I'm using this xmodmap script to move the modifiers the way I like them.
Code:
!note: This disables iso_level3_shift/mode_switch, maybe fix later
clear control
[code]....
I have a problem with a note on the server. When I try to open it I get the message "OOPS-D-1594appserver96743". I can't open or delete this file anymore. Since I have this problem the sync with Tomboy also doesn't work. Is there way to delete this broken note on the server?
View 1 Replies View RelatedI am using an Apple Keyboard (DK-layout) on my PC running Ubuntu 10.4. The problem: My key used to type <, > and is swapped with the key used to type and If I connect a standard PC-keyboard with DK-layout using USB, it works just fine. The problem exists both in the console and X. I solved the problem in the console by installing the console-keymaps package, made a copy of dk-latin1.kmap.gz and swapping keycode 86 with keycode 41 and loading the new keymap with the loadkeys command. I only need to figure out how to load the new keymap at boot time.
However, in X, I want to do exactly the same. I suppose I have to use Xmodmap. I simply can't figure out how to do it.
So I run "xmodmap" in my xinitrc to make caps lock a second control button, but for some reason its not sticking. I'm not using a desktop environment, just running xmonad.If I run "xmodmap ~/.Xmodmap" once X is started, it works fine, but it won't run in my xinitrc.
View 3 Replies View RelatedI'm trying to learn swedish, and I want to remap some of my key to be able to write the special chars. xmodmap -pke" gives me the current config, and most of lines are like that (6 keysyms) :
Code:
keycode 24 = a A a A adiaeresis Adiaeresis
But I actually can't access 2 of them, the #3 and #4.
[code]....
So, I read a lot of PDFs and I would like to be able to take notes on it and export as a pdf so it can be read by other PDF viewers. I've read a few older posts about this and xournal sounded like a good option. I've tried whytboard a little and didn't really seem like what I wanted. I also like zotero for research stuff and the note taking they have for webpage SS and documents is GREAT but I haven't been able to get pdf to work for note taking or maybe it isn't implemented yet? If there was a way to make Zotero notes to work with pdf that would be perfect!
Also, its been a few years since the last pdf notes post that I could find, what are people using these days? any noteworthy programs?
In previous versions of ubuntu I used to reshuffle the ALT, SHIFT, and TAB keys using xmodmap.
Specifically, I had a file called ~/.xmodmap-mejia which reshuffled the keyboard, and I called that file from the startup applications (I had added it to system>preferences>Startup Applications).
However, in Ubuntu 10.4 it does not work. If I call the script after the computer has loaded, it works perfectly, but it does not have any effect as a startup application. It is as though changes effected by the script that calls ~/.xmodmap-mejia gets overwritten later on by the default keyboard binding.
As things stand right now, I have to run the script manually every time I turn on my laptop. Which, of course, is very annoying.
Any ideas of how to fix this?
I just upgraded machine to natty, after which the xmodmap configuration remapping capslock stopped working (as in not doing anything at all). Running xmodmap manually (-e "clear Lock") doesn't have any visible effect either. I haven't tried doing this on another machine (I'm only close to one machine running ubuntu and reinstalling seems rather overkill), but the same config worked before the upgrade, and is working on another machine running arch.
Is anyone else having these issues and, if so, has anybody found a solution? The line of interest is, simply, "clear Lock".
I was just wondering if Ubuntu developers were thinking now or in the future of introducing support for RIM BlackBerry devices?(I have previously read comments from Apple device users (iPods etc.) questioning why their devices were not supported so I suppose I am just evening things up a little for us BlackBerry users out there!
View 2 Replies View RelatedI am looking for a tree style note app that can encrypt its files. Something like Zim in layout and function.
View 4 Replies View RelatedI recently installed Debian 8.1 on an old (2008 maybe?) macbook. I would like to use the right hand side apple/command key as a right click. I've been using xmodmap commands in the terminal, but I'd like to write a shell script to do it automatically on boot or on login.
I've tried init.d, I've tried crontab, I've tried rc.local.
