Ubuntu Networking :: Samba Shared Printer Not Visible?

Nov 14, 2010

I am trying to access a shared printer from one Ubuntu PC to another.

On the Server PC, I have the printer working, I have set it to shared, and I have set the server setting to Publish shared printers. I can see and use the printer fine from a windows PC.

On my Ubuntu Client PC, I have samba installed, including smbclient, and all other samba components I can think of. I can see other computers on my home workgroup (Windows and Ubuntu fine). I can also add a printer connected to my windows PC. However I cannot find the printer connected to the other ubuntu PC.

I see the instruction in the Samba guide saying

"Now enter your Ubuntu Samba Print Server (set up as above) IP address in the box on the left titled "smb://"."

However I do not have fixed ip addresses, so what am I supposed to enter in the box. If I enter nothing I can browse the network and can see the host computer, but the printer is not displayed. I can also see the printer connected to the windows PC. How do I 'see' the Ubuntu printer?

View 2 Replies


ADVERTISEMENT

Ubuntu Networking :: Are Samba Shared Folders Visible On Internet By Default?

May 31, 2010

I have created a shared folder in my ubuntu. And checked allow guest user access. I can access this folder with my other ubuntu computer connected trough LAN.The question is if anyone have my IP address can he/she access to my shared folder?Are samba shared folders shared over internet too? If so, This will be a very dangerous security problem.

View 5 Replies View Related

Networking :: Using Samba For Connecting To Vista Shared Printer

May 24, 2009

I'm trying to set up a Samba printer in Debian linux. The printer is being shared by a computer running windows vista. Some of the information I've got in the process. Sharing seems to be working, the printer seems to be detected and authenticating (I've tried invalid values and the utility I'm using to set things up says it cannot verify when I use invalid values, but with things as they are it claims everything checks out).

When I go into CUPS it says it detects the printer and everything is working. However, printing a test page causes the job to be immediately complete and nothing happens. It seems that the job is getting lost somewhere in the process. Could it be a firewall issue? I feel like the right ports must be unblocked since I can query the computer and verify the printer, etc. I have a laptop with vista which I installed a printer on and was able to print to that computer just fine. So it doesn't seem to be a Vista thing.

Code:
Domain=[OFFICECOMPUTER] OS=[Windows Vista (TM) Home Premium 6000] Server=[Windows Vista (TM) Home Premium 6.0]
Sharename Type Comment
--------- ---- -------
ADMIN$ Disk Remote Admin
C$ Disk Default share
D$ Disk Default share
HP Deskjet D1500 series Printer HP Deskjet D1500 series
IPC$ IPC Remote IPC
print$ Disk Printer Drivers
session request to 192.168.0.10 failed (Called name not present)
session request to 192 failed (Called name not present)
session request to *SMBSERVER failed (Called name not present)
NetBIOS over TCP disabled -- no workgroup available

Code:
OfficePrinter (Default Printer) Description: Location:
Printer Driver: HP Deskjet d1500 Series hpijs, hpijs 3.9.2
Printer State: idle, accepting jobs, published.
Device URI: smb:///192.168.0.10/HP%20Deskjet%20D1500%20series

Code:
ID* Name* User* Size* Pages* State* Control*
OfficePrinter-6* Test Page* anonymous* 17k* Unknown* completed at
Sat 23 May 2009 08:28:39 PM CDT

View 2 Replies View Related

Networking :: Samba Shared Printer: Install The Driver In A Windows Host?

Oct 20, 2010

I have found that there are certain things on the web that I need to print, that simply refuse to work under linux. I have a samba printer server on one of my Slackware boxes and an M$ XP vm under Vbox that can access the server and see the printer. The only problem that I have is that it expects to download a driver from the server which isn't available and the HP driver installer won't install if it doesn't detect the printer. Short of relocating the printer to install the driver, does anyone know how to get the driver installed on the XP host? This is so much easier with my Slack boxes and CUPS!

