I want to enable extra visual effects on my Laptop but when I select it a windows pops up saying 'Desktop Effects could not be enabled'
explain it in dummies terms i am 14 and just learning the basics of linux
The hardware devices drivers list three different types of drivers onboard including what appears to be the latest one with accelerated graphics capability. When I try to improve the visual effects to 'extra' it keeps telling me there's an error. I've tried improving the effects with all three but still getting the error.
View 6 Replies View RelatedI recently installed Mint 8 and discovered the same problem. code...
Is there some tweeking I can do, or is this a dead horse?
I have ubuntu 9.10 I have the ATI Technologies Inc Mobility Radeon HD 3600 Series [1002:9598]video card. I dont know what it is but i want to enable extra visual effects. unfortunally a message stating "searching for drivers" appears, eventuall folowed by " Visual Effects can not be enabled" i think this is due to the drivers obviosly.
what are the drivers I need for linux (if any) for my specific video card? what do I need to do? also which video card are best fit for ubuntu/ linux? note: I dont know what it is, but originally when I first installed ubuntu I did something and the visual effects had worked had worked and up until recently i may or may not have of messed with any thing could i have of touched something
I have a problem and i hope you can help me fix this.
the problem is that when i want to enable the visual effects by system>preferences>apearance and i select the visual effects nothing happends and i get a box that says could not enable the visual effects.
soo my question is wath is wrong? do i need to download something? or can i not use it i have a integraded grhaphics card a x3100 its a dell inspiron 1525
When i try to add extra effects it says cannot enable desktop effects..and then i type compiz --replace it says
compiz (core) - Fatal: Software rendering detected.
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
Launching fallback window manager
what i have to do to enable effects..
Still new to the ubuntu world, here's my issue short and quick. Card seems to work fine until I try to change visual effects to "Extra". At that time the desktop goes black, but I can still see both bars 'top&bottom' and any windows, I am sure you know as well as i that support for the 7500 seems scarce.........
View 1 Replies View RelatedI'm currently running 10.04, when I went to go turn on visual effects it gave me a prompt to install an nVidia driver, after installation was complete it said I had to restart. When I start it up the screen flickers from being on and off, it then finally stops at being on but nothing shows up. Please help. My graphics card is nVidia G210M. Sony Vaio.
View 4 Replies View RelatedI just got a new graphics card (Well, I guess you shouldn't call it a graphics card, it's more of a workstation card) Anyway, the card is the PNY Nvidia Quadro FX 580 and I installed the proper drivers for it (Nvidia 177) But, I'm encountering a problem with enabling the visual effects.Everything was running fine and I was able to use the effects until I enabled "Xinerama" two support both my monitors. Xinerama works fine, but the Visual Effects were reverted back to "None." When I click on "Extra" it searches for graphics drivers then tells me that I should switch to the graphics driver for my on-board graphics (ATI/AMD proprietary FGLRX graphics driver).
The ironic thing is that in the description for the Nvidia 177 driver it says "If you wish to enable desktop effects, this driver is required." It does not say that on the board graphics driver. Any suggestions? I want to start feeling like an Ubuntu user again rather than a windows user.
I'm running Ubuntu 10.10 64bit on my system. Upgraded the NVidia driver to the latest one on the NVidia website: 270.41.19 to see if it corrected a problem of when VEs were enable (even Normal not Extra), I got a white or blank screen. I could tell the system was still working because I got the text info bubbles when I moved the mouse; but when I open an app or a window, the screen was blank. After updating the driver; I can see a sharper and faster rendering image but when I enable the VEs I still get the blank screen.
View 9 Replies View RelatedI am trying to do some video tutorials at [uRL] on Ubuntu Netbook Edition 10.10 this is the first edition to require desktop effects. When I install it in the VM it isn't enabled right away. when I go to enable it I ran in to the problem that I couldn't find appearance. When I opened appearance from the terminal I couldn't enable Visual effects because mutter is running. How do I drop to the base terminal and enable visual effects?
View 6 Replies View RelatedI have downloaded and installed all the required packages but still I am not able to enable the visual effects. Following are my Video Graphics Card details:-
[code]...
Whether any drivers need to be installed for this video card or ders any other thing to be done?
I was using a NVIDIA 7200GS on Ubuntu 10.04 (compiz+emerald+cairo) but it broken for over-temperature so I use my onboard graphpic intel 945G now.
I installed the intel drivers but couldnt enable Visual Effects. So I decided install Ubuntu 10.10 after that everything was Ok. I could enable Visual Effects and use compiz+emerald.
I added app x-updates [URL] and I updated my ubuntu. The kernel was updated. After that when I reboot ubuntu the visual effects was disable.
I cant enable Visual Effects on Ubuntu 10.10 with my onboard graphic card intel 945G.
