i have just installed a redhat linux entprise 5 on my machine. I am trying to install a software and when i run the #install.ksf , my installation gets aborted and my install.log file shows this,
Error: Can't open display !
Environment variable 'DISPLAY' must be defined.
I wrote a simple code using Open Inventor(OpenGL) classes to print a Sphere in a .png file.I tested it on Windows and it worked well.But when I run it on Fedora 10, I got the following error with no output .png file:
Coin error in glxglue_init(): Couldn't open NULL display. Coin warning in SoOffscreenRenderer::renderFromBase(): Could not set up an offscreen OpenGL context.
Segmentation fault
I have the following scenario that doesn't seem to work normally. I have a windows 7 pc from which I am using putty to connect to my other linux servers (all running redhat 5 and 6). So here is the scenario that works and one that does not work. And I'm trying to figure out the one that does not work. Scenario that works:
From windows 7 (putty) I ssh into Linux_Server_1.
echo $DISPLAY
localhost:10.0
I run xclock and I see it pop up on my windows 7 pc. I am using xming on windows 7 to help me populate the display from linux to windows. One that does not work:
From windows 7 (putty) I ssh into Linux_Server_1. Then from Linux_Server_1 I ssh into Linux_Server_2.
echo $DISPLAY
<no output>
I try to setup $DISPLAY with localhost:10.0 or 0.0 or even my windows 7 pc ip address:0.0 ....etc Then when I try to run xclock I doesn't work.
I get these error messages: Error: Can't open display: <ip of display>
Also as a side note all our Linux servers are sitting on one subnet. My pc is sitting on another subnet. I use vpn to connect to the subnet where the servers sit from my pc.
i just downloaded Nethack from [URl], and moved the extracted files to /usr/games. Then i changed the permissions in /usr/games/lib/nethackdir so i could access the lib files.
Nethacks runs in X, and it runs in terminal when im root. But for some strange reason it does not run in CLI when im not root, i get the message "Error: Can't open display:".
When trying to run X apps from terminal command line I getCannot open X display `:0.0'error.I tried export DISPLAY=0.0What do I need to do to permently fix this problem?
View 1 Replies View RelatedI was trying to remotely log in to my desktop which uses 11.3 from my laptop via ssh. For some reason I get an empty field for the command echo $DISPLAY. and as a result an xclock command results in error: can't open display. I tried to set it to localhost:10.0 and I get: Error: Can't open display: localhost:10.0
I've tried :0.0 and I get: Invalid MIT-MAGIC-COOKIE-1 keyError: Can't open display: :0.0 ssh used to work about a week ago before I performed various security updates. I was wondering what' the solution to this. I checked the /etc/ssh/sshd_config file and ssh_config file both have X11 forwarding on. Can anyone with more experience out there give me any ideas?
When I attempt to use Putty for xterm (to run DBCA for Oracle) I check x11 and put my IP Address in the Display field of putty. However, when I then try to execute ./dbca I receive the following:
Xlib: connection to "localhost:10.0" refused by server
Xlib: PuTTY X11 proxy: wrong authentication protocol attempted
Error: Can't open display: localhost:10.0
I notice the following when logging in to the server as well.
Last login: Fri Mar 19 13:51:19 2010 from 10.47.48.33 /usr/X11R6/bin/xauth: error in locking authority file /home/oracle/.Xauthority. These are the same steps I take successfully on all the servers. The above file exists on the servers I can initiate the GUI, but not on <server1>.
I have installed RHEL 4.6. But X server is not running. Wen i executed xclock Error: Can't open display: hostnmae:0.0
View 4 Replies View Related/usr/bin/xterm Xt error: Can't open display: %s
I tried to connect to remote server ,which is installed Centos 5.4 x86, through Xmanager on windows 7, and got this error.
Quote:
/usr/bin/xterm Xt error: Can't open display: %s
At the remote server, I turned on firewall and after this I got the above-mentioned error message.
I do this accrding to instruction on remote server.
Quote:
2. Firewall (TCP/UDP Ports) Configuration
Open UDP port 177 from the PC to the remote host direction.
Open incoming TCP ports 6000~6010 from the remote host to your PC.
After adding these ports "/etc/sysconfig/iptable" as the enoder mentioned, /etc/init.d/iptables restart
3. Reboot the remote host and start Xmanager <- I could not restart remote server.
I have this problem. Whenever I issue command below,
Code:
ssh -X user@hostA
xclock
[code]....
