When I remove "safely" my usb pendrive all my hard drives and partitions get unmounted. It's not permanent I just have to close the session and start again but sometimes it's kinda annoying because I'm in the middle of a lot of work and have to close everything... and if I'm working with a file in that drive sometimes I lose it...
View 1 RepliesI did a zypper dup upgrade from 11.3 to 11.4 with no errors. My shutdown command has always been halt -h and during shutdown, I would always see verbose info about the drives being umounted, the "term" signal being sent, and the "kill" signal being sent. Since the upgrade, I only see the "term" signal being sent, followed by shutdown. On every boot since the upgrade, the system goes through several hundred lines of file repairing as the file system is not clean after shutdown. For whatever reason, the hard drives are apparently being killed before the umount is complete. I have changed no settings. The problem exists whether I do a shutdown from the KDE menu, or run halt -h as su from a terminal.
View 9 Replies View RelatedI have a load of partitioned hard drives and even though the are refrenced in fstab I still get Bookmark Icons and they are also visable in 'Computer'How do you remove these icon?I would also like the ones not refrenced in fstab to only be mountable via password - lucid seems to just mount when you click, I did change this as in another post but it also made USB keys need a password
Code:
gksu gedit /var/lib/polkit-1/localauthority/10-vendor.d/com.ubuntu.desktop.pkla
change the ResultActive=yes to
ResultActive=auth_admin_keep
How can I see all the physical hard drives on my Ubuntu system — regardless of whether they're mounted — as well as their partition info, sizes, &c.? I have three physical drives, but only one seems to be mounted. I'd like to mount the other ones too, as I have some data on them.
View 1 Replies View RelatedI need to be able to login to terminal and I can't seem to find an easy way to do it from the login screen, or elsewhere that I would normally find in an older version of ubuntu. I need to run fsck with drives unmounted
View 4 Replies View RelatedI have a dual boot laptop Ubuntu 10.10 + Windows XP. When browsing my Windows C Drive in Ubuntu I decided to create a share to the windows "my documents" folder. The problem is that the windows drive is not automatically mounted at launch of ubuntu and as a result I get the following errors:
Code:
Could not find "/media/14F0AD48F0AD30C2/Documents and Settings/Lucas Redding"
and a search box is launched (See Attached Image).
I have tried to look at the Samba and Nautilus settings but I am unable to find any that automatically mount the windows drive.
I've searched high and low, and can't figure this one out. I have a older Olympus Camera (2001 or so). When I plug in the USB connection, I get the following log output:
$ dmesg | grep sd
[20047.625076] sd 21:0:0:0: Attached scsi generic sg7 type 0
[20047.627922] sd 21:0:0:0: [sdg] Attached SCSI removable disk
Secondly, the drive is not mounted in the FS, but when I run gphoto2 I get the following error:
$ gphoto2 --list-config
*** Error ***
An error occurred in the io-library ('Could not lock the device'): Camera is already in use.
*** Error (-60: 'Could not lock the device') ***
What command will unmount the drive. For example in Nautilus, I can right click and select "Safely Remove Device". After doing that, the /dev/sg7 and /dev/sdg devices are removed.
The output of gphoto2 is then:
# gphoto2 --list-config
/Camera Configuration/Picture Settings/resolution
/Camera Configuration/Picture Settings/shutter
/Camera Configuration/Picture Settings/aperture
/Camera Configuration/Picture Settings/color
/Camera Configuration/Picture Settings/flash
/Camera Configuration/Picture Settings/whitebalance
/Camera Configuration/Picture Settings/focus-mode
/Camera Configuration/Picture Settings/focus-pos
/Camera Configuration/Picture Settings/exp
/Camera Configuration/Picture Settings/exp-meter
/Camera Configuration/Picture Settings/zoom
/Camera Configuration/Picture Settings/dzoom
/Camera Configuration/Picture Settings/iso
/Camera Configuration/Camera Settings/date-time
/Camera Configuration/Camera Settings/lcd-mode
/Camera Configuration/Camera Settings/lcd-brightness
/Camera Configuration/Camera Settings/lcd-auto-shutoff
/Camera Configuration/Camera Settings/camera-power-save
/Camera Configuration/Camera Settings/host-power-save
/Camera Configuration/Camera Settings/timefmt
Some things I've tried already are sdparm and sg3_utils, however I am unfamiliar with them, so it's possible I just didn't find the right command.
# mount | grep sdg
# mount | grep sg7
# umount /dev/sg7
umount: /dev/sg7: not mounted
# umount /dev/sdg
umount: /dev/sdg: not mounted
# gphoto2 --list-config
*** Error ***
An error occurred in the io-library ('Could not lock the device'): Camera is already in use.
*** Error (-60: 'Could not lock the device') ***
As i understand, after autofs unmounts disk (network or otherwise) it keeps spinning. It costs energy, so i wonder is there any way to put hard disk to idle state after autofs timeout kicks in?
