how do I go about using rsync or grsync to sync folders to a samba share in my storage router? the samba share ip is smb://192.168.0.1/usb1-c/ tried using grsync but it says cant find smb!
View 9 RepliesOK, here is the test code I am using: rsync -acrv /home/randy/Documents /media/USB2/testbackup. What should I put in the code so that when I delete something in the Documents folder, it will also be deleted in the testbackup folder when I perform a sync.
How can I have it so the code will check if USB2 is available, if it is, do the sync, if not, do nothing.
I need a program to run on Ubuntu that must be easily set up to do a series of different cloning operations at specific times between the USB drives on a single Ubunu pc, depending on the day of the week." So on Monday folder B is forced to match folder A, Tuesday C forced to equal D ... and on Sunday a whole bunch of these clonings happen. This must all run unattended (at 2am) and be robust with no "what do you want to do next messages" or having the whole thing give up if there is a problem with one file. Though I do need a log of success or failure. Windows programs that do this stuff are FolderClone and GoodSync. I looked at Unison and Rsync and one or two others, but none appeared set up to do what I need, or to be excessively complex / general. I don't need something that can sync two copies, or over internet ....
View 5 Replies View RelatedI want to use rsync to synchronize some folders on my LAN. I have this working with two scripts; one runs at the beginning of my work session and gets the latest directory tree from the server, and the other runs at the end of the session to put any local changes back on the server. My "get" script looks something like this:
Code:
rsync -avuzb --backup-dir=/home/user/rsync_backup_dir --delete my_server:/home/bak/common_data/ /home/user/data
This works well, and with the "b" option any file that has been deleted from the master directory tree on the server will be deleted from the local machine and moved to the local backup directory. This is a safety measure to prevent the loss of files through a mistake (on my part).
The problem is the "put" script:
Code:
rsync -avuzb --backup-dir=/home/user/rsync_backup_dir --delete /home/user/data/ my_server:/home/bak/common_data
I want to run both scripts from the local machine, but the "put" script will not save deleted files to a backup directory. I tried using a remote backup directory like "my_server:/home/user/rsync_backup_dir" but this did not work. Is there a way to backup files deleted from a remote server from an rsync script run locally?
I try to sync two directories using rsync.
the source is on Linux, and the other is on windows.
So, I mount the directory on windows using the command mount -t cifs . in Linux system.
Then I execute rsync ....
Everything is OK, but rsync prints out
rsync: chown "/mnt/windows/A/." failed: Permission denied (13)
rsync: chown "/mnt/windows/A/readme.txt" failed: Permission denied (13)
I want to sync the directories without changing ownership.
wrote a script to sync my netbook music with my server music and everything was fine.but if for some reason lets say i run it accidently and i'm not connected to my network, i just wiped my netbook music .here's what i got so far:
Code:
Sudo mkdir /media/ServerMusic/
mount -t cifs -o user=Justin,password=****** //192.168.1.108/Public-3/Music/ /media/ServerMusic/[code]....
i need to have the --delete option in rsync (say i sync it and realize i hate some music, when i delete it from the server i don't want it still on the netbook.i want an if statement in here somehow, but i'm not sure how to do it.something like, the first command in the script should be a ping test, if ping doesn't work end the script, if ping does work continue or if the server music gets mounted to the created directory continue, if the mount failed, or even in the mounted folder is empty stop the script
what can i do here to ensure i can keep the --delete and not have to worry about losing my music if the mount fails?
My linux system is running from the ram (ramfs/tmpfs). Crated a partition type 'tmpfs'. Processes are reading/ writing from/to this partition files. I am looking for utilities to sync this partition to the remote storage regularly (say, once in 10 sec). Normal copy command will produce partial files, if the copy is getting executed during a write operation.
View 2 Replies View RelatedI have two linux box that i would like to keep in sync. I see option -avz syncs the remote with local but new local files are not pushed.
View 2 Replies View RelatedCan anybody tell me how I can synchronise files between two computers in a network that have been modified or created within the last 60 days?
View 3 Replies View RelatedI'm looking for a way to sync directories between two computers, in a "two-way" fashion. Basically, I have a laptop and I have a desktop, and I want to keep a particular directory synced between the two machines. The easiest thing would be to have some kind of networked filesystem, but obviously this won't work because the laptop may or may not be connected to the internet at any moment. At any time I might be editing files on the desktop or on the laptop, and when the laptop is connected to the internet, I'd like all files on both machines to be synced to their most recent versions.
