Networking :: No IPv4 On Eth0 - No Connect To Router
Apr 20, 2010
I have tried clean installs of Knoppix v0.6, Xandros 2.0, and Ubuntu 7.1... same issue with all. I cannot seem to get eth0 (via chip on mobo) to get/have/use IPv4. ifconfig shows only IPv6. (I cannot paste any info because linux desktop is on different box.)
End result is that I cannot get the linux desktop to connect to my lan, either with dhcp or with static ip.
I have a belkin router configured as my gateway 192.168.3.1 and nothing fancy with the setup. I have dhcp open for 192.168.3.245 thru ...254 and at most there are only 4 systems in home connecting with dhcp at any time. all other systems have static addresses.
I have two decades of desktop and lan support under my belt, but relatively small amount of command line experience and almost no history with linux (unless you count a dozen unsuccessful attempts to burn linux distro install discs on this Vista desktop).
Therein lies the start of my prob. I need to build and manage a fileserver for my home, but cannot seem to get a working installer cd or dvd to burn from anything I download.
So I said to myself, "Self," I said, "you're a tech. Build a workstaion, use the DVD that came with your Linux Bible (2008 Ed.) to install one of the linux distros on it, then download a recent, stable server distro and burn it using the linux workstation."
Unfortunately, if I cant get an ipv4 connection to my home network, I cant get out to the Internet to download any newer ISO files.
So what am I missing or doing wrong? How do I tell linux to stop trying to use IPv6 and let me use IPv4?
BTW, eth0 works just fine if I install Windows on that PC, so I know its not bad HW. Could it be a driver issue? Or do I need to use some Terminal command to turn off IPv6 and reconfigure eth0 for IPv4?
View 5 Replies
ADVERTISEMENT
Apr 19, 2010
Current problem: fresh, clean install of Ubuntu 7.10 on known good hardware does not use/produce/get/have an IPv4 associated with eth0, so cannot connect to my home network for Internet access.
Background: Have been wanting to build and maintain a home file server for some time now. Have also been wanting some hands-on practice to help me progress from Noob to Intermediate, eventually advanced Linux Tech. (I have two decades of tech support experience, but only small fraction of that using command lines and almost zero Linux.)
Anyway, every time I download and attempt to burn a recent distro on my Vista Shuttle, I only end up making drink coasters and mini-frisbees. so I thought that I might have better luck if I used a Linux Workstation to download and burn a server distro.
That's where I an now. I took one of my fully functional WinXP systems offline, replaced the WXP HDD with an old 3.2 GB, dug out my 2008 edition Linux Bible, popped in the DVD that came with it, and installed Ubuntu 7.10.
Everything else seems to have progressed smoothly, but I cannot seem to get the onboard Via chipset ethernet controller to talk to the router. When I run "ifconfig" in Terminal, I see IPv6 info, but nothing for IPv4.
When I try to configure eth0, it doesn't matter whether I set it up for DHCP or static... nothing works.
Is there a command line tht I can use in Terminal to manually configure eth0 to use IPv4?
View 3 Replies
View Related
Aug 27, 2011
I'm having trouble getting my Ubuntu 10.04 machine (Sony Vaio VGN-SR490) to connect to the Internet by way of an Ethernet cable connected directly to my router.
I'm able to connect to the Internet using this same cable using a Windows machine, so there's something wrong with the way Linux is configured.
How do I got about figuring out what the problem is and solving it?
Here are my network settings on Linux:
$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
[Code].....
It looks like the network adapters list is empty. I will now install both Windows XP and Ubuntu Linux dual-boot. I'm still not able to access the internet, even through Windows. I'm wonder if this could be a hardware problem with the computer or a problem with the router itself. Other computers can connect to this same router, and work fine. (That's how I'm posting this after all!)
