this is the frist time I've installed Ubuntu as my main OS, but I'm having some trouble.I cannot get my dual screen setup to work properly. I'm running a gigabyte mobo, with an core i5 and a Nvidia 8800 GTS 320mb video card (2x dvi). My monitors are a 24 inch acer (1920x1200) and a 32 inch Phillips TV (1920x1080).
The main screen, the acer, is working just fine with his max resolution via a DVI cable. My tv is connected via a DVI to HDMI converter and it does work, but only at 640x480 resolution. The screen is very small in the center of the TV. I've tried changing the resolution in the xorg.conf file but upon restarting it just turned my TV off.
i am attempting to setup a macbook run by os x 10.5 for dual boot with ubuntu 9.10.
however, when get the part where usually a gui interface which allows one to specify the size of the new ubuntu partition appears i only get the options for using the entire disk, the largest free space or manual partition.
From what I have read around the net I should be able to set up my hard drive so that I have one small partition for Windows 7, one small partition for Ubuntu 10.04 and the remainder can be a third partition which contains all my files (accesible from both OS).irst question, is this possible?I tried to install Windows 7 first (I hear installing Ubuntu first creates havoc), then i tried to use the partition editor that comes with windows 7 and it wont let me shrink the partition any smaller than 700GB even though it is 98% free ( I have tried defragging thatdrive).Now Im wondering, can I use GParted to format my disk, then set up all the partition, and then install the OS's
So I wanted to dual boot Ubuntu with Windows 7, but have no idea how to partition out Ubuntu. At the moment, I'm working with a 300GB harddrive that will solely hold installed applications and stuff like that. Any shared/storage data will be put on separate harddrives altogether.
I plan on using a 40-50GB partition for Windows 7 alone (no installed applications and stuff). And here come the questions about Ubuntu partitioning. From what I read, do I only need three separate partitions? (/, /home, /swap) Even then I'm not 100% sure what each of these partitions represent. But my research says... / = equivalent to my Windows 7 partition, /home = the partition where installed applications go and other non-essential Ubuntu stuff, /swap = virtual memory
With all that said, to comfortably run Ubuntu can I have my partitions be these sizes?
/ = 10GB /home = 20-30GB /swap = 2GB (Do I even need this if I have 2GB of ram?) Windows 7 = 40-50GB W7 Apps = remaining space
I don't know what exactly I want to do with Ubuntu, but is a /home of 20-30GB adequate to install lot's and lot's of apps?
I'm in widows xp sp3 right now, I'm just wondering how do I go about, setting up dual booting with out breaking my Windows Xp OS, being last time - I setup Dual booting with the Ubuntu setup disk and that didn't work at all, Xp was broken after that. Would anybody know of software that does the dual-booting setup from windows with the linux ubuntu iso image?
I'd like to dual-boot it with Windows 7, but I'm not sure exactly how I should set things up. Searching has helped but I would really appreciate advice specific to my scenario. Windows 7 to run a couple games (mainly Starcraft II) and for anything that doesn't run on mac or linux, and Ubuntu to do most of my normal everyday stuff (documents, programming projects, web browsing, listening to music).Hardware: 1TB hard drive, 4GB RAM, AMD Athlon II 435 processor.
I'm trying to seup my dual ethernet card. One to go to the internet and the other to serve the LAN. Do I need a router for the NIC that will serving the LAN and another one to the NIC that will be connected to the internet? I don't want the LAN computers to connect to the internet. Can someone please give me a description on how to set this connection. And yes I will be using my server as a DHCP and DNS BIND.
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
I running 1 pc touchsmart IQ816 (windows7, standalone) and a sunfire server (fedora 14, standalone).Because my touchsmart screen doesnt support dual screen input, i'm reaching my server true vnc. Is there a beter way (VMware?) to handle this problem?Im new in VMware: Can a esxi server from vmware help me out in this situation? Do some people have experience on this?
I am using an Abit NF7-S V2 mobo to set up my dual boot system where each OS (XP & Ubuntu) will run on a totally separate HD (as opposed to both OS�s being set up on one HD). Since they will be running as stand alone boot drives, how does one set it all up so that one can boot from one or the other? I don�t see how I can do it from the bios. How do I do it?
I am having some trouble setting up a dual boot with Win XP and Slackware 13.1. Lilo lists both Linux and Windows, but when I select Windows, all I get is a black screen. I have two hard drives, sda1 and sdb1. I first installed Windows on sdb1 (it is a smaller, older drive). I then installed Slackware on sda1 and selected to install Lilo on the MBR. I'm guessing that by doing this, I wrote over the Windows information that was already there. Could this be my problem? I feel like this should be an easy fix, but I just don't know where to start in order to fix it. If it helps, here is the end of my lilo.conf file.
