I just installed 9.10 and the only options for resolutions is 800x600 and lower on my Samsung 22". I would like to have the resolution at 1600x900. My graphics card is NVIDIA 6150.
View 7 RepliesMy AOC TFT22W90PS1 LED screen is 1920x1080 resolution. That' ok. but not all resolutions in nvidia-settings can work and show a black screen(not support). the most important is 800x600, many games need and use it as default. I do not want install those driver named xxx.run. so how can i get it works. nvidia-settings version is:
[Code].....
I tried to add my wife , and when I put in a password for her, this error comes up."Please set a valid user name consisting of a lower case letter followed by lower case letters and numbers." I did all that and I still can't set a password for her.
View 3 Replies View RelatedSo I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
View 1 Replies View RelatedI use a 17" laptop with a 22" secondary monitor running Ubuntu 10.04 LTS. The res on the laptop screen is 1440x900 (16:10) and the secondary monitor mirrors this. Problem is that because the secondary monitor aspect ratio the display is somewhat distorted. It's not so bad that it is unreadable but I work in IT so I am at my computer for around 8hours a day so it wear thin after a while.
Is there a way for me to set different resolutions on each screen? The laptop have an ATI Radeon Graphics card and cannot change the Resolution above 1440x900 even within ATI Catlyst control center.
I'm running Kubuntu, OS Version: Linux 2.6.35-28 generic KDE SC Version: 4.5.8
I have a large monitor, and the max resolution of KDE (1280 x 1024) doesn't fill the screen. That seems rather small for a max resolution. Is it possible to get a larger one?
Under system > preferences > monitor I can select either 640 x 480 or 800 x 600 or 1024 x 768 which are all 4:3 aspect ratios, as my screen is 16:9 everything looks stretched. How can I set a 16:9 aspect ratio screen resolution?
View 5 Replies View RelatedAfter struggling with this for 2 days and getting nowhere, I found this simple solution.
1. Download packages http://ajoliveira.com/ajoliveira/gen...it_9.10.tar.gz and http://ajoliveira.com/ajoliveira/gen...rg.conf.tar.gz.
One of these contains the driver files and the other a xorg.conf file.
2. Extract the 2 archives by double-clicking on them.
3. Copy the xorg.conf file to the /etc/X11 directory code...
I am running Ubuntu 9.10 on an HP laptop with an Intel 82852/82855 GM/GMC Graphics controller. I have a 2nd monitor attached to the VGA port (HP f1703). The problem is that the two screens have different resolutions. the laptop is 1280 x 768 and the other monitor is 1280 x 1024. The xorg.conf file that was created with Xorg -config set both monitors up with 1280 x 1024 resolution so my screen on the laptop looks all "squashed". I have tried to reconfigure it using the Display Preferences dialog but after i re-boot, both screens are unviewable and I have to restore my previous xorg.conf file. I went through the HOWTO: Jaunty Intel Graphics Performance Guide procedure to setup a "safe" configuration but didn't work and I had to restore my "good' xorg.conf file. What do I need to do to setup my two screens with the correct resolutions: 1280 x 768 and 1280 x 1024?
Here is the video portion from my "good" xorg.conf file
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
[Code]...
I have recently installed Ubuntu 10.10 on my computer. The default display driver supplied with it only allowed the screen's default resolution (1280x1024), so I downloaded and installed nVidia's latest driver (260). When I change the resolution to anything lower than the default, the graphics (and most notably letters) everywhere appear slightly blurry, becoming more and more blurry as I lower the resolution. The blur is not terrible, I can still use it but it becomes annoying to watch after a while. I am using a GT240 graphics card, and this problem does not exist on Windows using the same resolution and same driver version.
View 4 Replies View Relatedgot new lynx on notebook problem: cant see the lower end of windows, so i can't see what i'm klicking on...
View 2 Replies View RelatedI am running a Ubuntu install in Virtual Box; however, the max. res 800x600. My card and monitor will go higher, but the option is not available. Where can I manual state that I want 1280x1024 and 32bit reolution? I looked in the /etc/X11/xorg.conf file; however, I was not sure what to change. I reviewed the same file on another machine, which is not in a Virtual issue, but the file only provied very generic entries, and did not have any detialed information that resembled 1280x1024 or 32 bit.
View 9 Replies View RelatedI'm trying to add a higher resolution to my system. I've tried to edit xorg.conf but I think I'm wrong. Everytime I edit and reboot, it tells me I need to run in low graphics mode for now. Now I'm trying 'xrandr.' I was able to create a new mode just fine, but when I try to add it to the appropriate output, I get this:
Code:
prog@ubuntu:~$ xrandr --addmode LVDS1 1280x1024_50.00
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 149 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 25
Current serial number in output stream: 26
Here's what xrandr returns:
Code:
prog@ubuntu:~$ xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
VGA1 disconnected (normal left inverted right x axis y axis)
LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 286mm x 214mm
1024x768 60.0*+ 50.0
800x600 60.3 56.2
640x480 59.9
TV1 disconnected (normal left inverted right x axis y axis)
1280x1024 (0x111) 109.0MHz
h: width 1280 start 1368 end 1496 total 1712 skew 0 clock 63.7KHz
v: height 1024 start 1027 end 1034 total 1063 clock 59.9Hz
1280x1024_50.00 (0x112) 89.4MHz
h: width 1280 start 1352 end 1488 total 1696 skew 0 clock 52.7KHz
v: height 1024 start 1025 end 1028 total 1054 clock 50.0Hz
I don't know why it puts it in TV1. There's two of them because I tried two different refresh rates.
Linux Ubuntu 9.10 (karmic), Nvidia g-force 5200, Intel(R) Pentium(R) 4 CPU 2.80GHz(old PC but i need learn Linux inside out b4 I go 100% Linux)But I have taken the time to the learn the basic cmds like man mv cp apt-get install etc. I cisco engineer but I want to get good with Linux distro's.I have a NVIDIA G-FORCE 5200 which according to NVIDIA'S website the 173.14.x.x driver is the correct one.I have tried diver 173.14xx. I installed it manually and restarted x server.
I have read the installation guides on this forum but to no avail.When I reboot Compiz cube features are working BUT my screen goes 640x350.I tried to edit the /etc/X11/ xorg. conf file but I cant see any screen resolutions lines. I tried changing NV to nvidia and visa versa. Still the screen is buggered.I installed compiz checker and ran it it said all ok. My text goes large the colours are jittery ? When I go to NVIDIA XSERVER SETTINGS i can not change the screen res ? It just stops from selecting the options? I also tried driver 185.18xx and the same results.I also tried installing the drivers with Envy NG and still no better.I now have installed 96.43.13 NVIDIA driver and my screen has went back to normal but I can not enable the cube effects. I take this means it has reverted back to the graphics card on the motherboard? I have also looked at xrandr -s <1014x768> cmd to manually change it and again no avail.
I lost the higher resolutions for my computer. The highest available is 1360x768 (which doesn't work well) and currently I'm using 1024x768. Before, I had 1280x1024 working well and I even had higher resolutions available in nvidia-settings. I've ubuntu 9.10 with nvidia drivers (185.18.36).
I've read [URL].. but not necessarily all of it or understood all of it. I've tried dpkg-reconfigure xserver-xorg and the xrandr stuff but nothing has changed, except what xrandr reports, regarding the addition of two modelines 1280x1024. In the end, I suppose something has corrupted some file but how can I figure it out?
Code:
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1280 x 1024
default connected 1024x768+0+0 0mm x 0mm
1024x768 50.0*
800x600 51.0 52.0 53.0
680x384 54.0 55.0
[Code]...
My screen resolution for the computer is 1600 x 1200 which is what I want but for my internet the resolution changes to something like 800x600. It happens in firefox in ubuntu and it happens in explorer 8 in vista. I just used clonezilla about a week ago. Now this is what is happening on the new cloned drive?
View 1 Replies View RelatedI have a collection of *.mkv files which are 720 HD resolution (1920x720). I'd like to watch them on my netbook, but it can't handle HD content. The videos play fine on any decently-powerful desktop, under either Windows XP/7 or Ubuntu, but they are simply too much for the Atom CPU of the netbook.Is there a way to downconvert the .mkv files to something the netbook can handle? It doesn't have any problem with standard DVD content, which is of course lower resolution. Cutting HD content down to the netbook's native resolution(1024x600) would probably be sufficient.
A free software package available in the repositories would be great, but I have no problem manually installing something if necessary. I have not done any work with converting videos to different formats, so I don't know what's out there for Ubuntu.
I just installed Kubuntu 10.04. My monitor support up to 1680x1050 resolution but Kubuntu allows me to only choose up to 1360x768. How can I fix this?
View 1 Replies View RelatedAfter upgrading from 10.10 to 11.04, I find that I can not successfully set the screen resolution of an external monitor to 1280x1024, for instance. The screen draws blocks of graphics in strange places & doesn't seem to erase properly. This screen resolution worked in 10.10, as did all the display options. However, now that I've upgraded only resolutions of 1024x768 & lower work OK. Is this is a bug in 11.04? My hardware: Dell Inspiron Mini 10v, Intel Atom CPU N270 1.60GHz, 1GB RAM
View 3 Replies View RelatedI generally suspend between work sessions. Occasionally, after a long time of running, my display goes black and is unresponsive. This seems to happen when I have fallen asleep while working. Now, I don't think someone has sneaked in and done something to my computer! Anyway, all the applications are still running (observed by bringing up the console, top/ps) but the X session does not respond. I have tried the Control-Alt-Backspace keystroke that is suggested for restarting X Window.
Over several times, I have experimented with killing specific processes from the console to see if I could restore life to the session, without having to shutdown. Today I noted that if I blast the compiz process it did come back. Of course, there may well be a specific combination of steps I did before that step that resulted in it working.
I have two monitors of different resolutions. Under settings->display the settings for my monitor look like this: [URL]. Ultimately what I want is to set up this kind of configuration: [URL]. But whenever I do, it doesn't work out. When I up after setting the above settings, my configuration ends up like this: [URL]. Any attempt to change the resolution or to change the display type to anything other then clone is simply ignored. If I disable the second monitor I can set my first to the proper resolution. If I try to set the settings to what I want they will stick but the second monitor doesn't actually turn on, and if i try to drag windows that direction it acts like a single display.
I have tried using the ATI control panel to adjust my display, but there seems to be a problem entering it as an administrator.I can load the CCC just fine as a regular user, but when I try as an admin a terminal pops up, I type in my password, and nothing happens. I want to avoid trying to reinstall my display drivers or do anything drastic. In previous versions of linux I would just nano the Xorg.conf file and be done with it, but it seems ubuntu 10.04 LTS doesn't use Xorg, or at least not a Xorg.conf I am used to. I want to set the monitors at their native res and as independent displays, similar to what twin view did for me not to long ago.
How to lower the resolution of all the images in a pdf? I searched around and couldn't find an answer to this. I have a pdf file of a textbook that I use in school but each page is an image of 2 pages of the textbook (left page, right page when the book is opened) and each image is of a very high resolution. I downloaded pdftk and pdfedit but for such a simple problem, I'm having trouble. Is there any way to do this?
I have tried converting the 380 MB PDF file to PostScript but after an hour of doing that, it stopped, and the PostScript only had about 17 pages instead of the 733. So converting it back to a PDF file to utilize pdftk's algorithms would have been worthless. I know I could split up the pdf file into sections but I'd rather just scale down all the images, or make them mid quality PNGs or high quality JPGs just so the filesize can be halved.
I need to run fsck on my Ubuntu 10.04 machine, but when trying to enter lower runlevel (with init 1), computer freezes with error message "could not write bytes broken pipe". So, how I can fix this and/or check my disk with fsck?
View 1 Replies View RelatedI installed 10.04 1st by making a partition with bootcamp on MacOSX.Then I formatted the partition according to Ubuntu's instructions. I didn't install rEFIt, because I prefer to just hit the alt (option) key.I made the necessary adjustments according to URL...Community Ubuntu Documentation - and everything seemed to be working fine.I upgraded to Maverick and everything seemed to be working fine aswell.But then I noticed, that the wireless signal keeps failing and I'm asked to put the password again and again..
I don't think this is due to the upgrade from 10.04 to 10.10, but I just noticed it recently, maybe because of the air humidity, the signal was stronger a few days a go.. don't know!!Is there anything I can do?Perhaps install a new driver, or another wificlient, like Wifi-Radar??
How to change the mode value for '800x600'?
View 2 Replies View RelatedI have just done a clean install of 10.04 and cannot for the life of me set the resolution higher then 800x600 When I go to change the resolution I am greeted with a unknown monitor.
lspci | grep -i vga
VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 01)
Here is the Xorg config file I have configured
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
[Code].....
I just got a new vVidia card for its HDMI capability for my mediacenter and installed the nvidia drivers suggested by the hardware managers.
Right now im connected to a VGA input on a sharp TV, this card/driver like my previous embedded intel card/driver can't make heads or tails of this TV. Intel called it "unknown' nvidia thinks its a CRT (/laugh at a 42'' CRT) so the resolutions it sticks me with are laughable.
Before i used to use xrandr to add a 1600x1400 resolution (though my goal is 1960x1080, full 1080p, i just cant run that through a VGA input) and all was... acceptable.
Now i can no longer do this, since nvidai drivers seem to dominate my attempts. I have gathered i should be able to alter my xorg.conf (which i used to not have, this machine started at 9.10 which is trying to get away from that file) to support som additional resolutions. But i swear i am all thumbs when it comes to touching that file... it always ends with a command line crawl to revert to my backup
SO, anyone know what needs to be altered with this file OR any other method i might try?
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009
[Code]....
I just upgraded to an ASUS MS227 on a Ubuntu 9.10 box with a "NV34 [GeForce FX 5200] (rev a1)" video card. Here's the problem, the only two resolutions it will work in is either 1900x1200 OR 1440x900. Anything in between shoves the display about 5 inches to the left, so far over that it's not correctable by the monitors own horizontal control.
This is my xorg.conf:
Code:
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
SubSection "Display"
Depth 16
[Code]...
This is 10.04 LTS 64-bit. I took all the modern stuff out of the computer, so I should be cool to make the system displays work right with just a single nv 9800gt adapter and just two displays a Viewsonic 1920x1080 and a samsung 2048x1152.
When I first installed, both monitors had the right resolution but the wrong monitor was primary. That appears to be extremely difficult to solve, with none of the options I found working for me, so I just swapped the cables.
After that change, the proper monitor is primary, but the other monitor is now stuck at 640x480. I googled and binged and slapped and blew and sucked and none of the magic lines to put into my xorg.conf have worked - in fact, I'm finding the best solution might be to put together some command lines with xrandr (which only sees one display FWIW) that do what I want, and then run those each time I start up the OS. I'm willing. I can type fast and I have a good memory.
I THINK I'm looking for the magic line I put into my /etc/X11/xorg.conf to get that display rotated 90 degrees. If CW is harder than CCW, I'll re-mount the display if needed. I can be flexible. A higher resolution would be GREAT as well, but I came into the world at 80x24, I can leave it the same way - thing is, seems like soemtimes, if the moons are aligned, I don't need it at all?
If the real solution is to re-install, that's fine, but I'm going to be back here again, with much more cynicism when I buy a new monitor.
Here is my xrandr output:
Code:
:~$ xrandr --prop
Screen 0: minimum 320 x 175, current 2688 x 1152, maximum 2688 x 1152
default connected 2688x1152+0+0 0mm x 0mm
2048x1152 50.0 156.0
1920x1080 51.0 52.0 53.0
[Code]....
first time poster after having read gobs of threads trying to find the answer to my issue here. I'll try to post as much information as I can, and then will supply whatever else is inevitably left out and deemed necessary. I'm running 10.10 on a Gateway MX3701 laptop which has an ATI Radeon Xpress 200M graphics controller (lspci | grep VGA) and am hooking it up to my Samsung P2770HD monitor/TV via VGA (VGA-0 port if that's important).
So, the issue: In resurrecting my old laptop by killing XP and putting on Ubuntu, I found I needed a VGA cable to connect to my monitor. Borrowed a friend's to get my setup going, and all was well in 1920x1080 with all the other monitor settings working well too (laptop monitor off, etc.. When my new VGA cable (cheap from Amazon) arrived and I shutdown, made new connection, and rebooted, my monitor was no longer recognized (it was before) and I am limited to weak sauce resolutions meant for my blinding grandmother.
So I've tried to find similar issues on here and have struggled to do so. I did find one thread that was similar, but the issue was never resolved.