The xmodmap commands I am calling are Code: Select allxmodmap -e "keycode 134 = Pointer_Button3" and then Code: Select allxkbset m
my shell script is as follows
/usr/keymap
Code: Select all#!/bin/bash
xmodmap -e "keycode 134 = Pointer_Button3"
xkbset m
I've modified keymap to be executable, just typing /usr/keymap into the terminal will map the keys correctly. I've tried with and without the .sh suffix. I've tried adding sh before the file path in crontab. I've also tried adding sleep 20 inside the shell script as well as inside crontab joining the two commands with &&
To reeanable CTRL-ALT-BKSP (since 11.2), you use:
setxkbmap -option terminate:ctrl_alt_bksp
It works. However if you map keys with xmodmap, it's gone. In whatever order you use them, setxkbmap and xmodmap are always conflicting. Running xmodmap immediately disables CTRL-ALT-BKSP, while running setxbbmap reverses key mappings to their default.
I am using a Swedish keyboard, and I want to be able to type braces easier.
I planned to map AltGr + to '}' and AltGr + to '{'. However, nothing really changes. I have some other stuff in my .Xmodmap so I know that it gets loaded allright. Here's what I have so far:
keycode 35 = slash asciitilde dead_ogonek section dead_ogonek section
keycode 49 = asciicircum onehalf
keycode 66 = F10
clear Lock
[Code]....
I did read the grammar section of xmodmap but still couldn't figure out how I could do it.
View 1 Replies View RelatedI recently got a Logitech G11-keyboard for my Ubuntu 9.10 64-bit box. My question is xmodmap related and not restricted to this particular keyboard, nor to the distro I am using. The keyboard has a.o. 18 G-keys. These have been successfully defined in /usr/share/X11/XKeysymDB as per [URL] and I have a ~/.Xmodmap file that matches keycodes to the names in XKeysymDB.
My .Xmodmap definitions are rather simple, e.g. 'keycode 175 = G1'. So I do not define any value for modifier combinations, nor do I know how to do this.
And here's my real question. How should I define these keys so that the Crl-, Alt-, Meta-, Super- etc modifiers work with these keys?
With the current setup, the modifier versions of these keys do only work for the second keypress, e.g. the first Ctrl-G17 is perceived as a G17 keypress, and the second and remaining Ctrl-G17 presses are correctly received as a Ctrl-G17.
I would be happy to read an explanation of this behaviour, and even more so, about how to properly define them so that the base key as well as the modifier versions would be available.
If the odds are a million to one against something occurring, chances are 50-50 it will.
[URL] and go2 places!
I have a custom .Xmodmap file to change the keyboard layout. The problem is that sometimes the keyboard layout changes back to the default. I have seen the lights on the keyboard blink at times, so I tried unplugging and reconnecting the keyboard and yes - that reset the layout. I can see keyboard removed/detected entries in the logs as well, so I guess my keyboard reconnects sometimes, I don't know why. However the solution from the post earlier (to rename the xmodmap file to ~/.Xmodmap) did not work. So is there another default filename I should use? Or do I have to enable xmodmap to run when a keyboard is plugged in somehow?
The only thing I can think of right now is to monitor /var/log/Xorg.0.log for "Adding input device USB Keyboard" and running xmodmap when that happens... but I'm really hoping for a better solution.If I can't fix the xmodmap problem, maybe I can fix the usb disconnects.I read something about power saving settings for usb. After some digging, I found that those settings are in /sys/bus/usb/devices/.../power/. However, disabling autosuspend for the hub did not seem to work (it was already disabled for the keyboard).
But I found something else in kern.log. Perhaps the keyboard disconnects has something to do with static electricity?
Code: Select all[ 7078.175830] usb 1-10-port3: disabled by hub (EMI?), re-enabling...
[ 7078.175888] usb 1-10.3: USB disconnect, device number 4
[ 7078.624349] usb 1-10.3: new full-speed USB device number 6 using xhci_hcd
[ 7078.729012] usb 1-10.3: New USB device found, idVendor=04d9, idProduct=0125
[ 7078.729014] usb 1-10.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7078.729016] usb 1-10.3: Product: USB Keyboard
I have a Mac keyboard where the Alt/Win (i.e. Option/Command) keys are inverted compared to a regular PC keyboard, and I'd like to swap them. I haven't had any luck with xmodmap so far. The standard configuration is as follows:
shift Shift_L (0x32), Shift_R (0x3e)
lock Caps_Lock (0x42)
control Control_L (0x25), Control_R (0x69)
[code]....
ever since i installed 11.1 last summer, there has been this four note chord that sounds off at seemingly random times. (it's not in 10.3 as i'm still running two of them.) i've not been able to find what it is and turn it off. at first i thought it was thunderbird, nope. then something in firefox, don't really think so. it's not a system sound that i can find. sure would like to disable it.
