Ubuntu :: Specify Network Path Filespec In A Command Line?
Aug 24, 2010
I need to add a network path to a configuration file, but I can't figure out how to write the path.
The command dir \computernamesharename works in a Windows command line.
ls //computername/sharename/ does not work under Linux. ("No such file or directory.") ls smb://computername/sharename/ does not work either.
Nautilus shows the location as smb://computername/sharename/, and I can read and write in the shared directory, so it's mounted and I have access.
So how do I get it to work? How do I specify the path so a command line will recognize it?
View 3 Replies
ADVERTISEMENT
Mar 1, 2011
I have a quick question: how can I make the path short on the console? My problem is that if I descend 10 levels in a directory tree, the path becomes so long that it takes more, than one line of the console window. Is there a way to shorten it, and show only the name of the current directory, without the whole path, i.e., instead of
Code:
v923z@penguin: first/second/third/fourth/fifth/sixth/seventh/eighth/ninth/tenth>
only
[code]....
View 3 Replies
View Related
Jul 24, 2010
For example, I always go to this path:
/user/something/somefolders/somewhere
but I don't want to type
cd
/user/something/somefolders/somewhere
in the terminal all the time, can I have some short hand to do so? for example, can I do something like
cd commandPlace
to replace the path?
View 5 Replies
View Related
May 13, 2010
We have two paths. First one is directory, second either dir or file.
/a/b/c and /a/d/e.txt
Relative path from first path to second will be: ../../d/e.txt
How to get it in linux terminal?
PS: For those who ask "what is use case?" - creating lots of relative symlinks (just as an example)
View 1 Replies
View Related
Dec 14, 2010
How can i write a shell script that takes a file path as command-line arguments.and it should report whether the path denotes a file or a directory.
View 2 Replies
View Related
Jul 12, 2011
kernel 2.6.21.5, slackware 12.0
GNU bash 3.1.17
Code:
As you can see, /usr/local/bin is in the path. However, bash does not look for nasm in /usr/local/bin.
If I am root, things go well:
Code:
View 16 Replies
View Related
Aug 18, 2010
I cannot connect to the internet on the command line. Things like firefox or chrome browser work fine. But on the command line programs like 'links' fail to work. This is on a machine behind a proxy, I have the http_proxy and https_proxy environment variables set properly.
View 5 Replies
View Related
May 14, 2009
For some reason Ubuntu 8.04 doesn't save my college network settings, so I have to connect manually each time. This is what I physically have to do to connect:
1) Click on network manager icon in the notification area
2) Click "connect to other wireless network"
3) Type in "NETWORK_NAME" into network name area field
4) Select WPA enterprise under wireless security
5) Type in "USERNAME" into username field
6) Type in "PASSWORD" into password field
So what I would like to know: is there any command line equivalent for the above six steps? I would like to write a script which will carry out the above six steps for me automatically, using the parameters NETWORK_NAME, USERNAME and PASSWORD.
View 7 Replies
View Related
Mar 23, 2011
I hosed my installation of F14 by installing from some "experimental" repositories. Now I only get XDM at startup and an xterm on login. This would be fine if I could use yum to do some updates, but I have no network connection. I have been over the man page for nmcli dozens of times and none of the options there seems to start anything. I have also tried starting dhclient or using:
ifconfig eth0 up Nothing. So, is there a reliable way I can just connect to the network? This shouldn't be so hard.
View 8 Replies
View Related
Mar 10, 2010
I frequently ssh into machines to do work. In some cases, the machine is headless so there is no option to log in.Under Debian and on older versions of Ubuntu I would pull out the avahi and network-manager packages and manually configure the interfaces file to my liking and be done with it.However, I would now like to learn how to work within avahi/network manager. So, is there a doc somewhere explaining how to work with modern Ubuntu networking at the command-line level? Ie: Setting up a wireless connection, setting static/dynamic IPs, etc?
View 3 Replies
View Related
Mar 6, 2011
I'm running Ubuntu 10.04 LTS, Lucid Lynx and I'm having problems implementing changes to interfaces.I have made changes to my interfaces via the GUI but when I open a terminal window and so a ifconfig I find that nothing has changed. I've opened an editor and looked at etc/network/interfaces but changes made with the GUI never make it to the config file.Does the networking GUI result in changes to the etc/network/interfaces file.
View 1 Replies
View Related
May 29, 2010
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies
View Related
Nov 4, 2009
I run Ubuntu, and it has a nice GUI widget thing that connects me to my home wireless network when I boot. I don't have a problem with that. But suppose I don't start X, and boot to a recovery console for some reason, like I did recently when my graphics were broken after installing Karmic. In that case, my computer won't be connected to the wireless network until I log into X normally. So I can't apt-get anything or anything. It's very annoying. And I don't know how to connect to my wireless network.
