SUSE :: Add The Windows Partition To The Boot Loader Settings?
Apr 29, 2010
I'm running SuSE 11.2, dual booted with Windows 7. SuSE installed fine, but when I rebooted, it went straight to windows and didn't give me the option of booting into SuSE. I reinstalled SuSE and went into the boot settings in Yast. When I rebooted, neither Windows nor SuSe would boot. I ran a system repair from the SuSE disk, at the boot loader settings, it displays the SuSE Linux partition and the Failsafe Linux recovery partition. I did not format any drives in the system repair. How do I add the Windows partition to the boot loader settings?
I let a 'friend' use my laptop over the weekend. Now when I turn it on, it loads the BIOS details, then says no active partition, then no OS cannot be found.
It looks like they have deleted the partition with SuSE with the Grub Loader.
I cannot load up SuSE or Windows 7!
Any ideas on how to recover the boot to load Windows 7?
I have tried using the Windows 7 install disc to repair - but it does not recognise that Windows is installed and wants to do a clean install only.
Is it worth trying to reinstall SuSE and hope it detects Windows on the other partition? (I assume it is still there!)
I installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
I am a new Ubuntu user, and I am attempting to set Windows 7 64 bit as my default OS in the boot loader instead of Ubuntu 10.10. I have entered the command gksudo gedit /boot/grub/menu.lst into terminal, and the menu.lst file does open. However, this file appears to be completely blank, which does not seem to make sense and is preventing me from changing the boot order.
is it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
install fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"
I'm running Suse 9 service pack 2. I have the recovery cd in the system and have issued the following command /sbin/mkinitrd -m "reiserfs aacraid mptscsih jbd ext3" -b /tmp/kevin/boot -d /dev/sda2
They system responded with : Root Device: /dev/sda2 (mounted on / as reiserfs) Module List: reiserfs aacraid mptscsih jbd ext3 You may have to update your boot loader configuration QUESTION: How do I update the boot loader from the where I am now?
Note: the reason that I need the bott information is because during maintenance the module reiserfs was left out the kernel file when the a previous mkiniterd command was issued cuasing /dev/sda2 not to mount and the system to go into a kernel panic.
I having a problem getting my grub loader to see one of my hard drives. I added a drive, and my grub loader lost track of where everything was. I couldn't get my old linux (Red Hat 9) so I installed SuSe on my new hard drive. But I need my be able to boot from my old hard drive because it has apps that only run on the earlier version. From /proc/partitions the old hard drive is sdd
major minor #blocks name 8 0 976762584 sda 8 1 2104483 sda1 8 2 20972857 sda2
Now after my experiments with Open Indiana on another partition, I have rewrite my Suse Grub, that was as in / suse partition as in MBR. Suse partition is intact as well as files in /boot/grub, but in MBR is boot loader of Open Indiana as primary. How can I get back Suse boot loader. On Installation media under Rescue system I didn't find any option for re-installation of boot loader.
P. S. Now I can run Suse completely in Gui without any problem, because, I made some changes, in Open Indiana boot loader, but I would like return a Suse Grub.
I am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
i have windows 7 installed on my laptop and working fine..i want to install Open Suse 11.2 along side. I tried installing by booting with DVD for Suse. But it gave me warning to delete the windows partition.I would like to keep the partition intact with windows 7 and install Suse. Any suggestions ?I can create partition on my laptop but i do not want to modify the current windows structure.
I was dual-booting XP/Win7... Uninstalled Win7 and reset boot loader with XP's Went to install 10.04 for dual-boot and it is showing that loader as "Widows 7 loader"
A few days ago my Laptop wouldn't hibernate in Windows 7, I managed to fix this problem by going into Windows' Disk Management tool and setting the C:/ Partition as the active partition, this fixed my hibernation issue, however I have just noticed that now when I boot my laptop my GRUB menu no longer appears, instead it just loads Windows straight away as if it was the only OS on my laptop.