View 3 Replies
View Related
Jan 23, 2011
I'm working in windows, and that's why I have been able to access the network. In F14, I was able to access the router address while the internet access ain't. Tried restarting network, and still the problem persists. Tried [URL] and the only thing that i've infered is that IPv4 Failed: FATAL plus, the routing table showed 0.0.0.0 as one of the entries (Gateway). So, i've deleted the wired network configuration from the Network Configuration and checked whether the os would pick it up automatically. It still didn't work.
View 10 Replies
View Related
Jul 18, 2010
I downloaded wubi, installed ubuntu, and booted it up. Everything went smooth, it finished installing with no problems. It restarts again and I login. Firefox opens.....server not found.
That brings you to where I am now. It says that eth0 is connect. I manually changed the ip address, the netmask and gateway. Still I have no luck.
route reads as follows:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.1 * 255.255.255.255
[Code].....
View 3 Replies
View Related
Jun 17, 2011
i recently switched over from windows xp and instead of listing my 2wire router it just says eth0 now
View 9 Replies
View Related
Nov 6, 2009
I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
net.ipv4.ip_forward=1
Then I tried this on the laptop:
sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
View 12 Replies
View Related
Apr 22, 2010
My 9.10 has lost it connection to my router.Lucid finds it ok as Auto ethO , XP gets on the net ok as wellHow do I fix Karmic ? I click on network, it is greyed out but still lets me edit connections and add wired as auto etho but still no connection.Not sure what else to do ?ifconfig -a shows -
Code:
ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:22:15:20:1b:3f
[code]....
View 3 Replies
View Related
Apr 6, 2011
I am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
[Code]....
View 5 Replies
View Related
Oct 29, 2010
I'm forging a gateway server, We have 2 Internet connection that goes to a load balancer router, and goes to my centos server and from our server goes to a switch for Internet distribution or routing.
OS-CentOS 5.5
[root@server etc]# uname -srio
Linux 2.6.18-194.el5 i386 GNU/Linux
My eth0 and eth1 has the following configuration and IP
[root@server etc]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# VIA Technologies, Inc. VT6105/VT6106S [Rhine-III]
DEVICE=eth0
BOOTPROTO=none
[code]....
Disabling IPv4 packet forwarding but i already changed it to 1 at sysctl.conf One of the online forum says i need to configure the named.conf deleted some and run it(named.conf) and successful but still when I run network service I still get the :"Disabling IPv4 packet forwarding: net.ipv4.ip_forward = 0" The network is getting the IP range but it doesnt get any Internet connection.
View 3 Replies
View Related
Jun 22, 2011
I have a 10.04 box connected to a router with DHCP and wireless. Lathough it can connect through the wifi, I can't get the connection working with the ethernet cable (which is the one I wanna use by default).
Code:
I may add that it's the default auto connection, but I've also tried to create one manually setting the right ip address, gateway, etc, and attributing the same ip on the router to the MAC address of the card. I've also tried to edit manually the interfaces file, with no effect, or no good one at least. This log comes from a moment when nothing has been changed from the original 10.04 installation.
And I have connected a laptop to this very same cable, and the connection worked straight away...
View 1 Replies
View Related
May 24, 2011
I am having broadband connection, I need to connect broadband internet through eth0. Please give me some use full information for configuring this.
View 6 Replies
View Related
Aug 1, 2010
My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies
View Related
Jun 8, 2011
Is there a way to access today the openSUSE servers via IPv4? My ISP does not support ipv6, nor my router, and I can't install software right now in openSUSE, because it wants to access te servers via IPv6.
If would be grat to have the download.opensuse.org ipv4 address.
I really need to install some packages, they are required for my school project.
View 9 Replies
View Related
May 2, 2010
Upgraded To Ubuntu 10.04 The Other Day. And when I first installed it everything worked great except for my sound card which I fixed. But there was no problem with connecting to my Router via an Ethernet cable. Then I updated the video card drivers, restarted my PC and it wouldn't connect. It would try over around 1-2 mins then tell me its disconnected. No green light activity on the router / network card either.
I've reinstalled fresh copies of Ubuntu a couple of times now, Hoping to get the default settings back. But nothing has worked since.