I know my wireless network SSID, and I know my WEP key or WPA passphrase. How can I log onto the network with commandline tools? Is there some basic program that I can just run "networkmanager <myssid> <mywepkey>"? I looked at the iwconfig man page and I honestly couldn't figure out how to simply connect to my network. Once I figure out how to connect to the network with command-line tools, where can I put an "autoconnect" script so that it will connect during startup, like it should anyway?
What I don't understand is, why the Ubuntu network manager nm-applet, doesn't just work as a front-end for more basic networking stuff. I don't see any reason why it should require you to start X before working; it could be a daemon that runs at startup, and there could be a config-file somewhere, but it doesn't even start running until I log onto gnome.
View 16 Replies
View Related
Jul 10, 2009
I am fairly familiar with Linux but had never ventured into Wlan settings / options / too much. I have compatible card (aetheros) and when running - iwlist wlan0 scanning - I get plenty networks showing up - meaning the card works. When I installed distro which is last night (before I ran update), I had that little bars menu at the top of the screen that showed available networks once clicked upon. Since I like to modify and make my settings better - I removed that little AT&T like bar, and now rebooted after update to find that I can not see available networks unless I use iwliset wlan0 scanning.... .#$*&)@&#(&%# - need I say more.
Two questions - how do you connect to the wireless network via command line? What is that vertical bars GUI tool called so I can find it and run it again? Is there (for the love of god) alternative to system-config-network GUI managment tool for wlan?
View 2 Replies
View Related
Aug 17, 2009
I'm tryn' to connect to my wireless network using command line:iwconfig wlan0 essid MY_NETWORK as root.
After this typingiwconfig wlan0
result is:
wlan0 IEEE 802.11g ESSID:off/any
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
[Code]....
I installed ndiswrapper in order to use ipn2200 WinXp drivers.
View 4 Replies
View Related
Jan 8, 2010
I am trying to do a command line installation.Finished the installation and my wireless card wasnt working.Did a "sudo ifconfig wlan0 up" and got it working.But for some reason wireless-tools is not installed thus I dont have iwconfig, iwlist, etc.The wireless works and connects fine off a liveUSB.So I am going to give info from this liveUSB run and maybe someone can suggest how I can set the right settings on the Command Line Installation I presume in the etc/network/interfaces.
View 1 Replies
View Related
Jan 22, 2011
I just recently installed ubuntu server. I want to be able to install packages and such but can't until I connect to Internet. I tried wifi but couldn't figure out how (I'm a n00b) but now I have ethernet and can't figure out how to make it work. So my question is, how do I connect to my Ethernet with ubuntu server, I could if I had graphical, but I can't get that until I have Internet. I didn't configure network during install, so how do I do it now?
View 3 Replies
View Related
Nov 29, 2010
I set up Samba using command line terminal, and my network does not work. I have Samba username and keyring passwords all set, then I go to gui system-config-samba, and my samba user profile password is incorrect. In the past, I have used a 10 letter password, however, every time I boot the computer, I have to go back in and re-enter the password.I wonder if samba is truncating the password because it only accepts an 8 character password? I have deleted the user, and added a new username, and it is still doing it.
If I go into the gui and re-enter the password, usually I can get the network back up with my windows machine. All of the parameters are correct, I use the network to transfer files from my Windows to my Fedora drive all of the time when it works.
View 2 Replies
View Related
Apr 25, 2011
I would like to manage the firewall from the command line or with files VIA puppet, however this peice of software seems pretty complicated compared to the other distributions and generic iptables commands / configurations we push out.
View 9 Replies
View Related
Apr 18, 2010
I'm trying to connect to a wifi network where it hijacks all requests and redirects you to a page where you have to agree to a terms of use before it lets you connect to the actual outside world. This is a pretty common practice, and usually doesn't pose much of a problem. However, I've got a computer running Ubuntu 9.10 server with no windowing system. How can I use the command line to agree to the terms of use? I don't have internet access on the computer to download packages via apt-get or anything like that. Sure, I can think of any number of workarounds, but I suspect there's an easy way to use wget or curl or something.
Basically, I need a command line solution for sending an HTTP POST request essentially clicking on a button. For future reference, it'd be helpful to know how to send a POST request with, say, a username and password if I ever find myself in that situation in another hotel or airport.
