I'd like to update my bios with it, but it seems only windows exe's are provided. Would it work if run from wine? I just ran it, and it doesn't seem to work fully. It shows a web page but with regard to my bios says "Unknown."
View 1 RepliesI tried posting this before and I'm not sure what happened but I don't think it worked, so if it did please forgive the double post.am very very new to centOS and linux in general. I just want to setup a test web server that more closely mirrors our actual web server that is hosted by rackspace. I've installed centOS and tried to setup Apache, PHP and MySQL from a guide on the web using Yum. When I go to localhost in the web browser I'm able to see the default apache page. However when I create a php page it's just blank.When I look at the apache error logs I get this: PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
I've been searching alot on the internet and I know the issue is permission related, but I don't know how to fix it. I've seen some forum posts that say you need to use the chmod 775 command on the /var/www/html folder.Currently when I do ls -l /var/www/html it returns
-rw------- 1 root root 19 May 5 13:16 index.php
-rw------- 1 root root 19 May 5 13:15 index.php~
I'm sure that this isn't correct but like I said I don't know much about how to set permissions or who the owner needs to be. I've done alot of searching and seen similar posts, but no one seems to explain it clearly.
I installed Kubuntu 10.04 last couple days ago. Yesterday I installed some package software. After reboot, I had problem to login in GUI in Kubuntu. I tried few solutions in web I found,
Now It became more worse ! After BIOS - show this error message
error : unknown filesystem
grub rescue>
I'm absolotly not sure, if I'm right here. During start I see the message "unknown (unsupported) BIOS version Acer/Aspire 6920/V1.14 , please report, aborting!"but I did not found any Mail or URI, where I can report this one. So I paste the partof the boot.msg here. Hopefully it will be on the right place. If not :
Acer-6920:/var/log # cat boot.msg |grep 8.82
<4>[ 0.038082] [<c0208056>] show_trace+0x26/0x40
<4>[ 0.185822] [<c048ef1c>] acpi_tb_load_namespace+0x6e/0x136
<4>[ 0.185827] [<c048effa>] acpi_load_tables+0x16/0x4b
[code]...
As there are few Package Management available in Fedora environment such as YUM and RPM, I would like to know how do you guys keep track of the installation and update when both are used and it appears that they have no knowledge of each others activity.
Basically, if a package is installed using YUM, the vary same package can be installed using RPM and vice-verse. I am not going into dependencies since it even gets worse! I also notice that YUM installation is carried out under a different path than RPM.
Consequently, it is possible to end up with TWO installations of the same package.If I understand correctly, YUM uses RPM for installation and it actually downloads the RPM Source files and place them in a temporary folder: That is the information I came across while I was educating myself on line and I am not sure it is correct. I personally, have looked into the said directory and I am not seeing any of the YUM installation which I have carried out.
I've been having a bad problem with X freezing up (but not the whole system), and I hate continually performing unclean shutdowns with the power button.Will an Alt+SysRq+o shut down the system in a way that doesn't cause the loss of disk buffers? Obviously, whatever hasn't been saved to the buffer will be lost, but my concern extends to the buffers themselves.ext4 and autofsck make this less of an issue, but I hate the thought of unnecessary silent corruption until the freezing stops.
View 6 Replies View Relatedi am able to try ubuntu and everything works fine until i try to install. the menu comes up to the first page where it tells you to plug in your machine and make sure there is enough disk space and network connectivity. when i hit next on this page the mouse icon changes but the next page never loads. the longest i let it hang there was 2 hours. ive tried multiple times with the same result.
im running from a flash drive on an ASUS Eee PC 1001P-PU17
10.04; 64 bit In Firefox, the size of the fonts varies greatly from site to site. Some are too small to read, others huge. Some headings and menus overlap.Screen size: 1152 x 864
My settings are:
Proportional: serif 14
Serif: Times New Roman
Sans serif: Arial
Monospace: Courier New 14
Can anyone tell me how to name Page up & Page down buttons in global-keybindings to use the custom commands with these buttons?
View 1 Replies View RelatedOn FC11 64 bit with Adobe flash plugin for Linux installed, I see segfault errors from "npviewer" in /var/log/messages. The only browser I have tried yet, Firefox, has glitches every now and then. Sometimes it shows the title of a page in a tab, but the page is blank. This can even happen when I try the Google main page. Is it true that npviewer has something to do with Adobe flash? Is there a way to fix the problem? If it is caused by Adobe flash, is there a different plugin that will replace Adobe flash player?
