Networking :: USB / Ethernet IP Address Selection
Jun 8, 2010
I have a usb device that is setup to use a networking interface. When I connect the usb device, ifconfig automatically shows a new interface "usbX", and it has an assigned IP address, e.g. "192.168.X.1" - yes, the "X" is the same number between the address and the interface name. Each time I connect the usb device, it gets a different ip address...
192.168.9.1, 192.168.10.1, etc (actually the device address ends in .2, the PC is .1)
How do I configure this device to always have the same address? Or maybe it's more accurate to ask, how do I configure linux to always assign the network address with this device?
View 2 Replies
ADVERTISEMENT
May 29, 2011
how to assign a address to my ethernet card all the options available
View 1 Replies
View Related
Mar 31, 2010
I had had my internet connection working using PPPoE, but after I did some tweaking and configuring on the machine (configuring Samba), I wasn't able to connect to the internet and on the syslog said:Code:Cannot determine ethernet address for proxy ARPI'm using dynamic IP address on my internet account. Is this problem related to Samba server configuration that is running?
View 2 Replies
View Related
Nov 23, 2010
have a doubt about the multicast address.I have read that IP and ethernet multicast address have the same last 23 bits. While an ethernet multicast address always starts with 01:00:5E. Changing the last 23 bits of the IP address into hexadecimal form and "adding" them to the first 24 bits we find the ethernet address but what about the missing bit??? For istance I have: 230.11.111.10 = 11100110.00001011.01101111.00001010 So converting the last 23 bits I have b:6f:a The final ethernet address will be 01:00:5E:b:6f:a . And what about the missing bit?
View 1 Replies
View Related
Aug 26, 2010
I've just arrived at uni and to set up my wifi apparently I need my "media access control which is listed as the phsyical address for ethernet adaptor local area connection." on windows you can find it by using the command ipconfig /all but that didn't work when i put it into terminal.
View 1 Replies
View Related
Dec 12, 2009
After upgrading two different machines from F11 to F12, one x64, one 32, I found that when I create an email and hit "To:" I see two entries for every entry in my contacts; anyone else see this problem?On the 32 bit, on a new account, I did an import contacts from a csv file, I see doubles and I do not see all my contacts.
View 1 Replies
View Related
Jun 18, 2010
How can I change the behavior of the selection buffer or a program that uses it ( I have xclip) to not send me text until the mouse button is released while clicking and dragging? This causes havok in the software I'm developing that tries to make use of the selection buffer. I need the full selection, not bits more bits more bits and then the full selection.EDIT: I cannot listen for mouse events such as button release outside of the GUI of my program.
View 2 Replies
View Related
Nov 23, 2010
How do you get correct ethernet/mac id of your local network card using python script? Most of the article suggests to parse the output of ipconfig /all on windows and ifconfig on linux. I am sure that this solution would work on windows but I am a linux starter and not sure the reliability of ifconfig on linux distros. Couple of other solutions on linux are:
Code:
def getHwAddr(ifname):
s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
info = fcntl.ioctl(s.fileno(), 0x8927, struct.pack('256s', ifname[:15]))
return ''.join(['%02x:' % ord(char) for char in info[18:24]])[:-1]
[code].....
View 2 Replies
View Related
Jun 17, 2010
What is the Linux command to clear IP address of an interface without bringing it down and/or restarting network services. Seems strange ifconfig is able to change IP address but has no option to clear it, or am I wrong?
EDIT:As simple as ifconfig eth0 0.0.0.0. They should have put it in the man
View 3 Replies
View Related
Jun 22, 2010
In my red hat Linux machine there was a Lan card using eth0. IP is asign to that network card and it is functioning properly. I add another ethernet card in my linux machineit was detacted and when i use the commandQuote:[root@localhost root] # ifconfig -ait show me both eth0 and eth1 lan cards.I can see Ip address in my eth1 ethernet card but When I enter into
Code:
[root@localhost root] # cd /etc/sysconfig/network-scripts
and i use ls command it only show me the file ifcfg-eth1 and with
[code]...