View 2 Replies
View Related
Mar 14, 2011
I'm thrilled using wicd to connect to wireless networks. But when I suspend my laptop using the special keys, I just want to disconnect from wireless without having to use any kind of GUI or curses user interface. It says in the documentation that wicd works by sending DBUS messages, so presumably it's possible to write a command that talks to the daemon directly.But I can't figure out how.Does anybody know by means of what shell command I can tell the wicd daemon to disconnect me from my wireless network?
View 2 Replies
View Related
Nov 2, 2009
Next week we will get a new Server for rent with a preinstalled Debian. If we download the Networkinstaller and put it in Grub, it is possible to set some settings with a script or commandline? We need SSH and the Network haves to run. So we have to set up the Networkadress , Gateway and Netmasq. So if the Networkinstaller is booting that we get direcly access with SSH to install CentOS. It is possible?
View 1 Replies
View Related
Apr 7, 2010
I'm using linux suse 9.3. Recently i try to run execution files but it shows an error try running with the option "-console" or "-silent" When I tried with the -console option, I got the error - The wizard cannot continue because of the following error: Invalid command line option: console is not supported (1001) (403)
[Code]...
View 1 Replies
View Related
Sep 23, 2010
The university I go to uses a WPA2 wireless network that requires a netID and password to connect too. I installed wicd but I can't seem to connect to this network, is there a way to add this functionality to wicd, and if so, how do I do that (links to a how-to or guide would be nice, I've yet to find one).
Also, I spend most of my time on campus in the command line, so I'd like to know if there is a way to use command line utilities to connect to this network (again, a guide or how-to would be nice)
I can get online through my fedora live USB just fine (w/ network manager) but I'd rather get on directly from slackware.
View 3 Replies
View Related
Feb 27, 2011
I have a CentOS 5.5 server running currently with a Netgear gigabit ethernet card and for wifi I have a wi-fi card with the chipset: RT2860.Now I have gotten the ethernet card and wi-fi card working but my main question is: How do you bridge the connection between the ethernet card and the wi-fi card to create a wireless network with a hidden ESSID if possible and WPA encryption? (So the server basically acts as a wireless router as well as doing all the other stuff I need to do on it).
View 2 Replies
View Related
Jun 14, 2011
When I add some path in .bashrc by commenting out old path and adding new one like this:
#EXPORT HOME_PLAY=/home/gem/old_play
EXPORT HOME_PLAY=/home/gem/play
EXPORT PATH=$PATH:HOME_PLAY
After saving above changes, I enter the command: source ~/.bashrc Now if I do echo $PATH, the path shows both the old PLAY_HOME and new PLAY_HOME. This is really bad and messes up a lot of things in my project. This problem only goes away if I logout or reboot, a rather very long process. What is happening is that the old path is added to new path element and the old path includes the old path element you want to remove.
View 10 Replies
View Related
Feb 17, 2011
As a strategy for learning linux I have decided to adopt using a lean windows based approach. I want to focus on command line machine system, network basics, and file management knowledge. In other words find out how desktop manager does it's business, so I know how to master my machine, but by and large once I have made my choices, leave it alone to do just that.
I figure I should know how applications are internally configured etc., but I also figure an apps GUI and config choices should take care of installations, and program usage as in M$ windows. Surely taking care of an applications dependencies are the responsibility of the developer, are they not?
I am working my way through "Rute User's Tutorial and Exposition (Version 1.0.0)" right now for an overall viewpoint. Can anyone suggest a specific source for a point by point explanation of the command basis of a generalised "desktop management" application (KDE,LXDE)? Better yet would be if it had some parallel comparison of the varied approaches taken by different distributions of linux.
A secondary question, is that allowed? Up to a certain point in Ms windows, a thorough knowledge of DOS 6.xx would theoreticaly enable one to more or less duplicate the actions of the windows overlay. Is there a basic distribution (or subset in all of them maybe?) of linux that would be consistent with that paradigm? What would be analogous to DOS batch files, or GM-Basic? Oh! that's 3.I am certainly appreciating the depth of this forum, and the breadth of knowledge among you forumite's. Reading it is time well spent.
View 7 Replies
View Related
Dec 9, 2010
I have a many text files that have XML tags all shoved into 1 line. I want to create a new file that splits each XML tag onto a new line. code...
View 3 Replies
View Related
Feb 24, 2011
I'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:
$ (something) -l 154 stuff.py
150: def foo(bar):
151: """
[code]....
View 5 Replies
View Related
Aug 22, 2011
How can I print Linux command line history without including the line numbers? I want to send it all to a text file like this:history >> history.txt
View 1 Replies
View Related