View 4 Replies View RelatedI have a Pen-drive which is affected by virus. I wish To format it, i tried to format it in GUI mode but i was unable to do so, then i tried to remove the files in pen drive by using rm command but an error msg that the file system has the read only permission so can't be deleted occur, then i tried to remove the read only permission by using chmod command but still the error that the file is read only permission was unable to change.
View 9 Replies View RelatedI am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies View RelatedI have Fedora 14 installed on my main internal drive. I have one Fedora 14 and one Fedora 15 installed on two separate USB drives.When I boot into any of these drives, I can't access any of the other hard drives from the other drivesll I can, but just the boot partitions.Is there any way of mounting the other partitions so I can access the information?---------- Post added at 12:42 PM ---------- Previous post was at 09:34 AM ----------I guess even an explanation on why I can't view them would be good too.
View 7 Replies View RelatedI have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
View 1 Replies View RelatedSo here is my situation..i was using win 7 and ubuntu 10.10 in my dell studio 1555. and i wanted to try out debian so i installed debian in my pendrive. so the grub was modified. when the computer starts it shows debian,ubuntu and win7 no problem.. but if i remove the pendrive, nothing comes up. it shows grub rescue>..
so now i cant start up unless i plug in the pendrive. what to do now to solve this problem?? i want to restore my grub to the previos state.
I have a Centos 5.5 system with 2* 250 gig sata physical drives, sda and sdb. Each drive has a linux raid boot partition and a Linux raid LVM partition. Both pairs of partitions are set up with raid 1 mirroring. I want to add more data capacity - and I propose to add a second pair of physical drives - this time 1.5 terabyte drives presumably sdc and sdd. I assume I can just plug in the new hardware - reboot the system and set up the new partitions, raid arrays and LVMs on the live system. My first question:
1) Is there any danger - that adding these drives to arbitrary sata ports on the motherboard will cause the re-enumeration of the "sdx" series in such a way that the system will get confused about where to find the existing raid components and/or the boot or root file-systems? If anyone can point me to a tutorial on how the enumeration of the "sdx" sequence works and how the system finds the raid arrays and root file-system at boot time
2) I intend to use the majority of the new raid array as an LVM "Data Volume" to isolate "data" from "system" files for backup and maintenance purposes. Is there any merit in creating "alternate" boot partitions and "alternate" root file-systems on the new drives so that the system can be backed up there periodically? The intent here is to boot from the newer partition in the event of a corruption or other failure of the current boot or root file-system. If this is a good idea - how would the system know where to find the root file-system if the original one gets corrupted. i.e. At boot time - how does the system know what root file-system to use and where to find it?
3) If I create new LVM /raid partitions on the new drives - should the new LVM be part of the same "volgroup" - or would it be better to make it a separate "volgroup"? What are the issues to consider in making that decision?
I upgraded from 10.10 to 11.04In 10.10, Nautilus showed all my drives/partitions automatically. The same goes for 11.04, but... all the drives/partitions are also shown in the launcher.Because it gets a bit crowded on the left side, I want to get rid of those drive-icons.I can only open them, not remove them from the launcher, except my external drive (safely remove), but than it also disappears from Nautilus Is there any (easy) way to remove those drives?
View 2 Replies View Relatedi have 2 hard drives showing up on my desk top and when i try to unmount them i get an error
Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount /dev/sdc1 from /media/new movie storage
and
Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount /dev/sdb1 from /media/STUFF
when i try to unmount the other one. now one problem i see is that the labels are wrong the error for /media/stuff came up when i tried to unmount /media/new movie storage, and and the other way around for /media/stuff. also new movie storage is labeled as safe every ware else including inside windows
Earlier I had two physical hard drives in my computer, one with Windows and one with Ubuntu. Now I have a new computer and have installed these hard drives in it. I run Windows 7, and I can find the Windows disk, but not the Ubuntu disk. This doesn't surprise me, as Ubuntu is another filesystem, however, earlier I could format it with a partition manager, but now I didn't even find it with that!
View 9 Replies View RelatedI have installed two hard drives. One is a Sata drive and the other an IDE drive.They are both functional drives. On boot up only the Sata drive shows up. How do I get both drives to boot up together please.The Sata drive has Ubuntu on it and the IDE drive has Fedora on it' I would like to access all of them.
View 3 Replies View RelatedI'm looking for a way to set up a backup with two 2TB hard drives. What I want to do is basically mirror two drives. What ever I copy to the one drive I want it to be "cloned" with the other drive.
Is there any software that could help me with this? Does anyone know of a better to do something like this?
I have a nice computer i have been dual booting between either ubuntu or win7. i am wanting to remove win7 and install winxp sp3, so i can use media center with my xbox. i preferred that win7 work, but since my copy is not genuine, its authenticity is believed to be the culprit in connection errors with the xbox. i have not been able to find a linux alternative, which i doubt even exists due to the proprietary nature of the xbox.
