Running Ubuntu 10.04
Installed apache2 and php5 and it works in /var/www
but once I point it to a home directory it won't serve php. Normally I have used phpcgi but I am currently trying to use regular php.
Here is my default file.
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /home/greensmoothiegirl/public_html
<Directory />
[Code]....
I can't seem php5 work with apache2. I am getting the text openning instead of php. I think this is infamous problem, found many suggestions adding AddType application/x-httpd-php .php, did that in/etc/apache2/apache2. conf and /etc/apache2/httpd.confwith no luck, it's still opening text
View 6 Replies View RelatedI'm running an up-to-date install of Squeeze, and I'm having an annoying issue where php5 won't parse in userdirs (/home/*/public_html), although it works fine in the main document root (/var/www). I found this bug: [URL] Which seems to say the issue is fixed. However, the last comment for this bug suggests it is still an issue for some.
I've had a look at: /etc/apache2/mods-enabled/php5.conf and commented out the lines suggested in the comment:
[Code]....
..and it still doesn't work. I've googled this and can't find an answer. Anybody know? Am I missing something simple?
my server :
ubuntu jaunty 9.04 32bits
apache2 2.2.11-2ubuntu2.5
php5 5.2.6.dfsg.1-3ubuntu4.5
I have a problem uploading large files : from 0 to 1 048 576 000 octet (1000mega) : OK greater... KO... i mean even no file uploading temporaly in /tmp I have tried using "jyraphe" or "openupload" in the server part and from mozilla or IE in the client part.... always the same thing...
php.ini :
post_max_size = 5G
upload_max_filesize = 5G
I even set "LimitRequestBody 10000000000" in /etc/apache2/sites-available/default thinking the default value (not set OR 0) didnt work but...
I'm trying to run apache2 with mod_ssl and php support and I need curl too. When php5-curl is installed apache doesn't work with ssl and I've got this one in error.log:
Code:
[Thu Jun 03 10:00:39 2010] [notice] child pid 26013 exit signal Segmentation fault (11)
[Thu Jun 03 10:00:39 2010] [notice] child pid 26014 exit signal Segmentation fault (11)
It's strange because it works well without ssl. The problem occures only when I'm trying to access and SSl page, doesn't matter if it's a html page or php file. I'm using Ubuntu 10.06 Desktop version which is x64. Below are the packages which I've got installed related to apache php and curl. I successfully compiled php5 from source, but the problem still exists so probably it's somewhere in apache?
currently I am using Ubuntu 10.04.I want to install mysql, php5 and apache2 server in my machine. I have tried this- aptitude install mysql-server mysql-client
But the outcome is
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
[Code]...
I am new to linux. Currently I am using ubuntu 8.10 desktop operating system. As part of my academic project. I need to configure webserver to access from external. I installed all these using apt-get packages but when it comes to configuration. I am really not understanding. I read some documentation about this configuration but I couldn't get and fully in confused. I formatted my machine 3 times. When I tried to use localhost in firefox its working fine.
1. I need to change port from 80 to 7574. In port.conf I changed, in place of 80. I kept 7574. After that I restart and tried to access but its not working.
2. My admin provide to me. 7574 port to route it into my machine. When the user hits for suppose:
59.160.188.190:7574/project/route.html
It should goes to:
192.168.202.236:7574/project/route.html
Project folder is in /var/www
I wrote the form, to update user vehicle details. They can able to update their details in mysql server from any where.
3. Just I need the application user can access my files and update from their desktop by using path:
59.160.188.190:7574/project
How to update user details (there is no login form is directly visible to every one) in server from their desktop. What I need to configure.
I have apache 2.2.3 installed with php5 and libapache2-mod-php5. The server displays web-pages fine, but when I try to load a .php file, nothing shows up. There aren't any errors, not in the browser and not in the Apache2 error logs... just nothing shows up. When I look at the page source on the browser, all the HTML code is there, but all the PHP code is gone, as though it was parsed. I can't get any output to show up though, echo and print both do nothing.What could be the problem?Example:
Code:
<html>
<body>
[code]...
I have been trying to get a home server to do what i want but just not getting there.I only need it to serve up the files to a home ( non internet ) network.I saw that filezilla also comes in a Linux version also. I am going to give it a try next. Anyone use the linux version of filezilla ? What happened did it work not work ?
View 3 Replies View RelatedI have an interdependent collection of scripts in my ~/bin directory as well as a developed ~/.vim directory and some other libraries and such in other subdirectories. I've been versioning all of this using git, and have realized that it would be potentially very easy and useful to do development and testing of new and existing scripts, vim plugins, etc. using a cloned repo, and then pull the working code into my actual home directory with a merge.
The easiest way to do this would seem to be to just change & export $HOME, eg
cd ~/testing; git clone ~ home
export HOME=~/testing/home
cd ~
screen -S testing-home
# start vim, write/revise plugins, edit scripts, etc.
# test revisions
However since I've never tried this before I'm concerned that some programs, environment variables, etc., may end up using my actual home directory instead of the exported one. Is this a viable strategy? Are there just a few outliers that I should be careful about?
