Ubuntu :: Windows Won't Boot After Changes Made In Grub
May 18, 2010
My computer originally had Vista installed on a sata hdd, and I added a second hdd (IDE) to install Ubuntu 8.04 and had been working great. Everything installed easy. few months ago I downloaded and reinstalled 9.10. That also worked good. I have been telling others about how well it has been working for me. I haven't had any trouble fixing any of the minor problems that I did come across like playing encrypted dvds.Well last week I upgraded to 10.04 using update mgr and it wanted to update grub. so i went ahead and let it.
after rebooting to Ubuntu (which is now a little slower than 9.10), the login screen page was shifted to the right. everything else was fine after logging in. windows also booted up ok. I found some info on a forum that helped me change resolution for grub, and I think I may have done more custom changes that I read online. everything seemed ok until this week. I try to boot into windows but after selecting the windows loader, the page just goes black and does nothing (cpu fan is working hard and doesn't slow) im not sure if i moved grub to wrong partition or if its configured to boot the right windows partition.I have two partitions on sata hdd. one is just the windows recovery. the IDE has Ubuntu only.
I've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ==============================[code].....
I have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
Whenever I select Windows 7 under GRUB, it just hangs at a flashing underscore windows 7 is installed under my first primary partition, what should the GRUB section look like for it? I can't check what mine looked like because this happened:I started up the windows 7 recover (another option under GRUB, on hd(0,3). 7 is on hd(0,1)) and it worked. I decided that i wanted to try something else before i restore my windows 7 partition to its factory state, so i exit the recovery thing. Next thing I know, my Ubuntu partition is completely gone, along with my grub.cfg files -.-
Partitions are like this in this order: sda1: Windows 7 (can't boot into) sda8: ubuntu (gets erased) sda5: partition i'm going to use soon for another distro
[Code]...
oh, and by default, there was like 20 MB of free space in front of my windows partition (idk why asus did that) and when i shrunk my first partition (the windows one) it moved it all to the left -.- do you think something when wrong while doing that?
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.35-22-generic Found initrd image: /boot/initrd.img-2.6.35-22-generic
HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
Back in July I bought an Acer Aspire ONE KAV60 with Xubuntu installed on it. I used to run Linux a long time ago but had not messed with it for a couple of years and I was surprised to find out how much more "user friendly" Linux had gotten (With Ubuntu anyways). There are more and more GUI programs/processes now days which makes everything easier to do, however there are a couple of things that I have found in the last few months running Linux only on my little netbook.
When I downloaded Ubuntu 10.04 LTS Lucid and installed it from the Xubuntu, I was quite satisfied with the general desktop setup and ease of the operating system. I loved it, it was like going from OS/2 to Win95 all over again! (I'm not that old, I just started young). Here recently, I ran into a little problem with 10.04 and had to re-format, but when I went to re-download it the new 10.10 was available instead. I threw it on a flash drive and installed it on my netbook only to have "problem after problem" upon installation and had downloaded and installed 10.04 from the archives in a matter of a few hours after messing with 10.10.
There were plus sides and down sides to both right off the bat. I am a nerd I suppose and I have started to play a game called Runescape. After installing 10.10, I opened up Runescape and was able to use the "Re-sizable" screen option! That's an amazing option with Runescape on a netbook. I then opened up my favorite and most used program suite called aircrack-ng. I had the apparently infamous problem titled "fixed channel mon0: -1" and was completely unable to get it working (even after reading the SOLVED article on here.) I spent probably 2 hours trying to figure out that problem and was unable to do so. I cannot be without the aircrack-ng suite so I decided to revert back as I fore mentioned.
Upon reverting back to Lucid LTS from the archives, I was happy with the smoothness of how it runs on my netbook compared to 10.10, but as soon as I logged onto that damn game Runescape, I was on a mission to figure out how to correct the "fixed channel mon0: -1" issue on 10.10 so I could have the re-sizable screen option again.
I finally figured out that I needed (from a fresh install on 10.10) to do apt-get install patch and apt-get install gcc before I could complete the steps of the SOLVED issue guide. This was never mentioned and it made me realize I still need to know what I'm doing if I'm going to run Linux and then maybe I won't have all these issues.
Out of all this, I have a couple of questions and would like to learn more about Linux so I do not have these problems in the future. Here are a couple of questions I would like to mention first: What is gcc? I had all that trouble just because I didn't know to install gcc to do the tutorial.
I believe the re-sizable screen option is available for me in 10.10 and not 10.04 because of Java. I did not have to install Java in 10.10 at all, I just opened up Runescape "out of the box". In 10.04, I use Sun Java with the apt-get command in Terminal. Does anybody have any information to confirm or deny this?
Once I got aircrack-ng working in 10.10, I was surprised to find out that it is amazingly fast compared to 10.04. I believe this has to do with drivers. I was able to use aircrack-ng (after install) "out of the box" with 10.04 so I did not download the "compat wireless" drivers that had to be used in 10.10 to get it to work.
If I were to revert back to Ubuntu 10.04 (I much prefer Lucid for my netbook, runs much better), would I theoretically be able to download a different Java and use the re-sizable option on Runescape? Would I also be able to use the "compat wireless" drivers in 10.04 to make aircrack-ng send and receive arp's and ack's so much quicker?
Last but not least, I would like some sources if possible to better learn Linux from. I mean Terminal type Linux, I do appreciate (as I said earlier) the new GUIs that are available now and I didn't have before, but I still feel the need to know my way around the system and I just don't have that knowledge.
