I'm not sure what more to say than what is in the title. The install stops with the message of "Updating the list of available packages".
I can't copy and paste from the log screen, but. code...
I'm trying to update Ubuntu 10.04 after a clean installation, it downloaded 245 files,and there is an error in the indexes of the 2 last packages:Failed to fetch [URL] difiere (bad size) Failed to fetch [URL] difiere (bad size) This happens even changing the repository to main server or another through "Software origins".Update-manager doesn't conclude the update because it can't download all the packages.
View 1 Replies View RelatedI'm using ubuntu 10.04 Is it possible to get a list of all packages installed after the initial installation?
View 4 Replies View RelatedFollowing are the error details..
W: GPG error: http://ppa.launchpad.net jaunty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY C174A7B143CBFCC0
W: GPG error: http://ppa.launchpad.net jaunty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY CE90D8983E731F79
I'm experiencing a strange issue with my Ubuntu 10.10 since a few days:when trying to update the packages list, a lot of repositories are ignored.Here is the output of
Code:
sudo apt-get update | grep -i ign
.
Quote:
Ign http://extras.ubuntu.com/ubuntu/ maverick/main Translation-en
Ign http://extras.ubuntu.com/ubuntu/ maverick/main Translation-en_GB[code]....
How come all these repositories cannot be hit?is there any way to make the update hit there repositories? And if they're useless, no longer supported, how can I remove them so to have a tidy repositories list?
i have using ubuntu 10.10 from past 3 months and about a week before upgraded to 11.04. The upgrade was a successful one and everything was back to normal, was enjoying unity. upgrading disabled most of the ppa's in the source list and later i enabled them and still everything was okay. yesterday suddenly when i clicked on the ubuntu software center it was just showing as if it was still processing the source list but after sometime it started giving me the below error: "E:Type 'rc' is not known on line 3 in source list /etc/apt/sources.list.d/geod-ppa-geod-natty.list"
View 7 Replies View RelatedSo i created a USB startup disk on my 32g flash. Worked fine until I went to update the packages on it. Now it wont boot up and it also fails when trying to install on another machine.
View 1 Replies View RelatedI recently had to rebuild my computer with a new HDD and decided to load the new Ubuntu 10.04 which seems to work great. I was in the middle of downloading packages from the Ubuntu Software Center when the computer decided to reboot in the middle of downloading 6 packages. I went to the Synaptic Package Manager and it said to run "sudo dpkg --configure -a Here is what I got when I did that. What do I do next to fix and continue downloading the corrupted packages?
[Code]....
When I try to update my packages, or install new packages, I get this error:"E: /var/cache/apt/archives/libglib2.0-0_2.26.1-0ubuntu1_amd64.deb: subprocess new post-removal script returned error exit status 1"I tried the "sudo apt-get install -f" but it didn't work.I'm running 10.10, on a Asus laptop
View 3 Replies View RelatedOk, so I just finished correcting my driver issue with my wireless card when I'm struck with another problem....after gaining access to the net and updating my packages, ubuntu fails to boot up. It freezes at the boot screen where it runs the 5 orange dots with the ubuntu logo.
View 1 Replies View RelatedKpackage manager is not updating. When I try to I get this error. I am un-able to install any packages.
View 8 Replies View RelatedI got a problem while updating KDE from 4.1.2 to 4.2. In our college we can't download more than 20MB officially. So I'm unable to get kdegames which is 32MB from Konsole so I downlaoded it using proxy and I copied it into the /var/cache/yum/updates/packages/ folder and now using this command (yum groupinstall 'KDE (K Desktop Environment)').
I tried to update to KDE 4.2 using Konsole but it is showing:
Error Downloading Packages:
6:kdegames-4.2.0-1.fc10.i386: failure: kdegames-4.2.0-1.fc10.i386.rpm from updates: [Errno 256] No more mirrors to try.
And even by double-clicking the KDEgames rpm file I'm unable to install it is saying GPG (I'm not sure GPG or not, start with G i think) Key missing so it is taking too much time and not doing anything.
I updated the package libcgic-devel to a newer release of the same version. The change in the distributed files includes renaming a file cgic.html to index.html. I have both files installed now and cgic.html is orphaned.
View 6 Replies View RelatedI'm trying to list installed packages on a remote server. I don't see a way to do this with either yum or rpm.In particular, I'd like to list installed packages on a remote server, and list only those packages installed from our own repo
View 5 Replies View Relatedi have a Centos 5.5 server that some staff have installed some extra packages on. I'm in the process of building a 5.6 server and want to include the packages / updates from the previous server. Can this be done easily? Was thinking of listing everything in a text file then using yum install to populate anything that the old server has that the new one doesnt?
View 3 Replies View RelatedHow can I list what i have installed for current packages, excluding what normally comes with a fresh install of 9.10?
View 8 Replies View RelatedI'm working on a script that keeps track of user explicitly installed packages (no deps, no default packages), where can I found a list of ubuntu natty preinstalled packages ? Is there some file in the filesystem or in installation disc ?
View 3 Replies View RelatedWhere might I find a list of all packages available for install on the Fedora 12 disks?
