When I try to run "bottomFeeder" with this command: Code: ./bottomFeeder bottomFeeder.im it exits and prints this in terminal: Code: bottomFeeder: config.c:397: prvTidySetOptionBool: Assertion `option_defs[ optId ].type == TidyBoolean' failed. Aborted what is the problem? How can I fix it?
View 1 RepliesSince several weeks Firefox often stop working displaying a window "assertion failed" with the following content:
Code:
ASSERT: node must have _DOMElement set
Stack Trace:
[code]....
after install virtualbox i have this error when i try to run it.
GLib-GIO:ERROR:gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL) Aborted (core dumped).
When using geeqie to browse a directory with .CR2 and .JPG files, the last pair of .CR2/.JPG is not shown in the list (on the left side of the UI). Moreover, after a few operations (PgUp/PgDn, etc.), I get:
Code:
**
ERROR:filedata.c:676:file_data_free: assertion failed: (fd->sidecar_files == NULL)
Aborted
my gnome searchtool crashes everytime I search something. Runnung gnome-search-tool from terminal I get the following error:
Code:
ERROR:gsearchtool-spinner.c:666:bump_spinner_frame_cb: assertion failed: (frame != NULL)
I could locate the reason for this as far as it has something to do with my icon theme. I use Mac4Lin Icon theme, which is the one causing those crashes. With another one it works fine.So the problem is now, that I don't want to change the theme, I want to find out what's the matter and fix it. Because the error message says something about spinner I tried to erase the folders "actions" and "spinner" first, but with no effect, so I restored them. how to find out exactly what's the issue or which icon causes the crash?
I just upgraded opensuse from version 11.3 to 11.4 using the online method changing the repositories. But now when i log into my gnome session as "normal user" and open a gnome terminal, then trying to launch a graphic application such as gedit or any other application that relys on X, it returns a problem such as:
Code:
GLib-GIO: ERROR: gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)
The message can show once or repeat several times. I didn't have this problem before.
As root, type "zypper update" and get several lines of the following error:
**
GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)
Loading repository data...
Reading installed packages...
Nothing to do. Used zypper dup to upgrade from 11.3. Still have boot problems (will open another thread), but had major problems upgrading timezone. File downloads would reach some percentage of completion, then B/s would slowly reduce, to zero. Upgrade would halt until manually aborted. Solution was to manually download 5 timezone files and install them in a directory repository. File download did not specify just the timezone file, but also a part of the directory. Could this be part of the problem? example: ./rpm/i586/timezone-2011d-0.2.1.i586.rpm instead of just the file name.System is a Dell 3000 (Pentium 4, 512MB memory).
getting that message repeated few times after trying to update opensuse 11.4 kde "(<unknown>:8952): Gtk-CRITICAL **: IA__gtk_notebook_get_tab_label: assertion `GTK_IS_WIDGET (child)' failed" I changed the windows decoration from oxygen to laptop and back to oxygen and since then I am getting that message
View 1 Replies View RelatedI've installed it but when I start the daemon with
Code: xmms2d I get a series of errors: Code: 17:00:44 FAIL: xmms_mediainfo_reader_wakeup: assertion `mr' failed 17:00:44 INFO: ../src/xmms/main.c:563: Using output plugin: pulse 17:00:44 ERROR: ../src/xmms/main.c:567: Baaaaad output plugin, try to change theoutput.plugin config variable to something useful 17:00:44 ERROR: ../src/xmms/output.c:1019: initalized output without a plugin, please fix!
17:00:44 INFO: ../src/xmms/main.c:361: Installing scripts from /usr/share/xmms2/scripts/startup.d
[Code]...
I'm trying to debug a gtk app on ubuntu that crashes from time to time when I open a dialog. Lately I have found a sequence of actions that always reproduces the bug. And I always get this error: Assertion 'pthread_setspecific(t->key, userdata) == 0' failed at pulsecore/thread-posic.c:200, function pa_tls_set(). Aborting.
So my app seems to crash because an error in pulseaudio, which is strange. I made some google search and apparently, this problem exists with other apps. Then, following a suggestion in a bug report, I opened sound-preferences and disabled windows and buttons sounds. And surprise? No more crash. I know that gtk handles events from windows and buttons and so does pulseaudio. So, could it possibly be a bug in pulseaudio instead of in my app? Does anyone have an idea of what's going on here?
every so often while playing Minecraft (Yes, yes, a game) Java would just close every so often. I never got to see an error message, as I was running it with a shell script from a launcher Anyway, so after a bit of playing (Haven't found a way to reproduce it, happens at seemingly random times) The java window closes, leaving this in the terminal:
Code:
java: intel_buffer_objects.c:466: intel_bufferobj_unmap: Assertion `obj->Pointer' failed.
/home/usr/Minecraft.sh: line 1: 4771 Aborted java -Xmx1024M -Xms512M -cp '/home/me/minecraft.jar' net.minecraft.LauncherFrame
Minecraft.sh contains
Code:
java -Xmx1024M -Xms512M -cp '/home/me/minecraft.jar' net.minecraft.LauncherFrame
java version "1.6.0_22"
OpenJDK Runtime Environment (IcedTea6 1.10.2) (6b22-1.10.2-0ubuntu1~11.04.1)
OpenJDK Client VM (build 20.0-b11, mixed mode, sharing)
If you start gedit from the command line, then you can see this assertion error:
[bart@vectra ~]$ gedit &
(gedit:17187): GLib-CRITICAL **: g_string_append: assertion `val != NULL' failed
sys:1: Warning: g_string_append: assertion `val != NULL' failed
To the point:F15 2.6.40.3-0.f15.i686.PAE (from grub) running on a Lattitude D620Encrypted lvmThe last things I did before restarting, was to install ext2fuse, VMWare Player and then yum update.I can mount (on another F14 machine) both the boot partition and the LVM , fsck -f does not find anything on /boot or /.Escaping the plymouth screen during boot, I see:
Code:
...