I have installed LAMP on ubuntu server 10.04. where can i find the installation folder...the extension folder and so on ? i tried the command locate php but it didnt return the path i wanted.
View 2 Replies View Relatedi have installed php5.apt-get install php5 installed fine but when i got to a php program its looks for it in
line 90: /usr/bin/php: No such file or directory
whereis:
~# whereis php5
php5: /usr/bin/php5 /etc/php5 /usr/lib/php5 /usr/share/php5
iv added a symlink to bin as u can see above but thats no good as the php is looking for it in /usr/bin/php how can i get /usr/bin/php. drag php5 folder in there and rename it?
I'd like to use PHP5.2x instead of PHP5.3x on my Ubuntu 10.04. There is a small bug in Drupal where tweaking Views causes an error which seems to be associated with php5.3.
So, how would I regress to using 5.2x on Ubuntu?
I have a strange problem when I do SSH to a FEDORA9 based Linux Server.
[Code]....
When I login using "adah" username in TELNET I am automatically directed to my home directory at location "/media/disk-1/home/adah". But when I use SSH to login using the same username I get the following message Code: Could not chdir to home directory /home/adahaj: Permission denied
I have a dual-boot macbook with an OS X partition and an ubuntu partition. When I first installed ubuntu, I changed my home folder to my OS X home directory to synchronize all my files from both. My home directory is now /media/sda2/Users/username/. In a regular home folder, the icons for Documents, Music, Pictures, Movies, etc. are different (not just with emblems, but actually different icons). But when I changed my home folder, these subfolders' icons stayed the same as regular folder icons and I can't figure out a way to change that default setting. I know how to change the icons for each folder manually, but these changes don't appear everywhere (i.e. nautilus, places, etc). Furthermore, every time I change my icon theme, I would have to manually reassign icons for these folders. Is there a way to globally change the folder icons for these folders?
View 2 Replies View RelatedI have a secondary disk which holds a /home directory structure from a previous install of Linux. I installed a new version on a new primary drive and mounted this secondary drive as the new /home. Problem is, even though the users are the same names and I can access the home directories for the users, I cannot login directly to their home directories, as I get the following error: -
Code:
login as: [me]
[me]@[machine]'s password:
Last login: Wed Jan 6 18:34:33 2010 from [machine]
Could not chdir to home directory /home/[me]: Permission denied
[[me]@[machine] /]$
Now, since the usernames are correct and the users are in the passwd file with the correct home directory paths, could it be user ID's that are different or something else? It's not as though I cannot access the home directories for the users, simply that I cannot log directly into them from a login prompt.
Is there anything special about a home directory before users' home directories are stored there, or is just as typical as any other "empty" folder?Let me just cut to the chase, but please no ear ringing about the folly of messing around as root, particularly with directories at root level. I know it's considered stupidity, but I deleted my home directory.
Is there an easy way to restore a working home directory? I tried copying /etc/skel under root, but I'm not sure what a home directory should look like once it has been restored. Besides . & .., there were .screenrc & .xsession in my home directory when I copied /etc/skel. Are these files suppose to be in "/home" or "/home/~" or both?
I configured my apache2. On my Intrepid I had apache2.0 while on my Karmic I have a apache2.2. Aftere configuring I tested it and got a an error page when I tested it in my web browser. I looked into the log file that showed the following error "[client 127.0.0.1] (13)Permission denied: access to /my_dir/ denied".
It appears apache2.2 can't access directories in my home folder. File system rights for the files and folders are correct. There is no AppArmor profile for Apache. User settings in "/etc/apache2/apache2.conf" file are correct. The inaccessible folder in "/etc/apache2/sites-available/default" looks as follows:
[Code]...
A trick using symbolic links didn't work either. On my previous Intrepid with Apache 2.0 my pages worked like a charm. Now on my current Karmic (before apache2.conf was pre configured, now it's not) with Apache 2.2 my pages are wrecked. how I can make Apache2.2 access folders in my home folder and which settings are needed in default file for that?
I need to specify a different path to home directories on a particular server than what LDAP contains for the users, besides using a symlink. E.g. "/Users/jdoe" vs "/home/jdoe" I don't want to change the actual LDAP attributes, just want a particular server to point them in the right direction (Ubuntu 10.04).
I'm assuming it's something I could probably set in pam configurations?
I am trying to access log file which located in /etc/log/apache2. I could get into the directory using `su`. I was able to run ls command under the directory and everything was file. I could run a command,
ls -d /var/log/apache2/*
However after I switched to my account, I got an error. sudo ls -d /var/log/apache2/* ls: cannot access /var/log/apache2/*: No such file or directory
I want to use this command in a bash script to get a list of log files. Should I write the script as root and run it as root?
it seemed like the most accurate place. Also apologies for any inaccurate terminology, I'm a bit new at this. Running Apache2 on top of Debian 5.0
Anyway, I have irssi set to output logs to a folder accessible by my web server. User permissions are all set up, so it writes to the folder just fine, but when I access the server index in a web browser (i.e., page that says "index of /[directory] at the top) I cannot see the the directory or the logs that irssi is making. I can ssh in and see the folders and files in the terminal, so they are being created. How can I set it so these are viewable through the web server? I tried restarting the server, no effect.
