Ubuntu Installation :: Boot Loader Corrupting Windows MBR
Oct 23, 2010
I installed Ubuntu 10.10 64 on a Compaq CQ60 laptop on a 60 gig partition with a 3 gig swap partition. I'm running windows 7 64bit ultimate on the main partition. I installed off a live disc and Ubuntu works and runs great(except for wifi >.<).
My problem is ever since I installed Ubuntu Windows wont load every time. About half the time I select Windows 7 in the boot loader and it pulls up the windows screen with the stupid little flag, and then resets itself.
There where no problems with Windows 7 prior to the install. I've read that if you didn't reset your computer after shrinking your drive in windows it will cause problems later. But I did that so I cant think of any other explanation for why it would continually crash. Has anybody else had this issue, is this something that might be repaired by removing Ubuntu and the partition and reinstalling it?
View 4 Replies
ADVERTISEMENT
Jun 14, 2010
I installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
View 1 Replies
View Related
Nov 8, 2010
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
View 8 Replies
View Related
Mar 23, 2010
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies
View Related
Jul 28, 2010
I have 2 HDDs:
HDD 1 (sda) with Windows XP installed on sda1 and four more partions.
HDD 2 (sdb) with three NTFS-Partitions (sdb1, 5 and 6) and Ubuntu 10.04 (sdb7) + Swap-Partition (sdb8).
I would like to boot Ubuntu using the Windows XP boot loader, i.e., having an entry there to choose Ubuntu and start my installation of Ubuntu 10.04. I have installed Ubuntu 10.04 on sdb7 and told the installer to install the grub2 boot loader to /dev/sdb (should it have been /dev/sdb7?). When using the boot selection option of my bios and choosing the second HDD Ubuntu starts without problems.
I used dd if=/dev/sdb of=bootsect.lnx bs=512 count=1 to copy the mbr of my second HDD and copied the file bootsect.lnx to my c: drive. Then added C:ootsect.lnk = "Ubuntu Linux" to my Windows boot.ini. When rebooting my computer I get the option "Ubuntu Linux" in the XP boot loader. Choosing it I come to a black screen with a blinking white cursor. All I want to do is not use Grub 2 as my primary boot loader but instead leave my WinXP installation untouched and start Ubuntu from within WinXP boot loader. This has been working just fine with my old Ubuntu installation.
View 9 Replies
View Related
Mar 21, 2010
I have Windows 7 on my machine right now but want to dual boot with either Ubuntu or another Win OS.....is there a way to dual boot with ubuntu and keep my windows boot loader or do I need to have grub?
View 5 Replies
View Related
Jun 14, 2011
I installed Ubuntu 11.04 64-Bit via Wubi but it seems that when I turn on my machine I first get the Windows Boot Loader, when I select Ubuntu from the list it then goes into GRUB with the option to select Ubuntu or Windows. Is there any way to change this so only GRUB is used?
View 3 Replies
View Related
Aug 20, 2010
[URL](where loading into Windows corrupts the MBR). None of the solutions in the bug thread work for me, however--I'm on a Dell system (so it's not HP tools) and I'm not running PC Angel or any similar service (I checked). I assume it is related to the Dell recovery partition, though my old laptop from Dell didn't have this problem even though it also had a recovery partition.
However, before I had partitioned and set up Ubuntu on my new laptop, I installed Wubi (for transferring over the files from my old laptop because I didn't have time to do a full install and deal with problems like this one). Wubi worked fine using the Windows Boot Loader. I understand that WBL isn't capable of loading Linux on its own, which is why I was wondering if it was possible to have GRUB installed on a separate boot partition (not the MBR) and loaded from Windows Boot Loader. All of the information I could find on it didn't work with Windows 7--but again, I know Wubi was capable of doing it. how to set this configuration up?
View 2 Replies
View Related
Oct 18, 2010
I am user of ubuntu 10.10 beta version. I installed windows 7 on ubuntu but after that ubuntu doesnt boot up! Somebody please help me.I have ubuntu 10.10 live cd for 32 bit desktop edition.I want to rescue this problem.
View 2 Replies
View Related
Mar 17, 2011
I tried to install linux on hard disk and it installed without any problem. However, when i boot i directly get the windows boot loader screen and no grub screen. I reinstalled linux. I tried to fix grub, but still no grub screen.
View 4 Replies
View Related
Jun 8, 2011
I installed Ubuntu 11.04 on a separate partition, with Grub being in it own partition. When I start the PC only windows Xp is available. So how do I get grub or Ubuntu load with windows xp boot loader? I tried with Live cd, the sudo grub but then it says command not found. I think its because Ubuntu 11.04 uses grub 2.
View 1 Replies
View Related
Aug 31, 2010
I have Windows 7 and Ubuntu 10.04 dual-booted on my machine. grub was aautomaticlu installed as the primary loader. Soon i want to nuke my ubuntu partition but i know that will delete grub. Can i remove grub or at least make Windows boot loader default.