View 8 Replies
View Related
Sep 1, 2011
My laptop was working fine on wireless till the userinterface changed and it defaulted to ethernet and now it won't let me go back on wireless How do i disable ethernet?
View 4 Replies
View Related
Jul 23, 2015
I want to configure multiple virtual ethernet interfaces over a single physical ethernet interface (eth0) and for each virtual interface the MAC address must be unique and the IP address must be Static.Finally all the virtual interfaces must be able to communicate both internally and externally and the traffic should be captured using wireshark.
I need to have such kind of setup to communicate devices individually using one physical ethernet device.
Because I was fiddling with few kernel modules like MACVLAN and MACVTAP and successfully enabled those modules and rebuild kernel. Using macvlan and macvtap I can configure virtual interfaces with unique mac address and static IPs but while capturing packets using wireshark interfaces behave weirdly.
For example say on HOST machine I have 1 physical interface and created 3 virtual interfaces as shown below.
Interfaces :
eth0 (physical ethernet interface)
IP: 192.168.A.A
MAC: aa:aa:aa:aa:aa:aa
[Code] ....
First from above interfaces I started pinging eth0 internally from host machine in which it worked as usually.
Second I did same externally from other machine which is connected to the same network of Host machine, and this did work as usually.
Third I pinged first virtual interface veth0 both internally and externally and this also works and after that I did check source and destination MAC address using wireshark tool-where both showed up there respective MAC address.
Now triggers the issue, where I pinged second virtual interface same like I did for first one, but this time ping was success and where as in wireshark tool the MAC address for veth0 is picked by veth1. This is where I got stuck and this issue happened for all the remaining virtual interfaces.
I couldn't see any virtual interface showing their respective MAC address, as of the remaining except the first virtual interface has been picking the first veth0 mac address.
View 5 Replies
View Related
Oct 7, 2010
How can I determine full compliance:
Input data see below.
Code:
Code:
Code:
Result - ethernet devices about which I know the exact information :
Code:
View 3 Replies
View Related
Jul 7, 2011
it was working but after i installed updates and rebooted it could not get a ip address seems like strange timing it still registers under ifconfig it is not even working on the live usb anyway i can test to be sure it is the chip?
View 3 Replies
View Related
Dec 17, 2009
I have an HP Pavilion A6750F with an AMD Phenom 9650 Quad Core. 8 GB memoryThe NIC is a REALTEC Semiconductor RLT8111/81688 PCI Express Gigabit Ethernet Controller.The actual MAC address for the NIC is 00:24:21:55:DE:40I have loaded CentOS 5.3 on this host three of four times in various configurations and patching levels.THE PROBLEM: The system identifies the NIC as having MAC FE:FF:FF:FF:FF:FF.When this happens, the network connectivity obviously stops working.It identifies everything else OK, just maps the wrong MAC.I'm no sure how to troubleshoot this problem. I tried rebooting a couple times and once that fixed it. Usually it does not. I reloaded (gasp) Windows Vista on it and it worked ok.This last time, I reloaded CentOS it hung on the bootup (ASK ??), I reset it, it rebooted and everything looks ok; for now.
The system says it is presently using driver r8169
View 4 Replies
View Related
Feb 24, 2010
Currently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
View 5 Replies
View Related
May 12, 2011
I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :
Code:
num_nodes is set 64
INITIALIZE THE LIST xListHead
34
45
channel.cc:sendUp - Calc highestAntennaZ_ and distCST_
highestAntennaZ_ = 1.5, distCST_ = 550.0
SORTING LISTS ...DONE!
code....
View 1 Replies
View Related
Apr 24, 2010
Consider the following program:
Code:
#include <stdio.h>
#include <stdint.h>
[code]...
View 2 Replies
View Related
Dec 16, 2010
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
View 2 Replies
View Related
Mar 12, 2011
I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.
View 1 Replies
View Related
May 7, 2010
I am running my own Postfix mail server. Some time ago I noticed that most email was rejected because of the server's dynamic IP address. So I got a fixed IP address. However then I noticed that some mails got rejected due to failing the reverse DNS check. So my ISP told me to get a range of IP addresses and they could then create a PTR record for one of those addresses. That is now running but it turns out that the IP address used for the PTR record is a ... dynamic IP address. So Spamhaus PBL rejects my emails again.