View 2 Replies View Related

General :: Spool Directory Samba Has Been Shared As Printer

Oct 2, 2009

In my samba configuration, I have a strange share.
Share name: MyPrinter
Shared folder: /var/spool/samba
comment = lp
read only = No
print ok = Yes
The spool directory /var/spool/samba has been shared as a printer. What will be the harm caused by it? (I don't know who shared such). And I also wanted to know the security issue due to it..

View 1 Replies View Related

General :: Samba Shared Printer - Put Security Password?

Nov 5, 2009

I'm using Ubuntu 9.04 and i've installed my HP Printer and SAMBA successfully. Windows XP clients on my network can successfully print through this shared printer. My problem is, is there a way to put a security password or some sort of authentication before they can print? its because this printer is only dedicated to one department only.

View 2 Replies View Related

Server :: Unable To Add Samba 3.5.5 Shared Printer To Windows

Sep 30, 2010

I am sitting with a slight problem sharing some HP network printers (JetDirect) with my windows machines. I have cups 1.4.4 configured on my Debian PDC with samba 3.5.5. The printers in question, is configured in cups and is working perfectly, but for some reason when I try to add the printers from Win7 or Win Vista I get the following error:

"Connect to Printer Windows cannot connect to the printer Operation failed with error 0x00000006"

I had a look around and it seems that the above error code is tied in with incorrect drivers, but the strange thing is that if I create a new local port on the win machines and specify the shared printers they work. The problem then is that cups does not identify the jobs correctly. The job will be named something like "smbprn.00000264 Remote Downlevel Document" instead of the actual document name. One of the reasons for using cups is to be able to monitor printer usage so this option is a temporary solution in my mind. Can the print$ share be causing it although it is empty and no drivers has been uploaded? Neither the samba nor cups logs give me something concrete to work with (hopefully someone else can spot the problem).

Extract from samba log:

[2010/09/30 09:21:01.734938, 2] lib/access.c:406(check_access)
Allowed connection from (192.168.1.20)
[2010/09/30 09:21:01.740480, 2] lib/access.c:406(check_access)
Allowed connection from (192.168.1.20)

[code]....

View 2 Replies View Related

Server :: Samba Shared Printer Prints Garbage

Jul 28, 2009

Just recently got a few printers connected to the network at my shop and I've managed to get them connected in with samba for the linux clients. Whenever I try to print from one of the clients, the printer will click on and whiz away, but only prints on the first page stuff that looks like this:

Code:
%!PS-Adobe-3.0
%%BoundingBox: 38 24 574 768
%%Title: Enscript Outpu
%%For: User N

It seems to me that the printer isn't processing the postscript data properly (or I'm just not sending it in the right format) but I'm at a loss as to how to go about fixing it.

View 4 Replies View Related

CentOS 5 Server :: How To Configure Samba (Shared Printer)

Aug 20, 2009

How to configure samba, cups, whatever else is necessary to turn centOS into a print server that provides the print driver to any client adding a printer shared from the server? For example, I have a Xerox Phaser 6125n and I was able to configure my server to share the printer for clients on the network, but I still have to have the driver available on each client that uses the printer. I want to be able to put the driver on the server and provide it automatically to any client who installs the printer.

Also, this is not as important but rather just an annoyance, I am having an issue with samba that I can't figure out. I have user shares set up on the server but the first time any user accesses their personal share they need to provide their password. How can I set up user mapping between linux and windows accounts so that authentication is automatic? I've done this in the past with Fedora Core 2, but that was a long time ago and the same doesn't work on centOS.

View 3 Replies View Related

OpenSUSE Network :: Windows 7 Cannot Connect To Samba-shared Printer?

Mar 23, 2010

My USB printer is connected to an OpenSUSE 11.2 desktop on a home network. I shared the printer with samba and can print from a Windows XP notebook connected to the network, but whenever I try to connect a Windows 7 machine, I always get the message that Windows cannot connect to the printer.

