Gnome Forum have told me that changing the appearance of gdm I run: sudo -u gdm dbus-launch gnome-appearance-properties but I get this error: (Gnome-properties-Appearance: 18 047): Gtk-WARNING **: can not open display:
View 3 RepliesI dont know why but I cant open the appearance properties anymore.The error was 'BadAlloc (insufficient resources for operation)'.(Details: serial 693 error_code 11 request_code 53 minor_code 0)(Note to programmers: normally, X errors are reported asynchronously;that is, you will receive the error a while after causing it.To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.)
View 2 Replies View RelatedI am running a HP dc5750 dual core computer with a 512MB Nvidia 7200/7300 graphics card my operating system is Ubuntu 10.10. Both my processors are operating at 98-104% cpu usage, it appears that gnome-appearance-properties is the culprit and the only way to return to normal is to end these processes. I have been setting up the desktop cube to my liking and the processor appears to rise up to 100% again. Would getting a 1GB graphics card correct this or is this a bug in maverick meerkat. Any advice would be appreciated. Please keep it simply as I am a Newbie to Linux and find things over-whelming at times. Also would running at 100% on both processors at indefinite periods of time harm my computer.
View 3 Replies View RelatedI am using SLES 10 SP3(x86_64). I was trying to install gtk/wxwidget through yast.
After that i rebooted my system, now system is failing to load in GUI mode.
If i can give the log of last few lines are as follows
Then it asks for login, only shell is available for me. How to login to gui mode..
I tried using the command gnome-session it gives error (gnome-session: 4101): Gtk-Warning **: cannot open display:
Also i tried using init 5, but again it prompts the my servername.
After upgrading to i am not seeing any drop down options being displayed in gnome-display-properties
No options are displayed under resolution or refresh rate :-(
Is this because I modified the default boot options
My boot options look like the image below:-
SUSE Paste
I recently installed opensuse 11.4 on a remote server. It has GNOME installed as a desktop. The problem I am experiencing is that when logged in through VNC, most of the GUI apps are not functioning, especially ones that require root privs. Example: The Add/Create users context does not function. After you supply root pw, nothing happens. If you launch it from a terminal, you see this:
jjmuw@g01:~> xdg-su -c /sbin/yast2 users
Xlib: extension "RANDR" missing on display "::1:1.0".
No protocol specified
No protocol specified
[code]....
(y2base:4872): Gtk-WARNING **: cannot open display: ::1:1.0
Followed by a hang. This is also affecting things like the Xen configuration contexts (creating/managing VMs).
For example, the gparted application menu item doesn't work; using it means that there is almost no filesystem support. The only way to get it to work is to open a terminal, run 'su -', and then open it from there.As another example, I tried creating a nautilus script to open files as root with a command like this:
Code:
for uri in $NAUTILUS_SCRIPT_SELECTED_URIS; do
gnomesu -c "gnome-open '$uri'"
done
When I try using it, it just fails. Typing out the command in the terminal gives this (tested on a text file):
Code:
No protocol specified
(gedit:13672): Gtk-WARNING **: cannot open display: :0
I'm pretty sure the problem is that it's granting privileges, but not using the full root environment, or something along those lines.
I've been searching for a permanent solution for some time now, but the threads containing the same error message never seem to be about the same issue.I want to:I'm not trying anything fancy, all I want to do is open a write-protected file with gedit as root, like so:
Code:
# sudo gedit /usr/bin/deadbeef
..but every time I try, no matter the file, I get this error message:
Code:
(gedit: [process #] ): Gtk-WARNING **: cannot open display
I already know: I can circumvent this by going:
Code:
# xhost +local:root
# sudo su
# export DISPLAY=:0.0
[code].....
I am using Ubuntu 10.04 & I went to change my appearance/theme & I got this error message failed to execute child process "gnome-appearance-properties"
View 2 Replies View RelatedI have a fresh install of OpenSUSE 11.4 64bit and I have installed the AMD Display drivers for my Radeon HD 5970. Everything seems to be working quite well. I have a multiple monitor setup (1280x1024 monitor and a 1920x1080 monitor).
I have my primary display set to 1920x1080, however when I try to enable the second display, I get a CRTC error that the display is over the maximum (1920x1920). If I enable both monitors at lower resolutions, there is no problem.