I've confirmed it's something to do with my recent Disk Management change as I booted up GParted, removed the boot flag from Windows and when a rebooted my GRUB menu reappeared.
Not sure on how I can both have Windows as the active partition while being able to keep GRUB working also.
My Partition Setup is as follows:
/dev/sda1 C:/ Windows 7 (NTFS) (Boot Flag Set) /dev/sda2 D:/ DATA (Documents and stuff) (NTFS) Unallocated 1 MB /dev/sda3 Extended 146.49 GB (LBA Flag Set) /dev/sda5 Linux Swap 2.01 GB /dev/sda6 ext4 20.00 GB /dev/sda7 ext4 124.46 GB Unallocated 10.00 MB
I am tying to add Ubuntu 10.04 desktop i386 to my Windows 7 PC. I do not want to mess with the Windows boot loader, so as the sentence from the guide at the bottom states, tried to put GRUB onto the newly created partition for Ubuntu. I could not because upon choosing the device (which turned out to /dev/sda5) , the "OK" button was disabled
"Manual" option was chosen above - on a second try, I chose "use all available free space" and Ubuntu created #5 and #6 on SCSI1 (0, 0, 0). The new device was /dev-sda-1, but again, Ubuntu would not put the boot loader on it.
"If you have a problem with changing the MBR code, you might prefer to just install the code for pointing to GRUB to the first sector of your Ubuntu partition instead."
I want install 10.10 Maverick on a new partition alongside my OS X and 10.04 Lucid installs to see if it works on my machine. I'm a little unsure about some things.
1)Do I need to install the GRUB boot loader on this new partition?
2)Can I use the same swap space or is recommended to create a new swap?
Disk /dev/sda: 60.0 GB, 60011642880 bytes 255 heads, 63 sectors/track, 7296 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x58b258b2
[Code]....
There already exist an os XP before my installing of ubuntu.When I installed my ubuntu 9.10, I selected to install grub2 on the logical partition sda7. But when I typed command sudo dd if=/dev/sda7 of=mbr bs=512 count=1, I found that the file mbr was eerily full of zero bytes. How does this happen? Or grub2 can't be installed on a logical partition? But it works very well along with win7 rather than XP.
A bad install of linux gave me a grub that won't go away. My only hope of restoring my Windows XP and retrieving the data that was backed up (most wasn't) is to somehow access the recovery partition. That's still there. The primary partition was wiped out. This is a remanufactured system: I -don't- have a Windows CD. I -don't- have fdisk. I -don't- have any of the utility disks I'd normally use (they're 300 miles away, buried in snow and ice right now).
I do have a disk and a thumb drive with the Windows boot files on it, but grub doesn't recognize these. If I could just get rid of that grub file, I think I could boot from either the thumb drive or the cd, or even the partition with the recovery files on it, but I can't get rid of grub. I think even if I could get fdisk on either a cd or thumb drive, grub would override it. Any one know how to kill that file WITHOUT fdisk and WITHOUT the Windows CD? I have live Linux disks, Ubuntu 8.10 and 10.10 have been the most promising, but still can't do this.
One thing I notice and hope someone here can steer me in the right direction. When I start up my computer I have the list of options to choose from, if I choose to boot into Win 7 I am the presented again with another boot menu from windows. I would like to remove the Windows boot loader.
HDD 1 (sda) with Windows XP installed on sda1 and four more partions.
HDD 2 (sdb) with three NTFS-Partitions (sdb1, 5 and 6) and Ubuntu 10.04 (sdb7) + Swap-Partition (sdb8).
I would like to boot Ubuntu using the Windows XP boot loader, i.e., having an entry there to choose Ubuntu and start my installation of Ubuntu 10.04. I have installed Ubuntu 10.04 on sdb7 and told the installer to install the grub2 boot loader to /dev/sdb (should it have been /dev/sdb7?). When using the boot selection option of my bios and choosing the second HDD Ubuntu starts without problems.
