Ubuntu :: System Preference Monitor And It Says Unknown And None Of The Opetions There Are Available?
Jun 13, 2011
recently found a post that had the same plymouth booting to text only issue i was having so i folowed the instructions and loaded the script.when it got to the resolution part i put in 800x600 24bit as i have a acer netbook and i think the default is to large,when i rebooted my plymouth came up yaaaa prob solved but the plymouth was very wide and poor quality,also before the pymouth the screen turned pixely and when the desktop came on it was very poor qualilty,i went to system preference monitor and it says unknown and none of the opetions there are available to me,i used terminal and tryped x{somthing} for checking minimum and maximum and it said failed to load.what can i try,the resolution now is ugly and wayyyyyyy to big for my little netbook.
View 5 Replies
ADVERTISEMENT
Oct 16, 2009
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
View 5 Replies
View Related
Apr 20, 2010
I am now using Ubuntu 9.10. The prob is I am not able to increase the resolution of display. It is showing only 800 x 600 display. While trying to increase the resolution it is showing "Unknown Monitor". So, how can I detect the monitor so I can increase the resolution of my system.
View 3 Replies
View Related
Jan 27, 2011
I just installed Ubuntu 10.10 on my Dell Latitude D430 that I use at work. I have it on my desk docked going to a Dell LCD Monitor. When I go into the monitor set up it says Unknown for the monitor and Laptop for the actual laptop display. Also, I have very low resolutions for the "Unknown" monitor.
I am trying to resolved this issue so that I have better resolutions on the external monitor and then I can try to extend the desktop between 2 screens.
I found something online about adding the intel PPA and I did that, but now what. There is no xorg.conf that I can find for 10.10.
View 7 Replies
View Related
Mar 18, 2010
I gave up on ubuntu few months ago and now I'm giving it one more chance since I am already sick of Vista. Okay, I researched all over google for specific problem and I think there are few possible problems such as not recognizing Monitor (Polaroid 1911-TLXB) or missing driver (Intel 82G33/G31). I have DELL Inspiron 530. Im stuck with 800x600. I did try SYSTEM>ADMINISTRATION>Hardware Drivers and it searched and found NOTHING.
View 9 Replies
View Related
Aug 14, 2010
I installed Ubuntu 9.10 on an old PC, Dell dimension L550r, PIII500, 512M ram. There is a problem that monitor is not detected. I could logon as 'xterm' type, but the window size is only 1/4 of screen. When I logon as 'GNOME', it seems screen is not refreshed. media player window is blank, but can see a static image if minimize and restore window. Even terminal window is blank.
Go to "System"->"Preference"->"Display", shows "monitor unknown".
I can not find file /etc/X11/xorg.conf, is this normal?
xrandr command output:
Screen 0: minimum 640x400, current 1024x768, maximum 1024x768
default connected 1024x768+0+0 0mm x0mm
1024x768 60.0* 75.0 70
832x624 75.0
.....
View 9 Replies
View Related
Aug 19, 2010
Mine is, ever since I installed the (wrong) opensource video driver for my Ubuntu 9.04 & Lenovo ThinkPad T41 (the one model, imho, they should never have let out the door!), uninstalled it by far-less-than-recommended means (ie, I used Synaptic and sudo apt-get remove and apt-get purge). End up is now my screen has a max resolution of 800 x 600, and Display panel insists that this laptop's screen is an "Unknown" Monitor.
Any tweaks to /etc/X11/xorg.conf (adding vertical refresh and horizontal sync rates for example) has resulted in its own weird behavior. On having my password accepted at login, there's a half-second of white that "rolls" over the screen horizontally. The next thing I see is a diagonal broken streak of white about 2 1/2" down from the top of the screen and 3 inches in from the right-hand side. The next thing I see is a buzzed,jagged rendition of my normal desktop. Nothing at all is clear, and the jags seem to redouble themselves the further one scans down on the screen. The only thing one can do in this situation, and I've done so enough times to know, is a hard reboot (power button for ten seconds or however long it takes).
