I'm trying to write a bash script that gets the list of files in a directory and puts them into a variable, then checks each entry and outputs them as follows:
item1 is a FILE
item2 is a DIR
item3 is a DIR
etc etc.
I am able to get the list of files into a variable, but unsure how to get the output I want.
I'm trying to write a bash script which will find files then move them to a specific directory.
So far I have:
Code:
#!/bin/bash
#script to find and move files
src_dir="/path/to/source/directory"
des_dir_mov="/path/to/destination/directory/for/movies"
des_dir_img="/path/to/destination/directory/for/images"
find $src_dir -iname '*.avi' -type f -exec mv '{}' $des_dir_mov ';'
I'd like to have all the possible movie file types then the image file types checked in a loop.
Every time I try to include an array in this script it breaks
I have a file with joker character patterns:
./include/*
./src/*
etc.
From the current directory I would like to recursively get the list of files that do not match these patterns.
When I try to list files in directory. I am getting i/o error
#ls -l /test
I am getting i/o error. Why I am getting this error and what are these i/o errors.
I have managed to write a bash script that moves files to the recylce bin instead of being deleted. Then (with a bit of assistance) wrote another bash script that deletes the files from the recycle bin. Now I need to write one that will restore the files preferably to their original location? I am very new to linux and stuggling with where to even begin...any ideas? There seems to be some advice about creating a cloning tree, but I've never heard of them?
View 8 Replies View RelatedWhen I run "ls -al somedir*" (I use the "ll" shortcut, actually), Linux not only list files that match, but also the contents of directories whose name also happens to match.Is there a way to limit "ls" so that it will only show names (files and directories) and ignore the contents of the directories?
View 2 Replies View RelatedI'm using OpenSSH 5.5p1 on Fedora 15. I'm trying to get a chrootDirectory to work. Specifically trying to figure out why I can't write files to a sub-directory of the chroot directory. I created a user test_user and created a group called sftp. I added test_user to the sftp group. I edited /etc/ssh/sshd_config as follows:
Code:
Subsystem sftp internal-sftp
Match group sftp
ChrootDirectory /home/sftp_users/%u
X11Forwarding no
[code]....
I'm pretty new to bash scripting, but I really want to wrap my head around it.What I'm trying to do is: From directory "A": Go in to all subdirectories and rename all files within icrementally according to the directory name. SO:
|-- Varian
| |-- FB1-page132.pdf.png
| |-- FB1-page133.pdf.png
[code]...
I am trying to create a function within my .bashrc that will process all of the files that do not end with .sh within a directory and execute them.The following is what I have so far. I am missing a way of excluding files that end with .sh though.
function startall {
for file in /etc/init.d/*.; do
"${file}" start
[code]...
In my tmp directory some logs are creating continue (with name logs.txt1, logs.txt2 up to 245). Some times these logs are creating continue within 1 or 3 second gap, now I want to write a bash script that continue monitor the tmp directory and if any time logs create simultaneously within 1 or 3 section gap it will alert me..( generally logs are create with the gap of 5 or 10 minutes duration or some time after one hours )
View 1 Replies View RelatedHow can I convert a file with a lot hex numbers into the decimal?
Example: file1
0x59999
0x5acdc
0xffeff
I want to start $ cat file1 | util | cat >file2 and get file2 with smth like
[Code]...
I am an uploader to a various hosts, so this tiny script me a lot. I make a rar archive and split files with 100mb. I could get 3-4 or even 76 parts of rar files and it would take me some time to paste all these urls to remote upload function of filehosting sites. For example:
Code:
server:/home/cober/downloads/teevee# ls -al
total 358784
drwxrwxrwx 2 root root 4096 Dec 8 19:38 .
[code]....
I create a bash script that writes another bash file. But in the generated bash file I want to write a bash command in the file and not executing it.Here's my bash file:
Code:
#!/bin/bash
cat > ~/generateGridmix2data.sh << END
[code]...
I have uShare 1.1a setup to talk to my XBox 360. If I share a directory that has no subdirectories, the video files display on the XBox. However, most of my files are in sub-directories on a different partition - I don't really want to copy them to the share, but uShare doesn't seem to recognise any sub-directories or files contained therein.
I have tried setting up symbolic soft links directly to the video files (although this is a pain, it is better than moving the files)...
Code:
ln -s /home/jonftp/TV-Shows/Buffy/Season-1/Buffy-101.avi /home/share/Buffy-101.avi
...but these don't show up on the XBox either.
How can I get uShare to "drill down" the directory structure to list the files or how can I get uShare to follow symbolic links?
I have a folder of 2 many files that the old ls just hangs.
I am trying to write some log files such as;
I don't mind doing one at a time, but I am just playing and even getting the listing I am not getting the date stamp, I have the following;
That does create the file, but all the files look like this;
So basically it's just sticking that ls inside the log file and not actually running the ls, so how can I use the above type to get files just created per year?