View 2 Replies View RelatedIs it possible to make a key print a different character while a certain other key is pressed using xmodmap?
View 14 Replies View RelatedI have slackware 13.37-64 bit with xfce. I have a "microsoft wired keyboard 600" keyboard and want to remap it to use the right win key as ctrl. With xev i see that the keycode for the specific win key is 134.
Then i run:
Code:
But nothing changes. Even if i manually configure the .Xmodmap file in my /home i see no change at all.
I'm trying to install fedora 10 onto the HP mini note, I have read how to install from another forum but it does not seem to work. I have setup a USB install using unetbootin. I only get white box lines for a mouse cursor the when it finally begins like it is about to boot into the live installation it freezes and can go no further.
View 2 Replies View RelatedTitle is self-explanatory. I turn on swap, restart, and it's off again. Ubuntu 10.10 64-bit. I tri-boot with Win7 (32-bit) and LMDE (32-bit) if it matters.
View 9 Replies View RelatedI set up Plymouth and now it disables the GUI. I can only use the command line. It looks ugly and then it goes to TTY1.
View 2 Replies View Relatedso i've tried doing the whole /tmp as tmpfs thingy and it works!
View 4 Replies View RelatedI tried
Code:
tomboy --title-note "To Do"
but it returns
Quote:
[INFO 14:55:56.264] Initializing Mono.Addins
and opens in notification area.
but the note does not open.
In Fedora 10 they decided to change to "evdev", so if you used xmodmap in F9, these mapping have changed in F10 and F11 for that matter. In order to find the new key values start
Code:
xev and press a button you would like to know the keycode for. Write this value down. When done, make a file ".xmodmap" and put in the values. "man xmodmap" explains the format. Not easy to understand! So here is how mine looks like.
Code:
clear Lock
keycode 112 = Caps_Lock
keycode 118 = Delete
keycode 119 = Home
[Code]...
This layout is MUCH more logical than the original. Now Delete is the key just to the right of the Backspace key. Back spaces deletes to the left, and Delete deletes to the right, so these keys shoudl of course be next to each other Page Up, Page Down, Home, and End now have the same structure as the arrow keys below. This layout makes it much easier to navigate without looking at the keys, because now the layout makes sense And why shouldn't 0 be to the left of 1? of course it should. 0 is lower than 1.
I'm looking for a decent program to take notes on my Lenovo tablet laptop. What's your favorite?
View 1 Replies View RelatedI've discovered BasKet, and love it. However, I don't use KDE, and installing it on something else (CrunchBang in my case, which is Ubuntu-based) can mean a huge number of dependencies. (e.g. 28 MB just for kde-icons-oxygen, an icon theme). I don't know if most of them are actually needed though - relatively few "k..." programs are actually showing in the task manager when I run basket: kded, kdeinit, kio_file, klauncher, and knotify.
View 1 Replies View Relatedthis morning after the latest updates for slackware-current my mrtg-2.15.2 from slackbuilds failed with
Code:
Bareword "P_DETACH" not allowed while "strict subs" in use at /usr/bin/../lib/mrtg2/MRTG_lib.pm line 1133.
Compilation failed in require at /usr/bin/mrtg line 89. BEGIN failed--compilation aborted at /usr/bin/mrtg line 89. As there's currently no newer version for mrtg on slackbuilds, i downloaded mrtg-2.17.0.tar.gz from oetiker's page and compiled it. Changing path in crontab and it works well.
I installed Ubuntu 10.10 on my Windows machine a couple of days ago via wubi (with no partition), and it seems to be working. However, I have a problem: When I press any of the 'special' keys on the keyboard (Vol up, down, mute, and various others), the left-click on my mouse disables. I'm using a Microsoft Digital Media Keyboard 3000, which has a lot of special keys (and the f keys are special by default), so I've been having trouble not disabling my mouse. Anyone know what the problem is, how to resolve it? And on top of that, how do I make the special keys work?
View 9 Replies View Related