# Windows bootable partition config begins other = /dev/sdb1 label = Windows table = /dev/sdb # Windows bootable partition config ends # Linux bootable partition config begins image = /boot/vmlinuz
I would like to set up my computer to dual boot with two different linux distributions, Ubuntu 10.04 32-bit and Slackware 13.1 64-bit. I'm not 100% sure how to go about this exactly. Ideally I would like for both distributions to share the /home directory, that way I can switch between distros and keep all my personal data neat and tidy without having to access it across partitions. This has the added benefit of keeping my filesystem usage in check. However I'm not sure if I'll have to go through a lot of permission headaches with this scheme. I would be using the same username on both distros. At the moment I'm thinking of having a common /boot directory, two different / directories (one for each distro) and a common /home but I don't know if this is feasible. I
setting up my dual monitors. I can get a continuous screen but the screen does fill the lcd screen all the way. I have dove in to xorg. I'm on fedora 12 .
I am new to Linux and Debian. I have Compaq Presario R3000 laptop, which is 5 years old now. I have RealTek RTL8139 family PCI Fast Ethernet NIC. Currently I have a broadband connection at home. I have dual boot Windows XP Professional and Debian (which I installed a week ago through CD). I have done some preliminary tests for the network and I am posting the screenshots for the tests (e.g. lspci, ifconfig, etc.). I also did two more commands. For 'cat /etc/network/ifstate' the output was 'No such file or directory'. Same output was for the command 'cat /etc/network/options'.
I have been trying out different Linux distros to dual boot with Windows Vista. First I tried Ubuntu and it worked fine. Then I tried Fedora 15 and it worked fine as well. Then I went back to Ubuntu but now I have decided to stick with Fedora. The first time I installed Fedora it gave me options for choosing default OS and other things, now I can't remember how I did that and can't figure out how to do that agian. How do I do that agian? I want it to automatically boot into Windows Vista. I am installing Fedora on a seperate hard drive.
I have Windows 7 on my laptop and am attempting to install Ubuntu 11.04 from CD.I boot from the disk drive, follow the prompts and eventually get to the screen where I can set how much space I want to give to the Ubuntu partition vs the Windows partition. My hard disk is 250GB, so I reduce the Windows one to 100GB (currently has 80GB of files on it) and set the Ubuntu one to 130GB (the other 20GB is split between the two hidden Windows 7 partitions).
I then click to continue and the progress bar for the install starts up but doesn't move, it just sits at 0%. I realised that the dialogue box underneath the progress bar can still be expanded and asks me to test using -n and -s, but when I type either of these into the box and hit return, nothing happens. I have checked my download of the .iso I used using WinMD5Sum and the hash matches up. I have already tried installing from USB but this threw an error, hence using CD. My laptop is a Dell Inspiron 1546 running Win 7 Home Premium 64 bit Processor: AMD Turion X2 Dual-Core Mobile RM-75 2.20GHz
my laptop screen has 1900x1280 (native resolution) and my second monitor has 1600x1080
After browsing the forums and messing around with drivers I managed to get the resolution up to 1600x1080 (from 1000x800 at install) on the laptop screen. No luck at all with the second monitor. I currently have it connected with both VGA and DVI.
my understanding is I need to use twin view to setup the second monitor. I've read several of the earlier posts but haven't been able to get it to work. Here is my current xorg.conf file:
I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
I must say I've spent many nights trying to get this touch screen going on ubuntu but with no luck. Does anyone have any general step by step instructions or is there any sites I can go on. I have a Acer t230h and the furthest Ive got with it is typing something into the terminal and getting out aload of strange looking symbols and stuff. I presume that was in the right direction but i forget what I pressed... something like 'lbus' but longer I think. I have the touchscreen info plugged in with a usb lead so what ever their called in ubuntu might be a help. another thing I did find something related to the screen in the /dev/ folder by plugin it in and out a couple of times and spotting what file was missing and coming back but when I run it in terminal this is what happens - evan@ubuntu:~$ cat /dev/hidraw0 cat: /dev/hidraw0: Permission denied
I have a Radeon Mobility M300 video card on an IBM T43 labtop. I have this labtop on a docking station connected to a Dell screen. SaX2 doesn't recognize my Dell screen, and so from the labtop commands I am unable to have the main screen on the Dell monitor and a secondary one on the labtop screen. I would like to have (if possible) my primary desktop on the Dell Monitor and the secondary one on the labtop screen.
In my corporate environment, I'm required to run a Windows machine that acquires a VNC session on a machine in the server farm. My windows machine is dual head with different resolution monitors ( 1600x1080 on left and 1920x1200 on right). If I create a VNC session that spans the monitors, then maximizing a window in the VNC session causes it to stretch across both my monitors.
