i have been dreaming of using linux for years and finally got the courage to do it today but i'm stuck with 1 thing ... i had to install ubuntu 10.04 using my onboard video adapter.. as swiching to my nvidia card was screwing up the install... !! so i did so ... but now ubuntu is installed but i cant find a way to install drivers for my agp... here are my spec's from . . "lspci -command"
[Code]...
I think this is a bit of a complicated problem so bear with me while I explain it. I'm using an HP Laptop with Ubuntu 10.10. The laptop has the touch buttons for mute and volume up/down, and I use them all the time (at least when I was on Windows). I've very recently switched to Ubuntu and now those keys are causing problems with a game called Minecraft. Basically, when I'm playing it and use those keys, it brings me out of full screen (if I'm using fullscreen) and then seems to mute like it should, but the problem is, it doesn't UNmute when I press it again. The lighted button on the laptop goes back to showing its unmuted, but the game still has no sound. I've tried messing with the sound settings inside the game, and doing all these weird combos of when I mute/unmute and all, nothing seems to help. I usually have to restart the computer to fix it, but then if I use the button again, it does the same thing.
P.S. does anyone know of a way for these buttons to NOT interrupt full screen? I had the same problem with it interrupting fullscreen apps on windows, but then I used a program called 3RVX and it fixed it. Is there anything like this on linux?
i have 512 mb ram and i am running ubuntu 10.04.i had set up 2gb of swap while installing. i want to remove the swap with screwing up my ubuntu.
View 8 Replies View RelatedCan I safely remove 1 distro without screwing up the other? I have Linuxmint as secondary and ubuntu as the last.I want to replace ubuntu.If I just delete the partitions/format and install my other os which is OpenSuse 10.03 will this work.will opensuse see linuxmint and make grub understand?
View 1 Replies View RelatedI need windows because iscan under Ubuntu does not work well. So I have a dual boot. Trouble is that windows is only good for a month because I can't validate it because I have it on another machine also.
So, my month is up and I can not longer access windows. I could do a complete wipe and reinstall windows and then put Ubuntu next to it but that is a lot of work. Can I just reinstall windows and get my boot loader to operate properly again? Or is it actually easier to do a total wipe out and reinstall? I have tried to restore grub before and I failed miserably.
I am having trouble with Flashplayer 10.1 d51 screwing up the colors on a lot of videos, .....,etc. It is really strange and hard to describe. it makes the video almost like it has a pink curtain over the video and only able to see outlines of the video subject matter. When the scene changes, it while sort of clear and then spread again. I can boot into Ubuntu 9.10 and can play the video just fine.
It doesn't do it on all videos. But, it does it quite often. Plus, I have another Slack 13 system with S3 Virge that plays the same videos just fine.
Slackware 13
Nvidia drivers
Nvidia GeForece 4 MX
1. Evince is somehow screwing up font creation when displaying dvi files. I can preview the dvi file fine under xdvi. When I try with evince, I kicks off a slew of metafont font-creation runs, then shows me totally garbled pages -- the layout is correct, but none of the characters are right. This happens for documents that primarily use Times Roman fonts.
2. *Every* time evince comes up, it insists on starting in continuous / "fit page width" mode. I don't want either one. I want continuous-mode*off* and the window in the "best fit" view. So I have to click, drag, click, click, drag, release *every* time I pop up a file. It's very annoying. There doesn't appear to be any key in the gnome gconf config database I can set to affect these things. How do I fix this?...
i have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
I have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
I just installed a minimal version of Ubuntu 10.10 (with Openbox) over 10.04. Mainly everything's ok, but I have three problems:
1. When shutting down or rebooting, my speakers make a loud pop. Upon googling around, I found this topic on the Arch forums. Running
Code:
Before rebooting/shutting down works. I, however, would like to have this permanently fixed so I don't have to run these commands every time before rebooting/shutting down.
2. I can't install the ATi video card drivers. I downloaded the correct driver (10.9) from the ATi website and made sure I had the packages found here installed. I also made it executable by running
Code:
When I run the installer, using
Code:
I get this output:
Code:
3. When booting, I get a message saying something like "intel_ips can't find i915 symbols, so graphics turbo is disabled". When googling for this, I see this is a kernel related issue. Since I don't have any understandings of kernels, I thought this is a little too high up for me. What does it mean and how can I fix it, as it slows my boot down quite a bit?
How can I install the video card of this netbook with widescreen resolution?
View 4 Replies View RelatedI am currently running all my applications off a HD as I was unable to install the grub bootloader on my ocz pci express card (grub won't install on the pci express card as it is a raid0 array). I would like to use the HD for backup only and run everything off the ocz card - with the exception of booting (which is unfortunate but I didn't manage to make the pci express card boot). How is it possible to tell suse during the installation to create the /boot on the HD and the rest on the pci express card and also to allocate the remainder of the HD as empty storage area??
View 1 Replies View RelatedI've been using Suse on my 7 year old computer for years but now have a shiny new Dell Inspiron 570 MT with AMD Athlon? II X4 630.I thought that I should try the 64 bit version of Suse 11.2 on the new machine and it now dual boots, but I have an ethernet problem.Yast tells me:NetLink BCM57788 Gigabit Ethernet PCIe (Not connected)BusID : 0000:02:00.0Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details.I searched for 'eth' in dmesg output without success but found 'net' in this section:
[ 0.380308] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.380310] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.380401] NET: Registered protocol family 2
[code]...
I've recently purchased a HP 210 Mini. I've installed Ubuntu Netbook Remix through Wubi but have found to be ridiculously unreliable as the Update Manager always freezes!
I've reinstalled 4 times now and still no luck. So I assume that it will be better to install the .iso from the site. However my computer doesn't have a disc drive, so I wonder if there's a way to install Ubuntu from there, I mean it works for a USB drive.
It's a geforce 9500gt 1Gb 128bits. How can i see if it's working or not? And where can I find a driver to it? I've looked in the geforce's site and i've downloaded a file with the extension .run, but this file didn't work. What should i do? Core2Quad, 4GBram, geforce 9500gt 1Gb 128bits, asus's motherboard, hd 500gb sata. Ubuntu 9.10 64bits.
View 6 Replies View RelatedI just got a Macbook air and only have a 128 gb ssd and would like to install ububtu on a 8 gb class 6 sd card to conserve space.
View 2 Replies View RelatedI have been trying to create a SD-Card with Ubuntu 9.10 and add up some other programs. That has to be all done in my laptop. However, I got into a point that I could not go further. Normally, I would start my Linux SD-card on a board and type the following lines: Code: $sudo apt-get install liblapack-dev $sudo apt-get install libf2c2-dev Is there any way that could be done from my laptop once the SD card is connected to it?
View 6 Replies View RelatedI bought a new sound card for 9.10 and it said it was linux compatible, the mini_DVD produced the following code...
View 9 Replies View RelatedMy new pc doesn't have a cd rom so I have to use a memory stick, usb hard driver or a SD card. So how do I install ubuntu? For some sh'itty reason I got windows vista installed here which is more frustrating then everything else I have tried.
View 8 Replies View Relatedtrying to install the software for my wireless usb card, but when I put the disk in the drive the icon comes up. When I click on it has a bunch of different option, and one of them is setup. When I double click it, I get this message: Archive: /media/cdrom0/setup.exe zip file size: 4611104 bytes, number of entries: 29842 [/media/cdrom0/setup.exe]: Zipfile is disk 39299 of a multi-disk archive, adn this is not the disk on which the central zipfile directory begins. Cdisk(3569.
View 5 Replies View RelatedOkay first off I'm a noob with Ubuntu. I've been trying to get Warcraft 3 and WoW to run on ubuntu via Wine, so far I managed to get them installed and running but I always have problems with graphics (poor rendering as oposed to when I ran them on windows). So I figured that maybe the graphics card/driver aren't installed correctly.
On the terminal I got this information: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02) I checked System > Administration > Additional Drivers When it finishes searching for drivers I get the message "No proprietary drives are in use on this system" (I have no idea what this means, I read elsewhere that I should check this) So um, I don't know If any of this is useful or necessary to fix my problem.
I need help installing graphics drivers for my nVidia 8600GT.
View 3 Replies View RelatedI use Ubuntu 10.4 or 10.3 (How do I find out)I'm trying to install the drivers for my wireless card (I don't know what hardware I use) I'm running on a Compaq Laptop 6735s and I was told to use this This site tells me to pick either a 32 bit or 64 bit, I don't know which one I am. so I can run off my wi-fi internet?
View 6 Replies View RelatedI am completely new to linux so a lot of this has been foreign to me. I have ran the lspci command to find out my wireless card is Broadcom Corporation BCM4313 and I found the driver for this card at:it won't let me post the URL for some reason...but i googled "Broadcom BCM4313 driver for linux" and it's the first link.I downloaded the 32-bit driver but now I have absolutely no idea what to do.The download has folders named lib and src, and a text file called Makefile.
View 3 Replies View RelatedHow do i install a intex TV tuner card
I am very new to ubuntu and only know to use a little of it.
I have a intex tv tuner card with FM.
how do i add this as my hardware
i wa earlier using windows XP and i also have drivers for XP and inter video Win DVR application for viewing TV on XP.
But on ubuntu how do i see TV and how do i install the card.
How do i install intex tv tuner card (PCI ver 2.1) on ubuntu 9.01 I have installed myth tv my problem is which card do i select i selected Analog card and MJPG as well but when i go to scan for channels says FAILED TO OPEN CARD.
View 1 Replies View RelatedI'm trying to install Ubuntu 9.10 to a Compact Flash card. It's not going very well. I have a 4GB USB drive that I want to install from. I can boot from this USB drive and get into either Ubuntu itself or the installation program only. Either way, I've tried to install it.
My Sandisk Extreme IV 4GB 45MB/s compact flash card is detected in my BIOS and shows up during the installation as well. Whenever I try to finalize and start the installation it gets to 15% and then gives an error on how it can't mount the file system.
I've tried every file system available. Funny thing is, I can use gparted to format the card to ext2. It then shows up on the desktop as a drive. If I go into that drive, there's a folder called lost+found. If I try to enter that folder it complains about permissions.
Is there any special trick to installing onto a compact flash card? I've tried with every file system available, with and without a swap file partition as well. I have quite scarce experience with Ubuntu and Linux in general so this is incredibly hard. But I wont give up that easily!
Second thought: If I can't get this working, would it be just as OK to run it as a "live" distro on the CF card? The motherboard is an Intel D945GSEJT. Using 1 gig ram.
I got the native driver for linux already but just don't how to do it. It is an external wireless usb card, it's from Ralink.
View 4 Replies View RelatedI am attempting to make a video machine only... which mean I have a Compaq 6435cl and I have installed the latest verion of ubuntu on it. All I want this machine to do is play video from off the net on my LCD HD TV. The video on board was all choppy when going into full screen mode so I put in a 3dfx Voodoo card and the same thing happens. I cannot figure out how to install the drivers for this card in ubuntu so I was wondering if I should by a new video card. Do you have a recomended video card for ubuntu that would push HD video?
View 2 Replies View RelatedI installed ubuntu netbook remix (the new version 10),and when I try to install drivers for my network card it says I need an internet connection,when I cant access the internet,I even tried using a wired connection (since I usually connect via wireless),but still its no use. My netbook is the following: [URL]...
View 1 Replies View Related