I've just installed xterm, ant trying to run it from my windows machine using ssh. I have X11Forwarding yes on /etc/ssh/sshd_config when I use, MobaXterm, np, I can use xterm after I log ssh -X xxx
but when I use Cygwin, and do ssh -X xxx, and then xterm, I have: xterm XT error : Can't open display: xterm: Display is not set
So I just installed 32-bit Squeeze. I've done exactly two things since booting into the first install: pt-get install gtk+2.0, and ./firefox, so unless gtk did something, this might be an easily fixable problem with Debian itself. After installing gtk and trying to run firefox via command line, it tells me
Code: Error: cannot open display: :0 I googled a bit and couldn't come up with a solid solution, but the problem seems to be around other places. Any idea how to fix this?
For awhile I have had this issue with the command line and every time I try to complete any command that requires GTK graphics, It always returns the error "Error: cannot open display: 0:" The "EXPORT display" command that I normally use to fix this issue is not working. The only issue that I can think might be the cause for this could be my upgrade to natty (which was in fact a clean installation), or when I edited plymouth so that the startup and shutdown animations would match my laptop's native resolution (by the way I would also appreciate it if I could do the same with the startup animation, only the shutdown really works). If anybody know how I could resolve this issue I would greatly appreciate it. Oh and for specifics on my machine, I am using an ASUS N82 with an NVIDIA GEFORCE GT335M graphics card, running Ubuntu 11.04.
View 3 Replies View RelatedI am running hummingbird exceed on Workstation with an ip address of a.b.c.d, and connecting to a sun machine with IP address x.y.z.w running Solaris with XDMCP. From the sun machine, we commonly telnet to other sun and linux machines and run X applications.
We have just installed ubuntu 10.04, and I can telnet into that machine no problem.
However, running xterm on the ubuntu machine fails:
xterm Xt error: cannot open display a.b.c.d:0.0
Well after messing with compiz Opacity I managed to make all panels and windows transparent. Only thing I see is desktop background and icons. Tried ctrl+although+f1 and running gconftool-2 --recursive-unset /apps/compiz
Then a reboot. Same issue. Next ran metacity --replace I get: Windows manager error: Unable to open X display
I also had ever tried all methods they mentioned, but my problem is still there. I am using a MAC OS X 10.6 ssh a remote redhat server. I hope to see X of redhat on my own MAC. Below is what I've done: 'MAC_ip' stands for my mac; 'redhat_ip' stands for redhat server.
1) ssh to redhat server
2) change to root
3) type command: DISPLAY=MAC_ip:0.0
4) type command: export
5) Back to MAC
6) change to root
7) type command: xhost +Redhat_ip
8) vim /etc/ssh_config, add X11Forwarding yes
9) Back to redhat, type: xclock
I got below message: Error: Can't open display: MAC_ip:0.0 I also tried some methods to login as others suggested:
[Code]....
FreeNX server is SUSE 11.2 /(i586)
Cliente is windows 7 (64)
NX> 148 Server capacity: not reached for user: usb
Gnome Forum have told me that changing the appearance of gdm I run: sudo -u gdm dbus-launch gnome-appearance-properties but I get this error: (Gnome-properties-Appearance: 18 047): Gtk-WARNING **: can not open display:
View 3 Replies View RelatedI use kubuntu (8.04) which does not have a root account.
[sudo] password for ts:
However, starting xclock or gvim on root shell on konsole has the "Can't open display" error appears.
Error: Can't open display: localhost:0.0
Press ENTER or type command to continue
I am trying to run a java .class file by double-clicking it. So far my attempts at running it have been successful, but I don't' know how to keep the display open to see what the output is.
View 6 Replies View RelatedI have just upgraded to Fedora 13, and am trying to use the experimental Nvidia driver to enable Compiz desktop effects. The driver appears to be working correctly, but when I enable desktop effects, my text/icons/option menus are inverted (mirrored on both x and y axis's). Can anyone help me solve this issue? am i going to have to go to the proprietary Nvidia graphics driver?
View 8 Replies View RelatedI recently installed opensuse 11.4 on a remote server. It has GNOME installed as a desktop. The problem I am experiencing is that when logged in through VNC, most of the GUI apps are not functioning, especially ones that require root privs. Example: The Add/Create users context does not function. After you supply root pw, nothing happens. If you launch it from a terminal, you see this:
jjmuw@g01:~> xdg-su -c /sbin/yast2 users
Xlib: extension "RANDR" missing on display "::1:1.0".
No protocol specified
No protocol specified
[code]....
(y2base:4872): Gtk-WARNING **: cannot open display: ::1:1.0
Followed by a hang. This is also affecting things like the Xen configuration contexts (creating/managing VMs).