View 1 Replies View RelatedHow can I find page hit and page miss ratio in linux fedora core 12?
View 3 Replies View RelatedI have a problem printing to my HP printer.
What is my problem? I have a page (one page - text an graphic) to print. When I sent it to my printer it prints OK. When I sent it agian, the output is totally garbled. When I sent it again (a third time) it is OK. Sent it again (4th time) it is garbled. Sent it again ... you get the picture ;-). Alternating good and bad pages.
What is my setup? I run Fedora 14 with Cups 1.4.6. The printer is a HP Deskjet 940C. It is connected to a linksys wireless print server. It is configured in CUPS to use ipp printing. The driver I use in Cups is 'CUPS+Gutenprint v5.2.6 Simplified (color, 2-sided printing)'.
I have apache httpd server on my Fedora 10I got 2 problems:First : I copied the web page files to its Document Root <var/www/html> & Disabled the default web page. But when I visit http:/localhost ，it shows up the list of files in <var/www/html> as if a ftp server browsed in web page. So how can I set http://localhost load my default web page index.html ?Second :I want to set up a web server on Internet through my router . I applied for DDNS account & input it into router correctly . I set virtual host in server to redirect any access from port 80 to 192.168.1.2:80 in LAN . Just for in case , I also download and running the DDNS software & installed it on PC 192.168.1.2 in LAN . My DDNS provider is oray.cn . It's a Chinese server provider . I don't think there is anything wrong with oray.cn . But if you need its information just visit oray.cn (Google can translate it for you). So I want to know did I miss something to set up a web server in this kind of situation
View 2 Replies View RelatedAll has been fine with my emails but today morning when i tried to log on I got an error message "You must be logged in to access this page, go to logon page" I dont understand why even when i supply my correct user name and password.
View 2 Replies View Relatedwanted to know if i can execute commands on linux console through a web page and redirect it back to my web page !For example :if i send a query "ls"it should execute this command on my linux console and also redirect the list of the files to the web page from which i give the command !
View 8 Replies View RelatedI want to combine 4 ps(or pdf) page to single page and for this i have try a2ps command as:
a2ps -4 1.ps 2.ps 3.ps 4.ps -o outfile.ps
Event through it divide the page into four section. But only give one output of my four input. other three section is blank. Is i am doing some wrong or Is their any other command to do so.
Vim: substitute for Page Up and Page Down keys?
View 4 Replies View RelatedWhen I boot slackware, I have all the boot process that run but too fast. I don't have time to read what's running. Is there a way to to go page by page. I didn't find any key in my keyboard to stop and go.
View 16 Replies View RelatedI have a Canoscan LiDE 30 scanner which works fine in Linux. I haven't used it in months, and never since moving from Jaunty x86_64 to Fedora 11 x86_64. This evening I suddenly need to scan two pages to send to someone via e-mail, and the recipient is desperate to receive them. Naturally, Xsane has decided this is the moment to screw me.
The problem: I cannot figure out how to tell Xsane that the page size is 8.5 11. It insists on scanning only the left side, 3.99 x 11. I cannot find a page size anywhere in any of the buttons.
In Preview I once got it to scan the entire page, but could not figure out how to save the image to file. Subsequently I have not been able to figure out how I did it. In any event, scanning from the small main window always scans 3.99 x 11. Adjusting the scan area manually in the Preview window allows me to change the size area in the small main window to 8.5 x 11, but when I then scan from the small main window it reverts to 3.99 x 11.
I have scanned the document a hundred times at least, each time trying different buttons, but nothing has succeeded in getting the full page.
I am running 9.10. I have a HP Photosmart 7350 printer. I have it installed and printing. But the issue I am dealing with is that it will print a full page and then print a blank page..then a full page..then a blank page. Actually they aren't completely blank..it shows half of "2 of 6" or whatever page it is on. Like it cuts that in half and prints the 2nd half of "2 of 6" onto a separate new page.
View 2 Replies View RelatedJust got back to attempting to play with 10.04 using its Live CD. It consistently goes to the "Log In" page and not the Live CD page on running. I saw a Post specifying a F key to be pressed on boot-up to get to the desired starting point some time ago, but did not write it down. Some advice did say press Any Key but this does not seem to do the job. Tried to use the search function here but no joy. Can anyone remember which F key? Note that as a check, I tried to use 9.10 Live CD and this worked fine, so it is not a machine problem.