I looked around the net and found quite a few people had this problem on previous versions of Ubuntu but it would seem most of there fixes were for there Version, so it hasn't helped me.
Heres some info:
ifconfig:
I've tried all the various things from dhclient to ifup/ifdown etc etc.
View 9 Replies
View Related
Jul 16, 2010
i was using ubuntu 9.10 till recently when i decided to upgrade to ubuntu lucid 10.04. turns out the internet icon shows connected after fresh installation but when i try to use firefox , after an long wait it shows server not found. i did a research of my own and found that i am not able to ping even my router.using sudo dhclient eth0 doesn't recieve offers , but surprisingly when i tried dhclient eth0 in root shell with networking internet got configured very quickly and i can ping the router and any website.i forgot to mention i have a wired connection which i am trying to connect and the net is working fine with windows 7 on the same PC.
View 2 Replies
View Related
Mar 29, 2010
A friend called me today and he explained to me that after his ubuntu install he was unable to connect to a wired Ethernet network. He says it trys to connect using ETH0 and then seemingly fails and disconnects. I have him run a if config and send me a pic. The very odd thing about it is He had a lot 5-8 INET6 address? The laptops is Acer extensa 4420
View 1 Replies
View Related
Jul 2, 2010
My machine has Ubuntu 10.4, installed a week ago. I'm connecting to the Internet with a Wireless 3G modem, the interface is named ppp0. Additionally, I have a network card that is connected to a home router, that's eth0. Everything works fine with eth0 disabled, all my apps can access the internet correctly. But, my issue is that when i enable eth0, i can't access the internet with any app.
So why do i need eth0 anyway? The thing is that i must share my internet connection with my sister, who is also connected to our home router. I planned to give her access by installing squid on this machine and configuring her browser to connect to squid. However, since none of my apps can connect to the internet while eth0 is active (whereas squid and all other apps work fine with eth0 disabled) I can't let her connect to squid while squid is working correctly.BTW selecting "use this connection only for resources on its network" under "routes..." of the ipv4 tab of "Auto Ethernet" made it a little better. Firefox and Xchat started to work with eth0 active. Squid still doesn't work though (althought it works just fine with eth0 disabled)
View 4 Replies
View Related
Dec 12, 2010
I have 2 LAN ports. one from the motherboard (on board) and the other from a lan card i bought a few days back. one is use for browsing the net, the other for a media player.
problem is i cant connect to both the eth0 and eth1 at the same time. i have to disconnect one of them to connect to the other. and this really gets irritating as it doesnt always work as flawlessly as it should. what am i doing wrong?
Output of "ifconfig":
Quote:
I'm on ubuntu desktop 10.10 64 bit.
View 8 Replies
View Related
Feb 5, 2010
My problem is little different then what I've seen here. I get the same message after inputting network name and password. I click connect and it just pops up again I don't get it. I'm running Ubuntu 8.10 for Ppc (PS3) I get no internet connection what so ever just the same message. The message I get is " authentication required by wireless network " What do I need to do to connect wireless to my router with my PS3 using Ubuntu 8.10? It does connect with a Ethernet Wire. I am new with Linux.
View 1 Replies
View Related
Feb 16, 2010
I have a question. I just bought an internet router which also has wireless connection and my notebook also has wireless LAN.I was able to connect the computer to the internet router very easy. But i dont know how to make it work wirelesss under fedora linux 12...i mean how should i setup the connection to the router so i will be able to have a wireless connection?
View 4 Replies
View Related
Feb 6, 2010
I have a router with 2 IBM Thinkpads connected. One Thinkpad is running Ubuntu, and the other is running XP.
They connect to the router with no problems.
I installed Ubuntu on a Sharp Moebius laptop and plugged in the network cable.
NOTHING.
I have tried pinging the laptop; nothing.
