Fedora :: Nessus Configuration - Daemon Login Failed

Mar 24, 2010

Fedora 12
Nessus: 2.2.11-5
Authent: using passwrd
Client: GTK version
User: added with no rules
nessus-mkcrt: has been ran
Hosts.allow: hole made for localhost to nessusd with nessusd:127.0.0.1 (this took care of my ssl error)

Upon trying to log into daemon I get the cert then prompted with failed login. I am also not getting anything showing up in my logviewer (gnome). For most other daemons I have had them automagicaly pop up (denyhosts for example) how can I get nessus to show up as well.

View 1 Replies


ADVERTISEMENT

Software :: Unable To Start Nessus Daemon

Sep 22, 2010

I have a backtrack distro on a usb stick. I wish to do the following :-
(a) Partition the usb stick to have a ext3 filesystem, so that the instln may be persistent for the changes. But the fdisk utility creates partitions as dev/sdb1p1 and /dev/sdb1p2. These however, could not be accessed by mkfs utility. How to overcome this problem.
(b) Next , I downloaded the nessus .lzm file and put it in the /base/module dir. But unable to start the nessus daemon. It suggests an error regarding unable to create /opt/nessus and /etc/nessus/nessusd.conf. I think starting nessus as root would help but the problem persists!

View 1 Replies View Related

Ubuntu Installation :: Add A User,the Nessus Daemon Is Running On My Machine?

Nov 20, 2010

after some tweaking i managed to get nessus installed on my machine. However i'm running into an issue when trying to add a user.The nessus daemon is running on my machine, i've registered. I think everything is peachy in that regard, but when i run:

Code:
zachadmin@ubuntu:~$ sudo /etc/init.d/nessusd restart
$Shutting down Nessus : .
$Starting Nessus : .[code].....

Obviously the command not found is my error, from what i understand there isn't a default user placed in the first time.So essentially i have thie program installed, but i can't access it.

View 1 Replies View Related

Fedora :: Pulseaudio Daemon Failed To Start?

Nov 24, 2009

I've been trying to get my internal microphone to work in F12, and as part of the things I've tried I had the seemingly bad idea of reinstalling pulseaudio. The problem now is that pulseaudio fails to start... The following is from /var/log/messages, and is repeated several times:Code:Nov 24 08:51:20 localhost pulseaudio[6300]: main.c: Daemon startup without any loaded modules, refusing to work.

View 9 Replies View Related

Fedora :: Abrt Daemon Failed To Start?

Jan 7, 2010

I have fedora 12 32 bits installed on a Macbook pro (intel core duo) I did "yum update" this morning, I have restarted the system and got the following message:Starting abrt daemon: abrtd: Failed to start: got sig 2 FAILEDI have browsed in the web but I cannot find useful information. Then I typed:$rpm -qa | grep abrt

abrt-libs-1.0.0-1.fc12.i686
abrt-libs-1.0.3-1.fc12.i686
abrt-addon-kerneloops-1.0.3-1.fc12.i686

[code]...

View 2 Replies View Related

Fedora :: F12 - MySQL Daemon Failed To Start

Jan 25, 2010

I using Fedora 12. When I am going to start MySQL server then error is come

MySQL Daemon failed to start.
Starting MySQL: [FAILED]
MySQL Details :
mysql-5.1.42-2.fc12.i686

View 7 Replies View Related

Fedora Servers :: DHCPD Daemon Failed To Start

Mar 5, 2009

I just got the problem while starting the dhcp daemon. Its showing failed. I need to start it for my clients to be autoinstalled. I am having CentOS 5.2 linux. I've installed all optional packages also while installing CentOS. How to start the dhcp daemon? I've tried the /etc/init.d/dhcpd start also. But it didnt work. Showing Failed.

View 1 Replies View Related

Fedora Servers :: MySQL Daemon Failed To Start?

Apr 17, 2011

I am not able to start mysql server...when i type command sevice mysqld start it saysMySQL Daemon failed to start.Starting mysqld: [FAILED]so how to solve this problem ?

View 10 Replies View Related

OpenSUSE Install :: Authentication Failed \ After Doing All The Configuration Rebooted And Tried To Login.Nothing Happened?