And as I don't rate sh*t for a shilling on the Ubuntu forums, and as Google has been worse than useless every time I search for problems as detailled as these (it's like K-Mart: it has what you want until you go to look for it!), and as my one self-styled "Lunix-Geek" friend (now in the UK) has only briefly battled the xserver-xorg beasts, I'm coming here to see if anyone knows something else I could do besides bite the bullet, say goodby to my accumulated goodies, and reinstall Ubuntu.
View 4 Replies
View Related
Dec 4, 2010
I have a new Television that is connected to a computer running Ubuntu 10.04 with a VGA cable. It works, but the only resolutions I can use are 1024x768, 800x600 and many lower ones. Since the resolutions are 4:3 and the television is not, there are big black areas on the side. I can chose format - wide screen on the television, but then the proportions are wrong. And when I play a movie, it's usually very small with big black areas on the edges.
I got rid of these drivers, I'd used them if they'd work, but they just made matters worse.Any ideas what to do? Maybe upgrading to 10.10 would help? But I'd prefer to stick with the LTS versions if possible.
View 3 Replies
View Related
Aug 21, 2010
I installed 10.04 on new computer for office, got everything working great at home with old 15" monitor, took to office hooked up to Multisync 97f monitor, and not recognized 640x480 is best. I Have onboard Geforce 6150se/ 430 and have the newest driver installed from Nvidia 256.44. I tried to install everything that said multisync in synaptics but screen jumps around when trying to click on anything because it don't fit right.
View 5 Replies
View Related
Dec 31, 2010
I have an acer aspire one netbook and in display properties it says the monitor is unknown. The trouble is that the screen is widescreen (16:9) but it has it as (4:3)so the screen is sort of stretched. Is the a terminal command as another way round this or how can i get the screen recognised?
View 4 Replies
View Related
Jun 3, 2011
I'm trying to upgrade my sister to natty, but it wont boot properly unless I use nomodeset. It didn't need this in maverick, and she doesn't need any proprietary drivers, as she only has onboard laptop graphics (intel mobile 4 series I think..) So when I boot it into the LiveCD the resolution is wrong, so I go into system > preferences > monitors but it wont let me change the resolution as the monitor is listed as "Unknown" I also tried LinuxMint 11 (Katya) but it was the same (it is based on ubuntu anyways so it's not surprising.)
View 9 Replies
View Related
Nov 19, 2009
I have never used Linux always windows so heres the problem the display only has 2 settings 640x480 and a smaller one and it say unknown monitor. I installed the drivers in hardware driver in systems I'm running Ubuntu v 9.10 if that matters and the video card is a Nvida mx440.
View 1 Replies
View Related
Oct 25, 2009
I am using Ubuntu Server and would like to recieve an email once a day listing mac address's that have requested an ip address that are not in my list of known mac address's.
lookup=`grep $mac /root/dhcp.macs`
#This does not work as the first entry mac1 will be okay but mac2 and mac3 will not
#It will try to use mac2 as the file to look in which won't exist
#I need to make it loop through for each line of the variable and add that to the lookup value diff $mac $lookup
#I think this should differentiate known from unknown if i can get a lookup value
View 5 Replies
View Related
Feb 23, 2010
I have persistent video tearing my second monitor (Mitsubushi HDTV). I have tried everything that was suggested with some improvement. I have no issue with tearing if I add the following to my xorg.conf
Quote:
Section "Extensions"
Option "Composite" "Disable"
EndSection
Is it possible to disable composite for one monitor only and keep it for the other. Or at lease is it possible to have compiz for one monitor only and disable it for the other.
View 2 Replies
View Related
Feb 16, 2010
I've just installed OpenSUSE 11.2 on a new machine. Because I was still using another machine as my main box while building the new one, the monitor attached when it was installed has a resolution of 1280x1024 @ 77Hz. I've now moved it to be my main machine and the monitor is a widescreen 1680x1050 @ 60Hz model. When I boot it normally the screen fails to come up - even GDM doesn't show. If I boot in failsafe mode the system comes up fine, but in 1280x1024 mode. The 'Configure display settings' icon shows the monitor as 'Unknown'. Couple of things I tried:
1) Switched to runlevel 2 and logged in as root. Ran Xorg -configure and looked at the xorg.conf.new that was installed, but it just had generic info for the monitor:
[code]....