So, my question is how do i reformat the win7 hard drive? are there issues i need to worry about that may reformat both hard drives on accident? and when the hard drive is formatted, will i be prompted to choose which hard drive to install win xp on?
My computer has 2 40GB hard drives (yes, it's really old). One of these hard drives has Ubuntu installed on it, and I would like to use the second hard drive as a data storage device that is usable by anyone who just wants a random place to drop random stuff. How do I do this?
View 2 Replies View RelatedI am trying to install windows 7 over Ubuntu, however when i run the install disk it tells me that my hard drive is not formatted in the correct format. I have then loaded up Ubuntu, tried to re-format using Gparted and it won't let me re-format my hard drive when I right click on it. The only option I get when right-clicking is to unmount the drive.
View 7 Replies View RelatedI have ubuntu 11.04 installed on a 80gb hard drive and everything was running fine. I then installed a second drive (1gb) for storage. It worked fine after a reboot but now it won't boot. I'm pretty sure it's just confused as to which drive is the boot drive. I'm not sure as to how to fix it in GRUB2.
View 2 Replies View RelatedI have seven drives on the dolphin file browser left bar, I don't need them, all of them are system mounted, what I would like is just to have a shortcut or bookmark for one of the drives, how can I do this.
View 2 Replies View RelatedI want to make a RAID5 array with 4 2TB hard drives. One of the drives is full of data so I will need to start with a 3 disks and then once I copy the data from the 4th onto the array, I will then add the 4th drive. This will be my first experience with RAID. I've spent a few hours searching for info but most of what I have found is a bit over my head.
View 9 Replies View RelatedI have a machine that is dual booted with win vista. It has 3 HD's. I created the partitions for the non-bootable drives in windows, ages ago. Prior versions of ubuntu would detect the drives, when I clicked on them in nautilus, I was prompted for my password, then the drives were mounted for the rest of the session. any idea how to mount these drives properly? The documentation linked to above describes ext3 and fat32 file systems (I tried both)
View 7 Replies View RelatedGoing to be setting up a local home server ("headless") for the following:* General file sharing for home network -- a portion of this will be for movies which are accessed via Popcorn-Hour and a second PC hooked to another TV* MySQL storage for home network (bills, misc info, bookmarks, code snippets, etc.)* PHP Server for php scripts i write* SVN* misc Databases for PHP dBase testing (SQLite and Postgre) * Virtualbox* backing up stuffI have a bunch of hard-drives of different sizes, buffer size and access speeds.
Hardware* m/b supermicro X7SBL-LN2* Intel Xeon X3360 Yorkfield 2.83GHz 12MB L2 Cache LGA 775 95W Quad-Core Processor* (2) (8GB in total) Crucial 4GB (2 x 2GB) 240-Pin DDR2 SDRAM ECC Unbuffered DDR2 667 (PC2 5300) Dual Channel Kit Server Memory Model CT2KIT25672AA667
* (known hdd) Western Digital Caviar Green WD10EADS 1TB 32MB Cache SATA 3.0Gb/s3.5"Internal Hard Drive -Bare Drive
What would be the best way to set this up ?OS installed on fast hdd ?Virtualbox on fast hdd ?Movie storage on fast hdd's (mirror raided) ?As for raid, i plan on taking two (1TB) hdd's and mirror them for the movies and two more (smaller) mirrored for backup storage.Im pretty sure i would want the Movies stored on there own hard-drive (faster hdd with more buffer) so not to cause and "lag" incase the server is being used/access at the same time for another use (MySQL access or what ever).Currently the server machine is set-up using VMware which is where the current Ubuntu-server is installed to/on, but now i would like to have Ubuntu as the base and use Virtualbox as means to virtual hosting instead of VMware.
I have been going crazy trying to get Ubuntu 10 installed and working on my G3 B&W. When I boot into the live CD, hit Control-Option-F2 to get into a terminal, then do Fdisk -l, it only shows my CD-ROM. I got 9.04 to install, then updated to 9.1, then to 10, but when I reboot, I get the gave up waiting for root error. Tried typing exit, and changing the wait time to 90. I've spent a lot of time on this, and learned a lot. Anyone no how to get past this?
View 2 Replies View RelatedI currently use Ubuntu Lucid, and I'm curious if there is a program that I can install and run through it which will defragment an external USB hard drive.
My 500GB hard drive is used a lot, and I often add/remove stuff on and off of it, and I'm sure it's slowly starting to get a little fragmented with the amount of deletion and addition I do on it.
Does anybody know of a way to check and potentially defragment just it through linux? Or am I gonna have to just find a windows computer and do it there?
FYI, I don't care to nor know I really don't need to defragment my Ext4 drive to which Ubuntu's installed, its' just the external I am curious about.
Having a little problem with 10.04 installation. I have two hard drives installed on my PC. One that had Hardy Heron and one data. When the install program launches from a CD boot, it fails and drops me to a live session to check out the problem. I can see both drives and mount them but if I then launch the installer, it does not give either as an option for installation.
View 4 Replies View Related