I have a dvd that was made on windows and acidrip rips about 75% of it then stops.All others that was made on ubuntu ripped but not the one made on the windows pc.Can someone tell me how to rip it or maybe a software better then acidrip.
i installed ubuntu 9.10 for the third time on my lenovo s10e running windows xp. my first two installs went good until ubuntu tried to update gnome to the latest version and my computer went to sh grub on reboot, so on my third install of ubuntu 9.10 using wubi i turned off updates and the computer was working wonderfully for weeks until i let my netbook battery die.then the dreaded sh grub on reboot. i really like ubuntu and prefer to use it over xp.
I'm wondering about the best way to manage a dual install of Ubuntu and Windows XP.
I had Ubuntu installed on my HDD, but I wanted Windows also, so I used a live CD to partition the drive, and opened some space for a Windows partition. I installed Windows in that space. Naturally, the install set up the computer to boot directly into Windows. I want to set up GRUB to load and allow me to choose my OS on boot.
I'd like to use Super GRUB Disk to install GRUB on the MBR of the disk to allow me to choose at boot.
I HP pavillion dv2715nr with Windows 7 Professional 32 bit and Ubuntu 10.10 64-bit. I first install Windows 7 then installed Ubuntu 10.10 64 bit (grub2). And upgraded to Kubuntu. I can log on Ubuntu.
Problem: If I select Windows 7 from grub menu screen goes black and nothing happens.
So after completely giving up on linux for a year... after problems with installing grub, i reluctantly decided to give it another shot.
So I installed a new copy of kubuntu, everything worked correctly except one problem arised with my windows partition. When i try to boot windows through grub, it simply directs me back to the grub boot menu. I can boot kunbuntu fine.
I have tried recovering startup issues by using a windows 7 disc and also run bootrec.exe.
I had no problems running the command /FixMbr however /FixBoot has issues....
My partitions are as follows:
I think the problem is that grub has overwritten windows boot files so everytime i try boot windows it reverts me to grub in a sort of loop.
I installed Kubuntu 10.04-2 on a small hard drive, its in my computer along with my large hard drive which is devoted to Win XP. The Kubuntu worked fine for a while, then somehow the GRUB got transferred onto my Windows hard drive. I'd like to get the GRUB off my Windows hard drive and have that boot via its usual Windows method. I reformatted my small / Kubuntu hard drive, that did not help. In fact this made things worse, now there is no Kubuntu in my computer, so now I can't get into either Windows or Kubuntu. How can I get rid of the GRUB AND have Windows boot up normally?
MOBO: Asus p7p55d-e pro BIOS 1502 GPU: Asus GTS 450 1 Gig CPU: i7 860 8GB RAM 2 1TB HD, one dedicated to Windows 7 64bit Ultimate Connected to my LG 42" LCD TV
I asked my friend who is a contributor to ubuntu, and runs a cyber security company to install it on my computer and he said that he will charge me $375 to do this. And then he said that it is not such a difficult thing, however, it will need a lot of tinkering with ubuntu before it works flawlessly. I didn't know what he meant and didn't want to get into it with him. I was wondering if you could direct me to the threads that discuss installation of Ubuntu alongside Windows 7 already installed and on a separate hardware. I don't wanna pay him that money and I'm very new to this. Also, I hope someone could explain what kind of tinkering is done before it works flawlessly.
i've a little problem with the grub loader. I've two OS in my laptot: Ubuntu 9.10 Karmic Koala 64bit and Windows 7 64bit. But i can't boot Windows 7 from the grub loader. The grub still load the /dev/sda1 partition that is the recovery partition of the laptot, while windows 7 is in the partition /dev/sda6. I tried to modify the path in the grub.cfg, but still load the wrong partition, how i can do?
I had been dual-booting Ubuntu and Windows 7. Today I upgraded to Ubuntu 10.04 and now Grub still has a Windows 7 boot option, but when selected it goes to a blank screen and does not boot Windows 7 as it would before.
I upgraded to Ubuntu 10.04 recently and now have MBR problem. When selecting Windows XP from the GRUB menu the screen defaults to terminal mode with grub rescue> displayed. I admit I know little to nothing about Ubuntu, unix, etc other than I like what I have seen so far and am trying to learn more. I need to (unfortunately) use Windows and have data on it that I can't afford to lose. How can I repair the problem so I can boot Windows from the menu? Thank you
P.S. I was dual booting successfully earlier. I had the previous version of Ubuntu running with Win XP and everything was fine. The problem started when I upgraded to Ubuntu 10.04. I have tried reinstalling 10.04 with no success. If I am unable to get dual boot working my wish would be to save my Win data and then I can wipe clean and reinstall Win and Linux.
Yesterday I made a thread about going back to Windows as I'm giving this laptop to a friend. Anyway, after I finally got Windows to re-install I'm now stuck with "grub rescue" instead of the OS booting. Is there anyone who knows a way I can get rid of grub rescue and get Windows to boot?
I am running a dual-boot of Ubuntu 10.04 and Windows 7. My current setup uses EasyBCD to pick between Ubuntu and windows. If I pick Ubuntu, it then fires up GRUB, which then goes to Ubuntu. My question is: Can I skip GRUB altogether in the boot process? I rather suspect that it's slowing things down a lot. I've set the GRUB default OS timeout to 0, but it still boots slowly, which annoys me. way to skip GRUB entirely and use only EasyBCD for both OSes?
I have a T61 with Windows 7 and Ubuntu on it and it works great. I also have a HP Mini 5102 with Windows 7 on it. I deleted the HP_RECOVERY partition and merged with my Windows partition because you can only have four partitions. I got Ubuntu Netbook Remix on a thumb drive and I installed it by telling it I want to pick between them at boot up. However, when I boot up my netbook it just goes right into Windows, no Grub. Here is what my fdisk -l looks like.
[Code]....
how I can get Grub running on this thing would be great.