I'm writing a bash script to copy a list of files and do some stuff to them. Basically, I have the code written that does what it needs to do, but I can't quite understand why it works. I was hoping someone could clear up my understanding a bit.
Code:
The first line generates a list of files. I wrap each line in quotes because they usually have spaces in the directory names.
The second line changes IFS, and I understand what IFS itself does. What I don't quite get is what the separator becomes with that echo statement. If I'm reading that correctly, the backspace will remove the newline and essentially the result is nothing? I found this solution on a web page somewhere, but it was years old and there was no real explanation.
need a command or script to list all files recursive without directories one line per file, no extra lines like ls -AR1 should print file size and name eg.:
12 file.ext
25684 file2.ext
589 file3.ext
...
How can I write a script that will go through the files in a directory and print on the screen the name of the files stating if it is a file or directory. The directory is already provided by the user.
View 12 Replies View RelatedHow to build a list of files under a directory that may have any permissible characters in the name, that is anything except NUL? The only possible (?) bash data structure to contain a list of such names is an array because NUL cannot be used as a list item separator so no X-separated list can safely be used; there is no "X" that might not be part of a file name. OK -- but how to populate such an array? Here's what I've tried.
Code:
#!/bin/bash
# Set up test files
dir=$(mktemp -d "/tmp/${0##*/}.XXXXXX")
touch $dir/foo $dir/bar
[code].....
I have a bunch of files that contain a date, then data. When I use join, I get exactly the output I need. But manually joining the first with the second, then that output with the third and so on would take days. I have thousands of files. Can any of you folks help me write a script that would do this?To put it another way, for clarity's sake, here is what I am currently doing
If I were to repeat that 3000 times the final output would be what I need. I know a simple script would do this for me, but I can't figure out how to write it.
How can we list only files present in a directory in Redhat linux.The LS commands lists both the files and the directories. What command can be used for the above purpose.
View 1 Replies View RelatedAKA "zipping on the fly .. the slow-as-molasses way." The list includes full pathnames to each file, and they're all in subfolders of the same parent folder (which, unfortunately, is not the root folder of the drive or system on which the files reside). A cleaned-up and radio-ready portion of the list looks like
Quote:
.../taiga/ahqr-va-choyvp/bv0884-073.jpg
.../taiga/ahqr-va-choyvp/bv2635-073.jpg
.../taiga/ahqr-va-choyvp/bv3067-175.jpg
[code]....
What I'd like to be able to do is zip all the files in the list into a single archive, to avoid the step of having to copy them to the same location (presumably another folder on the HD) and then zip that folder. I'm more inclined to make provisions about extracting to a single folder at some other time. Is this possible in BASH, or would I have to consider a faster, more robust scripting language such as python or perl?
I want to write a script that will detect all the unwanted files in a particular directory and delete them in one fly..
View 11 Replies View RelatedHow to list only hidden files in current directory ?
View 2 Replies View RelatedI want to write a shell script which will simultaneously collect OS user information and write in an individual text files.Can anyone tell me the syntax of the script.N.B. The user name will be mentioned in an array within the shell script.
View 8 Replies View RelatedI am trying to write a simple script to list all the files in a directory. The script I wrote was as below where the pdb_files is a directory and all the files which I want to list are in that folder.
Code:
files=`ls -F pdb_files/*THERMO*`
for inFiles in $files
do
echo $inFiles
[Code]....
I have about 50 files that the script will operate on, they are all located in the same directory.I need a bash script that will operate on all files in a directory. The script needs to add two lines to the beginning of each file based on the file name, and one line to the end of the file.A file named myfile.h should add these two lines to beginning of the file:
Code:
#ifndef MYFILE_H
#define MYFILE_H
[code]....
i was wondering if there's a bash script to check the amount of files in a directory with an IF statement..
View 8 Replies View RelatedI am working for a community where several people are engaged for 4 different development projects. we are planning to have a samba server to store our data.Now the problem is that I have created a share in which @groupa, @groupb and @groupc are allowed to read and write. But three of the members of @groupb are only allowed to for read permission only.
View 1 Replies View RelatedI have very little linux experience. And need some help with a bash script. I need to a script I can set cron to run to sort files out of a holding folder into final folders. It doesn't necessarily have to be bash, but I think it would be sufficient for this. File names are formatted as such when created: Dest-Date-Time-CID-Destination# I want the files to be moved from a all in one holding folder to a folder structure like this.
.../storage/year/month/day/Destination#/VarX(type)/hour/CID/'File'
I would need an if/else if/else statement to say if Dest = A set VarX = B If for example the file name was
infinity-20100927-17:00-1112223333-4445556666.wav
I would like the above file to end up moved from
.../holding
to
.../storage/2010/09/27/4445556666/Inbound/17/1112223333/infinity-20100927-17:00-1112223333-4445556666.wav
So the script will need to make directories based on information in the file name which is delimited by single dashes. Then move files from the holding folder to the newly created "sorted" folders.