View 4 Replies View Related

Software :: CUPS Installation / Shared Printer And Not Able To Access Shared Printer From Any Of Fedora Machine?

Jul 21, 2010

Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.

View 1 Replies View Related

Ubuntu Networking :: Shared Folders No Longer Visible

Feb 23, 2010

I have two computers in the house that I have shared folders and one has a shared printer. I have a desktop running 9.04 and a laptop running 9.10. The desktop has several shared folders and a shared HP printer. The laptop only has one shared folder. Everything was working fine up until a couple days ago. I went on the laptop to access one of the desktop shared folders, and nothing shows up under "places, network" except windows network.

It no longer shows that the printer is currently shared either, but the funny thing is that I can still print to the desktop from the laptop.I just can't figure out how to access the shared folders.

View 6 Replies View Related

Debian Configuration :: Setting Up A CUPS/Samba Shared Network Printer?

Aug 19, 2010

how to get clients connecting to an office printer. during a migration from windows server to debian/samba.

We have:

5 windows XP machines one Windows Server 2003 machine, PDC of the old domain One debian Samba PDC (of TEST domain)/print server (with CUPS installeD) running in a virtual machine hosted by the windows server One Toshiba eStudio 3511 printer

Using the CUPS control panel, I've been able to autodetect and add the printer, and it appears as an available share in SWAT for samba. However, the driver isn't perfect. CUPS could only supply drivers for the 3510c, not the 3511.

However, clients on the TEST domain are unable to access it. Doing so gives an error about a local policy preventing a connection to the print queue. I've tried googling this error and the fix that comes up in every result about changing a point and print policy setting, does not work.

however, I've been able to work around the issue. by first logging in as local administrator, navigating to the domain server, then inputting the domain root account credentials at the prompt. That allows me to attempt to connect to printers, but with a different error

"The server for the printer does not have the correct driver installed...."

I very strongly suspect that the 3510 driver actually will work, but it's just not being shared properly. The printer driver share folder is /var/lib/samba/printers, and that directory contains only a few empty subfolders. CUPS did not place the driver there as I would expect, and that is where clients are looking for it.

The thing is, I have no idea where CUPS DID put the driver.

On the old domain, the printer uses drivers for es4511, and looking on the toshiba site, this seems to be what they provide. The Toshiba Site provides a huge variety of drivers, including several windows ones, a universal driver, and a CUPS PPD. Cups asks for an optional PPD during install and I tried supplying that. It said installed successfully, but didn't change anything.

I've tried pasting the windows drivers into /var/lib/samba/printers/W32X86 too, and likewise with other drivers from toshiba's site. but this doesn't change anything either, so I'm at a bit of a loss.

how to install/setup drivers on a samba PDC, for windows machines?

Also relevant, my smb.conf:
anyone see any possible causes of problems?
# Samba config file created using SWAT
# from UNKNOWN ()
# Date: 2010/08/19 13:03:07

[code]....

View 12 Replies View Related

Server :: Windows XP Machines Require Device Driver When Installing A Shared CUPS/Samba Printer?

Feb 27, 2010

I have installed Canon ImageRunner 2018i on my linux box using CUPS web interface. When I try to install this as a network printer from a Windows XP machine, the windows XP machine keeps asking me for a device driver. Is there a way to configure the printer on CUPS/Samba so that when I try to install it on Windows XP machine as a network printer, it does not ask me for a device driver?

View 7 Replies View Related

Ubuntu Networking :: Shared Folder Not Visible / Error: Failed To Mount Windows Share?

Jan 2, 2010

I have two computers running Ubuntu 9.10, both have one shared folder. These were set up via Nautilus.

On computer 1 I can see and use the shared folder of computer 2 just fine.

On computer 2 I can NOT see the shared folder of computer 1 anymore since recently. I has worked in the past.

Some more information: the name of computer 1 is "daniel", the share name is "gedeeld". So the address of the shared folder of computer 1 would be smb://daniel/gedeeld/
Opening this address in Nautilus works fine on computer 1 (that shares the folder), but results in an error on computer 2.

