I've just installed xterm, ant trying to run it from my windows machine using ssh. I have X11Forwarding yes on /etc/ssh/sshd_config when I use, MobaXterm, np, I can use xterm after I log ssh -X xxx
but when I use Cygwin, and do ssh -X xxx, and then xterm, I have: xterm XT error : Can't open display: xterm: Display is not set
/usr/bin/xterm Xt error: Can't open display: %s
I tried to connect to remote server ,which is installed Centos 5.4 x86, through Xmanager on windows 7, and got this error.
Quote:
/usr/bin/xterm Xt error: Can't open display: %s
At the remote server, I turned on firewall and after this I got the above-mentioned error message.
I do this accrding to instruction on remote server.
Quote:
2. Firewall (TCP/UDP Ports) Configuration
Open UDP port 177 from the PC to the remote host direction.
Open incoming TCP ports 6000~6010 from the remote host to your PC.
After adding these ports "/etc/sysconfig/iptable" as the enoder mentioned, /etc/init.d/iptables restart
3. Reboot the remote host and start Xmanager <- I could not restart remote server.
I am running hummingbird exceed on Workstation with an ip address of a.b.c.d, and connecting to a sun machine with IP address x.y.z.w running Solaris with XDMCP. From the sun machine, we commonly telnet to other sun and linux machines and run X applications.
We have just installed ubuntu 10.04, and I can telnet into that machine no problem.
However, running xterm on the ubuntu machine fails:
xterm Xt error: cannot open display a.b.c.d:0.0
I use Putty from my machine (named host1) to ssh into an OpenSUSE box (named box1) and would like to have a gui to use. I am trying to issue xterm and am getting the following error:
xterm Xt error: Can't open display:
xterm: DISPLAY is not set
If I do setenv DISPLAY other_machine:0 and launch a gui application I can send this application to my other_machine Is there any mean (utility or whatever) to send an OPEN application to another machine (by its pid eventually) So if I have an nedit open, and its pid is 13245, I could do something like send_to_display pid=13245 machine=other_machine:0
View 1 Replies View RelatedStart xpdf or gv. Click an xterm to be active and slide it over xpdf/gv. Vertical lines from xpdf/gv under the xterm stick to the xterm window above and make it unreadable.
The problem does NOT show with KDE default settings with display effects on but does show in fvwm, xfce etc, and in KDE without effects.
On a system with a Sandy Bridge integrated graphics (i5-2400) the problem went away by downgrading to xf86-video-intel-2.13.0. But it was not enough for another system with 945G which needed downgrading to xf86-video-intel-2.12.0.
i have fluxbox and i need to know how to copy things in xterm and paste them outside of xterm.
View 2 Replies View RelatedI have the following scenario that doesn't seem to work normally. I have a windows 7 pc from which I am using putty to connect to my other linux servers (all running redhat 5 and 6). So here is the scenario that works and one that does not work. And I'm trying to figure out the one that does not work. Scenario that works:
From windows 7 (putty) I ssh into Linux_Server_1.
echo $DISPLAY
localhost:10.0
I run xclock and I see it pop up on my windows 7 pc. I am using xming on windows 7 to help me populate the display from linux to windows. One that does not work:
From windows 7 (putty) I ssh into Linux_Server_1. Then from Linux_Server_1 I ssh into Linux_Server_2.
echo $DISPLAY
<no output>
I try to setup $DISPLAY with localhost:10.0 or 0.0 or even my windows 7 pc ip address:0.0 ....etc Then when I try to run xclock I doesn't work.
I get these error messages: Error: Can't open display: <ip of display>
Also as a side note all our Linux servers are sitting on one subnet. My pc is sitting on another subnet. I use vpn to connect to the subnet where the servers sit from my pc.
I have a xterm which can have 256 colors. How can I configure the prompt colors and ls output colors to take advantages of the 256 color values?
View 4 Replies View RelatedOn FC14, launching xterm gives log:[b16394@udp158975uds ~]$ xterm Warning: Cannot convert string "nil2" to type FontStructxterm: cannot load font -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso10646-1
View 2 Replies View RelatedError opening terminal : xterm
While start nano editor in terminal
I am new in Linux,i build nano editor on Linux,it compile successfully but when i open in terminal then error displays "Error opening terminal : Xterm" while nano help is running successfully.
View 14 Replies View RelatedI have a fresh install of OpenSUSE 11.4 64bit and I have installed the AMD Display drivers for my Radeon HD 5970. Everything seems to be working quite well. I have a multiple monitor setup (1280x1024 monitor and a 1920x1080 monitor).
I have my primary display set to 1920x1080, however when I try to enable the second display, I get a CRTC error that the display is over the maximum (1920x1920). If I enable both monitors at lower resolutions, there is no problem.
I have done a fair bit of reading and have been unable to determine where this maximum is set, or how to change it. I'd like to be able to run both monitors at their native resolutions.
i have just installed a redhat linux entprise 5 on my machine. I am trying to install a software and when i run the #install.ksf , my installation gets aborted and my install.log file shows this,
Error: Can't open display !
Environment variable 'DISPLAY' must be defined.
i just downloaded Nethack from [URl], and moved the extracted files to /usr/games. Then i changed the permissions in /usr/games/lib/nethackdir so i could access the lib files.
Nethacks runs in X, and it runs in terminal when im root. But for some strange reason it does not run in CLI when im not root, i get the message "Error: Can't open display:".
When trying to run X apps from terminal command line I getCannot open X display `:0.0'error.I tried export DISPLAY=0.0What do I need to do to permently fix this problem?