Jun 22, 2011

Now i will try to explain my problem.I just installed fresh 11.04 openSuSe 64bit.After doing all the configuration I rebooted and tried to login.Nothing happened.Googled some things, tried ctrl alt f1 and login as root, also tried to login as root, even changed my root password to be sure.Still, nothing happens, except for the thing that everytime I try to login as root it says authentication failed, but if i type my password bad it says bad password.

View 5 Replies View Related

Fedora Security :: Nessus - Nessusd Returned An Empty Report

May 25, 2009

After running
Code:
nessus-fetch --register <Activation Code>

I got
Code:
nessus-update-plugins could not be found in your $PATH
When I try to run a scan on localhost I get the message "nessusd returned an empty report".

Here's the entry in nessusd.messages
Code:
[Mon May 25 00:30:03 2009][13188] user mickey.harvey : testing 127.0.0.1 (127.0.0.1) [13189]
[Mon May 25 00:30:04 2009][13189] Finished testing 127.0.0.1. Time : 0.03 secs
[Mon May 25 00:30:04 2009][13188] user mickey.harvey : test complete
[Mon May 25 00:30:04 2009][13188] Total time to scan all hosts : 1 seconds
[Mon May 25 00:30:04 2009][13188] user mickey.harvey : Kept alive connection

I would like to get the scan working and make sure that nessus is updating the plugins. I have been looking though the nessus documentation and tried searching on Goggle without any success.

View 1 Replies View Related

Ubuntu :: Start Daemon On Login?

Aug 11, 2011

I'm creating a script that I want to run every time any user logs in (not only on the GUI, but also via SSH or via text terminal). The script will check if a daemon program is running (one per user or per session, haven't decided yet) and, if it isn't, will start it. I want this to be system-wide, not per-user. I thought about using /etc/profile (or creating a file in /etc/profile.d/) for CLI logins and /etc/X11/Xsession (same remark, Xsession.d) for GUI logins. My problem is that if the user uses a non-Bourne shell (e.g. TCSH) this won't work. Is there any initialization script that is run no matter what shell the user has?

View 2 Replies View Related

Fedora :: Failed To Contact Configuration Server

Mar 15, 2010

This seems to have just started. I read a .pdf document with evince and I get a whole bunch of messages like the following.GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See URL... for information. (Details - 1: Server ping error:IDL:omg org/ CORBA/COMM_FAILURE:1.0)What does this mean? why is evince trying to contact a server when I just want to read a document?

View 1 Replies View Related

Ubuntu :: Music Player Daemon Not Launching At Login?

Mar 16, 2010

I'm setting up Ubuntu based multimedia PC. I need instructions how to make Music Player Daemon to lauch at login. Tried to put it to startup programs but it still doesnt lauch. Could it be that wlan connection and network drive mount not are not established fast enough for mpd to launch? From terminal mpd launches normally and works perfectly.

Im using 9.10.

View 2 Replies View Related

Debian Configuration :: Can't Shutdown Cups And Avahi-daemon

Nov 15, 2015

I've been using linux for a few months. Recently I have installed debian jessie and I'm learning how to secure my laptop. I have installed

Code: Select allapt-get install sysv-rc-conf

to shutdown few services that I believe I don't need at boot which I found very useful. Among others I have deselected avahi-daemon, cups, cups-browsed, etc. The problem is that, after rebooting, when running:

Code: Select allnetstat -lntup

I still find 'avahi-daemon: r' and 'cupsd' running. I have tried

Code: Select allsystemctl stop cups
systemctl disable cups
systemctl stop avahi-daemon
systemctl disable avahi-daemon

But after rebooting these services are aklways running. I do not know whta to do.

Output of netstat -lntup

Code: Select all[*]Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      250/cupsd       
tcp6       0      0 ::1:631                 :::*                    LISTEN      250/cupsd       
udp        0      0 0.0.0.0:16409           0.0.0.0:*                           526/dhclient   
udp        0      0 0.0.0.0:68              0.0.0.0:*                           526/dhclient   

[Code] ....

I'm aware that cups seems to work just for my printer but I do not understand why I can't just disable it.

