I tried to upgrade my pc from 9.10 to 10.04 version with the alternative cd as the update manager was not showing the new release. There were some problem in installation and the process stopped somewhere. Then, when I tried with the update manager I got some error.
View 9 Replies
I was having a problem with a fresh 11.04 install and the VPN software I use for work. I found the fix was to upgrade the software, so I downloaded an RPM, converted it to .deb and installed it via dpkg. The install worked and the VPN software now works, but Package Manager says I have a broken package and wants to 'upgrade' to the older broken one. How can I fix this without breaking my VPN SW again?
View 1 Replies View RelatedI've only been using Linux for a few days (Specifically - I installed Ubuntu 9.10 last week on my laptop for learning the OS and updated to 10.04 over the weekend). I have searched Google (and found answers) for every problem now except for this new one. I apologise in advance for the length but I wanted to include my own troubleshooting as well.
When I installed and setup Ubuntu Karmic - I added my work software. Autopackage wasn't installed by default so I used terminal's package install <filename> command for the first file - and double clicked on the rest to install.With the OS change I wanted to check to see if these packages would have problems installing on 10.04 (mostly to double check).First I checked my Manage 3rd Party Software to remove them - but all my entries here are blank. (I should have quite a few actually - I've done a lot of installing and downloading in the last few days).I double clicked to re-run them but that failed saying there was a problem with the packages. So I swapped to Terminal and found the following:
When I try to install a software package:
sudo package install "SMART Product Drivers 10.package"
Reply: package: can't open config file /home/test/.mailagent
If I type in just
[code].....
What's interesting, is checking my Fedora and Debian builds (I've done a lot of learning for only a few days! But I know a ton about grub 1 and 2 now) - I can't see a /home/test/.mailagent file or folder to copy either. The only thing I can think of is I have never setup an email account on my system (I've only been using it for a few days) and maybe the blank Manage 3rd Party Software tab is indicating a different problem.
I've have major problems installing cinelerra.
So, I tried to uninstall it.
I messed up at some point. Now, most apt operations result in errors.
At the moment, this is what I get when I try apt-get -f install:
Code:
Is there any way to fix this, or is my package managment permanently broken?
I just want to get to the point where apt isn't returning errors, because at some point I will want to upgrade to 10.04. This is just too risky with broken apt.
so i just installed ubuntu 10.10 from CD. After restart the Update Manager windows poped up and downloaded 21 updates.. but i can't install the updates because "The package system is broken.." [URL]
it's a fresh istall i didn't installed nothing i didn't do nothing
When I run sudp apt-get -u upgrade (or use upgrade manager). I get the following error.The package libhttpcore-java:i386 is not ok and I don't know how to fix it!On another note I am running x64 so the i386 is throwing me off.
View 7 Replies View Relatedi am Ubuntu rookie i installed the following package onboard (Simple On-screen Keyboard with macros and easy layout creation) when i try to uninstall it using Synaptic Package manger i get the following error.dpkg: parse error, in file '/var/lib/dpkg/status' near line 26430:invalid package name (character `|' not allowed (only letters, digits and characters `-+._'))and when i try to configure it get the same error any help msi@msi-desktop:~$ sudo dpkg --configure -a dpkg: parse error, in file '/var/lib/dpkg/status' near line 26430: invalid package name (character `|' not allowed (only letters, digits and characters `-+._'))using Ubuntu 10.4
View 1 Replies View RelatedI just installed brother DCP-350c drivers from here
When I finished I tried to install a scanner driver from brother.
My package manager is broken.
The page mentioned something about that here(just a scroll down)
I tried what they said but the manager is still broken.
It gives me this error report code...
i'm running debian lenny - latest stable i have recently installed smartcam (mobile phone as webcam over bluetooth) from .deb package , get errors of unmet dependency , but application works like a charm, unfortunately broken dependences block my aptitude , i cant fix them either as latest stable use older versions of dependences even in backports... how do i mark smartcam package as not broken and release my apt?
View 8 Replies View RelatedI'm fairly a newbe. Synaptic tells me I have a broken package: kdebase runtime It tells when repairing:
E: /var/cache/apt/archives/kdebase-runtime_4%3a4.2.2-0ubuntu1.1_amd64.deb: poging tot overschrijven van `/usr/lib/kde4/libexec/kdesu', wat ook in pakket kdesudo zit in english Try to overwrite what also in the package kdesudo I can not repair it. Now I can not update anything.
So I tried to download adobe flashplayer from a site I'm not sure of, and it didn't install flashplugin-installer. My pc always bugs me about having a broken packet and i'm not able to download anything else because of it. I've tried for a long time now and visited like every site to try to get rid of it. It says "E: flashplugin-nonfree: Package is in a very bad inconsistent state - you should reinstall it before attempting a removal."
When I try to delete it in system package manager. And it says I need to do this "This package is a transitional package that can safely be removed after you installed flashplugin-installer." I can't find where to install this and when I did think I found the link I try to type my password for terminal and it just says sorry, try again for some reason. I got ubuntu yesterday so I am new to this.
So i upgraded from 9.10 to 10.04. when i ran update manager after the install, it had some stuff for OpenOffice and during the update it hung. I powered off the laptop and turned it back on, booted into ubuntu and tried over but it didn't list the updates again.
View 8 Replies View RelatedI'm trying to install sid but debootstrap if failing due to bug #581420. I understand the fix is simple but how can I bypass/patch the broken util-linux package that gets downloaded at install time? I'm using the daily d-i business card CD.
View 2 Replies View RelatedAm trying to upgrade from karmic 9.1 to lucid 10.04 and have the problem that as part of the upgrade I get a report that some packages are broken. As suggested posting the relevant files APT and MAIN Logs from the /var/log/dist-upgrade below.
View 4 Replies View RelatedI started an upgrade last night (from Jaunty to Karmic) using a "do-release-upgrade" command on a remote server via ssh. However, this morning, I discovered that the ssh connection between my machine and my server was broken.
I can see that the do-release-upgrade process is still running (well, a giant /usr/bin/dpkg is in the process list) and waiting for a response.
Is there any way I can take control of that session from my current session?
I've been trying all morning to update from a working 9.10 to 10.04 and unfortunately every time I try it blocks me.
An unresolvable problem occurred while calculating the upgrade: E:Unable to correct problems, you have held broken packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
Restoring original system state
I've uploaded the full apt log to pastebin here:
[URL]
I took the distribution upgrade from the update manager and can't boot now. Boot into a Live CD (ver. 9.10 - does that matter?), and go through the following steps.
ubuntu@ubuntu:~$ sudo fdisk -l
Warning: invalid flag 0x0000 of partition table 5 will be corrected by w(rite)
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000ad56f
[Code]...
Anyone have an idea here? I have searched a lot and have only found a few references to this issue. Does the invalid flag message relate here? The partition is flagged as 'boot'.
Here is the apt.log from running 'do-release-upgrade'. apt-get upgrade runs without issue and I have disabled all of the extra repos I had (opera, tor, lucid-propsed, chromium). My system is otherwise 100% up to date with apt-get dist-upgrade and apt-get upgrade. I have already purged all of my PPAs using 'ppa-purge', but it looks like there are remnants of xorg-edgers in there somewhere: [URL]
View 4 Replies View RelatedI have been upgrading 10.4 to 10.10, but in the middle of the new package download my computer turned off (outage). Now Ubuntu won't restart the upgrade or install the packages already downloaded; it tells me it "Could not determine the upgrade" and that unresolvable problems occurred, caused by held packages. How can I reset things to restart the upgrade?
View 4 Replies View RelatedI keep on getting this red " - " icon on my panel and I try to perform the upgrade it prompts me to do. But it says that there are 3 broken packages i need to fix with the "broken filter". How do I fix this so I can upgrade?
View 2 Replies View RelatedUpgrade of kubuntu to 11.04 from 10.10 using kpackagekit appeared okay, as did the reboot and login from the new panel. Then, instead of seeing my custom background and plasma desktop all I see is the color wash of the Unity background. There is a right button menu in this desktop with a Create Launcher option that allows me to make launchers for konsole, firefox, and ksystemlog. Windows come up, but with Unity window decorations. Sure enough unity-window-decorator is running, but there is no plasma. System logs don't reveal anything obvious that failed. There is a kdm process running and kdeinit4 appears to have tried to start klauncher and kde4, but they are not actually running.It seems like somehow GNOME and Unity have somehow collided with the KDE environment.
View 1 Replies View RelatedAfter upgrading my laptop from 10.10 to 11.04 I can no longer connect to my home wi-fi. It was working flawlessly for months before the upgrade. The network manager just keeps spinning and nothing happens.dmesg output just keeps showing this over & over again:
[ 1721.748149] ipw2200 0000:03:03.0: PCI INT A disabled
[ 1721.820199] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 1721.820204] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[code]....
"Select windows when the mouse moves over them" does not work after an upgrade. I'm still using the Ubuntu Classic desktop configured for Metacity. Anyone know how to fix this without resorting to Unity?
View 1 Replies View RelatedAfter upgrading a 12 core Opteron hypervisor to the latest Lucid LTS patches, virtualization is broken. guests will not start using virt-manager.
The error message I get is: failed to retrieve chardev info with 'info chardev'
A couple of days ago, I upgraded my Kubuntu to Lucid. In this phase, the system reported that it was impossible to upgrade samba-common, and the installation aborted on 90%. Nevertheless everything is working but KPakageKit, which reports:
"There are broken dependecies on your system. Please use an advanced package manage e.g. Synaptic or aptitude to resolve this situation."
Neither "sudo aptitude safe-upgrade" nor "sudo apt-get -f install" solved the problem:
omen@darkstar:~$ sudo aptitude safe-upgrade
[..]:
samba-common
kubuntu-desktop .....
So the problem is really samba-common.
Last night I upgraded to Lucid from Karmic, and now I can't play any DVDs (physical or ripped). These worked fine in Karmic, but now when I select them, playback freezes on any menu, and I have to kill the front end process. Mythtv is set to use the internal player, but I have the same issue with VLC.
View 4 Replies View Relatedpreviosuly installed products that mapped keys, but I dont have and have never had any of them. reset the keyboard to default settings, which I happily did to no avail.
So for me, since I upgraded, keyboard input (either local or via VNC, so it isnt hardware) does nothing for either the caps lock key or the shift key. Kinda makes it imnpossible to eneter @ or any uppercase character, for example !
apache2: Syntax error on line 204 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/mods-enabled/php5.load: Cannot load /usr/lib/apache2/modules/libphp5.so into server: /usr/lib/libxml2.so.2: undefined symbol: gzopen64 Have been running ubuntu server for about 6 months on a rickety but reliable AMD1.2GHz laptop (hp compaq nx9005) Had successfully deployed a UPS and various CGI scripts. Familiar with the basics of apache tomcat and even dabbled with some mods. All was running sweetly until I performed an upgraded yesterday which took me to Kernel (from uname -a) 2.6.31-22-generic-pae #70-Ubuntu SMP Thu Dec 2 00:54:52 UTC 2010 i686 GNU/Linux
During the upgrade there were libraries which apache2 depended upon and the process halted. Have brute forced some other libraries - given there were 87 packages in the upgrade and it had got to 78 - I did not dare roll back - so pursued further until I finally noticed the message above
[Code]...
I recently upgraded to Fedora 14 from F13 using Yum, it worked to my amazement except now yum appears to be broken because of a massive amount of dependency issues. It appears the old F13 packages are still around and yum is unable to get ride of them because their dependency with F14 packages of the same name. I tried yum distro-sync, and I tried yum resolvedep $(package-cleanup --orphans) --skip-broken but to no avail. Package--cleanup--orphans identifies all of the left over F13 packages.
I also can't install or upgrade anything using Yum, does give me a reason except the massive amount of dependency issues with the left over F13 packages. When I use the graphical software update it tells me among other things that Yum and RPM have updates but of course it won't update. I did follow the instructions and used yum update yum before I upgraded to F14, maybe it didn't take? Anyway to resolve this issue other than a clean install?
I was running Ubuntu 9.10 on my HP G70 laptop and did an upgrade using upgrade manager to Ubuntu 10.04.
Since I haven't been able to get wifi connection or wired working. The Network Manager applet is missing from the notification area and if I try to run nm-applet manually it says it is already running. I tried killing the process and then running it manually in the terminal and although the process appears to be running it is missing from the panel.
Booting into the live cd has the applet working fine so something in the upgrade process must have failed.
I tried changing the theme to see if it displays in other themes but had no luck.
I also tried to log into kde but kde seems to be broken. When I log into it after the splash screen all I get is a black screen with only my mouse pointer.