View 1 Replies View RelatedI was trying to remotely log in to my desktop which uses 11.3 from my laptop via ssh. For some reason I get an empty field for the command echo $DISPLAY. and as a result an xclock command results in error: can't open display. I tried to set it to localhost:10.0 and I get: Error: Can't open display: localhost:10.0
I've tried :0.0 and I get: Invalid MIT-MAGIC-COOKIE-1 keyError: Can't open display: :0.0 ssh used to work about a week ago before I performed various security updates. I was wondering what' the solution to this. I checked the /etc/ssh/sshd_config file and ssh_config file both have X11 forwarding on. Can anyone with more experience out there give me any ideas?
When I attempt to use Putty for xterm (to run DBCA for Oracle) I check x11 and put my IP Address in the Display field of putty. However, when I then try to execute ./dbca I receive the following:
Xlib: connection to "localhost:10.0" refused by server
Xlib: PuTTY X11 proxy: wrong authentication protocol attempted
Error: Can't open display: localhost:10.0
I notice the following when logging in to the server as well.
Last login: Fri Mar 19 13:51:19 2010 from 10.47.48.33 /usr/X11R6/bin/xauth: error in locking authority file /home/oracle/.Xauthority. These are the same steps I take successfully on all the servers. The above file exists on the servers I can initiate the GUI, but not on <server1>.
I have installed RHEL 4.6. But X server is not running. Wen i executed xclock Error: Can't open display: hostnmae:0.0
View 4 Replies View RelatedI have this problem. Whenever I issue command below,
Code:
ssh -X user@hostA
xclock
[code]....
I have configured an instance in AWS EC2. I am trying to set the display back so I can run x apps. I login using ssh -xy -i...
export DISPLAY=XXX.XXX.X.XXX:0.0
echo $DISPLAY to verify
xhost +
xhost: unable to open display "XXX.XXX.X.XXX:0.0"
I have commented out nolisten tcp as suggested HERE I have modified /etc/gdm/custom.conf as suggested HERE Actually, the last suggested modifying /etc/gdm/gdm.conf, but that file didn't exist, so I added the line: DisallowTCP=false to /etc/gdm/custom.conf I rebooted, and still I get: xhost: unable to open display "XXX.XXX.X.XXX:0.0"
For awhile I have had this issue with the command line and every time I try to complete any command that requires GTK graphics, It always returns the error "Error: cannot open display: 0:" The "EXPORT display" command that I normally use to fix this issue is not working. The only issue that I can think might be the cause for this could be my upgrade to natty (which was in fact a clean installation), or when I edited plymouth so that the startup and shutdown animations would match my laptop's native resolution (by the way I would also appreciate it if I could do the same with the startup animation, only the shutdown really works). If anybody know how I could resolve this issue I would greatly appreciate it. Oh and for specifics on my machine, I am using an ASUS N82 with an NVIDIA GEFORCE GT335M graphics card, running Ubuntu 11.04.
View 3 Replies View RelatedSo I just installed 32-bit Squeeze. I've done exactly two things since booting into the first install: pt-get install gtk+2.0, and ./firefox, so unless gtk did something, this might be an easily fixable problem with Debian itself. After installing gtk and trying to run firefox via command line, it tells me
Code: Error: cannot open display: :0 I googled a bit and couldn't come up with a solid solution, but the problem seems to be around other places. Any idea how to fix this?
Well after messing with compiz Opacity I managed to make all panels and windows transparent. Only thing I see is desktop background and icons. Tried ctrl+although+f1 and running gconftool-2 --recursive-unset /apps/compiz
Then a reboot. Same issue. Next ran metacity --replace I get: Windows manager error: Unable to open X display
I also had ever tried all methods they mentioned, but my problem is still there. I am using a MAC OS X 10.6 ssh a remote redhat server. I hope to see X of redhat on my own MAC. Below is what I've done: 'MAC_ip' stands for my mac; 'redhat_ip' stands for redhat server.
1) ssh to redhat server
2) change to root
3) type command: DISPLAY=MAC_ip:0.0
4) type command: export
5) Back to MAC
6) change to root
7) type command: xhost +Redhat_ip
8) vim /etc/ssh_config, add X11Forwarding yes
9) Back to redhat, type: xclock
I got below message: Error: Can't open display: MAC_ip:0.0 I also tried some methods to login as others suggested:
[Code]....
I wrote a simple code using Open Inventor(OpenGL) classes to print a Sphere in a .png file.I tested it on Windows and it worked well.But when I run it on Fedora 10, I got the following error with no output .png file:
Coin error in glxglue_init(): Couldn't open NULL display. Coin warning in SoOffscreenRenderer::renderFromBase(): Could not set up an offscreen OpenGL context.
Segmentation fault
FreeNX server is SUSE 11.2 /(i586)
Cliente is windows 7 (64)
NX> 148 Server capacity: not reached for user: usb
Gnome Forum have told me that changing the appearance of gdm I run: sudo -u gdm dbus-launch gnome-appearance-properties but I get this error: (Gnome-properties-Appearance: 18 047): Gtk-WARNING **: can not open display:
View 3 Replies View RelatedI use kubuntu (8.04) which does not have a root account.
[sudo] password for ts:
However, starting xclock or gvim on root shell on konsole has the "Can't open display" error appears.
Error: Can't open display: localhost:0.0
Press ENTER or type command to continue
I'm using Lucid 10.04 and usually ssh to many unix server. I have created aliases with server name, that executes xterm command as below.
I'm getting frustrated by inability to copy and paste using keyboard shortcuts, always have to use middle button. Is there any alternative out there?