2) While still in runlevel 2 and logged in as root I did a startx. This brought up the X display in 1680x1050 ok, and clicking on the 'Configure display settings' icon showed it had correctly identified my monitor and had set the size and frequency correctly.
3) Given the results of (2), I then tried logging in as myself in runlevel 2, did startx again, but this time the display failed to come up again.
View 7 Replies
View Related
Mar 9, 2010
I installed the nvidia proprietary drivers with click-install and everything perfect, I have desktop effects working but the problem is that when you open the config. screen settings to make sure everything was really good, I get to screen unknown April.
The maximum resolution is the correct 1440 * 900 for 19 "but the refresh rate by not recognizing the monitor down to 50hz me and gives me the option to 60hz as it was before installing the nvidia drivers.
How can I fix the display settings?
View 6 Replies
View Related
May 27, 2011
I have done a scratch install of Ubuntu 11.04 (Natty) successfully today. I am facing problem while adjusting my monitor resolution.
My motherboard is pretty old, Kobian 845GLNDSMx. When I tried to adjust the resolution from Preferences -> Monitors, the resolution is shown as 800x600 (4:3), Refresh Rate - 0Hz and Rotaion as normal. "Monitor Unknown" is highlighted on the window. Moreover, "Detect Monitors" doesn't work.
View 9 Replies
View Related
Jun 18, 2011
I am new to Ubuntu. I installed Ubuntu 8.04 and it detected my Acer monitor AL1716 correctly and it works fine. However when I installed Ubuntu 11.04 it shows the monitor as " Unknown Monitor" and the maximum resolution is 1024x768 and I cannot set the native resolution which is much higher. My motherboard has Intel 845G chipset and built in graphics. I tried Ubuntu Software Center, but couldnot solve the problem.
View 4 Replies
View Related
May 13, 2011
I have the following error : unknown filesystem. grub rescue after incorrect dual boot with Windows 7. - i was so stupid to install Linux and windows 7 on the same partition ....I did some investigation i found online that i should continue with supergrub disk
Steps i have taken first i installed rescatux iso on dvd then cd then usb changed BIOS offcourse to boot from these locations. Then i tried SuperGrub disk 2 did exactly the same but still i am not able to recover anything then i tried supergrub disk 1 all over again dvd cd rom and usb but i don t get the option to recover windows bootloaders After that i was able to start my pc with the ubuntu run from USB
Is there anybody who any tips where to start now i really need my windows for workrelated stuff the usb version gives me the option to fully install UBUNTU. If i do this do i then overwrite my windows 7 partition again?
View 1 Replies
View Related
Jul 31, 2010
I've been having issues where I am running out of video memory on my ATI Mobility Radeon 5470 (latest Catalyst), and I would like to be able to examine what is going on with it.How can I monitor my video memory like how I can monitor my CPU and RAM with top or system monitor?
View 2 Replies
View Related
Apr 3, 2011
In System Monitor, on the File Systems tab, the "Total", "Available" and "Used" columns don't seem to add up, and the "Used" percentage doesn't seem correct either.
My config:
/dev/sda1 = 80 GB SSD drive, / partition.
/dev/sdb1 = 50 GB FAT32 partition of an external 500 GB USB hard disk.
/dev/sdb2 = remainder of the 500 GB USB hard disk encrypted using luks.
Screenshot: The /dev/sda1 figures don't really add up well, but they're close at least (how you get "50% Used" from any of those figures I don't know!).
However, for /dev/sdb2, they're miles off:
"Free" = 146.2 GiB
"Total" = 409.7 GiB
"Available" = 125.4 GiB
"Used" = 263.5 GiB
[Code]...
