I am trying to get owfs towork reading sensors on a 1-wire network. I have followed several guides I found, but I always hit a problem with the 1-wire directory tha should be holding the data. When I try to read it I get a permission error, if I ls -l I see that the permissions are dand all the other data is ? as well, just the d for directory and the name 1-wire are readable. What could cause this? I have followed [URL]nd a few other bits that I found.this is what I get when I run it
HTML Code:
mick@mick-desktop:/var/lib$ sudo /opt/owfs/bin/owfs -u -F /var/lib/1-wire
DEFAULT: ow_ds9490.c:DS9490_sub_open(555) Opened USB DS9490 bus master at 001/006.
I have been trying to use my DS2490 USB to serial device with a Maxim .DG1921G thermocron with owfs. It is supposed to give me access to a virtual file system for the thermocrom without needing to launch owfs as root.
Code: /var/log/messages gives: Feb 8 16:22:45 norman-HP-G56-Notebook-PC kernel: [ 236.140141] usb 5-1: new full speed USB device using ohci_hcd and address 2[code]....
but if ds2490 module is loaded it works when run sudo.It seems from this that it is a lack of permissions to USB but I have tried all the methods on at http://owfs.org/index.php?page=udev etc. to overcome this and a few others but none work.I am running Ubuntu 10.10 kernel 2.6.35-22-generic #33-Ubuntu SMP
I've done a low level format on them so they're completely empty. When I use them with my windows machines, they're absolutely fine. When I plug them into my Ubuntu machine, there is a hidden directory created called 'RECYCLER' which I'm assuming is for deleted files?However, it also creates a .exe file in this directory called 0x2D9FA278 which has an Icon with an H in it and a comment of 'Facebook Photo' This has the effect of making all the directories on the stick into shortcuts! I googled the file name and it seems to be some sort of Trojan, but I don't understand how it's go into my Ubuntu machine, I've scanned with ClamAV and it finds nothing.
I downloaded a mouse theme form gnome look and installed it in the themes. But it has not appeared in the pointer themes section in custimation even though it said that it is installed correctly.When I drag the file to install it again it says something along the lines of it cannot copy a directory over a directory.Where can I find where the mouse/pointer theme is located and delete it. I have searched filesystem, google and these forums and not had any luck yet.
Recently I mounted a larger partition into my home directory since I was running out of space, Everything went smoothly, but it caused me to wonder about something I cant figure out. While playing with the mount unmount commands when I was copying everything over... before editing my fstab.
Is there a way to access the files that existed in a directory before you mount a partition to that directory? after mount the original files are gone.unmount and they are back, Where do they go?
I want to update all the machines in the network from a central repository which is on my master server and whose archive directory is shared through samba.I searched in the man page of sources.list and found that there is an option for this but can't able to implement this. Can anybody kindly tell me the way to do the same.
I have Ubuntu Karmic. I chose to install with an encrypted home directory. Recently I got a warning that I only had 2GB of drive space left. This is mostly because of my videos. So I went and bought a new hard drive and partitioned it and made 1 ext4 partition and copied my videos all to the new hard drive. I added a line in my fstab to mount the new hard drive to ~/videos, but when I reboot the computer, there is a screen saying something like "error mounting /home/me/videos, press S to skip or something else to reboot". If I press S to skip, then when my system comes up there is a video directory but it's empty because my other hard drive didn't get mounted. I can run sudo mount /dev/sdb video/ and it will mount fine and I can see all my videos, so why can't fstab mount it? Does this have something to do with my encrypted home directory?
It's meant to move old files from my Downloads folder into an archive file (later tar them). The directory exists, I've used $PWD and nautilus and ls to make sure it's there, yet for every file it gives
Code: find: `cp /home/chris/Download/foo.bar /home/chris/Downloads/ARCHIVE/2011-08-19': No such file or directory I tried to test it on a different destination, specifically my home folder. IT still gave me the error.IS it a bad syntax within find or something else? I'm running a 32-bit system with 11.04
I've just installed Ubuntu 10.04, trying out linux for the first time. I'm wondering if it's possible to link my documents folder in Ubuntu to my documents folder in Windows, so that when I open the folder in Ubuntu, I am linked to the folder in Windows.
I have two questions:How do I remove files from Directory A if their name appears in Directory B?How do I move foo.jpg and bar.jpg from Directory C to Directory D if and only if foo.png and bar.png appear in Directory D?I suspect there's probably a bash one-liner for this, but...I can't come up with it.
I have a server with Fedora 13 with which I would like to get NFS working. I have looked up multiple howto's and tutorials, but I'm having a problem not addressed by any of them.Official how-to, another how-to, and another how-to.I have verified that nfs-utils, nfs-utils-lib, portmap, and system-config-nfs are installed and running. I have verified that I have, in fact, shared the directory that I want to share, and that the proper permissions are set.
I had to go through some gyrations to get the Belkin wireless N router to allow my server to have a static IP. However, I can ping the server from the nfs client (a toshiba satellite running mint 8), and vice versa. I have (for now) disabled firewalls on both computers. I think I have disabled SELinux on Fedora 13 (for now).When I attempt to connect to the server from the client, the output looks like this:Quote:
aragorn ~ # mount -v 192.168.2.101:/test /home/kelev/test/ mount: no type was given - I'll assume nfs because of the colon mount.nfs: timeout set for Sat Dec 18 12:21:09 2010
Well, I am facing problem when doing lab questions.
I must use DLXLinux bundled in Bochs (bochs.sourceforge.net).
I am required to use the /usr/local directory.
In /usr directory, there is no directory named 'local' but there is one thing called 'local@'. So, when I try to use mkdir command to create 'local' directory in /usr , there are error "cannot make directory.....".
I have a partition for all my data (mounted on /mnt/data) and I want to point my /home/<username>/Pictures folder to /mnt/data/Pictures. I.e. I want to point a folder to another folder.This isn't possible with fstab as I've understood, since that's about mounting volumes. I guess the mount command can be used, but I'd like to mount the directory permanently and I'm not aware of if that's possible with the mount command. Maybe a soft link can be a solution, but that doesn't feel like a "clean" solution. Then I have to enter the /home/<username>/Pictures directory and then click the soft link?
I'm facing a little trouble with copying a .txt file(only) from a directory and subdirectory to another directory. -R command don't work I think if I want to do this, since I don't want to copy subdirectory.
Ubuntu server recently had issues with a disk. fsck seemed to correct everything, but I have one directory that I can't delete, chown, chgrp, chmod, etc.
Here's the listing for the directory dr-x-wxrwt 2 16709 25134 8192 2020-08-23 22:34 UDLEDATB.DBF
Note the sticky bit is set and the uid is a number that does not appear in /etc/passwd.
Even as root, any attempt to delete, chmod, chown, etc. gives "Operation not permitted".
Since sticky bit on a directory restricts delete to the owner and the owner is invalid, I am stuck. I need to delete this directory.
I am curious if mounting a directory inside an already mounted directory is considered safe? I have done this on an Ubuntu server before but never thought to ask if it could cause problems.An example:
/dev/mapper/Raid5-VMStorage on /var/lib/libvirt/images /dev/mapper/Raid1-SpareStorage on /var/lib/libvirt/images/Workstations
Code: mkdir: cannot create directory `/dev/cgroup/cpu/user/5900': No such file or directory bash: /dev/cgroup/cpu/user/5900/tasks: No such file or directory bash: /dev/cgroup/cpu/user/5900/notify_on_release: No such file or directory It seems like it's probably from this part of .bashrc:
[Code]...
What does this code do, why, and what's causing it to go wrong?
i want to copy a few files from my windows directory into the wine directory - its no big deal, just a few preference files so i dont have to set something up all over again. trouble is, i had the files copied, but i cant find the wine/ c: drive directory anywhere, anyone know where this can be found??
I want to run a cronjob every 15 minutes that checks a directory for files. If the directory contains more than ten files I want it to send an email to me.
All I have is this...
*/15 * * * * ls -l | wc -l | [filename] | mail -s "This is just a test" [email address]
I would rather not write a bash script. Is there an easier way to do this? I was looking into some commands like find and grep.
I'm quite new to linux but I have configured a simple ftp server and it's working great. I have a FTP-Shared folder with upload and download subfolders. Under upload's and download's I have identical category subfolders like mp3's, movies, software etc. in both. As the guy's upload, I would like to create a line crontab where I can move all the content under /FTP-Shared/upload/mp3/* older than 14 day's to FTP-Shared/downloads/mp3/ recursively (Like in cp command), but the timestamp must be searched on the first directory and not sub files example: /mp3/Club Dance/CD1/Hallo world.mp3This is how far I got:[root@clients ~]# /usr/bin/find /FTP_Shared/upload/Mp3s/ -depth -mindepth 1 -mtime +14 -type d -exec mv -f {} /FTP_Shared/download/Mp3s/ ;This command moves the directory and files, but it is not recursively
When I run "ls -al somedir*" (I use the "ll" shortcut, actually), Linux not only list files that match, but also the contents of directories whose name also happens to match.Is there a way to limit "ls" so that it will only show names (files and directories) and ignore the contents of the directories?
After i try to find logfiles follow date/month/year. i want copy this files to another directory with name's directory is time you find(date/month/year).
I'd like to mount the directory /var/www/mysite to the directory /home/daniel/mysite, but also have the user of the mounted files mapped from the original user (www-data) to my own user (daniel). So that the file /var/www/mysite/index.php who's user is www-data will appear in the mounted directory as /home/daniel/mysite/index.php and be owned by daniel - and alternatively, if I create a file /home/daniel/mysite/test.php with my own user, it will be created in the original directory under the user www-data Is it possible? If not, what alternatives do I have so I can use an IDE and still make sure all the files belong to the HTTP server's user?
I am in my current directory. I want to copy a directory somewhere else into this current directory. Lets say I want to take it from direc1/direc2 and the directory I want to take is called demo.
Code:
That is what it shows in the man pages, but when I do that, it says cp: no match
I m having a RHEL-5 sever.ABC directory size is 57GB after taking backup in the same disk with name ABC.bkp showing 56GB. i used below command to copy/backup. # cp -r ABC ABC.bkp (different sizes after copying)..I checked both the directory sizes by #du -sh <ABC> and du -ks <ABC.bkp>In both GB and KB there is lots of difference (200mb). why this will happen in copying? what is the solution for above question? what is the correct way of copying 1dir to newdir exactly?
I'm using OpenSSH 5.5p1 on Fedora 15. I'm trying to get a chrootDirectory to work. Specifically trying to figure out why I can't write files to a sub-directory of the chroot directory. I created a user test_user and created a group called sftp. I added test_user to the sftp group. I edited /etc/ssh/sshd_config as follows:
Code:
Subsystem sftp internal-sftp Match group sftp ChrootDirectory /home/sftp_users/%u X11Forwarding no
