General :: Cronjob Directory / Send An Email If Directory Contains More Than Ten Files?
Oct 13, 2010
I want to run a cronjob every 15 minutes that checks a directory for files. If the directory contains more than ten files I want it to send an email to me.
All I have is this...
*/15 * * * * ls -l | wc -l | [filename] | mail -s "This is just a test" [email address]
I would rather not write a bash script. Is there an easier way to do this? I was looking into some commands like find and grep.
i have CentOS 5.2 based server running openssh, which gives sftp service to the outside users(from internet), the users from some public ip-addresses uploads and download files from sftp-server directories. I want that whenever a user uploads a new file in certain directory of server, the server should send me an email alert
Would like to know how can I put a daemon on Debian 5 that can send e-mail when the content of a specific folder change, if not possible, at least how to send a daily e-mail with the content of a specific folder.
I would like to make a cronjob who makes a tag.gz of everything inside a directory in a recursive way. BUT there is a HUGE directory full of jpg's. I don't want this one in the backup.Additional points if it can backup symbolic links.
I'm quite new to linux but I have configured a simple ftp server and it's working great. I have a FTP-Shared folder with upload and download subfolders. Under upload's and download's I have identical category subfolders like mp3's, movies, software etc. in both. As the guy's upload, I would like to create a line crontab where I can move all the content under /FTP-Shared/upload/mp3/* older than 14 day's to FTP-Shared/downloads/mp3/ recursively (Like in cp command), but the timestamp must be searched on the first directory and not sub files example: /mp3/Club Dance/CD1/Hallo world.mp3This is how far I got:[root@clients ~]# /usr/bin/find /FTP_Shared/upload/Mp3s/ -depth -mindepth 1 -mtime +14 -type d -exec mv -f {} /FTP_Shared/download/Mp3s/ ;This command moves the directory and files, but it is not recursively
If I have a directory /foo with a few files in it, how do I symlink each entry in /foo into /bar/? For instance, if /foo has the files a, b and c, I want to create three symlinks:
Some of my cronjobs are filling up files in my / directory. How do I make this stop? One of my cron jobs uses wget:[URL].. The bexcb0.php file writes a file and then echos a result if it is sucsesfull. These echo results are being put into bexcb0.php files in my /root folder and are piling up.
My / folder is filling up with files bexcb0.php etc bexcb0.php bexcb0.php.1 bexcb0.php.2 bexcb0.php.3 bexcb0.php.4 bexcb0.php.5 etc How do I make this stop? If I just remove the echo will they stop writing to the / folder?
How would i go about copying files to a directory, yet skip the files that already exist in the directory, and also remove the files that are in the directory. For example:
Code:
$ls /dir1 img001.jpg img002.jpg
[code]....
Now i would like to copy from dir1 to dir2, but the contents of dir2 would be:
Recently I mounted a larger partition into my home directory since I was running out of space, Everything went smoothly, but it caused me to wonder about something I cant figure out. While playing with the mount unmount commands when I was copying everything over... before editing my fstab.
Is there a way to access the files that existed in a directory before you mount a partition to that directory? after mount the original files are gone.unmount and they are back, Where do they go?
i want to copy a few files from my windows directory into the wine directory - its no big deal, just a few preference files so i dont have to set something up all over again. trouble is, i had the files copied, but i cant find the wine/ c: drive directory anywhere, anyone know where this can be found??
When I run "ls -al somedir*" (I use the "ll" shortcut, actually), Linux not only list files that match, but also the contents of directories whose name also happens to match.Is there a way to limit "ls" so that it will only show names (files and directories) and ignore the contents of the directories?
After i try to find logfiles follow date/month/year. i want copy this files to another directory with name's directory is time you find(date/month/year).
I am using my media server as my podcast collector. I am in the process of learning the ins and outs of NFS so i can mount a NFS directory and transfer my podcasts from server to player. For now i am using scp to transfer podcasts from server to desktop then to player. The problem is the path to the directory of one of the podcasts is /home/user/gpodder-downloads/The BILL&TIMMY Show Podcast.
whenever i try and run my scp command it fails because it thinks that TIMMY is a script i want to run in the background. I have tried to back-slash escape the character, i've tried single quoting and double quoting the character and i still get the same problem. as it sits now i have to move all podcasts to another directory and then transfer them to my desktop...but i would like to transfer the podcasts without un-necessary steps.
There are millions of files in many directories. Wherenver i try rm * or find or use xargs, they say 'argument list too long' and exit. How can i deleted files in a directory with so many files without deleting the directory itself.
I have two questions:How do I remove files from Directory A if their name appears in Directory B?How do I move foo.jpg and bar.jpg from Directory C to Directory D if and only if foo.png and bar.png appear in Directory D?I suspect there's probably a bash one-liner for this, but...I can't come up with it.
I'm using OpenSSH 5.5p1 on Fedora 15. I'm trying to get a chrootDirectory to work. Specifically trying to figure out why I can't write files to a sub-directory of the chroot directory. I created a user test_user and created a group called sftp. I added test_user to the sftp group. I edited /etc/ssh/sshd_config as follows:
Code:
Subsystem sftp internal-sftp Match group sftp ChrootDirectory /home/sftp_users/%u X11Forwarding no
I have uShare 1.1a setup to talk to my XBox 360. If I share a directory that has no subdirectories, the video files display on the XBox. However, most of my files are in sub-directories on a different partition - I don't really want to copy them to the share, but uShare doesn't seem to recognise any sub-directories or files contained therein.
I have tried setting up symbolic soft links directly to the video files (although this is a pain, it is better than moving the files)...
Code: ln -s /home/jonftp/TV-Shows/Buffy/Season-1/Buffy-101.avi /home/share/Buffy-101.avi ...but these don't show up on the XBox either.
How can I get uShare to "drill down" the directory structure to list the files or how can I get uShare to follow symbolic links?
In my Windows environment, I use email client such as Microsoft Outlook to connect to our email server to send email with the following configuration:
Incoming server (POP3): 995 - (requires with SSL) Outgoing server (SMTP): 465 - (use encrypted connection SSL)
[code]....
And the mail server requires user ID login and password.how do I setup a text command based email client in my Linux (Centos 5.1) to send out email through the existing email server above, which is in another machine? The email client has to be text command based because I need to use command line to send notification email from anothar application installed in my Linux (Centos 5.1) Since the email client will only be used to send email notification, I don't require setting up of an email server in my linux.
Well, I am facing problem when doing lab questions.
I must use DLXLinux bundled in Bochs (bochs.sourceforge.net).
I am required to use the /usr/local directory.
In /usr directory, there is no directory named 'local' but there is one thing called 'local@'. So, when I try to use mkdir command to create 'local' directory in /usr , there are error "cannot make directory.....".
I've just installed Ubuntu 10.04, trying out linux for the first time. I'm wondering if it's possible to link my documents folder in Ubuntu to my documents folder in Windows, so that when I open the folder in Ubuntu, I am linked to the folder in Windows.
I'd like to mount the directory /var/www/mysite to the directory /home/daniel/mysite, but also have the user of the mounted files mapped from the original user (www-data) to my own user (daniel). So that the file /var/www/mysite/index.php who's user is www-data will appear in the mounted directory as /home/daniel/mysite/index.php and be owned by daniel - and alternatively, if I create a file /home/daniel/mysite/test.php with my own user, it will be created in the original directory under the user www-data Is it possible? If not, what alternatives do I have so I can use an IDE and still make sure all the files belong to the HTTP server's user?
I am in my current directory. I want to copy a directory somewhere else into this current directory. Lets say I want to take it from direc1/direc2 and the directory I want to take is called demo.
Code:
That is what it shows in the man pages, but when I do that, it says cp: no match
How can i auto mount more than directory in the same directory ? i want to automount 2 home directories in the /home and still be able to enter the other home directories !
The problem that i've another account on the system with home directory joe when the user1 home directory auto mounted i become unable to enter joe home directory !
I'm using Mac OS X's Terminal.app shell to compile and run Fortran programs. One such program resides outside of my home directory (it is in the Applications folder, which resides on my hard drive but seems to be outside of my home folder). How can I navigate into this directory using Terminal.app to run the programs that reside there?