I thought I could do this with rsync but now that I've looked into a bit more it seems like it works only for "one-way" syncing. In other words files are synced from a server to a client or vice versa, but not both at once. First of all, am I right about that? And second, is there a program that will do what I want to do? OK, I guess you could do it with some SVN kind of thing but that seems like overkill. I guess if there's nothing out there it shouldn't be too hard to write a script myself to do it.
I am using a Belkin F5D 8235-4 ver 2 wireless router. My linux box is connected direct. I have a 16G flash drive installed in the usb port on the router that I want to use for storage so I can dump files I share with my other machines on the network. Windows sees this usb and works fine by just using the web browser and using 192.168.2.1usb no problem. Then I try to use my unbuntu and can not for the life of me figure out how to set up a permanent link to that drive in linux. I would like to have a direct connection on my desktop. Of course I tried Belkin and was told we do not support Linux.
View 4 Replies View RelatedEver since I had a hard drive that had an unexpected mechanical failure 2 years ago (& had to pay $1400 to have the drive pulled apart in a vacuum & copied), I've been understandably paranoid about ensuring I keep multiple up-to-date copies of my hard drive.Currently, I'm running 3 computers- The TV Computer, my Wife's Computer & my Main Computer. A second hard drive in the Main Computer & an external hard drive both act solely as backups for my Home folder. The TV Computer & my Wife's Computer also keep an identical Home Folder to my Main.I have ssh installed on all computer's & have made bookmarks via the Places Menu's 'Connect to Server', so obviously it's very easy for me to exchange files between computer's...
My problem is this; Every time I save/download/change a file, I have to copy it to 4 other hard drive's. It's kind of annoying.Can anyone suggest some ways for me to save some time with this? It's a wired network with static ip's. All 3 computers are pretty much turned on 24/7.I'm open to middle-of-the-night scheduled type of thing or whatever.
how do I select just three folders to sync from a directory?
View 8 Replies View RelatedIs it possible to have all my Hotmail folders be synched with my Evolution? (by default it is only synch-ing Inbox)
I've searched these forums and seen this question raised by many but no clear answer on it yet...
I'm using a Linux machine at work, and started using at home in a VM for some home development. I have a vimrc and a bashrc with some configuration, that are useful for both machines. What is the best way to sync them? Create a symlink for each file in my home folder pointing out to a the respectives files in my Dropbox sync folder? Is this possible (delete .bashrc and create a symlink instead)?
View 4 Replies View RelatedI want to synchronize my home folder from my laptop to my desktop from the local network, but i want to transfer only the visible folders/files... So i am using the following command
Code:
rsync -v-r-e --delete ssh ~/* kokeroulis-desktop@ip_address:~/
The command is transferring the files but it doesn't remove the old folders which they doesn't exist any more.
I must use have my time configured for my VPN to work? I have an NTP configured also but can't just place what seems to be wrong that my routers in different locations doesn't all synchronize with my vpn server.
View 1 Replies View RelatedI've got two primary computers, one Mac Pro and one MacBook Pro for when I'm on the go. I've also got a Linux sever which also acts as NAS. Currently I backup the entire computers to an external drive with Time Machine which is rather useless and doesn't sync anything. What I really want to do is to keep my important files synced between both computers and my NAS (which is running RAID 5), that way I'm not backing up easily replaceable systemfiles and I've got all my important files in 3 places where two of them are running raid so at least 5 drives would have to crash at the same time before actual data loss occur.
Folders I want to keep synced is basically my photo, documents, development, mamp and work folders and then I want to keep the user library folder backed up but not synced. I'm thinking that I'd have to use rsync but don't know how. Before suggesting Dropbox and similar suggestions I don't want to use them because of several reasons some of them being security (Dropbox obviously proved this), Speed (sometimes I'll sync gigabytes of data and that will be significantly faster locally and probably even through VPN as I have a Gigabit pipe), Space (space on my NAS is cheap and only practically limited by my needs), reliability (even if my internet were to go down I still need to be able to keep my files synced incase I'd need to go somewhere on the fly), price (I already have all the hardware and for the amount of gigabytes and bandwidth I'd need I doubt that there's any free or cheap service). Those are my main reason for wanting to keep it locally.
I am trying to create a simple bash script to rsync some folders within a directory stucture. I am using wild cards, in the rsync source directory structure, but my command always fails. I believe it is the way I am using wild cards within my for loop. Here is my command ;
Code:
for seq in `cat test.txt` ; do rsync -nvP /folder/folder/folder/folder/folder/**/$seq /folder/folder/folder/ ; done This always fails, where if I do a ls to the destination, to test the path, it always works.
Is there a way I can set a storage quota for samba shares, so that way a user can only store up to 2gb of data in a certain share?
View 4 Replies View RelatedWe have set up a dedicated server with Centos5.4(Kernel 2.6.18-164.el5PAE). In this we have mounted a external storage device above 1 Tb. And also we have shared this storage device in samba share.
Sometime when we access this large storage in windows machine the server hangs and we were pushed to restart the server. Past few days it often happens. How to break down this issue and is there some thing that we have to look in specific area to avoid this?
What I want is to use the systems account as the samba accounts.In school we have a project to simulate some sort of corporation with different platforms. I've created a map called shared and for authentication the users should only need to be a member of the group employees. (force group = groupname in smb.conf right?) Now, I don't want to create the users with smbpasswd -a because there is alot of accounts and the users should be able to choose their own passwords. So, is it possible to sync the system accounts with samba and only use group as authentication?
View 2 Replies View RelatedI need to know is there any way to record or tracking or make logging if when user samba delete files or folders i can know that, cause sometimeon samba server some users complain they lost files, though i have daily backup and i can restore their files, i just want to know if or maybe some other users in one group accidentally move or delete the files.
View 1 Replies View RelatedI've got a hybrid network of Windoz and Mac clients that I want to auth to a CentOS Samba server (currently running a tdbsam backend but will eventually be migrated to an OpenLDAP backend)...what is the best solution for "sync'ing" the Mac clients (mostly laptops) to the server, all the solutions that I've seen suggest that I should simply map the users home drive to the PDC but that doesn't mac much since to me seeing as they need to access their computers data while they're off site...is there a way to "sync" user profiles in Linux>?
View 1 Replies View RelatedI'd like for the server (10.04) to keep samba passwords and unix passwords "in sync"; i.e. when a user changes his unix password (via passwd), his Samba password is automatically changed to match the unix password. Similarly, when a user changes his samba password (via smbpasswd), then his unix password is changed to match. smb.conf seems to make provision for this; following are the applicable entries from my smb.conf:
Code:
obey pam restrictions = Yes
pam password change = Yes
[code]....
I've got a hybrid network of Windoz and Mac clients that I want to auth to a CentOS Samba server (currently running a tdbsam backend but will eventually be migrated to an OpenLDAP backend)...what is the best solution for "sync'ing" the Mac clients (mostly laptops) to the server, all the solutions that I've seen suggest that I should simply map the users home drive to the PDC but that doesn't mac much since to me seeing as they need to access their computers data while they're off site...is there a way to "sync" user profiles in Linux>?
View 1 Replies View RelatedI setup openldap and samba on 9.10. The ubuntu desktop client gets authenticated successfully with the server.
But when I do a passwd on the client, only the ldap passwd is getting changed but not in the samba and the unix user account.
My smb.conf
Code:
passdb backend = ldapsam:ldap://192.168.3.100
ldap suffix = dc=example,dc=local
ldap user suffix = ou=People
ldap group suffix = ou=Groups
[Code]....
Have an issue with my CentOS server. I have a fully updated Centos 5.5 server and I have samba set up to serve shares to a couple of groups in my home office. I have it set up to force user/group and force directory create mode 770 and force file mode of 770. This set up works perfectly well for normal connections to the server; no matter who connects, all files and directories are owned by the specified users/group and create modes I specify. The problem is when I try to rsync some files to the same shares. When I do this, rsync ignores the directory/file forced create mode. It will honor the user/group, however. As an example, if I create a directory on one machine connected to the samba share, I get the following:
drwxr-x--- 3 nobody users 0 2010-12-26 20:42 Misc Pics
iam trying to sync file server data into backup server machine by command- rsync -avu path/of/data ipaddress-of-backup-server:/path/where/to/save after running it ask for root password and manually it is successful.but i want to make it automatic.for that i also tried cronjob and also generated authentication key but iam not successful in login automatically..anybody know how to authenticate root to login for storing data in backup server.
View 14 Replies View RelatedI keep having failures with samba mainly that each day the /var/run/samba folder seems to dissapear so Samba doesn't start, normally I can just add the folder back and samba will start and work ok but today it fails.Does anyone know why this folder may just dissapear and if there is something I can do to get Samba working?
View 7 Replies View Related