Instead, I want a "maximize" event to behave like it does on my windows machine -- I only want to maximize to the display that the window is on.
How can I define what, what I'll call, "maximize regions"? Regions in the VNC graphical plane where when I click "maximize", the window only expands to the region it currently ( and mostly) resides in.
Can I do this in gnome, X, xrandr, or some other magical interface?
using ubuntu 9.10 quick summary: need to set my tv resolution to 1840x1036 to see the whole desktop without cropping i just got a panasonic plasma tv and am trying to use it to watch movies from my computer. I hooked it up using my graphic card's dvi out. Since the TV came with a dvi to hdmi adapter I just had to buy a hdmi cable and now its set up to run under 1080p input. So I got 1920x1080 resolution for the tv. The problem is that the resolution does not fit exactly into the tv's screen. I am missing about 30 pixels top & bottom and some on the sides too. This results in me seeing my desktop on my tv, but the top panel with the applications menu etc is just out of bounds.
Under windows xp I have the same problem, but the nvidia control panel there has an option to "Adjust desktop size and position" which kind of works. Well you can resize but you cant position the picture. Resizing makes my actual resolution 1840x1036 pixels. With that resolution my left rigth top and bottom edges are all inside the TVs screen. Now i tried to do this in ubuntu using nvidia-settings and manually editing xorg.conf, but I am having no success at all. Nvidia or the x server or something is totally ignoring any modlines I include for my second screen (tv), and always shows 1920x1080 ... I have no way to scale the picture from the tv menu so I need to scale it in ubuntu. Does anyone know how to do this ?
The native resolution of my monitor is 1920x1080. I can't get Ubuntu 10.04 to display at this resolution. Current xorg.conf (relevant sections):
[Code]....
I was able to get the terminals to run at 1920x1080 by adding Code: video=sisfb:mode:1920x1080x32,rate:70,mem:4096 to my grub command. That's nice, but I really want Xorg running at that resolution, and it didn't. I've been working on this for hours, through dozens of gdm restarts with every variation of the above I can think of.?
I have ubuntu 10.10 installed on my computer in dual boot with windows 7, but i am using a 27-inches Samsung screen through an hdmi cable to connect my computer. whenever i try getting on ubuntu, i cannot see the top and bottom of the desktop (so i cant access the menu bar or anything!)(while using my spare vga cable) i tried downloading the nvidia driver & utility for my video card (gtx 460), but even using that, i could not setup my screen resolution manually. When i setup my windows, i was able to manually setup a custom resolution (i.e. 1842x1026) through the nvidia utility to be able to get the screen the fit properly.
I was wondering if there is any way i could do the same for ubuntu, perhaps through terminal.
I have been successfully using VNC to control a couple of Linux boxes from my Windows PC for some time ... using TightVNCViewer on Windows and the default vnc server at Linux. All machines on my local network, no internet access required.
However, I just upgraded both linux boxes to Ubuntu 11.04 (released version) and VNC is almost but not quite working...
Both installations are more-or-less straight out of the box default installs - I haven't had a chance to change much yet!
I have enabled remote control of the desktop in Linux, and if I start TightVNCViewer it does connect and I can see something. However, the desktop does not repaint when an item on the desktop goes away, which makes it pretty much unusable.
I upgraded TightVNCViewer to the latest version in case that was the issue, but no change.
Is there a setting somewhere that I am missing? Do I need to use a different Viewer package on Windows?
I'm trying to script the spawning of GNU/screen windows by using commands of the form screen <CMD>.
For some reason when I start GNU/screen (by hand), the shell that it starts in window 0 (/bin/bash) does not contain a $STY environment variable. Without this commands like screen vim start a nested screen session, not another window as I want.
My environment is somewhat unusual. Here's how I end up in it:
ssh robm@somehost sudo su sharedaccount script /dev/null screen
The script /dev/null step exists because the TTY device allocated for the robm user cannot be accessed by the sharedaccount user. The script command allocates a new TTY that is owned by the user that invoked it, solving that problem.
If I skip the sudo and script steps, GNU/screen sets $STY just fine. In other words this works just fine:
ssh robm@somehost screen
Presumably something about sudo and script interferes with screen
I've been trying for very long now to adjust my screen resolution to my desired setting. So far, no luck. Just today I went in to examine what my xorg.conf looked like and this is what I saw.
My 3 year old daughter has shown me up and appears to have enabled the 'Visually impaired setting' for the 'Log on' screen; the problem is that I'm not sure how she did it and, naturally am unsure of how to undo what she did.She has her own account which has limited privileges, I'm assuming that whatever she did she did from the initial 'Logon' screen.