When I try to enable, the ubuntu searches video drivers but It doesn't find anything. Dont understand why it searches drivers.
Some information about my problem:
Code:
a@desktop:~$ glxinfo | grep "rendering"
direct rendering: Yes
Code:
a@desktop:~$ ./compiz-check
Gathering information about your system...
[Code].....
I've just finished my new build and installed Ubuntu 10.04 LTS.I have in it an MSI N8400GS D512D3H (NVidia Geforce 8400GS) which I thought would work for Ubuntu. After installing Ubuntu the visual effects are disabled, can't even get "Normal" settings in the Appearance dialogue. Updates have all been installed. Apt has been updated. "Hardware Drivers" screen draws a blank. No proprietary drivers listed at all. First time I've actually used a Graphics Card in an Ubuntu install.
View 6 Replies View RelatedI have just installed ubuntu 11.01 and I'd like to enable the visual effects. I have a touchsmart 600 Running this:
Code:
lspci | grep VGA
Results on this:
Code:
jaya@jaya-ubuntu:~$ lspci | grep VGA
03:00.0 VGA compatible controller: nVidia Corporation C79 [GeForce 9300] (rev b1)
and running this:
Code:
/usr/lib/nux/unity_support_test -p
Results on this:
Code:
jaya@jaya-ubuntu:~$ /usr/lib/nux/unity_support_test -p
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce G200/PCI/SSE2
OpenGL version string: 3.3.0 NVIDIA 270.41.06
[code]....
I recently migrated from windows to linux .i installed ubuntu 9.10 on my 32 bit system i faced this pblm .when i tried to enable visual effects
error occurs and it says 'visual effects cant be enabled.i tried this
System->Administration->Hardware Drivers.But window appeared saying ''no proprietary drivers are in use on this system''..If i have to install them what i need to do .
my graphic card info is as code...
I have Lucid lynx on my laptop, its been working perfectly for months. Recently been trying to get flash videos on sites to play and came across a 'fix' that said to disable desktop effects, which I did.
That didn't work and afterward found out that adobe flash 10 don't work on 64-bit linux, which is what I have. Tried to re-enable desktop effects to normal but got "cannot load desktop effects" popup.
I've removed nvidia driver, reinstall it, tried to enable desktop effects, didn't work. Ran nvidia-settings which said to run as root nvidia-xconfig and restart X(alt-printscr-k), which I did, it didn't work. I just want my desktop effects back, I had it on extra.
Edit: Forgot to mention that at boot, after grub menu nothing shows. No login screen. I have to add "nomodeset" by pressing e at boot menu and typing it to the boot options to get a dialog to choose restart x which then shows the login screen.
Update: I've been searching all over, tried to install by downloading from nvidia site, didn't work, been rebooting like crazy after every try. Installed a bunch of nvidia files from software center and got hardware drivers to have nvidia current. The driver is activated and in use. However I still can't enable desktop effects and ubuntu doesn't boot normally. After the grub menu it shows the logo for a second then blank screen. I have to boot with nomodeset and choose to restart x or start in low graphics mode.
Please help me fix this.
- HP Pavilion dv2000- 9.10 just installed (not updated from 9.04) and updated- kernel 2.6.31-20-generic- direct rendering: Yes- Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)I can't use any visual effect but I was using "Extra" visual effects with 9.04, same laptop.How is that possible? How can I enjoy visual effects again?
View 3 Replies View RelatedI'm running Karmic on an Acer Aspire AO751h and very aware of the issues regarding the GMA500 ans psb drivers, and after reading all the forums I've finally accomplished to make it work just fine. Last week it performed an update via the update manager and since then I haven't been able to restore/run any of the compiz settings and found out that the problem is that it doesn't let me turn on my visual effects under the appearance settings. When I attempt to set them as normal or extra, it starts "searching for available drivers" then the screen blinks several times, goes black, hides every window and just shows me my desktop background and then come back again and displays "Desktop effects could not be enabled". As I mentioned before, Compiz was running fine and I had no issues with the visual effects prior to the last update perfomed a week ago. Can you help me please?? If you need further information I'll be more than glad to provide them tou you, this is driving me nuts!
View 2 Replies View RelatedI just downloaded and installed the latest version of Ubuntu on my laptop. After installing the drivers for the visual effects I restarted the computer, and now after the all black screen with the little white Ubuntu symbol in the middle the screen goes blank, lots of horizontal lines appear and it contrasts out to a completely blank, white, useless screen. Any suggestions? EDIT: laptop is a Toshiba 5105, bumped up to 1.2gb of RAM
View 5 Replies View RelatedI have new hardware and I'm doing a dual boot, hoping that Ubuntu will be my primary OS, but I'm having trouble ringing it out. I installed Ultimate Edition 2.6.1 and in the past with an old machine I could turn on visual effects. With this machine, when I try to, it says it's looking for a driver, blinks a bit and then comes back with a message saying "Desktop visual effects cannot be enabled."