View 5 Replies View Related

Debian Configuration :: Nmbd Daemon Dies After Boot?

Mar 7, 2010

I am running a recently built Debian 'Lenny' system 5.0.4.I used the gui install and asked for desktop/file server/ I created a raid 1 systemsing two similar drives.Finally I set up some samba shares to use from my (wife's) windows PC. I wanted to use PC names rather than IP adresses to access the shares so activated wins.My Debian system, called arcturus, did not appear in windows network places. After much trial and error and googling found that the nmbd service had stopped.'/etc/init.d/samba restart' reported nmbd not present, stopped smbd and then restarted both. My networking then all came to life.There is a Ubuntu forum discussion around this subject and the consensus seems that the samba daemons are starting before the network is properly established. I have installed a work-around by putting the restart line in /etc/rc.local.But I'm concerned that I have some kind of configuration error.The following is a section of my log.nmbd after setting logging to level 3:-

Initialising global parameters
[2010/03/07 14:22:56, 3] param/params.c:pm_process(569)
params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf"

[code]....

View 5 Replies View Related

Fedora Servers :: Open LDAP Installation/Configuration Failed?

Sep 7, 2011

I am trying to configure and compile the pam_ldap and nss_ldap for MIPS architecture. for this they need ldap library. so I am trying to compile openldap code for MIPS first, but the configuration is failing.The command and options used for configuration is as follows.

./configure --host=mips CC=/opt/montavista/pro/devkit/mips/fp_be/bin/mips_fp_be-gcc LD=/opt/montavista/pro/devkit/mips/fp_be/bin/mips_fp_be-ld CFLAGS="-g -O2 -I/usr/include -I/usr/include/openssl" LDFLAGS="-L/usr/lib" --prefix=/mips/ldap --with-yielding_select=no

[code]...

View 1 Replies View Related

Ubuntu Networking :: Gammu SMS Daemon Version Compatibilities - Configuration

Feb 7, 2011

im Art and I'm currently taking my thesis, and would require me to use Gammu SMS Daemon. I downloaded Wammu,and Gammu SMS Daemon using the ubuntu software manager, and downloaded gammu again using apt-get i configured my gammu properly and i am currently able to send sms using gammu command

[Code]....

this was my gammu-smsd file... BTW i used xampp/lampp and its MySQL for database... im a little new to gammu sms daemon. I had read the manual. But still a little confusing.. did i miss something or have i configured something wrong?

View 9 Replies View Related

Fedora :: Gksu - GConf Error: Failed To Contact Configuration Server

Apr 3, 2010

Anyone what this gksu error is about (it repeats it three times)

gksu-2.0.0-1.el5.rf.x86_64.rpm
# gksu ls

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)

View 5 Replies View Related

Debian Configuration :: Fstab Configuration - Failed To Open /proc/filesystems: No Such File Or Directory

Aug 23, 2011

I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail  or so Failed to open /proc/filesystems: No such file or directory

[Code]..

View 14 Replies View Related

Ubuntu :: Update Mess Up Kubuntu - Error "KDE Daemon Failed To Load"

Sep 17, 2010

I installed Kubuntu 10.10 on my netbook because i tried the new unity and i didnt like it. So everything was fine with Kubuntu but suddenly a few minutes ago i did an update which messed up my wireless, i cant connect now, somethings in the taskbar are mess up like the volume icon is different. When KDE loads at the biggining i get an error saying KDE daemon failed to load. Is there a way to roll back the update or reload that thing whatever it is? I was starting to get use to KDE, i didnt had any issue even tho is a beta until now. aaaa why everything have to be so difficult.

View 1 Replies View Related

CentOS 5 Server :: Start Nfs Services And Get Error "Starting NFS Daemon: [FAILED]"

Aug 29, 2011

When I want to start nfs services ,I get this error, Starting NFS daemon: [FAILED]

View 1 Replies View Related

General :: System-auth Configuration \ Can't Login And/or Can't Login In The GUI Interface And A Terminal?

Apr 20, 2010

I'm hoping someone can help me out.I made configurations changes to/etc/pam.d/system-auth and /etc/pam.d/login. When these files are configured the way they are, I can't login and/or I can't login in the GUI interface and a terminal. Contents of /etc/pam.d/login

Code:
#%PAM-1.0
#line added per security guide

[code]....