I am not sure where the problem is, because my Thinkpads have no problems connecting to the router, with both Ubuntu and XP
View 9 Replies
View Related
Apr 22, 2010
my LAN just suddenly stopped working. we had a power outage, and it just stopped. it will still recognize the network, but it wont connect. i was experimenting with setting up a web server (trying to set it up on the standard distro). i know its not the network card (on board) because i can put in my pci card and it still wont connect. it will connect when in the live environment. i thought that maybe it had updated, so i tried to boot from a different (older) kernel. that still didn't help.
i stopped apache. i was experimenting with portforwarding at the time (i had everything else working on my server), but i could not get it to work. after this happened, i restored the original settings on my router. i had applied the settings only a day before the power outage. everything still works on another computer on the network (also running linux). (all computers run 9.10) its almost like my router won't assign me an ip address.
View 9 Replies
View Related
Jun 23, 2010
I have a new belkin N1 router which I tested in somebody else's flat. It worked fine. When I got home I reset it by pushing a paperclip in the hole for 10+ seconds to erase this flat's internet connection settings (username and password and stuff). After this I plugged it the computer and tried to connect to it (wired connection) using 192.168.2.1 (this is correct for that router, it is not 192.168.0.1). But the browser says it is offline and cannot connect. The lights of the router cycle, the "modem router" light blinks continuously and the others briefly come on and go off again, every few seconds. I tried resetting it again, several times, leaving it off for a few hours, leaving it on for a few hours, etc.
View 2 Replies
View Related
Sep 5, 2010
I recently just upgraded my operating system to Ubuntu 10.04 LTS and I can't seem to get my wireless card to connect to our new Verizon Actiontec router. I am using an Encore Electronics 802.11n Wireless USB Adapter (model: ENUWI-N), which had worked with an earlier version of Ubuntu and our old router. The adapter recognizes the SSID of the new router but will not connect with the correct WEP key or even with the encryption turned off. I have tried deleting the wireless profiles and manually re-creating them and still no dice. I have also gone to the website of the chipset manufacturer and found the latest drivers (RT2870USB(RT2870/RT2770)) for the adapter, which, according to the Synaptic Package Manager, I do not currently have installed.
Where do I go from here? Do I need to install the new drivers, and if so how do I do that?
View 6 Replies
View Related
Oct 23, 2010
I wanted to try Ubuntu again but have gone wayback to an old 8.10 disk because I couldn't get 10.10 to work. The install with 8.10 went fine but the internet will not connect. The network manager shows eth0 grayed out and when going in to manage the connection it says 'never'. I'm using Vista with a broadband modem connected to a netgear router.
View 3 Replies
View Related
Nov 1, 2010
Im trying to setup Ubuntu for my buddy. After talking it up for ages of course i get a problem ive never seen be for . He is running 10.10 (or whatever the newest is lol) and when running windows it hooks up to the internet just fine through the router. however in ubuntu it will only connect when i plug it directly into the modem. Route gives no output. Kinda weird. router is Linksys Wireless G Broadband Router. WRT54G.I dont want him running back to windows before he even gets into it.
View 4 Replies
View Related
Nov 20, 2010
new to ubuntu and having difficultly connecting to my wireless router.It can see the router but will not connect keeps asking for password.usb adapter is working 100% as i can connect with it using xp 64bit.
View 4 Replies
View Related
Feb 3, 2011
It says my routor's name and signal strength but when I try to connect it tries for a while and then fails.
View 1 Replies
View Related
Mar 15, 2011
I think I have unique problem. I have a d-link DWL G510 rev c.(Austrailian) WiFi card in my pc which is detected as
Quote:
Network controller [0280]: RaLink RT2561/RT61 rev B 802.11g [1814:0302] in lspci -nn.
iwconfig shows:
Quote:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=6 dBm
Retry long limit:7 RTS thrff Fragment thrff
Power Managementff
ppp0 no wireless extensions.
Now sometimes it detects my wifi router and shows its ssid in nm-applet. but when I try to connect, it tries for 3 or 4 minutes and then fails. for most of time it even does not finds my router.
View 1 Replies
View Related
