In my samba configuration, I have a strange share.
Share name: MyPrinter
Shared folder: /var/spool/samba
comment = lp
read only = No
print ok = Yes
The spool directory /var/spool/samba has been shared as a printer. What will be the harm caused by it? (I don't know who shared such). And I also wanted to know the security issue due to it..
I'm using Ubuntu 9.04 and i've installed my HP Printer and SAMBA successfully. Windows XP clients on my network can successfully print through this shared printer. My problem is, is there a way to put a security password or some sort of authentication before they can print? its because this printer is only dedicated to one department only.
View 2 Replies View RelatedI want to update all the machines in the network from a central repository which is on my master server and whose archive directory is shared through samba.I searched in the man page of sources.list and found that there is an option for this but can't able to implement this. Can anybody kindly tell me the way to do the same.
View 1 Replies View RelatedI am trying to access a shared printer from one Ubuntu PC to another.
On the Server PC, I have the printer working, I have set it to shared, and I have set the server setting to Publish shared printers. I can see and use the printer fine from a windows PC.
On my Ubuntu Client PC, I have samba installed, including smbclient, and all other samba components I can think of. I can see other computers on my home workgroup (Windows and Ubuntu fine). I can also add a printer connected to my windows PC. However I cannot find the printer connected to the other ubuntu PC.
I see the instruction in the Samba guide saying
"Now enter your Ubuntu Samba Print Server (set up as above) IP address in the box on the left titled "smb://"."
However I do not have fixed ip addresses, so what am I supposed to enter in the box. If I enter nothing I can browse the network and can see the host computer, but the printer is not displayed. I can also see the printer connected to the windows PC. How do I 'see' the Ubuntu printer?
I'm trying to set up a Samba printer in Debian linux. The printer is being shared by a computer running windows vista. Some of the information I've got in the process. Sharing seems to be working, the printer seems to be detected and authenticating (I've tried invalid values and the utility I'm using to set things up says it cannot verify when I use invalid values, but with things as they are it claims everything checks out).
When I go into CUPS it says it detects the printer and everything is working. However, printing a test page causes the job to be immediately complete and nothing happens. It seems that the job is getting lost somewhere in the process. Could it be a firewall issue? I feel like the right ports must be unblocked since I can query the computer and verify the printer, etc. I have a laptop with vista which I installed a printer on and was able to print to that computer just fine. So it doesn't seem to be a Vista thing.
Code:
Domain=[OFFICECOMPUTER] OS=[Windows Vista (TM) Home Premium 6000] Server=[Windows Vista (TM) Home Premium 6.0]
Sharename Type Comment
--------- ---- -------
ADMIN$ Disk Remote Admin
C$ Disk Default share
D$ Disk Default share
HP Deskjet D1500 series Printer HP Deskjet D1500 series
IPC$ IPC Remote IPC
print$ Disk Printer Drivers
session request to 192.168.0.10 failed (Called name not present)
session request to 192 failed (Called name not present)
session request to *SMBSERVER failed (Called name not present)
NetBIOS over TCP disabled -- no workgroup available
Code:
OfficePrinter (Default Printer) Description: Location:
Printer Driver: HP Deskjet d1500 Series hpijs, hpijs 3.9.2
Printer State: idle, accepting jobs, published.
Device URI: smb:///192.168.0.10/HP%20Deskjet%20D1500%20series
Code:
ID* Name* User* Size* Pages* State* Control*
OfficePrinter-6* Test Page* anonymous* 17k* Unknown* completed at
Sat 23 May 2009 08:28:39 PM CDT
I am sitting with a slight problem sharing some HP network printers (JetDirect) with my windows machines. I have cups 1.4.4 configured on my Debian PDC with samba 3.5.5. The printers in question, is configured in cups and is working perfectly, but for some reason when I try to add the printers from Win7 or Win Vista I get the following error:
"Connect to Printer Windows cannot connect to the printer Operation failed with error 0x00000006"
I had a look around and it seems that the above error code is tied in with incorrect drivers, but the strange thing is that if I create a new local port on the win machines and specify the shared printers they work. The problem then is that cups does not identify the jobs correctly. The job will be named something like "smbprn.00000264 Remote Downlevel Document" instead of the actual document name. One of the reasons for using cups is to be able to monitor printer usage so this option is a temporary solution in my mind. Can the print$ share be causing it although it is empty and no drivers has been uploaded? Neither the samba nor cups logs give me something concrete to work with (hopefully someone else can spot the problem).
Extract from samba log:
[2010/09/30 09:21:01.734938, 2] lib/access.c:406(check_access)
Allowed connection from (192.168.1.20)
[2010/09/30 09:21:01.740480, 2] lib/access.c:406(check_access)
Allowed connection from (192.168.1.20)
[code]....
Just recently got a few printers connected to the network at my shop and I've managed to get them connected in with samba for the linux clients. Whenever I try to print from one of the clients, the printer will click on and whiz away, but only prints on the first page stuff that looks like this:
Code:
%!PS-Adobe-3.0
%%BoundingBox: 38 24 574 768
%%Title: Enscript Outpu
%%For: User N
It seems to me that the printer isn't processing the postscript data properly (or I'm just not sending it in the right format) but I'm at a loss as to how to go about fixing it.