Error: failed to mount Windows share. Please select another viewer and try again.

View 1 Replies View Related

Ubuntu Networking :: Samba Shares Not Visible On The Network?

Jan 24, 2010

I'm trying to share some folders over the network, but the shared folders are not visible on another computer. This is through double clicking my computer from the Network list in Nautilus. However, I can access the share by typing the full address(<computer name>/<share name>) in "File > Connect to Server...".Since I can't type the address manually from my blu-ray drive, I need to get the shares to show on the network. What is wrong with my settings?

View 2 Replies View Related

Ubuntu Networking :: How Do I Go About Setting Up Samba So Stuff Is Visible

Nov 4, 2010

i'm trying to set up samba so that i can connect to the printer in the den since we have wireless access. also, i can see my virtual box on the windows xp home ed desktop, but can't access it.so, how do i go about setting up samba so stuff is visible between my ubuntu machine and my families windows orientated network? i'm having a hard time finding anything on videos too. i'm taking a break from the remastersys stuff so i can get the more important things done, such as connecting my ubuntu machine to my families windows network. i don't know if the printer is wireless or not, but regardless, i can't find it.

View 9 Replies View Related

Networking :: Samba + Some Windows Xp Hosts Not Visible In Entwork Neighborhood?

Apr 13, 2009

I have setup samba (samba + openldap) as my pdc. Some windows systems which are added to the domain are not visible through the windows xp's network neighborhood. However all the clients can login, browse other systems except for those which are not listed in the network neighborhood. I have attached the smb.conf file for reference.

Code:
[global]
workgroup = MOBIAPPS

[code]...

View 1 Replies View Related

Ubuntu Networking :: Can't Get Shared Printer To Work?

Jun 28, 2010

I am having what seems from the forum to be a common problem, getting a shared printer to work. Many similar posts to mine go unanswered for weeks. Can it not be done?I have followed the documentation, 2 computers with 10.4 ...set-up instruction followed ...sharing enabled... cups installed...printer seen by both computers... troubleshooting guide says it can see no reason printing not working, but no dice. This is frustrating to say the least. I have been working at this off and on for a couple of weeks.

View 2 Replies View Related

Ubuntu Networking :: Windows 7 Cannot See A Shared Printer

Nov 13, 2010

I have a Brother HL-2140 connected to a Linux box (Ubuntu 10.04 LTS) that I want to share on a Windows 7 home network (wireless). I followed all the configuration instructions as given on Ubuntu Documentation: Network Printing from WindowsXP. From the Windows 7 box I am able to see the printer in a webpage (using the URL). But when I use the same url in the Add Printer Wizard the system says that it couldn't find the printer.

View 1 Replies View Related

Ubuntu Networking :: Prevent People From Seeing Shared Printer?

Sep 4, 2010

I know it's very easy to share printers in Ubuntu, just went to System, Administration, Printing, Server Settings, Publish Printers connected to this system. VoiláMy question is:How can I create an access list so only certain IP addresses are allowed to see it?

View 8 Replies View Related

Ubuntu Networking :: Printing To Win7 Shared Printer?

Sep 5, 2010

I apologize if I'm a little wordy. I'll give the problem, then a detailed list of my setup (to help troubleshoot). Problem: I can't print from Ubuntu 10.4 on my Win7 shared printer. I also can't connect to the Win7 computer sharing the printer (probably a related problem).

Error Message:

1.) I click on Places, Network, Windows Network. I get an error that says "Unable to mount location, Failed to retrieve share list from server."

2.) I click on System, Administration, Printing, Add, Printer, Network Printer, Windows Printer via SAMBA, Browse..., and I get this error "No Print Shares, There were no print shares found. Please check that the Samba service is marked as trusted in your firewall configuration. To do this select System->Administration->Firewall from the main menu."

