I have HP ML350 G6 Server with RAID10 enabled on bios While trying to install Centos 5.5 64 bit OS I am getting the error mentioned below. "An Error Occured trying to initialize swap on device cciss/codop3. This problem is serious and the install cannot continue."
View 2 RepliesI have Centos 5.1 and im a total newbie. I have managed to get it running with Apache and PHP but after I install mysql it fails to start with the above error. I have removed it as well using YUM and reinstalled it but it still will not start.
View 4 Replies View Relatedmy sound works when i boot up but as soon as i play a couple of files with VLC video or audio it doesn't matter the sound stops and comes up with an error saying: ALSA version problem:VLC failed to re-initialize your sound output device. Please update alsa-lib to version 1.0.22 or higher to fix this issue.Potential ALSA version problem:VLC failed to initialize your sound output device (if any).Please update alsa-lib to version 1.0.23-2-g8d80d5f or higher to try to fix this issue. I found latest version on net and installed and yast said install fail version already installed my sound device is HDA Intel (ALC C880 Analog)
View 1 Replies View RelatedI am recently getting a very weird error on my Webmin. The result of this problem I suspect is I am no longer able to log into my Maia Mailguard which is my Spam Viewer.
Quote:[BEGIN failed--compilation aborted at (eval 17) line 1.
restarting miniserv
[06/Apr/2011:23:34:09 -0400] Restarting
[06/Apr/2011:23:34:10 -0400] miniserv.pl started
[06/Apr/2011:23:34:10 -0400] Perl module Authen::PAM needed for PAM is not installed : Can't locate Authen/PAM.pm in @INC (@INC contains: /usr/libexec/webmin /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at (eval 17) line 1.
BEGIN failed--compilation aborted at (eval 17) line 1.
Failed to initialize SSL connection
Failed to initialize SSL connection
When I upgraded to CentOS5.2 from 5.1, puplet quit working:
$ sudo /usr/bin/puplet
libnotify-Message: Unable to get session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Error: unable to initialize pynotify
[code]....
I have FC6 system with kernel 2.6.22.14-72.fc6 When I rebooted my system, I got error message "unable to access resume device (LABEL=SWAP-sda8) then it went to fsck automatically to all the partition and then stop (failed)
Checking filesystems
/1:clean, 10543/2560864 files, 204494/2560359 blocks
fsck.ext3: unable to resolve 'LABEL=/backup'
/boot: clean, 155076/19546112 files, 13456168/39072080 blocks
[Code]...
when i start uubuntu it automatically goes to tty with out letting me login. then when i press startx it says:
NVIDIA: failed to initialize the nvidia graphics device pci:0:13:0
nvidia: please check your systems kernal log for additional erroe
nvidia: messages and refer to chapter 8
nvidia: failed to initialize the nvidia graphics device!
nvidia: screen found, but none have a usable configuration
fatal screen error: no screen found
right before this i had activated a nvidia graphics device
I'm using Lubuntu, I keep getting this error on FF and Chrome, any solutions ?`an error has occured, please try again later'
View 2 Replies View RelatedThere seems to be a programming error in aptdaemon, the software that allows you to install/remove software and to perform other package management related tasks. Please report this error atDetail
Traceback (most recent call last):
File "/usr/lib/python2.6/dist-packages/aptdaemon/worker.py", line 768, in simulate
return self._simulate_helper(trans, status_path)
[code]....
my Dad's computer was running quite slow here lately (Running Hardy Heron). I decided to go ahead and run all the software updates, and had it go ahead and update the OS as well. Well, the install went fine, but upon booting, it crashes to busy-box with the dreaded "ALERT! /dev/disk/by-uuid/########## not found error". I found that if I waited for a while, then cd'd to the by-uuid folder, this file eventually showed up. So I figured maybe if I 'exit' from there, it would boot up and find the file. Au Contrair, things get stranger! I end up with a purple screen telling "An Error Occured While Mounting /". Here's what it looks like: This is quite frustrating, I'd like to get it fixed and hopefully save the data he has on there! I remember having the by-uuid error once before after running an update I think, but can't remember how I fixed it! Feels like I just used the 'exit' trick a couple of boots and it was fine??