When I open startx it works fine bur I get an "cannot open display" error foe gnome-session. I already tried export DISPLAY=:0. ANY suggestions?
View 4 Replies View RelatedI have transmission-daemon running on a remote computer, which I can access via ssh. Daemon is managed with an /etc/init.d script, and the problem is that when I'm logged into the remote computer over ssh, any attempt to start/stop/restart the daemon results in "Cannot open display:" error.
Code:
Cannot open display:
I've read a number of topics on similar issues with X applications, but the question that is bugging me -- why would a CLI app request access to display?
There's also Webmin web-interface available, and everything works just fine if I use it to control the transmission-daemon. I should also probably mention that some time ago the script worked ok, but mysteriously broke, though no significant changes to the system had been made (i.e. only tweaks to separate applications' config files).
The script in /etc/init.d looks like this:
Code:
I'm trying to install Fedora10 on my new desktop. It has Windows 7 beta on it and Vista. It starts up fine and I select install. For some reason my wired usb keyboard will not respond unless I press the caps lock button while it loads the begging. (I don't know if another button will work, ive only used the caps button since i can see the light come on) once it loads i skip the disk check and anaconda runs, i get the warning (mini-wm:1462): Gtk-WARNING **: cannot open display: :1 .
View 1 Replies View RelatedEver since upgrading to Fedora 14, my system has been almost unusable. I can only have a few windows of anything open before I start getting messages about:
Maximum number of clients reachedMaximum number of clients reachedMaximum number of clients reachedMaximum number of clients reachedxwininfo: unable to open display ':0.0'
I am unable to open any new windows then and lots of programs crash.
When things are still running correctly.
A few minutes later:
1. Does Fedora 12 support ICU 4.4 Development Milestone 3 (ICU 4.3.3) with Unicode 5.2 full integration.(M3) ?
Microsoft's Uniscribe (usp10.dll) actually does not, neither in Windows XP nor in Windows 7. Will say is it possible to display complex scriptures like Devanagari, Avestan, Arabic etc. in Open Office Writer 3.1.1 via Fedora 12?
2. Is there any feature in Fedora 12 to build one's own Keyboard Layouts (like Microsoft's, Keyboard Layout Creator which isn't able to create Keyboard Layouts using Unicode Ranges bigger than U+ffff)?
Well this is my first time using redhat 7, the install went fine and webserver, mysql, phpmyadmin are all working......great
The only problem i have is the remote desktop
I have set the password in preferences/remote desktop run command vncpasswd and set password
In services vncserver i get this message......... xsetroot: unable to open display '' Xvnc is stopped and vncserver failed. The error was: xsetroot: unable to open display '' Shutting down VNC server: 1:user1[FAILED]
Starting VNC server: 1:user1 [FAILED]
My vncservers file looks like this
I have tried restarting service using root login and user1
I installed Open Office 4 on Debian 8 but when I run the program I get this error message.
root@localhost:/home/paul# openoffice4
No protocol specified
No protocol specified
/opt/openoffice4/program/soffice.bin X11 error: Can't open display:
Set DISPLAY environment variable, use -display option
or check permissions of your X-Server
(See "man X" resp. "man xhost" for details)
Open Office works fine when I run the command "startx" in the Konsole but so far I haven't been able to configure it.
We have a digital signage appliance built on SUSE 11.3 with a LAMP server that uses the flashplayer application to play a .swf file from localhost. It is a AOpen GP7A mini pc that has the nVidia drivers loaded. We have lots of customers that have been running the exact same system for over 6 months (we image the drive for each sale).
For some reason, my last customer is seeing the following problem shown below, and this linux configuration is way over my head. Everything else is working (local LAMP server is working, communicating with our production servers to get information works, etc). I have verified that it is screen 0 that is running (at least it shows with Ctrl-Alt-F7). I thought that it may have occurred because of updating the software with zypper up. I had the customer rebuild from the image being careful not to upgrade the software. The result was the same. The pc is a newer version compared to my bench pc, but there are multiple other customers running that same version just fine. So I am not sure if it is
The command is issued by a php script that is run in a root cron job. As I said, it works great on all other customer pc's including my bench system. I also tried to execute the command on a ssh terminal as the root user with the same result. I also upgraded my bench pc and it still worked properly.
The command being executed is sudo env DISPLAY=:0 XAUTHORITY=/home/svision/.Xauthority flashplayer http://localhost/flash/sign.swf &
the result (when run in terminal) is: No protocol specified (flashplayer:15077): Gtk-WARNING **: cannot open display: :0