View 2 Replies
View Related
Jan 18, 2011
I am a new Ubuntu user, and I am attempting to set Windows 7 64 bit as my default OS in the boot loader instead of Ubuntu 10.10. I have entered the command gksudo gedit /boot/grub/menu.lst into terminal, and the menu.lst file does open. However, this file appears to be completely blank, which does not seem to make sense and is preventing me from changing the boot order.
View 4 Replies
View Related
Aug 16, 2009
install fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"
View 3 Replies
View Related
Apr 26, 2011
One thing I notice and hope someone here can steer me in the right direction. When I start up my computer I have the list of options to choose from, if I choose to boot into Win 7 I am the presented again with another boot menu from windows. I would like to remove the Windows boot loader.
View 4 Replies
View Related
Jan 14, 2010
i've a little problem with the grub loader. I've two OS in my laptot: Ubuntu 9.10 Karmic Koala 64bit and Windows 7 64bit. But i can't boot Windows 7 from the grub loader. The grub still load the /dev/sda1 partition that is the recovery partition of the laptot, while windows 7 is in the partition /dev/sda6. I tried to modify the path in the grub.cfg, but still load the wrong partition, how i can do?
View 2 Replies
View Related
Jul 18, 2011
I had opensuse/winxp running.
First windows xp wouldn't boot - then opensuse **** out and I had nothing but a black screen. I spent about two days trying to figure out what in god's name happened. I finally got a copy of winxp recovery disk and it couldn't find the partition that windows was on. That gave me some idea of what was going on. So I tried to fix the matter from partitionmagic. I reinstalled grub making sure that everything was associated properly. I still couldn't get either opensuse or windows to boot after many many different trial and error attempts.
After deciding there was no help for it. I decided to slave my hard drive and wipe to start over. So I booted partition magic from USB and deleted my opensuse partition and -what do you know - windows booted right up. Aside from feeling windows xp's smug grin as the logo appeared - i am perplexed as to how this happened. My guess is that MBR tried to overwrite grub. But I think that the loader was confused and trying to boot from the wrong partition.
I want to reinstall opensuse again. However I want to make sure that this doesn't happen. I need my xp partition for examsoft because wine doesn't seem to work for it and I can't vbox it. So is there some way to make sure that when I do install from DVD on my USB that:
1) repositories are correct
2) MBR doesn't overwrite grub (should I install Grub2 or LILO?)
View 4 Replies
View Related
Aug 28, 2010
Can I separately install a third party boot loader which can boot both Windows and Linux (Ubuntu) . I want to use a boot loader other than the boot loaders which come with these operating systems. I am trying this out of curiosity.
View 4 Replies
View Related
Jun 18, 2010
I have two hard drives, one (hard drive C) is 250GB and is the first hard disk. The second (hard drive Z) is 1000 GB and is the second hard disk in order. There used to be windows XP on C and Windows 7 on Z.
Because I installed 7 to Z from XP which is on C, it put the Windows Boot Loader on hard disk C. I didn't know this until now.
When I installed Fedora, I gave it all of C to install on. That messed up something because the Windows Boot Loader was on that drive, so grub didn't list it in the OS's to load. I had to add it manually, and got it working correctly so it had an entry for the partition that Windows 7 was on. This didn't work however, because Windows 7 on drive Z didn't have it's NTLDR on that drive, so now I have a 7 installation without an NTLDR on Z and a Fedora install on C. I am sure grub is working properly because when I change the load order of the hard drives to load Z first, it gives the same error:
NTLDR is missing
Press Ctrl + Alt + Delete to restart
or something along those lines.
Is there a way to get Z to have an NTLDR again and be able too boot Windows 7? I really hope I didn't mess up my entire 7 installation because of this.
View 9 Replies
View Related
Jan 4, 2010
I installed Ubuntu using Wubi, and the boot loader does not detect my keyboard. Does the windows boot loader only support PS2 keyboards? Would there be a workaround... like install DOS drivers for it? I have a logitech s520 keyboard.
When in Windows, I can select what OS to use, but is there a way I can select which OS to use while booted into Ubuntu? Is there a program that will let me modify the windows boot loader from within Ubuntu?
View 2 Replies
View Related
Feb 5, 2010
I recently installed ubuntu 9.10 32 bit using live cd onto a recently new Dell machine with windows7.
Everything was fine for a couple of weeks, but last night I got the error code...
Looking into the forums, I see that maybe I need to re-install grub 2. When I started probing using fdisk, I saw that the boot partition was my windows partition. So, I thought I would ask to find out if this looks right before I start making things worse code...