I have done a fair bit of reading and have been unable to determine where this maximum is set, or how to change it. I'd like to be able to run both monitors at their native resolutions.
I set-up my Sudo it works but when I use Gedit I get the following message
Jean-Luc@localhost:~> sudo gedit /etc/fstab
(gedit:7137): Gtk-WARNING **: cannot open display:
samething with /etc/sudoers
If I use vi it's ok, I can modify and save. In Fedora it run ok, but with opensuse?
Just finnished a fresh install of Squeeze. In a console, as root, when i type gedit i get: # gedit No protocol specified
(gedit:24284): Gtk-WARNING **: cannot open display: :0.0
When I become root and try to run gedit, I get the error:
No protocol specified
(gedit:219: Gtk-WARNING **: cannot open display: :0.0
This does not happen from my user profile....xhost + actually solves the issue....so I guess I just need to add the host root to the list of hosts allowed to access the x server...
I try xhost +root......but that does not work....
I need to get gksu to run programs. The goal is to be logged in as user1 and run firefox or google-chrome with user2 's settings stored in their own home directory. I'm trying the following with no success:
Code:
user1@hostname:~$ su user2
Password:
user2@hostname:/home/user1$ google-chrome
No protocol specified
(google-chrome:17144): Gtk-WARNING **: cannot open display: :2.0
Code:
user2@hostname:/home/user1$ firefox
No protocol specified
No protocol specified
Error: cannot open display: :2.0
Code:
user2@hostname:/home/user1$ gedit
No protocol specified
(gedit:17162): Gtk-WARNING **: cannot open display: :2.0
Im trying to access gparted, i get an error
Quote:
(gpartedbin:4918): Gtk-WARNING **: cannot open display:
I am connect via vnc if this helps.
I was running Ubuntu 10.10 Maverick with no big problems till last 3 days ago.
The update manager checked some updates to install and after installing them, I had no graphic desktop any more. Only the command line.
I tried to recover it by starting the X again.
Code:
But did not worked
So I've tried to install the nVidia driver again. I looked at nVidia Linux drivers site for how to do it and Ubuntu documentation and when I tried to
Code:
I just could not use gedit. It cannot open display. I googled for three days but could not solve it. I found some similar answers here at LQ but none was similar to my situation or worked even when I tried.
I am still learning the ropes on Ubuntu server. I am trying to set up samba, but when I use the "gedit" command, I get this error:
GTK-WARNING **: cannot open display
I had installed the gedit command by using apt-get and aptitude, but still no luck. I am using virtualbox to test Ubuntu Server 9.10.
I'm trying to install Fedora10 on my new desktop. It has Windows 7 beta on it and Vista. It starts up fine and I select install. For some reason my wired usb keyboard will not respond unless I press the caps lock button while it loads the begging. (I don't know if another button will work, ive only used the caps button since i can see the light come on) once it loads i skip the disk check and anaconda runs, i get the warning (mini-wm:1462): Gtk-WARNING **: cannot open display: :1 .
View 1 Replies View RelatedI was trying to remotely log in to my desktop which uses 11.3 from my laptop via ssh. For some reason I get an empty field for the command echo $DISPLAY. and as a result an xclock command results in error: can't open display. I tried to set it to localhost:10.0 and I get: Error: Can't open display: localhost:10.0
I've tried :0.0 and I get: Invalid MIT-MAGIC-COOKIE-1 keyError: Can't open display: :0.0 ssh used to work about a week ago before I performed various security updates. I was wondering what' the solution to this. I checked the /etc/ssh/sshd_config file and ssh_config file both have X11 forwarding on. Can anyone with more experience out there give me any ideas?
Just installed F15, was everything fine, but then gnome got away, from terminal I have<gnome-session:1951): Warning can't start display message.Before that I put in config file one extra line to start tint2 like <sleep 3 && tint2.Not sure was it the reason?
View 4 Replies View RelatedI've been trying to get familiar with this over the past 24 hours or so. I assume I've been somewhat successful in what I'm attempting to do, as I can work my way around a bit now and use some terminal commands. However, there is this display problem I seem to be encountering with certain windows which is extremely putting off. When I click options like 'File' or 'Edit' in a window, this is what I get. Here are the screenshots below.