Starting Initialize storage subsystems (RAID, LVM, etc.)...
[code]....
I am a little lost on this. Zsnes doesn't start and I get the following error when I try to run it in the terminal.
Quote:
Starting Mouse detection.
Unable to poll /dev/input/event8. Make sure you have read permissions to it.
Unable to poll /dev/input/event7. Make sure you have read permissions to it.
[code]....
I'm trying to boot Ubuntu from a LiveCD in a computer I recently bought that currently has Windows XP on it. The Ubuntu menu comes up when I boot but it always snags on an error "failed to restore CRTC configuration -22" or something like that, and just goes on ad infinitum.
I tried running Linux Mint too and had the same problem, which makes me think it's an issue with the computer itself - which is an Averatec, if that helps.
Unable to install Ubuntu 9.10 on a new internal harddrive. The hardrive contains no operating system. This hardrive is the only drive present in the system.
Whenever the installation trys to mount the ext4 partition the following error appears: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition #1 (sda) at /failed
Iv'e tried over and over to get past this error to no avail.
Code:
httpd: threads.c:321: krb5int_key_register: Assertion `keynum >= 0 && keynum < K5_KEY_MAX' failed.
httpd: threads.c:321: krb5int_key_register: Assertion `keynum >= 0 && keynum < K5_KEY_MAX' failed.
httpd: threads.c:321: krb5int_key_register: Assertion `keynum >= 0 && keynum < K5_KEY_MAX' failed.
[code].....
PHP5 was having an issue compiling, (started with trying to compile in OCI8 support, which is the biggest nightmare i've ever dealt with). I finally just ran it with ./configure --prefix and no other options. It installs successfully, but when restarting Apache 2 it fails with krb5int_key_register.PHP was working fine previously before rebuilding to include oracle. First error i included with Oracle was redefinitions from ldap.h within the Oracle/sdk/include directory. I need LDAP support, so i removed the ldap.h files since im using the library from openldap. LDAP was previously working perfectly fine before reconfigure. Tried to load shared module via pecl/pear, but PHP would not init the module even though it was added to php.ini.
I got an error while working with NetworkManager in new RHEL6/ Fedora14. I have a ZTE AC 2726 3G wireless modem. i had tried to connect it via NetworkManager . It only requires username and password to connect but the thing is that after putting all the credentials i had checked the option" available to all the user "and while i was trying to save the profile it shows the following error saving connection failed 0 can't write connection type 'cdma'I had google so many times around this error but no better solution is there .
View 1 Replies View RelatedI am getting some error when i compile cross compile "dbus-1.2.20". error Code: checking for XML_ParserCreate_MM in -lexpat... no configure: error: Could not find expat.h, check config.log for failed attempts so i downloaded te expat library sources i cross compiled. But again i am getting same error. I think i have to add "-lexpat" in LDFLAG. But i dont know how to do that.
View 1 Replies View RelatedAttempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed
I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.
I just loaded octave. I ran through a few examples of how to implement a script file. Everything works until I get to "plot". When I run the "plot" command I get the following.
octave:2> test1.m
error: can't perform indexing operations for <unknown type> type
sh: gnuplot: not found
Just to double check my work, I ran the following code:
y=[1 2 3];
plot(y);
I'm trying to compile a program and it gives me the following:
I checked cmath-util.h:46 and cmath-util.h:48:
I'm not a C person, and the author is unavailable so far.
I would like to set my FireFox up so that when I type something in the address bar that is not a url, it will automatically do a google search. I have done this before, but that was a while ago and I can't remember what settings to change in about:config.Currently, when I type something that is not a url, it performs a search and then automatically opens the first web page that it finds, like a "I'm feeling lucky" search. I just want to see a google list.
View 2 Replies View RelatedI am running Red Hat Enterprise Server 6.0 I am having issues getting kerberos configured as a client to join a domain. Im getting below error message. "Failed to join domain: failed to connect to AD: KDC has no support for encryption type"
View 9 Replies View RelatedI've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
[code]...
I installed tor with this :-
Code:
sudo apt-get install tor
And After installation, When I ran from vidalia , it gave me error :-
[code]....
I have a recent install of ubuntu 10.10 on a brand new rig, and everything appears to be working properly but I get these 2 errors during bootup that seem to make the book process take a bit longer than expected but haven't actually noticed a problem in performance.
[6.394416] hub 3-1:1.0: config failed, can't read hub descriptor (err -22)
[6.752860] hub 3-2:1.0: config failed, can't read hub descriptor (err -22)
I have been unable to find a site with information on what err -22 means. From what little I have found on the issue it seems to be something with the usb 3.0 hubs on the back of my motherboard?
Code:
[0.864023] PCI: Using ACPI for IRQ routing
[0.864024] PCI: pci_cache_line_size set to 64 bytes
[0.864081] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[0.864082] reserve RAM buffer: 00000000df7e0000 - 00000000dfffffff
[0.864083] reserve RAM buffer: 000000021f800000 - 000000021fffffff
[0.864120] NetLabel: Initializing
[0.864121] NetLabel: domain hash size = 128
[0.864122] NetLabel: protocols = UNLABELED CIPSOv4
[0.864127] NetLabel: unlabeled traffic allowed by default ....
When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies View RelatedWhen I try to save my X configuration file.. it says "Failed to parse existing X config file '/etc/X11/xorg.conf'!"
I've already deleted my current xorg.conf and created a new one using sudo nvidia-xconfig and run NVIDIA X server settings using gksudo nvidia-settings but still can't save..I am using 32-bit Ubuntu 9.10 and my video card is NVIDIA FX 5500..