View 2 Replies View RelatedMany of mails sent from my mail server that are in Queue;The main reason is deffered by domains like yahoo,aol,etc.but there is one more error that i keep getting and that is Host Unknown,Below is an example from mail log,The catch is,test mail sent on the same email id sent from my personal mail from the same server i.e. url was deliveredHowever,another mail containing client information sent from customercare@mycompanysdomain ended up in queue.
There are more examples of the same,around 20 domain have the same problem.
Sep 7 14:33:46 server2 sendmail[24591]: n8793jiC024589: to=<abc@xyz.fi>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=163672, relay=xyz.fi., dsn=5.1.2, stat=Host unknown (Name server: xyz.fi.: host not found)
Sep 7 22:09:42 server2 sendmail[6407]: n87Gdffa006403: to=<abc@def-fgh.com>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=152474, relay=def-fgh.com., dsn=5.1.2, stat=Host unknown (Name server: def-fgh.com.: host not found)
I'm trying to do a test run of 10.04 LTS with a cd but the machine isn't booting from the cd ( or two other subsequent cds that I know work). I thought I remembered not having to do anything to make this boot from a cd, so either something has changed or I've flipped out. Once it boots 9.04 from the hard drive it recognizes that there is a program cd in there though. I've tried F8, F10, F12 and ESC - ESC nets me a list of drives to start from Ubuntu 9.04 and several versions of recovery mode also a command line. I'm baffled - this is probably something simple but its beyond me at this point.
View 6 Replies View RelatedI have a Dell XPS 600, and absolutely no working OS is installed on the machine. By that, I mean I have WinXP, but there's some error and when I run a normal boot it loads Windows Setup, but it "encounters" an error. Not that I care, I just want Ubuntu. So basically, I need to setup Ubuntu without first running an operating system. But my BIOS won't load it- I press F12 at startup and select "boot from onboard CD drive" but then it tells me that there's nothing to startup from, and I get stuck pressing F2 to retry. Btw, I used the regular 10.04 disk download, not the live CD.
View 9 Replies View RelatedI made a bootable usb drive that I would like to test on my sony viao laptop. I cannot seem to figure out how to get into the bios so I could set it to boot from the usb. I tried pressing F10 and F12 while booting but these were all guesses as I do not know which key combination is used to go to bios on this machine.
View 9 Replies View RelatedI have installed Ubuntu 10.10 Minimal on a 2GB USB using CLI and it is working very well after adding a few applications. But this USB will be used only on machines other than my own - likely with Windows as the only OS. And it is not comfortable for me to go into the BIOS of a strange machine to change the order of booting and afterwards go back to reset the order , especially with the owner looking on, obviously worried, and wandering whether his machine will still be working!
So my question: Is there any way to boot from a USB without having to go into the BIOS? code...
do you mount a dvd when the BIOS does even have a setting for DVD's?
View 4 Replies View RelatedSystem:Asrock X58 ExtremeIntel i7 920 w/ stock cooler, HT on6GB Gskill Pi pc16000Geforce2 MX200GB Maxtor SATALite-On DVD-RW SATAOCZ 600W ModXOS: Ubunt 9.10 x64I have the CPU set to 12x multi and 150 bclock in the BIOS, which should be 1800 mhz. However Ubuntu seems to think I still have the 20x multi on.Here is the output of /proc/cpuinfo for one of the cores (no need to see it 7 more times):
Code:
processor: 0
vendor_id: GenuineIntel
[code]....
I have a Dell Studio XPS desktop 435MT, with Ubuntu 9.1 64 bit version. There is no ps/2 port in this computer. It worked perfectly fine until yesterday I switched it on and my keyboard lights switch on, but no key pressed works from the very beginning Dell BIOS screen! I have tried to use LiveCD but keyboard doesn't work even there, so it automatically selects english and loads from cd... once it installs the livecd version and loads it, the keyboard starts working again (good thing as I recovered my data). I have also tried inserting norton ghost or other dell setup cds but don't work because a key needs to be pressed and so goes on loading grub (which doesn't work). I will try to fresh install from the terminal screen of the livecd ubuntu.
View 2 Replies View RelatedI am trying to install Ubuntu 9.10 on a laptop. The laptop does not have working cd-rom or an operating system installed. I was hoping to install via USB cd-rom. The bios is an old one and will not allow booting from USB. Does anyone know of a way for me to install?
View 2 Replies View Related