This is what I get when I click the 'Volume' button in the Panel at the bottom of the screen. I have tried changing the Desktop Appearance Settings, Theme Settings but nothing seems to work. Although this is not a performance issue, it is hampering my vision of the various available options, and I would like to resolve it at once.
When I open startx it works fine bur I get an "cannot open display" error foe gnome-session. I already tried export DISPLAY=:0. ANY suggestions?
View 4 Replies View RelatedFreeNX server is SUSE 11.2 /(i586)
Cliente is windows 7 (64)
NX> 148 Server capacity: not reached for user: usb
To upgrade the system in preserving with vendor packages How should it?
View 3 Replies View RelatedI have the following scenario that doesn't seem to work normally. I have a windows 7 pc from which I am using putty to connect to my other linux servers (all running redhat 5 and 6). So here is the scenario that works and one that does not work. And I'm trying to figure out the one that does not work. Scenario that works:
From windows 7 (putty) I ssh into Linux_Server_1.
echo $DISPLAY
localhost:10.0
I run xclock and I see it pop up on my windows 7 pc. I am using xming on windows 7 to help me populate the display from linux to windows. One that does not work:
From windows 7 (putty) I ssh into Linux_Server_1. Then from Linux_Server_1 I ssh into Linux_Server_2.
echo $DISPLAY
<no output>
I try to setup $DISPLAY with localhost:10.0 or 0.0 or even my windows 7 pc ip address:0.0 ....etc Then when I try to run xclock I doesn't work.
I get these error messages: Error: Can't open display: <ip of display>
Also as a side note all our Linux servers are sitting on one subnet. My pc is sitting on another subnet. I use vpn to connect to the subnet where the servers sit from my pc.
I am trying to make wine work for explorer. I followed some instructions on this link [URL] To follow this link, I am supposed to
cd ~/ies4linux/ie6
cp user.reg ~/user.reg.old
gedit user.reg
1st and 2nd line went well 3rd line when I try to execute the command gedit user.reg (gedit:2573): Gtk-WARNING ** cannot open display I then /ies4linux/ie6# ls dosdevices(in blue) drive_c(in blue) system.reg(in white) userdef.reg(in green) user.reg
Same problem with 11.4 x64 DVD version (gnome default). System ends with text before showing logon screen allso in failsafe
[code]...
I am currently running Suse 11.3. I continue to get the following error when logging into the KDE login manager with my user account
"Warning: Cannot open ConsoleKit session: Unable to open session. The name
org.freedesktop.ConsoleKit was not provided by any .service files."
After acknowledging the error, it resets back to the login manager screen. If I login with root, I get the same message, but it continues on and logins into the session
We have a digital signage appliance built on SUSE 11.3 with a LAMP server that uses the flashplayer application to play a .swf file from localhost. It is a AOpen GP7A mini pc that has the nVidia drivers loaded. We have lots of customers that have been running the exact same system for over 6 months (we image the drive for each sale).
For some reason, my last customer is seeing the following problem shown below, and this linux configuration is way over my head. Everything else is working (local LAMP server is working, communicating with our production servers to get information works, etc). I have verified that it is screen 0 that is running (at least it shows with Ctrl-Alt-F7). I thought that it may have occurred because of updating the software with zypper up. I had the customer rebuild from the image being careful not to upgrade the software. The result was the same. The pc is a newer version compared to my bench pc, but there are multiple other customers running that same version just fine. So I am not sure if it is
The command is issued by a php script that is run in a root cron job. As I said, it works great on all other customer pc's including my bench system. I also tried to execute the command on a ssh terminal as the root user with the same result. I also upgraded my bench pc and it still worked properly.
The command being executed is sudo env DISPLAY=:0 XAUTHORITY=/home/svision/.Xauthority flashplayer http://localhost/flash/sign.swf &
the result (when run in terminal) is: No protocol specified (flashplayer:15077): Gtk-WARNING **: cannot open display: :0
I have the panel (taskbar) positioned on top. I then turned on "auto hide" in the panel properties (Gnome) to maximize the screen.The panel surely disappeared. The problem is that I cannot get it back no matter how much I hoover or click with the mouse - it is gone!...So how do I get it back??? I am rather new to Linux, but I figure that there should be a config file somewhere where I can set "auto hide" to false or something like this.
View 4 Replies View Related