General :: Updating The Url List Apt-get Uses In Debian

Sep 12, 2010

When I do 'apt-get update' on my VPS I get a lot of error messages:

[Code]....

update this list to make all the urls work.

View 3 Replies


ADVERTISEMENT

Debian Configuration :: Getting Errors While Updating Sources.list

Jan 27, 2011

I am trying to add usermin source from here: [URL]

If you like to install and update Usermin via APT, edit the /etc/apt/sources.list file on your system and add the line : deb [URL]

View 5 Replies View Related

Debian Multimedia :: Make A Dialog With Zenity Which Would Show An Updating List?

Jan 4, 2011

Is there a way to make a dialog with zenity which would show an updating list? Zenity does it with progress, but I didn't figure out if it's possible to do it with the list. I.e. for example, I want to monitor something, and update the dialog with new list periodically. Is it even possible? zenity can wait for data from stdin, but it just adds stuff to the list. May be there are some control sequences which clear the list in the dialog?

For example:

{ echo "Foo"; sleep 2; echo "Bar"; } | zenity --list --title='Dynamic list?' --text='Some data' --column='values'

How can I instead of adding Bar, replace the Foo with it?

View 2 Replies View Related

Ubuntu Installation :: Getting Error When Updating Package List / Fix It?

Jun 14, 2010

Following are the error details..
W: GPG error: http://ppa.launchpad.net jaunty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY C174A7B143CBFCC0
W: GPG error: http://ppa.launchpad.net jaunty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY CE90D8983E731F79

View 3 Replies View Related

Ubuntu Installation :: Ignored Repositories When Updating Package List?

Dec 3, 2010

I'm experiencing a strange issue with my Ubuntu 10.10 since a few days:when trying to update the packages list, a lot of repositories are ignored.Here is the output of

Code:
sudo apt-get update | grep -i ign
.
Quote:
Ign http://extras.ubuntu.com/ubuntu/ maverick/main Translation-en
Ign http://extras.ubuntu.com/ubuntu/ maverick/main Translation-en_GB[code]....

How come all these repositories cannot be hit?is there any way to make the update hit there repositories? And if they're useless, no longer supported, how can I remove them so to have a tidy repositories list?

View 3 Replies View Related

Ubuntu :: Stopp GRUB2 From Updating List On Update?

Mar 17, 2011

Is there a way to stop GRUB2 from updating grub.cfg with new entries after an update? It shits me because it goes and writes over all my custom modifications of current entries.. e.g:

"Windows 7 Home Premium" (which I made), gets changed back to:

"Windows 7 (loader) (/dev/sda2)"

View 2 Replies View Related

Ubuntu Installation :: 11.04 Updating Source List Error

May 10, 2011

i have using ubuntu 10.10 from past 3 months and about a week before upgraded to 11.04. The upgrade was a successful one and everything was back to normal, was enjoying unity. upgrading disabled most of the ppa's in the source list and later i enabled them and still everything was okay. yesterday suddenly when i clicked on the ubuntu software center it was just showing as if it was still processing the source list but after sometime it started giving me the below error: "E:Type 'rc' is not known on line 3 in source list /etc/apt/sources.list.d/geod-ppa-geod-natty.list"

View 7 Replies View Related

General :: Invisible Mouse Cursor After Updating Debian Squeeze?

Mar 26, 2011

I have just updated Debian Squeeze and my mouse cursor is invisible. However, it still functions... I can right click and get a menu, clock on things and get the normal functions.

I have filed a bug report and found one other bug report on this but haven't found a fix or any other info.

View 2 Replies View Related

Ubuntu Installation :: 10.10 Server Install Hangs "Updating List Of Available Packages" / Fix It?

Feb 10, 2011

I'm not sure what more to say than what is in the title. The install stops with the message of "Updating the list of available packages".

I can't copy and paste from the log screen, but. code...

View 9 Replies View Related

General :: List Installed Packages In Debian From A File?

Jun 25, 2010

I have a system that will not boot as /usr has been destroyed and I would like to get a list of installed packages before re-installing. I know that it's possible to get this using dpkg or apt, but I cannot run those.

Where in the filesystem is this information stored and what's the best way to get a list of installed apps from the files?

View 2 Replies View Related

General :: Sources.list For Debian Lenny Stable?

Feb 11, 2010

I am looking for the best sources.list there is for Debian/Lenny Stable,I got the following from the website of sources.list generator, but I am not convince because for the last 6 days I did not got any update to do, my system been for 6 days straight up to date so, I am not convince at all because it is odd, here is my sources.list:

Code:

#############################################################
################### OFFICIAL DEBIAN REPOS ###################
#############################################################
###### Debian Main Repos

[code]...

PD: I got Germany Debian servers because they are pretty fast nothing more and also I am running on my Desktop Xfce4 that I loved, but, I would like to know if there is any repository for updates on this wonderfull Desktop Enviroment.

View 14 Replies View Related

General :: Update Debian Squeeze From Lenny's Source.list?