View 4 Replies
View Related
Jan 18, 2011
I have a 58 mg PDF that needs to be sent to a person with Windows. I do not know what special software they have. I only know that I nust send them the file in a way that they can use it. I tried yousendit.com and it tells me I need to install their "yousendit express package". But apperantly it will not run on Linux.
View 9 Replies
View Related
Sep 29, 2010
i installed ubuntu 10.04.. all very nice, but not the os for me.. lightscribe problems, front ir panel problems. minor niggles for sure, but enough for me to go ahead with formatting and installing windows. simple job...or so i thought... using windows set up, i formatted c: and continued with install...on first restart i got a grub error saying unknown file system... i have tried loads of different things... fix mbr fixboot, that nt60 one. dban wouldnt work either.. im at my wits end ive spunked the best part of 1000 on this system and my wife is nagging me.
View 4 Replies
View Related
Jan 17, 2010
I have updated my linux version 5.2 yo 5.3 after that I wanted to mount my windows drives. I installed this rpm kernel-module-ntfs-2.6.18-92.el5-2.1.27-0.rr.10.11.i686.rpm (99KB) its not working while um giving this command #mount -t ntfs /dev/sda5 /mnt shows a error unknown file system NTFS. bt it worked in 5.2.
View 3 Replies
View Related
Apr 4, 2016
Happens on Jessie AMD64 with mate, I can't go to a tty to kill mate system monitor, mouse stop working, keyboard stop working. I tried changing the theme, and now it freeze opening mate system monitor.
View 0 Replies
View Related
Apr 15, 2011
I previously had Ubuntu installed on my MBR. I deleted that partition (32 GB), resized my Mac partition back up to (250 GB), and then reduced it to 200 GB and created a new one with 50 GB via BootCamp to install Windows 7 from a DVD that I burnt (I got a Windows executable from MSDNAA that I used with Wine to obtain the ISO image. Insert rant about having to download Windows with a Windows executable here.).
I've tried burning two different DVDs. I used Burn on my Mac to burn a data DVD+R with the HFS+ and Joliet filesystems (I think) and then tried again with the ISO9660 and UDF filesystems. The latter has not shown any signs of working besides mounting on OS X. The first DVD would not boot whenever I held 'C' down at time of boot. So I went into BootCamp and clicked "Start Installation". It restarted my computer and this is where the real confusion comes up. I think that it tried booting via the empty partition. The reason I say this is that there are remnants of GRUB and when I boot, I get a screen that says this: error: unknown filesystemrub rescue>
View 1 Replies
View Related
Jul 18, 2011
I have a pc that was running with the latest version of ubuntu and i wanted to install just vista for somereasons.
And what i did is to format the main driver and try to boot it from vista CD and as you may guess i have an error that says: unknown file system grub rescue
Each time i start the pc. I have an ubuntu live cd and also the vista cd, so what should i do now? the vista cd dosnt boot and the same screen appears all the time.
View 5 Replies
View Related
Aug 3, 2010
I installed Ubuntu 9.10 and my sound does not work. Whenever I go to the Sound page and the Hardware tab to try switching from HDMI to Analog Stereo Duplex, whenever I select it and close the sound page, it never saves the switch. Whenever I open it again, the audio is right back to HDMI again. I don't see any "Apply Change" button or anything
View 1 Replies
View Related
Jun 11, 2010
Cannot write to preference file "matlab.prf" in "/home/jiangmi/.matlab/R2010a".Check file permissions.every time i run matlab by typing matlab in the terminal,i see this error messagei can run some m files, but i can not use ctrl+A to copy, etc.when i view the permission, i find below:
jiangmi@jiangmi-laptop:~/.matlab/R2010a$ ls -rl
total 1368
-rw-r--r-- 1 root root 1265183 2010-06-05 20:04 toolbox_cache-7.10.0-2356054188-glnx86.xml
[code]...
View 1 Replies
View Related
Jan 19, 2011
I was consulted to find those "preference for encryption" in system or "accessoires" in applicaton to change the password for network. but I don't have them both in the menu. I am totally blocked with different passwords for the session and the network.
View 7 Replies
View Related