View 2 Replies View RelatedI wounder how I should do to find out what packages I have explicitly installed on the system, NOT including the dependencies. The purpose is to get a figure of what packages I need to install when I reinstall my system.In Gentoo one can look at the world-file (/var/lib/portage/world) which is a list of my explicitly installed packages, not including system packages (located in /var/lib/portage/system)
View 1 Replies View RelatedI'm reinstalling an ubuntu machine that does not boot anymore. I have a complete backup of all the files that were on the harddrive.
I would like to make a list of all the programs that were installed, so I can re-install them on the fresh install.
I've found the following procedure, but this method requires that the machine still boots. (and my machine does not boot anymore) code...
Is it possible to get a list of installed packages from the backup of an ubuntu machine?
PS, My appologies for my English, I'm dutch
I was following this thread: Upgrade kde4.6>
But just before I clicked accept after saying switch system packages to kde4 repo (the one in that thread) I noticed loads of the packages were older than those installed. In the list it has installed (available) and lots of them were all highlighted in red, and the installed version numbers were higher than the available, yet I'm running kde 4.6.0.
I want to install a list of packages in the file. i tried using yum install in a shell script, while read -r line do
echo "Package-->$line"
yum install $line
done < file1.txt
if i run this script:
[Code].....
I want to some how get a list of the packages I installed. I was hoping that I could just list all of the packages that were not installed automatically as a dependency. It turns out that there are 320 packages that match that description (I think). Is there a way to do what I want to do? Shouldn't all of these dependencies have been installed as a handful of meta-packages instead?
View 2 Replies View RelatedI've recently removed some packages and now have a problem with fonts. how to get list of removed packages (for example, last 10)?
P.S. I'am using yum-remove-with-leaves plugin.
what this means? installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... dpkg: parse error, in file '/var/lib/dpkg/status' near line 11756 package 'vinagre': `Depends' field, reference to `libgconf2-4': version contains ` ' I get it while trying to update my computer.
View 2 Replies View RelatedBooted my laptop up for the first time in a while and ran
Code:
sudo apt-get upgrade to get updates for my packages. After installing I needed a reboot since I was on kernel 2.6.35-28. Post-reboot, I get stuck on a black screen with random artifacts after the purple screen after Grub, regardless of kernel (back to 2.6.35-22 is the oldest I have) with exception to the recovery mode options. Pressing the power button will shutdown the system in what seems to be the usual manner. The screen changes to the purple with ubuntu in the middle and the dot loading bar and shuts down.
I booted into recovery mode and opted to repair packages and rebooted but to no avail. I can get into a terminal by editing the boot options in Grub swapping out " quiet splash vt.handoff=7 " with "--verbose". Currently have a terminal on kernel 2.6.38-10 Ubuntu 11.04 32-bit. Win 7 partition also boots fine.This feels like a driver issue, but I'm not sure. Boot log (/var/log/boot.log) looks fine except for these lines:
Code:
fsck: fsck.ntfs: not found
fsck: Error 2 while executing fsck.ntfs for /dev/sda2 /dev/sda3: clean, 262541/8560640 files, 2310841/36228480 blocks
init: ureadahead-other main process (723) terminated with status 4
The first 2 shouldn't be affecting my Ubuntu boot in this manner (other than failing to automatically mount my NTFS partition, which is a different problem), however the last one worries me. Doing some research on the termination status 4 of ureadahead-other I came across this page here, but am wary to just go around willy-nilly deleting things I don't know much about. It wouldn't be a great loss to simply blow the disk away and restart, but I'd rather salvage what's there if I can..
My problem is that I am unable to do a routine upgrade of packages. When I try to perform an upgrade, the following occurs:
Code:
$ sudo aptitude dist-upgrade
Reading package lists... Done
Building dependency tree
[code]....
If I try to install another package, I get the following message:
Code:
E: I wasn't able to locate file for the tzdata-java package. This might mean you need to manually fix this package.
E: I wasn't able to locate file for the tzdata-java package. This might mean you need to manually fix this package.
E: Internal error: couldn't generate list of packages to download
Whenever I do sudo apt-get or use the Ubuntu Software Center, I can't download anything because a message comes up saying "Action requires installation of untrusted packages: The action would require the installation of packages from not authenticated sources." I've been trying to download GIMP and Thunderbird, so... I dunno what the problem is.
View 8 Replies View RelatedWhen I tried to upgrade (update) current packages list in my synaptic I got error messages about unresolved gpg keys as following:
Code:
How I can get all missed keys for completing update process?
So I tried installing the nvidia drivers for my GeForce 330M using Jockey after I first installed 10.10, but it did not make it so my desktop was not bigger than my screen. So, I blacklisted nouveau by creating a text file which had in it:
blacklist nouveau
options nouveau modeset=0
Then I saved the file as disable-nouveau.conf, then chown(ed) it to be owned by root, and moved it to /etc/modprobe.d/
I then installed the driver for my nvidia card, and everything worked perfectly. But after installing the updates listed in the update manager, my computer won't even boot to the GUI desktop, it just hangs. I can still access the command line, but when press <ctrl-alt-F7>.
All I see is this:
fsck from util-linux-ng 2.17.2
//dev/sda1: clean 170760/29409280 files, 5091535/117623296 blocks
*Starting AppArmor profiles
Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
*Setting sensors limits
speech-dispatcher disabled; edit /etc/default/speech-dispatcher
*Starting the Windbind daemon winbind
And that's it. It just hangs there. Like I said, I can still access the command line with <ctrl-alt-F1>, but I have no idea how to get Gnome I guess to display?