Network Configuration: I have a wireless/wired network (using a router) where the Ubuntu machine connects wirelessly and the Win7 machine connects wired. The Win7 machine is on a Win7 homegroup and custom named "workgroup". There is a username/password to log into the Win7 Machine. My other Win7 laptop connects just fine to the Win7 desktop's shared printer (and network drives). I know it isn't a issue of it not working (at least with other Win7 machines)

Problem: I'm assuming there is probably a setting in Win7 that needs adjusting (although I've looked at about everything I can find). I also don't know much about Ubuntu so it could very well be something I need to setup in Ubuntu. I checked already to make sure that SAMBA and the smbfs plugin is installed.

View 4 Replies View Related

General :: Installing Printer - Add Printer In Local Network Or Windows Printer Via Samba

Nov 23, 2009

I just upgrade to Fedora 11.

I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.

The summary is as follow:

I have download a printer driver and had installed but got error when I tried to printer a test page.

View 6 Replies View Related

Networking :: Opensuse Shared Printer Cannot Connect With Windows Xp

Jan 31, 2011

Printer directly connected with opensuse 11.2. we cant able to add printer in windows xp if wee add the system says the following error:

Function address 0x2c7d5e4 caused a protection fault. (exception code 0x0000005) The application property sheet page(s) may not function properly. And the system says acces denied unable to connect and the windows system hanging and says error report.

View 1 Replies View Related

Ubuntu Networking :: Can't View Printer Shared On CUPS Server From Other Machines On LAN?

Nov 1, 2010

I have been working through setting up a CUPS server on my Dell Dimension 2000 which is running Ubuntu 10.04. I have the server set up and the printer added and have gone through all of the steps the tutorials suggest to get the printer to be viewed on the network (set it to shared, allow other machines to view shared printers, etc). However, I can't find this printer on any of the other machine on my LAN (one machine running mac os x the other running Ubuntu 10.10).

View 2 Replies View Related

Fedora Networking :: Unable To Connect To Win XP Shared Files And Printer?

Apr 24, 2009

I have just got my network to work on Fedora, and now I have run into an new problem... I can't access any shared files or printers. The computer that has the printer and the files I want to access runs windows XP Home edition, and when I boot into XP on my machine, I can access the files and printer. Can this be fixed, or is Fedora incompatable with Windows XP in this case?

View 6 Replies View Related

Ubuntu Networking :: Access To Samba Shared Folder With Password

May 31, 2010

I have created a shared folder via nautilus. I can not access it, because it asks me for user name and password again and again. I'm sure both username and password are exactly right. But I can not access the folder. Only when I check "Allow guest user access" it will allow me to access my data, Which is not secure enough for me.

View 6 Replies View Related

Ubuntu Networking :: Mounting Samba Shared - Permission Denied

Dec 10, 2010

I have a shared directory on another machine but I can't get it to mount as a samba share. The permission denied doesn't say where/which permission is denied. Is it on the remote on on the local machine? The remote has sharing enabled for the shareddocs directory and after I have mkdir'ed the local mount point I open it's permissions too. The verbose response from mount.cfis looks like this:

mount.cifs kernel mount options: unc=//192.168.1.102shareddocs,domain=WORKGROUP,ver=1,rw ,username=clive,,,,,,,,,,,ip=192.168.1.102,pass=** ******
mount error(13): Permission denied
Refer to the mount.cifs( manual page (e.g. man mount.cifs)

The man page does not have a list of error codes.

View 4 Replies View Related

Ubuntu Networking :: Change Samba Shared Folder's User?

Jan 27, 2011

I installed samba just as described in [URL]

Now I want the shared folders (and the files created in them) to be owned by a user named efil. How do I do this?

View 3 Replies View Related

Ubuntu Networking :: Recursive Shared Media Folders (samba)?

Mar 20, 2011

I currently have samba set up to share to XBMC. One of my shares contains many folders. But the permissions aren't given to access those folder only the container folder.

I can browse the folders recursively with a windows Laptop

How do i enable recursive permissions?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved