I have recently had linux installed on my computer, but my printer which is a Canon Pixma MP495 is not recognized when the computer searches for it. The 395 is and the 500 is, but not the 495. I need to know what to do. I found a driver by canon which I downloaded. It is sitting in the archive manager but I have no idea what to do with it now and how to get everything working! use easy to understand non-computer person talk with me since I have no idea what I'm doing. Forgive me for my ignorance but applaud me for my desire to learn
PS I DO know how to open a terminal, but after that...
I have managed to install ubuntu server and set it quite nicely to share my files and printers over my network. I have two printers, a Lexmark e232 and a hp C3180 multifunctional printer (i.e. printer+scaner+a copy function). I have no problem installing the Lexmark printer on my windows 7 computers on the network, however, the All in One printer only gets recognized as a printer but there is no way to get it to scan. I have been reading on the web about all in one printers but I don't quite understand what the issues are.
Is there a way for me to get the full functionality of this printer over the network? I think this wouldn't be a problem if there was some sort of software designed by hp that would allow me to add printers that are not directly connected to the computer (via usb) but are shared from another pc on the network.
I have been trying to set up my Brother 5370dw in the network.It recognized easily with the usb, but I sure would like to set it up with my network.I have tried to have it find the networked printer to no avail, and I do not know how one can "force" it to be recognized.
After upgrading to 9.10 HP Printer C7200 is recognized but doesn't work. get message ""printer State" Idle-/usr/lib/cups/backend/upfailed Have tried to rectify without success. as a lot of my use of Ubuntu depends on usable printer.
I have just bought and installed an HP 2050 printer-scanner-copier. The printer works fine, but the scanner is not recognised by Simple Scan or XSane.
Simple Scan states: No Scanners Detected
XSane Image Scanning Program states: No Devices Available
I have Ubuntu 10.10 - the Maverick Meercat installed on my computer.
I have downloaded the hplip-3.11.3a.run file from the HP website but it is still in my download folder and I don't know how to get it from the download folder to my computer and then once that is accomplished, I don't know what to type in the terminal to get this file installed.
Heck, I don't even know if this is what I should install to correct this problem or not.
I have a desktop and a laptop connected by ssh (Places>Connect to Server). This works OK for file sharing but the laptop does not recognize the 2 printers attached to the desktop machine. As I understand (??) it, if the 2 printers are set up as 'shared' in CUPS (as they are on the desktop) then they should be recognized by the other machine on the network. But this is not happening. Is this the right way to network printers?
I am testing to see whether after connecting to an Image on a server with VMware View Open Client I can get it to add a local desktop connected printer(usb). In Ubuntu 10.04 I have made this printer the default and printed a test page just fine, but when I go through VMware to a Windows Image all I can see are the printers that are connected to the local network. need to be able to deploy this to any location and add or see printers on the fly. As when it goes into the field it will be on a Wi-fi card to connect to the Windows Image through VMware. Am I missing a driver, or do I need to add something in the Startup Applications so it see's the printer outside of Ubuntu?
I've been at this mess pardon my french for a few hours and i'm still going nowhere, original thread posted over at archlinux forums:Since my printer isn't visible on my server (works just fine on my client) I tried to manually add various URI (tried em all) and I went from "printer location not found, waiting for jobs, to printer isnt running".
In my opinion it should be working but it's not, i've read the linux printer database/various linux forums/#cups on freenode (idled for 2 days no response)/gentoo wiki/forums and the old tool "google" but most of the "hacks" I tried didn't work.There's a lot of google links with issues similars to my own and alas they are all unresolved, is this a typical problem with unix/CUPS over servers/network?Why is it so difficult for CUPS to detect my printer over my server?
Have installed Centos5 in SUN VirtualBox with Windows XP as host as a safeway to familiarize with Linux.The system works well,except I cannot get my printer to be recognized (Canon MP170),which is working on Windows.Is there any Command line instructions which will fix this,or any other solutions?
Using Ubuntu 11.04 with my Brother MFC-295cn network printer (not wireless). Printer prints, but scanner not recognized. Downloaded the following drivers and installed them using the Software Center:
I have recently installed Fedora 13 on my netbook. I wish to use my HP Officejet via the HPLIP utility. The problem with this is that when I have the firewall turned on, the printer is not recognised at all during setup. When the firewall is switched off, the printer is recognised. The printer in question is an HP Officejet 8500a which is connected via Ethernet cable to a wireless router. I would like to know if there are any network ports (that's used by HPLIP) that I could 'turn on' in the firewall that could let my computer recognise the printer.
I got my Epson stylus NX510 all-in-one printer (just the actual printer worked, couldn't get the scanner recognized) working in Ubuntu Lucid Lynx. I'm currently attempting a dual boot with OpenSuse 11.3, but when I go to download the driver for it like I did in Ubuntu (and it worked) I get the following error messages:
Ive just installed Fed 13 KDE, but my Epson Stylus DX7450, is not recognized and installed. (works fine on Fed 13 Gnome). So i went to Printer Config. in system settings. New printer/ New network printer. where i get an error message "Not authorized - this password may be incorrect". I carry on and input my printer details, but at the end I get another error message, "There was an error during the CUPS operation: 'client-error-forbidden'."
I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
In my system around 73gb(pc-desktop) i have,1 primary partition(windows)-25gb, 1-extended partition(remaining gb) 3 logical partitions were there in (under) extended partition in one of the logical partition is d:drive. in my hard disk d: drive is -/dev/sda5
previosly i was fat -file system , (d:drive-/dev/sda5), i remember i changed the d: drive(d:drive-/dev/sda5) file system to ext4file system ,with following command using terminal
After doing(changing the file system)this one ,i couldnt see the d:drive data
By doing that
1q) Did i reformatted the partition? i think the new filesystem(ext4) has no knowledge of the data that was on it when it had a FAT filesystem.
2q) How to do undo operation,i tried to change the filesystem type to fat/ntfs in terminal using command --sudo mkfs -t FAT /dev/sda5.
Result:its showing text message-'mkfs.FAT: No such file or directory'(not in single quote)
I just loaded octave. I ran through a few examples of how to implement a script file. Everything works until I get to "plot". When I run the "plot" command I get the following.
octave:2> test1.m error: can't perform indexing operations for <unknown type> type sh: gnuplot: not found Just to double check my work, I ran the following code: y=[1 2 3]; plot(y);
I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...
I have a backup HDD with a different distro for my laptop and i can boot into it via external usb or if swapped into the laptop. This HDD/install in question is debian testing and was working fine, the issue arose suddenly. I was first suspecting a failure of hardware somewhere on the motherboard, but the hdd i was using with an external usb adapter also works when installed into the machine. also, the HDD is recognized once i have booted using the external HDD and distro, but it is not recognized by the bios. so i dunno, my first guess is something became corrupt within the testing install, but i guess its also possible that there is some wrong with the HDD but thats not immediately apparent as all the data is still accessible.
Should also note that the HDD with testing on it is also recognized when connected via the external usb adapter, while booted from alternative distro/HDD.
Also. just tried this, but i can get the testing HDD/disto to boot if connected externally. it was going pretty quick, but there i did catch a line about a corrupt filesystem. any commands to run to see what might be going on?? log files to look at?
Ubuntu 10.04 and have a problem with loading the Linux printer drivers for my new Lexmark printer. When I try to load up the printer driver downloaded from the Lexmark site I am asked to enter a root administrator password, but when I enter the password I used to setup the OS it will not accept it. I have reviewed the "sudo" terminal password info, but as I am a newbie I was concerned about wrecking the installation.
I am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.
I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?
I am trying to generic way to convert the string datatype to other primitive data type. To achieve, i used Template . But i getting error and couldn't resolve the issue and error reported is also clueless.
I want to add my printer to ubuntu 10.04. When I run the system-config-printer (System->Administration->Printing) I can't choose the "Add" in the menu bar (ctrl+n does not work either).