I used dd if=/dev/sdb of=bootsect.lnx bs=512 count=1 to copy the mbr of my second HDD and copied the file bootsect.lnx to my c: drive. Then added C:ootsect.lnk = "Ubuntu Linux" to my Windows boot.ini. When rebooting my computer I get the option "Ubuntu Linux" in the XP boot loader. Choosing it I come to a black screen with a blinking white cursor. All I want to do is not use Grub 2 as my primary boot loader but instead leave my WinXP installation untouched and start Ubuntu from within WinXP boot loader. This has been working just fine with my old Ubuntu installation.
i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:
c: 97 gb d: 150 gb e: 150 gb f: 100 gb g: 50 gb and 38 gb unlocated part
in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;
Can I separately install a third party boot loader which can boot both Windows and Linux (Ubuntu) . I want to use a boot loader other than the boot loaders which come with these operating systems. I am trying this out of curiosity.
i've a little problem with the grub loader. I've two OS in my laptot: Ubuntu 9.10 Karmic Koala 64bit and Windows 7 64bit. But i can't boot Windows 7 from the grub loader. The grub still load the /dev/sda1 partition that is the recovery partition of the laptot, while windows 7 is in the partition /dev/sda6. I tried to modify the path in the grub.cfg, but still load the wrong partition, how i can do?
I have two hard drives, one (hard drive C) is 250GB and is the first hard disk. The second (hard drive Z) is 1000 GB and is the second hard disk in order. There used to be windows XP on C and Windows 7 on Z.
Because I installed 7 to Z from XP which is on C, it put the Windows Boot Loader on hard disk C. I didn't know this until now.
When I installed Fedora, I gave it all of C to install on. That messed up something because the Windows Boot Loader was on that drive, so grub didn't list it in the OS's to load. I had to add it manually, and got it working correctly so it had an entry for the partition that Windows 7 was on. This didn't work however, because Windows 7 on drive Z didn't have it's NTLDR on that drive, so now I have a 7 installation without an NTLDR on Z and a Fedora install on C. I am sure grub is working properly because when I change the load order of the hard drives to load Z first, it gives the same error:
NTLDR is missing Press Ctrl + Alt + Delete to restart
or something along those lines.
Is there a way to get Z to have an NTLDR again and be able too boot Windows 7? I really hope I didn't mess up my entire 7 installation because of this.
I just installed Fedora 11 (I installed over the Fedora 10 installation I had already installed)..
-Before I would have Grub give the choice of Fedora 10 or Windows (Where Windows would load the Win Boot loader for my options of Windows 7 and Windows Vista)
-NOW: I have the same options.. But when i select Windows (It loads the Recovery partition) instead of the Windows Boot Loader...
Here is my fdisk -l
Device Boot Start End Blocks Id System /dev/sda1 1 192 1536000 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 192 5414 41943040 7 HPFS/NTFS Partition 2 does not end on cylinder boundary. code....
I have Windows 7 on my machine right now but want to dual boot with either Ubuntu or another Win OS.....is there a way to dual boot with ubuntu and keep my windows boot loader or do I need to have grub?
I installed Ubuntu 10.10 64 on a Compaq CQ60 laptop on a 60 gig partition with a 3 gig swap partition. I'm running windows 7 64bit ultimate on the main partition. I installed off a live disc and Ubuntu works and runs great(except for wifi >.<).
My problem is ever since I installed Ubuntu Windows wont load every time. About half the time I select Windows 7 in the boot loader and it pulls up the windows screen with the stupid little flag, and then resets itself.
There where no problems with Windows 7 prior to the install. I've read that if you didn't reset your computer after shrinking your drive in windows it will cause problems later. But I did that so I cant think of any other explanation for why it would continually crash. Has anybody else had this issue, is this something that might be repaired by removing Ubuntu and the partition and reinstalling it?
I installed Ubuntu 11.04 64-Bit via Wubi but it seems that when I turn on my machine I first get the Windows Boot Loader, when I select Ubuntu from the list it then goes into GRUB with the option to select Ubuntu or Windows. Is there any way to change this so only GRUB is used?
