Server :: Cannot Access /var/log/apache2/*: No Such File Or Directory
Aug 24, 2009
I am trying to access log file which located in /etc/log/apache2. I could get into the directory using `su`. I was able to run ls command under the directory and everything was file. I could run a command,
ls -d /var/log/apache2/*
However after I switched to my account, I got an error. sudo ls -d /var/log/apache2/* ls: cannot access /var/log/apache2/*: No such file or directory
I want to use this command in a bash script to get a list of log files. Should I write the script as root and run it as root?
View 3 Replies
ADVERTISEMENT
Aug 13, 2010
it seemed like the most accurate place. Also apologies for any inaccurate terminology, I'm a bit new at this. Running Apache2 on top of Debian 5.0
Anyway, I have irssi set to output logs to a folder accessible by my web server. User permissions are all set up, so it writes to the folder just fine, but when I access the server index in a web browser (i.e., page that says "index of /[directory] at the top) I cannot see the the directory or the logs that irssi is making. I can ssh in and see the folders and files in the terminal, so they are being created. How can I set it so these are viewable through the web server? I tried restarting the server, no effect.
View 1 Replies
View Related
May 13, 2010
The company I work for, as usual, is Microsoft-centric. I'm attempting to integrate my Ubuntu server into the domain to allow domain users to authenticate to the server and access file shares using Samba. Here's my current configuration:
[Code].....
View 9 Replies
View Related
Dec 31, 2010
I have a Debian 5.0.7 installed to my server. I try to install Apache and SVN to this server. I use this tutorial: http://www.howtoforge.com/subversion...-ubuntu-server
But is unfortunately not working.
My apache virtual host configuration file is:
Code:
This passwd file containing 1 user:
Code:
The rights for the passwd file:
Code:
And apache2 is running like this:
Code:
And if I try to login to my page I got an "Internal Server Error" page.
And my error is in the apache log is this:
Code:
So I'm a little bit confused about it. The apache2 should have rights to open this file. I checked it, the file is exist and the apache2 is have rights for it. I don't understand it.
View 1 Replies
View Related
Nov 19, 2010
I have suse10 64 bit installed. I am setting up a svn server on it. After installation and adding the modules ,while reloading the apache2 it's throwing the error as: HTML Code: httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
View 9 Replies
View Related
Dec 9, 2009
I am getting this error
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80
no listening sockets available, shutting down Unable to open logs failed!
also what is 68.178.232.100
View 1 Replies
View Related
Apr 21, 2011
Can't log into my XFCE desktop like I normaly do. all the sudden I get notified that my xsession lasted less then 10 secondsLooking at the error I can see this:
Unable to access file /home/username/.iceauthority: No such file or directory
Using failsafe I can start a terminal. From terminal I tried to start X
Code: sudo startx Result: Running on desplay:0
So I tried to run this;
Code: sudo startxfce4 And I get up a graphical desktop.
So this is not a critical situation as I easily can use this method to log on, but as there has been something causing this I would like to be able to resolve this nonetheless. Btw it is not the old chmod trick in play here, cause my .iceauthority file is gone alltogheter.
View 6 Replies
View Related
Jun 1, 2010
I'm trying to setup apache2 to drop a core file when it crashes. I know that you need to set the CoreDumpDirectory directive in /etc/apache2/apache2.conf and run "ulimit -c unlimited" from the command line (and restart apache after the ulimit command). But, on a reboot, even though the output of "ulimit -a" shows unlimited, apache2 will not create a core dump file unliess you set ulimit -c unlimited again and restart apache2. There must be a way to configure apache2.conf or something so that ulimit -c unlimited is set prior to apache2 starting, no?
View 2 Replies
View Related
Nov 11, 2010
I have a server running both apache2 (default port) and squid (3128 port) I set an squid ACL so my LAN 192.168.1.0 gets filtered. ok all works fine except for external web petitions. When i try to access my web server from the outside, using my public ip, i get a SQUID DENIED. i guess that is because in squid ACL's there is something like: http_access all deny at the end of the file. How can i allow external petitions to my web?
View 4 Replies
View Related
Apr 30, 2011
Code:
count=`ls *.php -l | wc -l`
if [ "$count" -ne "0" ]; then
mv *.php ~/Desktop/PHP
[code]....
With this code I am attempting to ensure a php file exists, then attempting to move it to another folder. My script has 40 or so extensions, this is one of many. My problem is this: if the current folder contains no php files i receive an error.
ls: cannot access *.php: No such file or directory
Typically I would use 2> /dev/null to handle output suppression but in this case it prevents the variable assignments.