How to configure samba, cups, whatever else is necessary to turn centOS into a print server that provides the print driver to any client adding a printer shared from the server? For example, I have a Xerox Phaser 6125n and I was able to configure my server to share the printer for clients on the network, but I still have to have the driver available on each client that uses the printer. I want to be able to put the driver on the server and provide it automatically to any client who installs the printer.
Also, this is not as important but rather just an annoyance, I am having an issue with samba that I can't figure out. I have user shares set up on the server but the first time any user accesses their personal share they need to provide their password. How can I set up user mapping between linux and windows accounts so that authentication is automatic? I've done this in the past with Fedora Core 2, but that was a long time ago and the same doesn't work on centOS.
My USB printer is connected to an OpenSUSE 11.2 desktop on a home network. I shared the printer with samba and can print from a Windows XP notebook connected to the network, but whenever I try to connect a Windows 7 machine, I always get the message that Windows cannot connect to the printer.
View 4 Replies View RelatedInstalled fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies View Relatedhow to get clients connecting to an office printer. during a migration from windows server to debian/samba.
We have:
5 windows XP machines one Windows Server 2003 machine, PDC of the old domain One debian Samba PDC (of TEST domain)/print server (with CUPS installeD) running in a virtual machine hosted by the windows server One Toshiba eStudio 3511 printer
Using the CUPS control panel, I've been able to autodetect and add the printer, and it appears as an available share in SWAT for samba. However, the driver isn't perfect. CUPS could only supply drivers for the 3510c, not the 3511.
However, clients on the TEST domain are unable to access it. Doing so gives an error about a local policy preventing a connection to the print queue. I've tried googling this error and the fix that comes up in every result about changing a point and print policy setting, does not work.
however, I've been able to work around the issue. by first logging in as local administrator, navigating to the domain server, then inputting the domain root account credentials at the prompt. That allows me to attempt to connect to printers, but with a different error
"The server for the printer does not have the correct driver installed...."
I very strongly suspect that the 3510 driver actually will work, but it's just not being shared properly. The printer driver share folder is /var/lib/samba/printers, and that directory contains only a few empty subfolders. CUPS did not place the driver there as I would expect, and that is where clients are looking for it.
The thing is, I have no idea where CUPS DID put the driver.
On the old domain, the printer uses drivers for es4511, and looking on the toshiba site, this seems to be what they provide. The Toshiba Site provides a huge variety of drivers, including several windows ones, a universal driver, and a CUPS PPD. Cups asks for an optional PPD during install and I tried supplying that. It said installed successfully, but didn't change anything.
I've tried pasting the windows drivers into /var/lib/samba/printers/W32X86 too, and likewise with other drivers from toshiba's site. but this doesn't change anything either, so I'm at a bit of a loss.
how to install/setup drivers on a samba PDC, for windows machines?
Also relevant, my smb.conf:
anyone see any possible causes of problems?
# Samba config file created using SWAT
# from UNKNOWN ()
# Date: 2010/08/19 13:03:07
[code]....
I have found that there are certain things on the web that I need to print, that simply refuse to work under linux. I have a samba printer server on one of my Slackware boxes and an M$ XP vm under Vbox that can access the server and see the printer. The only problem that I have is that it expects to download a driver from the server which isn't available and the HP driver installer won't install if it doesn't detect the printer. Short of relocating the printer to install the driver, does anyone know how to get the driver installed on the XP host? This is so much easier with my Slack boxes and CUPS!
View 2 Replies View RelatedI am running Ubuntu 9.04, and wish to share a folder to be accessed without logging in via Windows Vista. If I set up the share through the nautilus right-click menu and enable "Guest Account", the share is inaccessible. The folder shows up, but it fails to mount. Vista says that it can see the computer, but not the shared folder.
The folder is
/home/william/shared
The only way I can get it to work is if I change the permissions of the folder /home/william to allow Others to access files.
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
I have installed Canon ImageRunner 2018i on my linux box using CUPS web interface. When I try to install this as a network printer from a Windows XP machine, the windows XP machine keeps asking me for a device driver. Is there a way to configure the printer on CUPS/Samba so that when I try to install it on Windows XP machine as a network printer, it does not ask me for a device driver?
View 7 Replies View RelatedI am looking into encrypting some data on a Fedora samba server. I'm not entirely sure the best way to do this. The server is currently running Fedora 5 but it can be updated if necessary.
I would prefer if the server could be booted up and that no interaction at the server itself have to be done so that users can access their shares.
Is there a way for the data to be encrypted on the server but when the user access the share over samba that it can be accessed?
The research i have done so far seems to point towards methods more intended for a desktop setup. Such as entering passwords at bootup or when opening folders.
I'm trying to set up a remote printer.Printer is on a Vista machineI am on Debian testing.This is the result of smbclient for the remote computer:
Code:
$ smbclient -L //192.168.0.10
Enter rach's password:
[code]...
I'm running Red Hat Linux and CUPS 1.2.4. I can print a test page to a Win 7 shared printer ok. However, when I issue the lpr command from a user or root, it won't print. The CUPS message is "Remote host did not accept data file (1)" and the job just hangs till I cancel it. The only thing I can tell that is different is that when the test page from CUPS is generated, it uses user "guest". When I try to print it using the lpr command, the user is "eddie" or "root". I tried adding a user account named "eddie" to the Win 7 box, I can print successfully from both CUPS and users on several other Win XP boxes.
View 11 Replies View RelatedI have a ciber and my server has Mandriva Linux I have machines with windows xp, 7 and Ubuntu, I haven't been able to add the already shared printer in Ubuntu... the machines with wins haven't given problems in adding the printer. When I try to add it, it can't find it in the network all machines are configured in the same workgroup.
View 1 Replies View RelatedI have Ubuntu Server 9.10 and Windows 98 client. I already installed samba in ubuntu so that windows 98 can access shared files from ubuntu. When I ping both their ip address there is a reply. Ubuntu Server can see shared files from Windows 98 but Windows 98 cannot see Ubuntu Server through Network Neighborhood and their is an error " Unable to connect the network". What are the possible things to solve this problem?
View 4 Replies View Relatediam new to linux. wanted to know-->how to create a shared directory in lunix which should be accessible from windows
View 4 Replies View RelatedI have a Centos 5.3 server with Samba file shares and a shared Samba printer. I am not running a domain.
I recently changed my windows desktop pc from an XP machine to a vista 64 machine... It has a different user name. Everything went pretty smoothly - and the and the vista machine found the smba printer - and even downloaded the driver from the samba server. he printer works OK - and the file shares are fine.
The only thing which is quite odd - is that the Printer Properties dialogue takes more than 30 seconds to come up - and every action you attempt with the dialogue takes a similar amount of time.
I will include below the essence of my smb.conf:
I am trying to setup 2 individual FTP users. They should both have access to the same directory. They both need to be able to read/write into the directory. But, I want them not to be able to write to each other's files (e.g. delete, remove, rename, etc.).
So let's say the shared directory is: /home/ftp/shared/
UserA needs read/write access to /home/ftp/shared/. UserA should only have write access to his own files. UserB also needs read/write access to /home/ftp/shared/. UserB should only have write access to his own files.
It would be a unix box of sorts, but that is the only restriction. I could use whatever software. I am currently thinking pure-ftpd or vsftp but I am open to all ideas.
I want to share my /home/myname/Public/ directory with other users on my system. The problem I am having is that it seems impossible to do so. I can't use a hard link because it's a directory and I can't use a soft link because the target directory can't be found by anyone unable to read my home directory.
So far, the only solutions I can see are:
1) To move everything from my Public directory to one lower on the directory tree (something like /home/Public) and then symlink to that as /home/myname/Public and allow everyone else to do the same.
2) To use something like samba to share the folder, even if only locally.
is doable because /home and /home/myname are on the same volume but there are times on my system when that is not true (I have users with their home directories on thumbdrives and external HDDs for instance and keeping their public files on a separate volume really isn't an option).
Somehow, I have flipped a bit somehwere, and some directories, particularly those shred through SAMBA, have flipped their sorting.
where those things are configured?
I also want to hide .dot files for some shared directory trees.
I'm trying to get GS to print to network Windows printer, but somehow fail to do so . I managed to print through CUPS to that printer but if I use GS with -sDEVICE=cups nothing happens, nothing is printed, CUPS logs remain unchanged... I also found command using smbclient (gs ... | smbclient //machine/printer -U user ... -c 'printmode graphics;print-') but that one fails with "session setup failed: NT_STATUS_REQUEST_NOT_ACCEPTED" Here is why I need it, so maybe you know better way: We need to print thousands of PDF files in one print job (to prevent anybody else to send something else in while we are printing this). I was trying to develop small C program using GS API to achieve this but somehow I fail on something as trivial as print something on shared network printer.
View 3 Replies View RelatedWe are running RedHat Enterprise Server 5. We have a Windows 7 Pro with an HP Printer attached to it, and shared. I can see the printer in RedHat, but everytime I send a print job, it just does nothing but sit there. I've even tried to attach to it via smbclient, and I get the following response: tree connect failed: NT_STATUS_BAD_NETWORK_NAME
View 4 Replies View RelatedI upgrade the system from 11.1 to 11.2 seems everything work fine, no error no warning, after a reboot the consol show : mount error while loading shared libraries: libvolume_id.so.1: Cannot open shared object file: No such file or directory. when I try to repair the system the repair tool cannot find the root partion,
View 1 Replies View Relatedhow to install libxcb-xlib.so.0?When I start one software and it complains that
"error while loading shared libraries: libxcb-xlib.so.0: cannot open shared object file: No such file or directory"
I have lastest libxcb1 installed and searched in my system but didnot find a relevant result.
I installed the latest Gimp beta and it worked fine but then I couldn't open it. I removed it and I reinstalled but it didn't work, so I installed the latest stable version (no beta) and it still does not work, when I open it form Terminal, this is the response:gimp: error while loading shared libraries: libbabl-0.0.so.0: cannot open shared object file: No such file or directory
View 3 Replies View Related