise version somewhere. So, not knowing what I'm doing, I downloaded the RHEL5 version since it's closer to CentOS 5.4. Except for whatever reason the mysqli is not installed or configured properly and I'm not sure how to fix it.
Any suggestion? Everything was working nicely when I used yum to install, except the problem with the version of mysql that's offered in the repository. So I'd like to request a suggestion on how to either somehow upgrade mysql using yum and there's a different repository that I didn't know, or perhaps download a proper latest and greatest mysql, install and have it configured so that mysqli work properly.
View 6 Replies
View Related
Jan 29, 2011
How to update pacemaker to the latest version 1.1.4?
View 2 Replies
View Related
Mar 31, 2011
Aside from a few minor issues, I've been happy with VLC 0.9.9.
I recently did a yum update to get to Centos 5.5. I've got yum pointed to Dag.
Everything worked fine, until I restarted VLC 0.9.9.
In the update it looks like ffmpeg was updated to the 6.X branch, x264, and how vlc 0.9.9 was recompiled.
wait wait wait.. let me clarify, vlc 0.9.9 still works, but a key function in it that i use has broken.
I am able to do a yum downgrade on x264 and ffmpeg, but I am unable to downgrade VLC because it tells me there is no down grade path. How do I go about requesting the previous version of VLC be added back to Dags RMP site?
I spent sometime hacking on things the last 2 days, and was able to compile using the same ./configure options that were compiled from Dag with ffmpeg 5.2, and x264 and I get them to compile cleanly. VLC 0.9.9 source compiles and the errors I'm hitting go away.
I don't think the ffmpeg 6.X rmp is broken, i just think its to new for vlc 0.9.9 and breaks certain functionality.
View 13 Replies
View Related
Apr 16, 2011
After installing the latest updates (the second round of updates since the upgrade from CentOS 5.5 to 5.6), Evolution mail barely works on my KDE desktop.After I do manage to get it running, then exit the program and log out, bonobo-activation-server and a couple of evolution process invariably continue running, and must be killed manually.The program generally does not start at all using the desktop program icons. If I make sure bonobo and all evolution processes are dead, I can generally get it started using the command line, but it complains with this error message:
[edfix@eagle ~]$ evolution --component=mail
** (evolution:6324): DEBUG: mailto URL command: evolution --component=mail %s
** (evolution:6324): DEBUG: mailto URL program: evolution
libnm_glib_nm_state_cb: dbus returned an error.
(org.freedesktop.DBus.Error.ServiceUnknown) The name org.freedesktop.NetworkManager was not provided by any .service files
I tried reverting to the previous kernel (2.6.18-238.5.1.el5), but no improvement. System data is at [URL]
View 5 Replies
View Related
Apr 8, 2009
I would like to install on my box FFMPEG with libx264 support. First of all I've tried yum install ffmpeg, but it occurs that it downloads a version from 2007 (?) and without libx264. Than I've tried this: [URL]. And everything goes ok till last ./configure:
./configure --enable-gpl --enable-postproc --enable-nonfree --enable-postproc --enable-libfaad --enable-swscale --enable-avfilter --enable-pthreads --enable-libxvid --enable-libx264 --enable-libmp3lame --enable-libfaac --disable-ffserver --disable-ffplay
And in this moment I do "make" and get:
-bash-3.2# make
gcc -DHAVE_AV_CONFIG_H -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_ISOC9X_SOURCE -I"/usr/local/lib/tmp/ffmpeg2/ffmpeg" -I"/usr/local/lib/tmp/ffmpeg2/ffmpeg" -fomit-frame-pointer -pthread -g -Wdeclaration-after-statement -Wall -Wno-switch -Wdisabled-optimization -Wpointer-arith -Wredundant-decls -Wno-pointer-sign -Wcast-qual -Wwrite-strings -O3 -fno-math-errno
-c -o libswscale/swscale.o libswscale/swscale.c .....
libswscale/swscale.c:3409: warning: assignment discards qualifiers from pointer target type
make: *** [libswscale/swscale.o] Error 1
And as you can see I get a lots of errors. Tried to install it for 5 day now, How to make this work??
View 2 Replies
View Related
May 8, 2009
Running CentOS 5.3
Recently installed - manually, not with yum, the rpm distribution of the latest MySql (5.1.34) as I needed the latest version, not the one that YUM lists. I am now trying to set up (for the first time) an email server on the same system, and I have been led to believe that postfix and dovecot are the way to go. However when I try to install dovecot I get this:
Matched: dovecot
dovecot.i386 : Dovecot Secure imap server
[root@localhost ROOT]# yum install dovecot.i386
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* extras: mirror.trouble-free.net
* updates: www.gtlib.gatech.edu
* base: pubmirrors.reflected.net
* addons: mirrors.gigenet.com
Setting up Install Process
Parsing package install arguments
Resolving Dependencies
--> Running transaction check
---> Package dovecot.i386 0:1.0.7-7.el5 set to be updated
--> Processing Dependency: libmysqlclient.so.15(libmysqlclient_15) for package: dovecot
--> Processing Dependency: libmysqlclient.so.15 for package: dovecot
--> Running transaction check
---> Package mysql.i386 0:5.0.45-7.el5 set to be updated
--> Processing Conflict: mysql conflicts MySQL
--> Finished Dependency Resolution
mysql-5.0.45-7.el5.i386 from base has depsolving problems
--> mysql conflicts with MySQL-server-community
Error: mysql conflicts with MySQL-server-community
[root@localhost ROOT]# yum deplist dovecot.i386
View 7 Replies
View Related
Jun 14, 2010
I have CentOS 5.5 installed on my Dell D600. This release includes SAMBA 3.0.
Question: Is there a way to use yum to upgrade / install the latest version of SAMBA (3.5.3)?
A "yum search samba" shows there is only the "samba3x" release available - which is SAMBA 3.0
I've downloaded the SAMBA3-3.5.3-43.el5.i386.rpm package for Cent OS 5 from the SAMBA.org site, but when I try to install it, it fails due to package dependencies.
Short of downloading the source and compiling it myself, is there a better method to get the latest version of SAMBA installed on my system?
View 4 Replies
View Related
Dec 4, 2008
The problem seems to be a memory issue. Seems the problem only started happening after the last few updates. I have tested the memory with memtest and both servers passed. There hasn't been any new software put on the servers for over 12 months. Server 1 - 3 gig of memory CentOS 5.2 - Linux version 2.6.18-92.1.18.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Wed Nov 12 09:19:49 EST 2008 Errors in log
[Code]...
View 5 Replies
View Related
May 2, 2009
This is just a curious question. I am trying to setup a LVS system with three layers: (1) Virtual Servers, (2) Real Servers & (3) Storage Servers.
Real Servers (RS) & Storage Servers (SS) are on private network. My question is, how RS & SS look for latest updates from the Internet?
View 2 Replies
View Related
Feb 21, 2011
I know this is not as easy or simple as I talk this questions for a free distro. Is it possible, that the last update for the update repository is from 07. Jan. 2011? I know I can get the srpm from rh and compile it by myself.
Is it right --> in case of new releases and limited resources the updates for supportet releases are not highest priority and so we have to wait a little or compile it manually from rh source?
View 4 Replies
View Related