Mar 21, 2011

What happens if I update Debian Squeeze from Lenny's source.list?A step by step manual is written on Lenny, and if I change lenny to squeeze things seem to not work.When I update the squeeze from the original source.list and then change to the source.list that manual uses things are working.But if I were to start squeeze with lenny's source.list I am getting error while trying to do this:

apt-get install wget mc zip unzip bzip2 ntp ntpdate lsb-release.

View 6 Replies View Related

General :: Bash - Shell Utils: Convert A List Of Hex To List Of Decimals?

Dec 27, 2010

How can I convert a file with a lot hex numbers into the decimal?

Example: file1
0x59999
0x5acdc
0xffeff

I want to start $ cat file1 | util | cat >file2 and get file2 with smth like

[Code]...

View 3 Replies View Related

General :: View List Of Updated Packages After Apt-upgrade On Debian-based Systems?

May 15, 2010

I just did an update on my Debian system and it was very long. I'd like to know now, after the upgrades have already been applied, which packages were upgraded and which were not.

View 2 Replies View Related

Debian :: Debian Testing: Warning Messages While Updating?

Aug 12, 2011

I'm running Debian Testing and since some time ago I'm getting the following messages:Any ideas how to solve this warnings?

(gtk-update-icon-cache:9204): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/x86_64-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory
Processing triggers for gconf2 ...

[code]....

View 5 Replies View Related

General :: List The 'chkconfig --list' In Alphabetical Order?

Jan 7, 2010

list the 'chkconfig --list' in alphabetical order

View 3 Replies View Related

General :: Command To List The List Of Folders / Within The Folder

Jan 28, 2010

one command to list the list of folders/ within the folder.

View 4 Replies View Related

Debian :: Updating A Pc With Debian Without Internet Connection?

May 6, 2010

I have a pc with debian lenny, this machine doesn't have internet connection, when I need a new package I installed it with dpkg, updating phyton I got some broken dependences and some services doesn't work properly. I have another pc with debian lenny that is updated, my question is: what is the process to extract the packages downloaded in the pc-B, and create a mobile repository?

View 1 Replies View Related

Debian :: Wine 1.1.42 Not Updating?

Nov 21, 2010

I first went to edit the sources.list to add the Wine repository (or something, I'm not sure).

I then got this output trying to add the gpg key.

debian:/home/debian# wget -O - http://www.lamaresh.net/apt/key.gpg | apt-key add
gpg: can't open `': No such file or directory
--2010-11-20 21:54:52--  http://www.lamaresh.net/apt/key.gpg
Resolving www.lamaresh.net... 62.149.140.208

[Code].....

At first it worked, but now it's giving me this and the fact that it won't update isn't doing me any good.

View 8 Replies View Related

Debian :: Precautions When Updating Unstable?

May 5, 2010

What is the recommended way to do updates when running sid (especially those involving updates of xorg or desktop environments as they should not be running at that time)? I imagine this would be safe:

1. # apt-get update
2. # apt-get dist-upgrade -d
3. Switch to a text mode terminal (say, tty1).
4. # /etc/init.d/kdm stop
5. # apt-get dist-upgrade

Or simply using init 1.

View 14 Replies View Related

Debian Configuration :: Kernel Not Updating To 3.16

Jul 26, 2015

Upgraded Wheezy to Jessie, by changing my apt sources to point at stable instead of wheezy. Ran upgrade, and dist-upgrade, all fine etc.

Then tried to update the kernel by installing linux-image-amd64 package .. seemed to work fine, but after a reboot my kernel version still says 3.10.23

What have I missed?

Code: Select allroot@hostname:~# apt-cache search linux-image
linux-headers-3.16.0-4-amd64 - Header files for Linux 3.16.0-4-amd64
linux-image-3.16.0-4-amd64 - Linux 3.16 for 64-bit PCs
linux-image-3.16.0-4-amd64-dbg - Debugging symbols for Linux 3.16.0-4-amd64
linux-image-amd64 - Linux for 64-bit PCs (meta-package)

[Code] .....

View 6 Replies View Related

Debian :: Updating Libc6 W/o Upgrading?

May 17, 2010

I run Etch. Yes, it's oldstable, but Lenny and Squeeze annoy the heck out of me. However, I'm trying to install the latest version (5.1) of Google Earth, but it requires >=glibc-2.4. Etch only offers 2.3.something. The earlier version of GE I have (4.3) does work, but is apparently no longer supported by Google as it fails to connect every time I fire it up. I found Lenny does have the required libc6 version. Can I update the libc6 packages by installing them directly (separately downloaded packages) or do I get the dependency hell that I want to avoid?

View 4 Replies View Related

Ubuntu :: Updating Withough Updating Kernel ?

Apr 21, 2011

I have a 3dsp pci wifi card, and the last kernel it supports is Ubuntu 10.04 2.6.32-(21-24) I want to update but dont want to accidentally update the kernal.