View 6 Replies View RelatedThis is my first linux install ever, so I have no idea what is going on. I hope I have enough information to get this figured out as soon as possible. I was bored with windows 7 and wanted to learn another operating system. I made a boot cd with openSuSE gnome. On the internal hard drive is my windows 7 boot system that i do not want to touch, and on the external 1tb hard drive, i'd like to partition 50 GB for openSuSE. If this is not possible i have another method, but i'd rather not use it (which is use my secondary 80 GiB hdd). When installing, I am getting the error, "Error occured while installing GRUB" Which shows the following:
[Code]...
Ok so I've searched for a solution to this problem everywhere and couldn't seem to find any, so I decided to post here.Recently I came across a new modified version of Ubuntu which was made for pentesters, called "blackbuntu".Now I know everything is the same as linux, except a little tweaked. So, I am trying to setup my bootable USB drive, and get this error (I chose Try an unlisted OS -- Then picked New Syslinux).And I keep getting this error:^
View 9 Replies View RelatedI updated my NetworkManager from version 0.9svn1128615-2.2 /opensuse/repositories/KDE:/KDE4:/Factory:/Desktop/openSUSE_11.2/i586/) to the newest version 0.9svn1128615-138.2.The result was, the after reboot an error message occured, saying that the KNetworkmanager is not working and it would be not able to start the program !Did anybody else have the problem with this newest version?
View 2 Replies View RelatedI am installing mod_perl on the Linux box. Could successfully installed httpd, mod_perl, expat. Now when I try to run "make" command for libapreq2-2.12, it gives following error -
[FONT="Arial"]Making all in glue
make[1]: Entering directory `/opt/customer/apache/2.2.8_64_modperl/lib/libapreq2-2.12/glue'
cd perl; /usr/bin/perl Makefile.PL -apxs /opt/customer/apache/2.2.8_64_modperl/bin/apxs
Can't locate Apache2/Build.pm in @INC (@INC contains: /usr/lib64/perl5/5.8.5/x86_64-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib64/perl5/site_perl/5.8.5/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.4/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.3/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.2/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.8.1/x86_64-linux-thread-multi
[Code]...
When I run QTads, I get this message:
"Unable to initialize audio mixer: No available audio device"
I've installed libqt4-gui, libsdl-mixer1.2, libsdl-sound1.2, libqt4-network to meet the dependency requirements. I've tried the pre-made binary from the Web site (http://qtads.sourceforge.net/downloads.shtml) as well as my own compiled from source (a binary which has proven to work on other machines also with Debian).
Sound works fine on the system. What can I do?
I was trying to update my Fedora 15 amd64 when a Error Notification popped up saying "An unspecified TRANSACTION ERROR has occured". More details: "could not add package update for fedora-release-rawhide-15-3(noarch)updates: fedora-release-rawhide-15-3.noarch".
View 4 Replies View RelatedThis is the error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message:
'E: Dynamic MMap ran out of room. Please increase the size of APT::Cache-Limit. Current value: 25165824. (man 5 apt.conf), E:Error occurred while processing libwpeditor-dev (NewFileVer1), E: Problem with MergeList /var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_karmic_universe _binary-amd64_Packages, E:The package lists or status file could not be parsed or opened.'
I'm trying to use emacs in the auctex mode. But Flymake complains about something I could not understand. This is the error it shows whenever I open a tex file.
Code:
Flymake:Configuration error has occured while running (texify --pdf --tex-option=-c-style-errors PATH_TO_FILE_DIRECTORY/FILE_flymake.tex).
Flymake will be switched OFF.
I have texify installed on my system. I also tried suggestions in the emacs wiki on FlymakeTex, added the following lines in my .emacs file:
Code:
(defun flymake-get-tex-args (file-name)
(list "pdflatex" (list "-file-line-error" "-draftmode"
"-interaction=nonstopmode" file-name)))
How do I stop this msg and use flymake.
We purchased a virtual server from GoDaddy (1 month trial) to set up as a proxy for our networks (24 of them). I am having 2 separate issues. The first is I can't configure/install NAT and support is telling me the only way I can is to purchase a dedicated server. Here's the error:
iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 3128 iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. Here's the fix: [URL] So, what I am hoping to do is configure this by just opening port 3128 directly, and only allowing access from our networks. As a test I did this and allowed only from our office and it did not work. However I can't connect, so I am wondering what I am doing wrong? Here's my squid configuration:
[Code]....