View 2 Replies View Related

CentOS 5 :: Install Nessus Gui By Using Yum?

Feb 19, 2011

i want to install Nessus gui by using yum .HOw to Play with it .i want to conduct
Vulnerability assessments on the victim machine/ip.Can we use it for online scaning.if yes ?then how to perform ?

View 3 Replies View Related

General :: Best OS To Install Nessus On For Performance?

Aug 26, 2011

I have a machine that I want to install Nessus on it.
Nessus supports many Operating Systems:
Microsoft Windows
Mac OS X
Linux
FreeBSD

The full list is here: [URL]... What would the best OS to install Nessus on for performance be?

View 1 Replies View Related

Ubuntu :: How To Open Nessus - No Interface

Jun 28, 2010

I successfully installed the nessus. It was .deb file . first of all, I type
"sudo dpkg -i Nessus-4.2.2-ubuntu910_amd64.deb".
The output of this command was "You can start nessusd by typing /etc/init.d/nessusd start"
That's why I type that command and I get " $Starting Nessus : ." There is nothing like interface of this software, when I try to search GUI from synaptic package manager. So What should I do ?

View 3 Replies View Related

OpenSUSE Network :: XRDP - "Login Failed" Message When First Login Is Root

Sep 16, 2010

I have found this link "Login Failed" message when logging in through RDP

I am suffering from exactly these symptoms. Can anyone suggest what the likely cause is? How would that bug/solution relate to my environment: openSUSE 11.3/xrdp 0.4.1-85.1?

And lastly, how can I find out if the update implied under "Additional Information" has happened?

View 3 Replies View Related

Red Hat / Fedora :: Starting System Logger: Failed After Login To The System

Nov 17, 2010

When booting the system ,"starting system logger : Failed" after that i login to the system as usual but the system logger cannot start,even i use the service syslog restart command,how can i solve such problem ,thanks a lot

View 1 Replies View Related

Ubuntu Servers :: How To Get Nessus Package Installed

Nov 4, 2010

I want to install nessus. I run the following in the terminal:
sudo apt-get install nessus
I get a message that the package is not available and anther package replace it. However I am interested in nessus and not in openvas-client (the other package). So how can I get the nessus package.

View 5 Replies View Related

Software :: Whether NessusCleint And Nessus Server Are Available As Two Different Packages ?

Jun 30, 2011

Whether NessusCleint and Nessus Server are available as two different packages or they have been merged into a single package.

Earlier there used to be 2 diff packages one for Nessus Cleint and other for Server. But now i was not abel to find any package for clinet and in the only package thats available on nessus.org also does not contain any cleint in it.

View 6 Replies View Related

OpenSUSE Network :: Using Nessus To Evaluate Security Of Web Server?

May 7, 2010

I am using nessus to evaluate the security of a web server. I have started up the nessus daemon on the server, here's the netstat output:

Code:
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 *:ldap *:* LISTEN 3565/slapd
tcp 0 0 *:mysql *:* LISTEN 4026/mysqld
tcp 0 0 *:pop3 *:* LISTEN 3584/xinetd
tcp 0 0 *:sunrpc *:* LISTEN 3463/portmap
tcp 0 0 *:www-http *:* LISTEN 13855/httpd2-prefor
tcp 0 0 *:ssh *:* LISTEN 3577/sshd
tcp 0 0 *:nessus *:* LISTEN 6118/nessusd: waiti
tcp 0 0 *:smtp *:* LISTEN 3636/master
tcp 0 0 *:https *:* LISTEN 13855/httpd2-prefor
udp 0 0 *:sunrpc *:* 3463/portmap

It's listening on the default nessus port 9390. I am trying to connect to the nessus server instance using Open-VAS Client. I have generated the client and server certificates, I have pointed the client at the User Certificate File, the User Key File and I have a CA cert. I have created a user account on the nessus server. The problem is that when I try and log in from the Open-VAS client it keeps saying it can't connect. Is there anywhere I can check to see if it's being caught in a firewall, or where I can see if the connection is even making it to the server..

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved