Ubuntu :: Starting Up The SPH Program Gadget2 ?
Jul 19, 2011
So basically, for my research I need to use Gadget2. The only problem is, I have no idea how to "install" it, I guess. I've looked in the user help guide but I think it was written more or less for those that actually know what they're doing, hence why my research professor doubted my abilities to get it running.
So, I've downloaded all that .tar.gz files and gotten rid of the .gz part and now I have a bunch of .tar files (Gadget2.0.7, gsl-1.15, fftw-3.2.2, openmpi-1.4.3 and hdf5-1.8.7-freebsd-static). I've also done the whole tar -xvf thing to just extract the files and now I have 5 folders. I looked in their help guides and I think I might've done something right 'cause now I have some lib folders and some etc and some share ones.
I think my message passing interface is operational because every time I shut down my computer now there's this weird screen about some pretty harmless looking stuff like my computer is openly passing messages so I think I'm fine there. But how do I make sure all the other stuff is good? I've tried installing and configuring (maybe not in that order, mind you) but I'm still kinda lost.
View 4 Replies
ADVERTISEMENT
Jan 21, 2010
I installed Wine, and installed my printer Epson Tx110 scan program afterwards, but I cant get the program to run at all? Did I do anything wrong?
View 1 Replies
View Related
Mar 23, 2010
I would like to know if there is anyway of starting a program via console.
View 6 Replies
View Related
Aug 22, 2011
I'm logged into my Ubuntu 11.04 box using SSH, and I need to start a program - but it is a Windows GUI program which runs under WINE.
How can I start the program from the SSH terminal so that it opens on the desktop, and then stays open even after I log out of SSH.
View 3 Replies
View Related
Jul 10, 2011
A server like Lighttpd or Apache starts automatically at boot after you install it. How do I stop it from auto starting? I'd prefer to manually start it when I need it.
View 1 Replies
View Related
Nov 2, 2010
i want to run my program and when it starts up shows an option to say : do you want to start this program at start up? and then if yes copy this program at start up how i can do this?
View 3 Replies
View Related
Mar 22, 2010
I have a dual-monitor setup. I have some programs which I would like to start automatically. I each one to start up full screen on a particular monitor, in a particular workspace. Then I can use the workspace facilities to easily switch between the programs, and they will always appear on the correct monitor, in the correct workspace. (At least one of the programs (VMWare Workstation) does not seem to be startable using the facilities to save the current session on logout.)
View 2 Replies
View Related
Mar 25, 2010
Suddenly within the last 4-5 days my mail-notification program stopped starting.Googling the error really doesn't give much help, it sounds like the same error message is in tens of libraries.Anyone know what might be going on?Running Ubuntu Jaunty, and already tried reinstalling the program. It's the normal mail-notification from the Add/Remove Programs thing.
Apparently it only does this when it tries to connect to the internet. It runs fine when I'm not connected, but crashes as soon as I hit refresh. (And also crashes at startup when I'm already connected to the internet.)
View 2 Replies
View Related
Jul 22, 2010
After running for a while, often after starting a program that displays graphics, such as Shutter, Gimp, Ocular, or maybe simply having previews in Dolphin (as some of my folders default to large previews)most menus, and some windows will go completely black. Some simply grey out (only ksystemlog does this that I have noticed so far)Blindly clicking anywhere on top title bar has no effect (would expect minimize/maximize etc to work if hitAlt-leftmouse or alt-middlemouse will allow window move/resize - black actively conforms to new window size/shape.
Often this blackening is preceded by a loss of all global hotkeys, which may not be related.With no visible menus or buttons, and with no hotkeys I am forced to hit the PC power button and allow kubuntu to shutdown.If I am lucky and hotkeys still work i can simply log out with ctrl-alt-shitft-del and logging in again fixes the issue.Linux betlogbox 2.6.32-23-generic #37-Ubuntu SMP Fri Jun 11 08:03:28 UTC 2010 x86_64 GNU/Linux
View 1 Replies
View Related
Feb 11, 2011
I have matlab installed on a network (I am not the administrator) and we usually start the program by typing "matlab", then choosing one of the version options from the menu i.e. typing "n". So because of this, trying to run matlab programs or commands directly like this... matlab -r ProgramName
...does not work. I just get the menu as usual and everything else is ignored. I assume the admin has overridden the matlab command with their own custom script. So my question is can I start a specific version of the program by specifying the folder that the version is in? I thought it might be something like /opt/matlab/version -r programname
this might look foolish, but I am a bit of a linux noob. Let me know if I should just ask my administrator but I thought there might be something easy I am missing.
View 1 Replies
View Related
May 8, 2010
i wanted to know how can I make my programs or script automatically start at boot time ,for example if I restart my server at any time they start at boot time automatically with no need to any body to start them.
View 2 Replies
View Related
May 24, 2011
I am planning to start a new business where I will get satellite internet as my backbone @ however I need have some questions since my company will be "fully open source" or " Linux-ish" first of all I would like to know which billing software is the best for the job , I came a cross "Optigold isp " and it seems awsome in its features especially the affiliate programs (eg. customer forward 5 more customer and get free month of internet access).
second , I would like to know how the network should be created @ because I will start in one city first and then I will extend to another cities basically in every city there will be one ground station to receive the satellite signal @ but I want to make the billing server and the router in one city only @ what router should I consider @ I dont have that much of knowldge to decide (gentoo , centos , ubuntu ....) even redhat is ok I wold just like to know if there are any pre-packaged solutions , I would like to know
View 6 Replies
View Related
May 18, 2010
I want to record an internet radio station starting at 2:00am tomorrow morning. The specific program on the radio station lasts until 6:00am. The command I need to run to record the station is: Code:mplayer http://wjcu.jcu.edu:8001/listen.pls -ao pcm:file=indie_heat_of_the_night.wav -vc dummy -vo nullI'd use cron, but 1. I'm not sure how to and 2. it seems unnecessarily complicated for something that I only want to run once. If cron is the only/easiest solution, I guess I'll just have to resort to that, but I'd rather not.
View 12 Replies
View Related
Jul 18, 2011
I installed OS11.4 on my old laptop, Compaq Armada E500., 512MB RAM, ATI Rage Mobility. During installation I chose "minimal server" and added some development packages, lxde and a little more. I chose to start in runlevel 3 which is full networking without X. Still, when computer is booted it tries to start Xorg which doesn't work because of some problem w driver. The start-up seems to stop there, it never loads completely - seems most things in runlevel 3 are not started (see below) I can manually login on laptop and fix it - but never permanently, same thing again after reboot.
I have checked /etc/inittab & yast - both states default runlevel is 3. I have checked services to be started both directly, browsing directory /etc/rc.d/rc3.d/, and with YaST, it is very clear X should not load during boot. But, as said, it does.. I don't really care about the driver problem right now, I can fix that later when I have more time. So how do I stop X from getting started automatically?
More info, if needed: The installation also stopped with message on tty1 "Starting YaST2" and tty8 showing errors with graphics driver (mach64). The system seemed to be installed though, so I simply rebooted (issuing "reboot" from tty2).
[Code]....
I'm not completely sure where it stops, network is configured but keyboard is wrong and mysql & everything after is not started, so somewhere between S02network and S06kbd. I'm going to use it as a server for testing purposes so no X is actually needed - however I do want to have X & lxde installed just in case, my Internet connection at home is terribly slow so I need most things I might need in the future installed today.
View 1 Replies
View Related
Feb 23, 2011
I was wondering whether there is an inbuilt logging system in UNIX?
I ran and installation and the program opened up automatically but I can't find the program executable.
If I could find a log then I could locate this file.
View 9 Replies
View Related
Aug 29, 2010
Does anyone know if there is a program that behaves the same as Microsoft's OneNote program for linux?
View 3 Replies
View Related
Jun 23, 2011
i am running ubuntu 10.04. I am looking for a converting program and I also need a DVD making program. I'm unsure if one comes preinstalled already.
View 4 Replies
View Related
Feb 15, 2011
I will have to code this. However I am lacking of time since I have too much to do. make a short code bash/dash to prompt the country with Zenity, then, get the PLS or m3u url and prompt with another zenity which radio to play. http://www.listenlive.eu/index.html
My code to get url's radio country.htm is:
Code:
View 2 Replies
View Related
Apr 15, 2011
I have problems to get it work. i have tried to use pm-utils, but it does nothing.
What is need is to kill application, when pc is going into suspend to ram and run that application again on wake. It's a graphical application.
View 1 Replies
View Related
May 7, 2010
I am new to linux and am trying out script writing. I am using shell. How can I make a script to open a program then operate within that program?
View 5 Replies
View Related
Dec 14, 2009
Is there anything like burning rom from nero or roxio cd/dvd copier. Do you know of any dvd copying program? like without making the image and then burning with just one process just copy the disc sorta program like roxio dvd copier? I wanted to make copies of movies I made a dvd of but aside from image burn which is a hassle to make the image first. is there something for burning on the fly or dvd/cd copying? infrarecorder and cdburnerxp do not work for me at all.
View 3 Replies
View Related
Apr 30, 2010
I have a jsp code. After executing that code, a Java program should be executed without refreshing the page. that is, my first page is a login page which is in jsp. After logging in the next page must be displayed which is a Java code. is that possible? Can we use applet for that?
View 1 Replies
View Related
Mar 8, 2011
How do I create a program file for a new program?
View 1 Replies
View Related
Jan 15, 2010
Ok so Basically i have 2 questions
1. i know how to create a file with c++ using but is there a way to save it to a specific location on your computer with windows and linux
Code:
2. i need to know how to run/execute/open a file in a c++ program im using and its not working
Code:
View 4 Replies
View Related
Feb 21, 2010
I am looking for a very particular sound wave simulation program. To get an understanding of what i want let me describe it to you in a different way.
Imagine your look at a bowl of water from above and you poke the water at a specific frequency you will see wave patterns showing. Well im after a program that can generate that pattern with any particular frequency that i set, and to allow me to place different shapes and objects around the sound source or sources (i may want to use more than one sound source that may or may not be at the same frequency as first.) and see what kind of reflections i get.
I was also wondering if instead of a point sound source you could have an entire shape giving off a specific vibration. This will give very interesting results that i am also after.
There are some programs that show sound simulations that i have described but nothing that can do the requirements that i desire. Do any of you guys know of any programs that can do this? if not how much would it cost to build such a program?
View 2 Replies
View Related
May 7, 2010
VLC is not starting in my debian lenny. I tried to uninstall vlc, then installed again. But nothing happened. Error appeared again. What i need to do?
View 3 Replies
View Related
Jul 20, 2010
I seem to have a problem with klipper on Kubuntu Lucid (amd64). used to start automatically on startup, but that stopped working. I then put it in autostart, but it still does not want to start automatically. However when I start it manually it works fine
View 3 Replies
View Related
Sep 9, 2010
I have a freshly installed 10.04 ubuntu, but brasero is not starting, what could be the reason? I started it with the option to show errors, but it didn't show any, it just didn't start.
View 3 Replies
View Related
Oct 1, 2010
I am trying to install spss 16 on an hp. I have activated the license and everything but when I run ./spss on the spss bin directory (this is the executable the install instrucyions tell me I should use) I get the following error after a little intro screen:
Code:
testu@Schwarzschild:~/SPSSIncb/SPSS16/bin$ sh ./spss
#
# An unexpected error has been detected by HotSpot Virtual Machine:
#
# SIGSEGV (0xb) at pc=0x20656770, pid=2334, tid=2338302832
#
# Java VM: Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
[Code]...
Aborted As you can see, I created an user to test the install (also this user has compiz completely disabled) and installed spss on his home directory.
View 5 Replies
View Related
Dec 12, 2010
played around with Plymouth Manager yesterday, and today, my system would not start. I got some help from #ubuntu, and to my surprise, startx ran without problems. sudo service gdm start also worked perfectly. However, when I boot up my computer, I am always taken to the recovery screen. How can I stop this from happening, get my boot screen back, and make everything work as it should?I'm on Ubuntu 10.10 32-bit with an nVidia GeForce 8800 GT and version current on the nVidia restricted drivers.
View 9 Replies
View Related