I assume that I don't have the nVidia driver loaded. When I go to Hardware Drivers, it says "No proprietary drivers are in use on this system." In synaptic, the latest driver does not show up. I followed the instructions on this site that someone put up which required adding some lines to the "Blacklist" then purging old drivers. It said to expect an error and what to do then, but I never got the error. When I tried to do the rest of the commands anyway, nothing seemed to happen. One of the steps was to download the latest driver, which I did. It was a .run file...........
Took my laptop into the computer shop for a format and asked what they thought of Linux etc, they suggested i tried Ubuntu and installed it for me.Ive been searching around trying to get past the fact that my graphics card is black listed so i can enable effects but am having no luck, im not to worried about flashy effects like the cube but i would like to tidy up my desktop as it is very cluttered with the original setup im not sure how to post a screen shot but all the icons are very big and un-appealing.would love to simplify it all and maybe have the window navigator along the bottom.Im not to confident with using the Terminal, but have had a go at Compiz-Check etc and some random commands.
View 9 Replies View RelatedI've got an ati x1270 in my laptop and removed the fglxr driver and now I can't enable desktop effects and the preinstalled driver clearly isn't working and I don't really want to reinstall ubuntu AGAIN. I'm getting tired of it. I wouldn't have removed the driver except that I think it was effecting my booting because I was booting to a blank screen (and it wasn't my ram)
View 4 Replies View RelatedI just installed Fedora 11, and am trying to install my video card drivers. I have an Nvidia geforce gtx 260m. So far I have installed both the kmod-nvidia and akmod-nvidia packages, and I still cannot enable desktop effects. After i installed the akmod package, I sometimes see the nvidia logo for a split second when I log out, but my drivers are still not correctly installed.
View 9 Replies View RelatedCan't enable 3d effects on lucid lynx even if restricted nvidia driver (v195.36.24) is installed and activated. Actually 3D effects were working with compiz etc, but at a given moment -not sure if after the final release of the 10.04 - they stopped working, and now it always fails to enable them.
View 1 Replies View Relatedim using the ubuntu distro and when i goto the visual effects tab and click on normal or extra, it says "desktop effects could not be enabled" also, i have Two hdd's, a 100GB that has windows 7 and ubuntu. and a 250GB that has Windows XP. GRUB didnt notice windows xp though, so its not a boot option.
View 5 Replies View RelatedI've enjoyed accelerated 3d graphics for years with this laptop, but since moving from CentOS 5.3 to FC12 I have had no 3d or opengl working at all.My install seems good. I'm running right now with the 'nvidia' driver in 1920x1200 res with no real problems except the lack of 3d. I have just finished trawling the forums again, coming back to: F12,F11 & F10 Nvidia driver guides [URL] I uninstalled all my nvidia packages, re-installed only "kmod-nvidia xorg-x11-drv-nvidia-libs.i686" and dependencies, ensured 'nvidia' was my selected driver in xorg.conf (using nvidia-config-display disable, then enable), and rebooted, and still no joy. No errors in Xorg.0.log. My 'glx' extension is loaded. 'nouveau' is rdblacklisted. SELinux is disabled. I have 3Gb RAM and so have chosen not to use the PAE kernel or modules.
Code:
[neek@uberneek ~]$ glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig
[code]....
I like the Visual Effects tab feature. I noticed that is gone from Ubuntu 11.04 and subsequently from distros based on it such as Linux Mint 11.The image attached is of Ubuntu 10.10. How would I get the None and Normal effect settings in Ubuntu 11.04Linux Mint 11?
View 5 Replies View Relatedjust now upgraded to GNOME 3.i have some problems with GNOME3.my first problem with GNOME 3 is i can't enable desktop effects.i don't know how to add widgets to the panel.see the above image i am also want to add openSUSE geecko in the place of activities.Malcolm where are you?not only Malcolm anybody whom using GNOME 3
View 9 Replies View RelatedI am having a bad slowdown issue when I enable Visual Effects with the Ati proprietary drivers that come with the installation. Everything runs very slow maximizing and minimizing take about 3-5 seconds per click and the effects get all choppy and don't look right like they did on my x1950 video card. I have tried downloading the current drivers from the ATI site but they don't seem to be initialising correctly after I perform the install.
I also know that the graphics card is not the culprit as it works perfectly fine on my Windows 7 64 bit install. There is no reason that my video card cannot handle the Visual Effects as it is a 1GB 4890 should have more than enough horsepower.
My machine is:
AMD Phenom II 965 Black Edition
8 GB G. Skill 1600 DDR3 Memory
1 TB Western Digital Caviar hard drive
1 GB 4890 Graphics Card ATI.