I'm having issues with getting my USB ports to work on my server. USB keyboards, mice, drives, flash drives, card readers, etc. will not work on this server.
dmesg
Linux version 2.6.18-194.32.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Wed Jan 5 17:53:09 EST 2011
BIOS-provided physical RAM map:
[code]...
I had installed the CENT OS 5.3 it is installed when i rebooted it gives me error continuously.
Buffer I/O Error on device sda, Logical Block 0
ata4.00 : exception Emask 0x0 SAct 0x0 action 0x0 frozen ......
ata4.00 : status: { DRDY }
why it has giving the error.i have Intel based hardware Core II Duo with 1 GB ram check with sata hard drive 120 GB.
I just downloaded an iso of the latest CentOS dist (5.3) and burned it to disk. I booted from the CD and received the following error:
Memory for crash kernel (0x0 to 0x0) not within permissible range
Illegal mode for this track or incompatible medium -- (asc=0x64, ascq-0x00)
The failed "read 10" packet command was:
Buffer I/O error on device hdd, logical block 176935
(This error message repeats for another 9 or 10 times then it says the following)
Red Hat nash version 5.1.19.6 starting
Setting up new root fs
(Then there are some unmounts which are old /dev, /proc, /sys. At this point a series of steps begin).
Setting Clock
Starting udev
Loading default keymap (us)
Setting hostname local host.localdomain
Setting up logical volume management
Checking file systems
These are just some of the steps that appear after the above error is displayed, all of the steps that load have an ok status. After those are completed I get to a text prompt - localhost login: At this point my keyboard does not seem to respond, pressing enter or any of the other keys seems to have no effect. I noticed that during the load process I could toggle the light for caps and num lock, but at the login screen it does'nt work. So at this point I'm not sure if I'm having a technical issue or if its just another case of an user error.
I virtualized a PC with VMware vCenter Converter. But when I boot my virtual PC, I have an error.I found this link but I can't mount /dev, /sys and /proc. I have this error message : mount: /dev is not a block device.
View 2 Replies View RelatedI keep getting "An internal System error has occured"Here is the output.Traceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 2093, in get_distro_upgrades
pkgs = self.yumbase.pkgSack.returnNewestByName(name='preu pgrade')
File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 649, in <lambda>
[code]....
when i was about to install turbo c using dosbox in ubuntu on the console i typed the commandas sudo apt-get install dosbox the error occured as E:couldnt find the package dosbox
View 5 Replies View RelatedI installed a second hard drive to my CentOS box. In the LVM GUI tool i see the hard drive but the "Initialize Entity" button is grayed out. I am not very familiar with using the LVM tool so i am not sure what to do from here.
View 1 Replies View RelatedToday, I use the vnc tool to connect the server , but it has the following message:
test@xxx: ~ vi ~/.vnc/xxx:1.log libhal.c 644 : Error connecting to system bus: Message did not receive a reply **(gnome-volume-manger:30626):WARING**: manager.c/912:failed to initialize HAL!
The server's os is CentOS 4.7 x86_64, I tried to google for the answer, but had no anything useful information.
Trying to install Frostwire as well as RPMFusion on Fedora 12 KDE.I simply just got an error from KPackageKit "An error occured." No additional details.I then tried to do the same with RPMFusion, where I also got the same error.I figured I'd ask here before I go any further. I know with Kubuntu I had some issues with particular packages with KPackageKit so I'd use GDebi for those. Should I do that here, or what's the proper protocol to get things like RPMFusion and Frostwire fired up?
View 3 Replies View Relatedfc10 86_64Every time I login and do not run any programs, the swap space used goes from 300 MB to 6GB. Memory stays at about 320 MB (out of 4 GB). I takes several minutes to fill the swap space, and when it gets full, it then goes back to 300 MB. Then the system runs ok.The system monitor shows no processes (other than itself) running, but cpu usage is about 20% on 1 of the 2 cpus
View 3 Replies View RelatedI have 2 network cards eth0 and eth1, for eth0 i set a manual MACADDR in network scripts. Ok so every time i boot, if the cable is plugged in, my eth0 fails to mount or i don't know.. i get this after bood when i type ifoncifg eth0 (eth0: error fetching interface information:Device not found). So i have to unplug the cable when i boot, then plug it in and do a service network restart.
View 5 Replies View Related