I'm running the turnkey linux version of joomla and I need to use PHP's mail functionality to send a notification email from a page (separate from joomla content) . PHP's native stuff is rather plain and I find myself needing the functionality of PEAR. So I've installed PEAR via aptitude, but it has installed to /usr/share/php.
how do I include these files from php scripts? Firstly, the files are owned by root, the www-data user doesn't have access. It also appears that the permissions on the files may need to be modified. Some php files don't have the execute flag (shouldn't they)? I recognize the point of having a centralized location for updates and sharing, so I don't want to just copy the files to my web directory (/var/www).
I didn't know exactly where to put this, but here it goes:For the record, I have Apache2 on Ubuntu.OK so I have a "svn" subdomain for SVN repositories. The repositories are actual separate repositories, not a big one for all. So I'm using SVNPath not SVNParentPath (please don't suggest this as a possible fix).
The problem is I want to be able to list the repositories (or even put a blank page for that matter) at svn.mydomain.com. All repositories have a svn.mydomain.com/myrepository path with a VirtualHost for each. So when I create another VirtualHost just for the / path, it overrides all the SVN VirtualHosts, as it covers / and all sub-directories.
I would like a way to set that VirtualHost to affect just the root directory, without the sub-directories. Or to make the SVN VirtualHosts override it. Either way, is this possible? What approach should I take? Thanks!
I have Ubuntu Karmic. I chose to install with an encrypted home directory. Recently I got a warning that I only had 2GB of drive space left. This is mostly because of my videos. So I went and bought a new hard drive and partitioned it and made 1 ext4 partition and copied my videos all to the new hard drive. I added a line in my fstab to mount the new hard drive to ~/videos, but when I reboot the computer, there is a screen saying something like "error mounting /home/me/videos, press S to skip or something else to reboot". If I press S to skip, then when my system comes up there is a video directory but it's empty because my other hard drive didn't get mounted. I can run sudo mount /dev/sdb video/ and it will mount fine and I can see all my videos, so why can't fstab mount it? Does this have something to do with my encrypted home directory?
View 14 Replies View Relatedi have a web site and i need to forward all requests to the same page. Basically i would like to show a maintenance page while we are working with our database behind the application and in the meantime i would like to redirect all url in the root directory as following :
http:[url].....
http:[url]....
i tried to perform the action using mod_rewrite in this manner :
Code:
RewriteEngine On
RewriteRule . http://www.mysite.com [L][code].....
The webpage at http:[url]....has resulted in too many redirects. Clearing your cookies for this site or allowing third-party cookies may fix the problem. If not, it is possibly a server configuration issue and not a problem with your computer.
I have been searching the web and Ubuntu forums all day looking for an answer to what I initially thought would be a simple thing to do. I have set up a lamp server and started creating my network site, however was not long before I ran into an issue with fire fox not allowing me to access locally linked files that are shared on the network which works fine in IE. after several hours of trying to find a work around, I have been unsuccessful in creating a link that would work in both IE and FF.
so I got this bright idea see, to just make the website include the network shared content, unsharing them of course and simply adding them to my Apache server, well the more I read the more confusing it all became. do I use simlinks or do I create a server for each location/hard drive?
I really need a how to for big dummies on adding additional directories to Apache similar to adding virtual directors to IIS for windows.
I have been working on this for a few hours now and still haven't been able to track down whats going on. I just switched servers and put a fresh debian install on with apache2 + custom suexec + php5(fcgi). now when i upload a file to the site it wont upload, so i tracked down the issue. its the /tmp directory that root tmp. its at 100% so i restart the /etc/init.d/apache2 process and the /tmp directory is automagically cleared to 20% used and i can upload again. so i figure ok its got to be a setting. i looked in all the conf files conf.d the php5 conf files and no where do i have a /tmp directory set. so i think OK I can build a cron to clear the tmp directory every 10 mins till i find the issue, but alas, when i go into the tmp directory There are NO files to delete!!! wtf. holy crap. and all that goodness, this is crazy, how can you have a tmp directory that is not being written to, from all i can see, so i think ok it might be a hard link, i checked, in all root and sub root directories no hard links to tmp, no soft links to temp either. and if i sit in my /tmp directory and do a df -h after some uploads its going from 20% so 23% and up, but i do ls -alh and nothing, then ls -al and watch bytes, nothing , so this is very strange. has anyone encountered something like this? is it possible that this is a hard link thats hidden somewhere or some other extreme function i have never heard of?
View 8 Replies View RelatedI'm using Mac OS X's Terminal.app shell to compile and run Fortran programs. One such program resides outside of my home directory (it is in the Applications folder, which resides on my hard drive but seems to be outside of my home folder). How can I navigate into this directory using Terminal.app to run the programs that reside there?
View 7 Replies View RelatedI have suse10 64 bit installed. I am setting up a svn server on it. After installation and adding the modules ,while reloading the apache2 it's throwing the error as: HTML Code: httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
View 9 Replies View RelatedI am getting this error
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80
no listening sockets available, shutting down Unable to open logs failed!
also what is 68.178.232.100