View 4 Replies
View Related
Oct 17, 2010
Im dual booting vista and ubuntu 10.10 when i start up i get the option to boot linux OR i can boot window recovery (loader) which works or i can choose windows xp which doesnt even work and im not sure why its there since i dont have xo installed and i never have on this pc. it doesnt say anything about vista anywhere.
My question is...is this a problem? it seems to work fine but i dont want to have problems later on.
View 4 Replies
View Related
Aug 10, 2009
I just installed Fedora 11 (I installed over the Fedora 10 installation I had already installed)..
-Before I would have Grub give the choice of Fedora 10 or Windows (Where Windows would load the Win Boot loader for my options of Windows 7 and Windows Vista)
-NOW: I have the same options.. But when i select Windows (It loads the Recovery partition) instead of the Windows Boot Loader...
Here is my fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 1 192 1536000 27 Unknown
Partition 1 does not end on cylinder boundary.
/dev/sda2 192 5414 41943040 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
code....
View 3 Replies
View Related
Dec 9, 2008
I have a PC with 2 Hard drives one of which has Windows XP Pro installed. I installed Red Hat Linux 7.2 on the other drive choosing LILO as the boot loader. When I reboot LILO only displays Red Hat 7.2 When I boot Red Hat and go into KDE boot settings I can see that hda has Windows NT. hdb has Red Hat 7.2. I then tried to make the Windows NT partition the default entry. When I try to confirm this an error displays warning me of danger if I proceed. Is there any way to make LILO recognize Windows (preferably without having to reinstall Red Hat), perhaps by installing another bootloader application!
View 2 Replies
View Related
Apr 29, 2010
I'm running SuSE 11.2, dual booted with Windows 7. SuSE installed fine, but when I rebooted, it went straight to windows and didn't give me the option of booting into SuSE. I reinstalled SuSE and went into the boot settings in Yast. When I rebooted, neither Windows nor SuSe would boot. I ran a system repair from the SuSE disk, at the boot loader settings, it displays the SuSE Linux partition and the Failsafe Linux recovery partition. I did not format any drives in the system repair. How do I add the Windows partition to the boot loader settings?
View 1 Replies
View Related
Oct 23, 2010
I have triple booted Windows XP (195 GB)partition 0? the second partition is Windows 7 (195 GB)And the rest of a 1TB hard drive went to Open Suse 11.3. if it makes any difference I used g parted to create the three partitions and made them all primary. My problem is I want to change the way they all get along. When I boot up, I get the options;
Desktop -- openSUSE 11.3-2.6.34-12
Failsafe -- openSUSE 11.3-2.6.34-12
windows 1
windows 2
which is fine, but clicking on windows 1 takes me to the windows boot loader with the options of windows 7, or previous version of windows. clicking on windows 2 brings up a screen telling me " rootnoverify (hd0,1) chainloader +1 BOOTMGR is missing press ctrl+alt+del to restart" I would like the end result to be windows 1=XP,windows 2=7, then I can rename them accordingly. one more thing, when I installed openSUSE, I let it automatically configure the hard drive and create the necessary partitions(it deleted partition 3 first). i remember it saying somewhere that the boot manager was past the 125 GB limit, and might not boot.
View 8 Replies
View Related
May 8, 2010
I have a WD 80GB ATAPI hard disk for my operatings systems.
The partition table is :
First i installed Windows and then Slackware.
The problem is that in MBR , looks that lilo never installed and when my pc starts, the lilo menu never load it . Boots directly to windows.
What i should do, in order to have the lilo menu in startup?
View 13 Replies
View Related
Feb 2, 2011
After installing recommended updates for Ubuntu, Ubuntu would no longer boot from Windows Boot Loader. It looks like an error about some missing NTFS4 files briefly flashes on the screen.
View 2 Replies
View Related
Aug 30, 2011
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
View 2 Replies
View Related
Nov 19, 2010
had a dual boot system with openSuse 11.1 and Windows XP working OK - Linux boot loader was where OS selection was made (openSuse was installed after Windows) Last week I had to reinstall Windows and this removed the Linux loader from MBR and Windows booted automatically. I wanted the Linux boot loader back,checked the threads about boot loader restoration and did the following:
- downloaded Knoppix 6.2.1 ISO and burned to CD
- booted with CD
- opened terminal with root privileges and typed:
grub (ENTER)
grub> find /boot/grub/stage1 (ENTER)
> (hd0,2)
grub> root (hd0,2) (ENTER)
>Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0) (ENTER)
setup was successful (no error messages)
Now when booting, i have an error that root (0,3) can not be mounted and "Press any key to continue"??? When hitting any key I see that there is GRUB there with all entries as in original state (Suse 11.1 and Windows) but only Windows can be booted. Then I downloaded live eval of openSuse 11.1 and did the same (booted from CD and run same commands from terminal as root) - again no errors but still "root (0,3)" can not be mounted..
View 9 Replies
View Related