View 1 Replies
View Related
Jun 7, 2009
I have a few external IP's assigned to me by my ISP. I have IPcop as my router/firewall. I am wondering how to bind 1 of my external ip's to my internal ip address. So I do not have to port forward, etc. For Example, 77.77.77.77 to 192.168.1.123 and on the server it see's the external IP address.
View 2 Replies
View Related
Oct 6, 2010
In my job I use some ethernet embedded devices. They take an ip address from dhcp server or auto ip. I only know mac address.How can I obtain ip from mac address? In other words I need a rarp packet generator.
View 6 Replies
View Related
Oct 28, 2010
I dont know for what reason, since 2 days, I started having this message whenever I try to start httpd.I commented "Listen 443", restarted httpd started correctly. I needed to comment "listen 443" in order to be able to start httpdWhat is strange is when I do
Code:
telnet mylinux 443
it responds
[code]...
View 9 Replies
View Related
Jan 18, 2010
I have a dedicated control computer that can only be accessed with web-browser (with its ip-address). My DHCP-server gives a static ip-address to the control computer (base on its mac-address). Somehow and after some time the control computer looses its ip-address (can't ping to it any more) ... and then I have to reset the control computer to get it to pick up the ip-address ... this is not a good solution since the control computer is not nearby. is there a way to force the control computer to renew its ip-address based on its mac-address
View 1 Replies
View Related
Apr 18, 2011
My security software has picked up multiple port scanning detections on my router/network and only the IP addresses are available. Is it possible to find out what the remote mac address is to see if the IP source has been spoofed? I've got a couple of different IP sources which were found scanning my ports.
I don't know if my IP and the remote IP address are on the same network or subnet for that matter which is the reason for my wanting to know what the mac address is to find out if its coming from the same remote machine.
View 8 Replies
View Related
Mar 1, 2010
Im trying to make an ubuntu server box my entrypoint to my networking. Meaning itll function as a server, a firewall, and a gateway. so i already installed dhcp3 and a dns server.
I have 2 ethernet cards in it. So now i wonder, should i the second card into a router's modem/wan port and make the router a switch? or should i plug it into one of the routers lan ports?
View 3 Replies
View Related
Apr 18, 2011
I have a server with two ethernet ports. I configured eth0 to be static, set at 10.1.10.148. I plugged in another router into the other ethernet port in order to configure that router. I configured eth1 to use dhcp. Using /etc/network/interfaces rather than gnome network manager. When I did this, I lost internet connectivity (internet routes through eth0 of course)
- Why did I lose internet connectivity?
In order to recover internet activity, I had to disconnect the new router on eth1 of course, and do sudo ifdown eth1. That wasn't enough however. After rebooting numerous times and pulling out my hair, I finally tried configuring eth0 as dhcp, rather than static, and this fixed the problem.
- Why didn't sudo ifdown eth1 solve the problem? What information was saved between reboots that somehow remembered that I plugged in the new router? Because my thinking was if /etc/network/interfaces was identical, and the network topology was identical, after a reboot everything should be restored, but it wasn't.
View 7 Replies
View Related
Oct 1, 2010
how to get the mac address from given ip address
View 3 Replies
View Related
Feb 8, 2011
I am basically wanting to use my Ubuntu 10.10 computer as a router. Note: Before you say just get a router please note that I am poor/cheap. I have two ethernet connections and one wireless connection on my netbook. I want to share the internet connection that is going into one of the ethernet cards through the other ethernet card and the wireless card.
DSL-->1sr Eth --> 2nd Eth (currently works)
DSL-->1sr Eth --> Wireless Card (Adhoc) <--(connects with limited connectivity AKA no internet)
The 2nd Ethernet card already has working internet, but when I connect to the Wireless card (through an Adhoc network), it cannot get an IP (I believe).
View 2 Replies
View Related