View 5 Replies
View Related
Mar 16, 2010
I ran into a bit of trouble making a bash script. (Desktop is a directory, and I try to get it's modification date)
Code:
lamp:~# cmd='ls -l Desktop | grep -o "....-..-.. ..:.."'
lamp:~# $cmd
ls: cannot access |: No such file or directory
ls: cannot access grep: No such file or directory
[code]....
When I type in the command directly, without using an inbetween variable, it works fine.
View 3 Replies
View Related
Apr 19, 2011
I am new to Linux and need to add user access to a particular directory on a Linux server (SUSE 9.1).I am able to access the directory via telnet however I do not know the commands to add the user. userBFA needs readwrite access to the SMF directory. Please let me know if any additional information is needed.
View 5 Replies
View Related
Jan 20, 2011
I can access my NAS box with telnet but the file I am looking for is not in the expected directory. Of course I could go through all the directories using ls -a but that would take days. Is there a command I can run to look for the file for me using the telnet console?
View 3 Replies
View Related
Oct 22, 2010
here is the most importent part of the file setup.shhere link to pastebin:http://pastebin.com/mwQ1UArHand here the part:
cd
chmod 777 ../bin/panel
cd ../bin/panel
[code]....
View 2 Replies
View Related
Nov 8, 2010
I have a multi user system for my roommates and myself that has separate folders for each of us. I've got user authentication working with samba, but unless I set every file and folder readable/writeable by all users, I can't browse it or edit the files.This isn't ideal as the shares are open to other users access, so I'm hoping there's a way to keep folders at 750 and files at 660 while allowing samba users to browse, delete and edit.Also, the samba share is actually a mounted NFS share from another server. Both the NFS server and the Samba server have the same users/uid's. When a file is created from a Windows host via the Samba client, the NFS server's permissions do show that the correct user owns the files, but since the files aren't mode 666 but 640 I can't edit or delete the file.
View 4 Replies
View Related
Jan 24, 2011
My home directory's permissions allow only myself access to it. Is it possible to put a file inside my home directory with.. say.. full permissions, and create a symlink to it so other users can access that file alone inside my home folder? System is Ubuntu Karmic.
View 2 Replies
View Related
Mar 19, 2009
I'm trying to install Adobe Reader 8 and the command #dpkg -1 AdobeReader_enu-8.1.3-1.i386.deb comes up with the message error processing AdobeReader Cannot access archive. No such file or directory. Error was encountered while processing.
View 9 Replies
View Related
Feb 26, 2011
I have a server running Ubuntu server edition with SMB server all set up and running. I've set up the main root of the drive to be shared and I've set up a user in /etc/samba/smbusers to say root = "joeflood" so I can sign in as root using the username "joeflood". This works and I have read/write access to the filesystem (yay!). However, if I browse to /home/javawag (my main user home directory), I no longer have write permissions! I can see all the files in there and read them no problem, but writing is a no-go. I'm logged in as root though?! Btw, I can login via SSH and create folders/etc as root in the /home/javawag folder, and they showed up in the SMB mount on my mac too.
View 1 Replies
View Related
Jun 30, 2010
I have a file server on my network. It is accessed mainly by linux machines throught NFS, but sometimes I need to access it from windows, and I managed to get Samba up and running with only one share with no password, which is what I want.My users have their "private" folders which are just chmodded 700, and under NFS it works fine, but on samba I get, of course, access denied.How can I configure samba so that it asks a password to access those directory? They can become separate shares, and have their own username and passwords (not the ones in /etc/passwd in the server), I don't care.
View 1 Replies
View Related
Oct 23, 2010
I am running shell command through C program using system() routine.
I am executing "opcontrol --status" an executable using the this routine and I get the following error. access: unix error (2) No such file or directory
But when I give the complete path to the executable it runs perfectly.
The executable is installed in "/usr/local/bin/" And the path variable has this path.
View 1 Replies
View Related
Mar 8, 2010
CentOS 5.x with AD authentication. My samba servers(3) are all reporting the same error:
Quote:
Unable to open new log file /var/log/samba/xxx.xxx.xxx.xxx. No such file or directory.
lib/debug.c:reopen_logs(625)
The xxx.xxx.xxx.xxx is the ip address of the station accessing the samba share I assume.
View 4 Replies
View Related
Mar 8, 2011
I'm running the turnkey linux version of joomla and I need to use PHP's mail functionality to send a notification email from a page (separate from joomla content) . PHP's native stuff is rather plain and I find myself needing the functionality of PEAR. So I've installed PEAR via aptitude, but it has installed to /usr/share/php.
how do I include these files from php scripts? Firstly, the files are owned by root, the www-data user doesn't have access. It also appears that the permissions on the files may need to be modified. Some php files don't have the execute flag (shouldn't they)? I recognize the point of having a centralized location for updates and sharing, so I don't want to just copy the files to my web directory (/var/www).
View 2 Replies
View Related
Sep 16, 2010
I didn't know exactly where to put this, but here it goes:For the record, I have Apache2 on Ubuntu.OK so I have a "svn" subdomain for SVN repositories. The repositories are actual separate repositories, not a big one for all. So I'm using SVNPath not SVNParentPath (please don't suggest this as a possible fix).
The problem is I want to be able to list the repositories (or even put a blank page for that matter) at svn.mydomain.com. All repositories have a svn.mydomain.com/myrepository path with a VirtualHost for each. So when I create another VirtualHost just for the / path, it overrides all the SVN VirtualHosts, as it covers / and all sub-directories.
I would like a way to set that VirtualHost to affect just the root directory, without the sub-directories. Or to make the SVN VirtualHosts override it. Either way, is this possible? What approach should I take? Thanks!
View 1 Replies
View Related
Sep 16, 2010
I am using Mandriva 8 as my local server, i want to configure sftp sever by which particular user can access particular directory of our local server by using ftp client, can anyone tell me how can i do it?
View 1 Replies
View Related
Jun 15, 2010
I installed pure-ftpd over ubuntu 10.04.
I want to know how can I remove authentication from ftp server to access in ftp directory from browser.
View 3 Replies
View Related
Feb 9, 2010
i have a web site and i need to forward all requests to the same page. Basically i would like to show a maintenance page while we are working with our database behind the application and in the meantime i would like to redirect all url in the root directory as following :
http:[url].....
http:[url]....
i tried to perform the action using mod_rewrite in this manner :
Code:
RewriteEngine On
RewriteRule . http://www.mysite.com [L][code].....
The webpage at http:[url]....has resulted in too many redirects. Clearing your cookies for this site or allowing third-party cookies may fix the problem. If not, it is possibly a server configuration issue and not a problem with your computer.
View 2 Replies
View Related
May 11, 2011
I have been searching the web and Ubuntu forums all day looking for an answer to what I initially thought would be a simple thing to do. I have set up a lamp server and started creating my network site, however was not long before I ran into an issue with fire fox not allowing me to access locally linked files that are shared on the network which works fine in IE. after several hours of trying to find a work around, I have been unsuccessful in creating a link that would work in both IE and FF.
so I got this bright idea see, to just make the website include the network shared content, unsharing them of course and simply adding them to my Apache server, well the more I read the more confusing it all became. do I use simlinks or do I create a server for each location/hard drive?
I really need a how to for big dummies on adding additional directories to Apache similar to adding virtual directors to IIS for windows.
View 3 Replies
View Related
May 21, 2010
Running Ubuntu 10.04
Installed apache2 and php5 and it works in /var/www
but once I point it to a home directory it won't serve php. Normally I have used phpcgi but I am currently trying to use regular php.
Here is my default file.
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /home/greensmoothiegirl/public_html
<Directory />
[Code]....
View 4 Replies
View Related
Jan 28, 2010
I'm fairly new to Linux and very new to Squid and am having authentication issues! I am using Oracle Enterprise Linux (which is basically Red Hat without the branding) and wanting to use Squid Proxy Server for web access with authentication to Active Directory. I've found a number of articles about this online and all of them say to use auth program squid_ldap_conf which should be in /usr/lib/squid/. I don't have a squid directory in /usr/lib for starters and my squid binaries are in /etc/squid but there is no squid_ldap_conf in there either. I have installed the latest version of Squid (3.0) to see if that helped but I still cannot find the authorisation program.
View 3 Replies
View Related
Aug 31, 2009
I have been working on this for a few hours now and still haven't been able to track down whats going on. I just switched servers and put a fresh debian install on with apache2 + custom suexec + php5(fcgi). now when i upload a file to the site it wont upload, so i tracked down the issue. its the /tmp directory that root tmp. its at 100% so i restart the /etc/init.d/apache2 process and the /tmp directory is automagically cleared to 20% used and i can upload again. so i figure ok its got to be a setting. i looked in all the conf files conf.d the php5 conf files and no where do i have a /tmp directory set. so i think OK I can build a cron to clear the tmp directory every 10 mins till i find the issue, but alas, when i go into the tmp directory There are NO files to delete!!! wtf. holy crap. and all that goodness, this is crazy, how can you have a tmp directory that is not being written to, from all i can see, so i think ok it might be a hard link, i checked, in all root and sub root directories no hard links to tmp, no soft links to temp either. and if i sit in my /tmp directory and do a df -h after some uploads its going from 20% so 23% and up, but i do ls -alh and nothing, then ls -al and watch bytes, nothing , so this is very strange. has anyone encountered something like this? is it possible that this is a hard link thats hidden somewhere or some other extreme function i have never heard of?
View 8 Replies
View Related