View 3 Replies View Related

General :: Evolution Task List Reminder (sync With Phone And Online Task List)

May 19, 2011

I have my task list in evolution (mainly so it can sync with my phone and online task list) but I always forget to look at the task list. Is there an application or plugin which periodically displays the contents of the tasklist or even better, it briefly displays the most urgent/important tasks when I login? Or anything else which automatically displays the most important tasks. Currently I have to open the task list and look at them (which I usually forget). I do not mean some kind of alarm when the task is due but more a daily reminder of what to do.

View 3 Replies View Related

Debian :: Updating Index In Apt-show-versions

Jul 8, 2011

When we use either apt-get or/and aptitude to update the index. Does anybody know where this index is kept ?The thing is when I remove an entry or two from /etc/apt/sources.list and run $ sudo aptitude update and then run apt-show-versions -a it still shows me packages whose paths I have deleted.

View 3 Replies View Related

Debian Installation :: Updating Three Machines With One Download?

Aug 21, 2011

I have now got three machines with Debian on in my home. I use Mobile Broadband with a very modest monthly limit and remember somehow using Synaptic to gather either Updates or packages to download on one machine where there was another type of internet and could then move the packages back to my computer. Can anyone here remind me of what I would have done there or suggest a means of getting these three updated without blowing my limit. I'd either use a relative's broadband and my netbook, or do the Updates once at home and move the packages to the other two machines.

I'm using Debian 6.01, Gnome edition, 64 bit, on an Atom N450 netbook, a 3ghz dual core AMD pc and a a 2 ghz single core AMD pc, whatever of this is relevant. They have slightly different programs installed but are at the same stage of not being updated yet, with 252mb of them to add.

View 5 Replies View Related

Debian Installation :: Updating While Moving To New Machine?

Sep 9, 2011

My Debian Lenny box has two hard drives: a smaller one, upon which I installed the system and a 500GB drive which, during installation, I assigned for mounting as the "/home" directory. A few days ago, the smaller (system) hard drive crashed. Although fsck was able to make the drive mountable again, many system files (esp. things like inittab) were lost.

Since the machine, itself, had actually been pretty old when I first installed Debian (Etch, originally), I am going to be replacing it with a new system and I have a few questions about getting this all done.

First of all, the old computer was a Pentium 4 and the new one is a Dual-core, 64-bit Pentium (E6600) with 4GB RAM and a 500GB SATA drive. I'd like to install 64-bit Debian Squeeze onto that drive and, since I've never used the 64-bit Debian before, would like to know if there are any pitfalls or caveats - especially any dire reasons I should stick with 32 bits, instead.

Next, I would like to keep the other 500GB (IDE) drive mounted on "/home" so that my things would be where they already were on the old system - especially files relating to Iceweasel and Icedove. Of course, there are no binaries on that drive, since I had all of that on the drive that crashed, but are there any other things I must take into consideration? Also, what would be the best way to make that drive "/home" during the new installation without wiping it out, but having it ready for when I create the users so I can point them to their appropriate directories?

Finally, since the old computer had been an Etch system that had been upgraded to Lenny and since I would be installing Squeeze (and, likely, the 64-bit Squeeze, at that) onto the new system, would there be any problems with the above scenario, considering the potential of older configuration files, etc. on the old "/home" drive?

My subject line says, "Updating while moving to new machine," but these really may not be "update" questions, per se. Then again, the presence of that old hard drive does introduce some update-like elements into the equation, and that is why I am asking these questions.

View 1 Replies View Related

Debian :: Can Force Overwrite When Updating / Upgrading

Aug 5, 2015

While updating and upgrading, I got this at the command prompt:

Code: Select all ==> Modified (by you or by a script) since installation.
 ==> Package distributor has shipped an updated version.
   What would you like to do about it ?  Your options are:
    Y or I  : install the package maintainer's version
    N or O  : keep your currently-installed version
      D     : show the differences between the versions
      Z     : start a shell to examine the situation

 The default action is to keep your current version.

View 3 Replies View Related

Debian :: Updating The Kernel Without An Internet Connection?

May 19, 2011

I recently installed Debian "Squeeze" onto a Thinkpad T420, alongside Windows 7. During the installation Debian was unable to detect my NIC (Intel 82579LM), but otherwise the installation completed normally. I've installed the required e1000e drivers, and added "alias eth0 e1000e" to the modules file. Using lspci I can see that the computer detects the card, but still fails to load the drivers for it.

I'm at a bit of a loss, as this is my first time using Linux. After a bit of searching it looks like the 2.6.38 kernel resolves the issue with this card, so I guess that's my next step.Unfortunately all the installation instructions I've found assume an internet connection.Is there a simple way to update the kernel without a connection, or -even better- an install disc with 2.6.38 so I can start from scratch?

View 3 Replies View Related

General :: Debian - Gnome: Wireless Connection List Missing Connection?

Nov 12, 2009

Each time I start up debian -lenny, the network-manager does not automatically connect me to my wireless network. The connection list shows a lot of networks available, but mine is always absent from the list. This means I each time have to go to "Connect to other Wireless Network" in and write in my network name (SSID) and password (PWA2 Personal). Then is connects nicely and everything works fine until next time I boot

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved