I am at work right now and noticed my blog is down because of a database connection error. phpmyadmin wont load either it says theres an error, and webmin wont load either. So what would cause a mysql to go down? a hack or update? i am running ten.o four ubuntu server.
View 3 RepliesI am running Ubuntu 9.10 with Apache, phpMyAdmin and MySQL. Normally phpMyAdmin loads properly, but the other day I created a large database of 6,000+ tables and 1.3 GB of data in the entire database. Now phpMyAdmin loads and shows my different databases, but if I try to open the new large database, it just loads a white page with no content. Does anyone know if I can reconfigure my server so it will be able to show parts of the database?
View 2 Replies View RelatedI have installed on a remote server phpmyadmin 3.3.1 and mysql 5.1.46 on a centos 5.4 OS.
Any newly created user with phamyadmin is unable to login both from mysql command line (from localhost) and phpmyadmin (localhost and remotely).
No prob when the user is created with mysql command line (from localhost). All of the users created with phpmyadmin, are not "visible" recognized from the show user command via the mysql command line. The setting I used when I create any user was the same as the ones with the mysql command line creation.
The error message I get when accessing from mysql command line (from localhost) is the following: "Access denied for user ... @localhost (using password: yes)"
What commands can be used to install software such as "phpMyAdmin" to Fedora? As I am setting up Apache in Fedora. How to install "phpMyAdmin" and setup phpMyAdmin, so that I can use internet explorer to manage the phpMyAdmin to configure the MySQL database remotely.
View 2 Replies View RelatedI have a centos 5.5 machine. First I upgraded my php to php 5.3. So I was then installing phpMyAdmin so I just put the whole folder into my /var/www/html/phpMyAdmin.The I tried to run my phpMyAdmin and I got this error Cannot load mysql extension. Then I uinstall my mysql db and reinstall it. Again it show me the same error.For addition info via the php info page for the Configure Command I saw this option -without-mysql' .
View 5 Replies View RelatedAfter a new install of Slackware 12.2, I carried out the following procedures to get everything working successfully right out of the box. The server is a standalone system, used for testing and educational purposes, so please bear that in mind. NB: Throughout this post when you see a single # at the start of a line it means you are typing the commands as root user. You should not include the #, only the text after it.
### setup Apache with php enabled
Login as root user on your Slackware box and type:
# pico -w /etc/httpd/httpd.conf
[code].....
how to connect to mysql database using php in Apache on Ubuntu?
View 4 Replies View Relatedhow to configure a web/database server.
Given:
IBM x3650 M3 with 6 x 300GB SAS and 16GB RAM CentOS 5.5 (LAMP) Software RAID with LVM haven't tried hardware RAID.
Here's the task:
Task 1. 3x300GB SAS will goes to /boot, /root, /var* and swap (RAID1 for /boot and RAID5 for the rest with LVM). Task 2. 3x300GB SAS will goes to MySQL Database (RAID5 and LVM). * My web content will be stored here. (/var/www/html)
I know how to perform Task 1, but I'm not familiar with Task 2. So how it can be done? What specific directory should i used to store my database?
I've setup a CentOS apache web server, and loaded a site onto it. The site previously was functioning under windows xp (before I "stepped in") and wamp. What I did was copy the site in /var/www, reconfigure the httpd.conf (DocumentRoot /var/www/site, etc). Although when I try to open the webpage I get this error: Database Error: Unable to connect to the database:The MySQL adapter "mysql" is not available.
[code]...
I have two VMs, one as a web server and one as a database server. Both are RHEL5.2 Web server httpd-2.2.3-22.el5_3.1 php-5.1.6-23.2.el5_3 Database server mysql-5.0.22-2.1
On the web server, I can connect to the database just fine with a user I created with all privileges on *.*
Both phpMyAdmin and Drupal, though, tell me they cannot connect to the database. phpMyAdmin says :#2003 - The server is not responding..Drupal says:Failed to connect to your MySQL database server. MySQL reports the following message: Can't connect to MySQL server on '172.16.1.1' (13).However, I can also connect to the database with a simple little PHP test script.What do I need to do to get these apps to see the database that is up, running, available, reachable, in existence, etc. etc???
I logged in phpmyadmin as root (with password that I just created in terminal), old databases are there but I have no privileges to create a new one.
View 1 Replies View RelatedI have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
I'm having problems connecting to the mysql database on my system. I first noticed this when I was trying to set up the program anymeal. I subsequently tried using MySQL Administrator (mysql-admin), but had no luck. It gives my the following feedback:
Code:
Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Click the 'Ping' button to see if there is a networking problem. I press the ping button, and it seems to connect.
Code:
How do I create a new mysql user and a mysql database at the shell prompt?
View 1 Replies View RelatedPam-mysql can not connect to the database and below are my configurations.
saslfinger -s Output:
root@mailbackup:/# saslfinger -s
saslfinger - postfix Cyrus sasl configuration Tue May 10 10:12:10 EAT 2011
version: 1.0.2
mode: server-side SMTP AUTH
-- basics --
Postfix: 2.7.2
System: Slackware 13.1.0
-- smtpd is linked to --libsasl2.so.2 => /usr/local/lib/libsasl2.so.2 (0x00007f74ebfb7000)
-- active SMTP AUTH and TLS parameters for smtpd --
-- listing of /usr/lib64/sasl2 --
-- listing of /usr/local/lib/sasl2 --
-- content of /usr/lib64/sasl2/smtpd.conf --
-- content of /usr/local/lib/sasl2/smtpd.conf --
-- active services in /etc/postfix/master.cf --
-- mechanisms on localhost --
I have the latest LAMP running on F10 but need to do a database conversion from mysql 4.1.22 to mysql 5 for a client.
View 4 Replies View RelatedI have 2 Servers
Server A running apache, php, phpmyadmin
Sever B running MySQL
Server A has IP of 192.168.1.110
Server B has IP of 192.168.1.120
I edited /etc/phpmyadmin/config.inc.php
To have these:
(This par was confusing to I just re-added the line above instead of searching for it all).
Then I set the MySQL vi /etc/mysql/my.cnf to comment out #bind-address = 127.0.0.1
There is another line that most of the guides asked me to comment out but I cannot find that like: # skip-networking
The Next closest match to that is: skip-external-locking
I will assume that is not it and leave it alone....
I keep getting errors for example: "Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly"
Another error was it canno connect because it is not accepting connections from the IP Address of my webserver...
The original issue started when i couldnt login to phpmyadmin. I noticed an error when installing it and when trying to login, my credentials that I supplied upon install failed. After ages of messing around trying to reset I decided to try and uninstall phpmyadmin and MySQL and start again. This has produced more issues as I uninstalled MySQL first and phpmyadmin asks for credentials that are in a database, which I have already deleted. This causes major issues trying to uninstall it. Anyway, I have used all these commands:
sudo apt-get remove phpmyadmin
sudo apt-get remove mysql-server
sudo apt-get remove mysql-common
Now I am trying to install everything again but having erros. This is what I have so far:
Code:
root@ks358041:/var/lib/php5# sudo apt-get install mysql-server-5.1
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
I been going off old outdate guides and informaion around the internet and nothing is working
I have 2 Servers
Server A running apache, php, phpmyadmin
Sever B running MySQL
Server A has IP of 192.168.1.110
Server B has IP of 192.168.1.120
[Code]...
(This par was confusing to I just re-added the line above instead of searching for it all).
Then I set the MySQL vi /etc/mysql/my.cnf to comment out #bind-address = 127.0.0.1 There is another line that most of the guides asked me to comment out but I cannot find that like: # skip-networking
The Next closest match to that is: skip-external-locking
I will assume that is not it and leave it alone....
I keep getting errors for example: "Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly"
Another error was it canno connect because it is not accepting connections from the IP Address of my webserver..
One server is a dedicated MySQL server. After upgrading that one to Ubuntu 10.04 (from an ancient Suse 9.2), both servers are running Ubuntu 10.04 LTS.I have another server that I use to administer the database server via phpMyAdmin. However since the upgrade it is not able to connect. I get an error #1130 Cannot log in to the MySQL server. The same happens if I try to connect remotely from the command line with: mysql -u root -h 129.79.137.121 -pI'm not sure if this is an iptables/ports problem or a configuration problem on the MySQL end or something else entirely.I've searched and tried the suggestions I've found in various places but none seems to have fixed it.
View 2 Replies View RelatedHow do I connect to the MySQL server using phpmyadmin?It's asking me for a username and password and I was not asked for a root password when I installed MySQL (unlike in Windows).I tried no password, I tried root as a password, I tried$ mysqladmin -u root -p blahEnter password: mysqladmin: connect to server at 'localhost' failederror: 'Access denied for user 'root'@'localhost' (using password: YES)'Nothing I've tried is working obviously.Why does this have to be so stupid? Why couldn't MySQL ask me what password I want to use?
View 2 Replies View RelatedI'm totally new to MySQL / PHPAdmin and have been dropped in at the deep end regarding getting MySQL and phpMyAdmin upgraded... When I look at the RPM's I see:
php-mysql-4.2.2-17.2
php-4.2.2-17.2
php-imap-4.2.2-17.2
php-ldap-4.2.2-17.2
But when I go to the GUI I see: Welcome to phpMyAdmin 2.5.7-pl1 MySQL 4.0.16-standard-log running on localhost as root@localhost So to start with I'm not totally sure what version I'm running! I need to get these upgrades done due to PCI requirements so they are saying to upgrade to at least 4.0.25 I'm currently running RedHat9 so ideally need to know the easiest way to upgrade to a later 4.0 or 4.1 version.
I just install Ubuntu on a new computer I got, and set up LAMP. I started poking around in MySQL (more than I should have) and managed to break it. I've been trying to fix it, but I can't. I've done apt-get --purge mysql-client, but when I reinstall it it's the same thing. How can I reinstall MySQL (and PHPmyadmin) from a completely clean slate? (There's no important data on there)
View 1 Replies View RelatedI am just configuring my PC for learning php. If I install phpMyAdmin from rpm, it works however if I download it manually and put in /home/user/public_html/phpMyAdmin and then browse [URL], I just see a blank page. What is the reason?
View 7 Replies View RelatedI've downloaded and installed Apache, mySQL and PHP via YAST. The web server is up and running and I am able to create and modify databases in phpMyAdmin. What's strange is that I am working on some other websites which use php includes to deliver my stylesheets, scripts etc. However, these includes do not work. I can view my website but all I see is the output from the html within the php file. Anything that is being delivered through includes does not display or run so all my content is unstyled.
View 3 Replies View RelatedSo the problem is that phpMyAdmin does not want to connect to host name (at remote server) but connects to that same server fine if it's ip address is used. Command line "mysql -h hostname ..." works fine and connects to host name. Mysqladmin also works.
it's giving error:
*****
Error
MySQL said:
#2005 - Unknown MySQL server host 'host.name' (2)
******
I've disabled SElinux and temporarily disabled Iptables but no luck.
Somehow I feel MySQL is not doing DNS lookup when used by Apache/PHP. So it just understands ip addresses.
I found that on MySQL startup you can disable DNS lookup. [URL]
Not sure if it's disabled and how to enable it at startup. Could not find anything at "System" -> "Administration" -> "Services".
Here is similar case with no solution [URL]
My phpmyadmin stopped working. I reinstalled it and it gives error #2002. I found that this error is from mysql, which i couldn't repair and i begin to reinstall it. First I was with Debian 5.03, but i played with /etc/apt/sources.list and after upgrading
I have now 5.05
The problem is that when i install mysql-server a dependency appear in mysql-server-5.0. I follow this instructions[url] and after sudo apt-get install mysql-server mysql-client
I get this error:
Code:
How can i fix this dependency? I didn't find anything relative in google.
mysql-server-5.0 --configure gives error: command not found
I uninstalled all related with mysql and execute dpkg --purge mysql-server then reboot and run first apt-get install mysql-server-5.0 mysql-client-5.0 and then apt-get install mysql-server mysql-client There was no error
Code:
But there was another error when run mysql -u root -p
Code:
I was trying to change table data in a mysql database. Phpmyadmin appeared to work ok but somewhere along the line something got screwed up. When I try to start Phpmyadmin now it quits in the middle of loading. Firebug underlines something that says 'mooRainbow undefined'. I've tried to apt-purge Phpmyadmin including dropping the php database and then re-installing it. It does the same thing even when I went from version 3. something to version 4. something. This leads me to believe there is something wrong somewhere else. I don't have a clue where to even start looking!
View 3 Replies View RelatedSummary: Does a discrepancy between MySQL client library 5.0.x and MySQL server of 5.1.50 cause "inconsistent behavior", as reported by phpMyAdmin? The longer version: Windows Sysadmin taking the plunge into Linux. I tried to spare you all the rookie questions and did a fair bit of reading. I'm rather happy I was able to get CentOS 5.5 installed and running, configured iptables, got the kernel updated, Apache, MySQL and PHP installed. Then upgraded PHP to 5.2 after I figured out how repos and priorities work.
I got phpMyAdmin installed and running, then decided to upgrade from 2.11 to 3.3.7 but it keeps complaining that my MySQL client libraries are something like 5.0.63, while my server is 5.1.50, and this may cause "inconsistent behavior" or something of the like. So, feeling industrious, I decided to find an updated client.
MySQL-client-community-5.1.50-1.rhel5.i386.rpm
But it wouldn't let me install it as it conflicted with the default mysql-server installation. I also couldn't remove just the old client, to update to a newer one. So I blew away everything mysql on my server and installed the above client
MySQL-server-community-5.1.50-1.rhel5.i386.rpm
and that server file. I'm assuming I'm missing dependencies now as phpMyAdmin claims it can't load the mysql extension. Attempting to 'yum' php-mysql tried to install 'mysql' as a dependency, which immediately conflicted with the files I'd installed. At this point I'm wondering if I'm closing in on successfully installing a version that phpMyAdmin doesn't complain about, or if I should even care that it is complaining and just go back to all the repo versions of everything.
# rpm -e MySQL-shared-community-5.1.50-1.rhel5.i386.rpm
error: package MySQL-shared-community-5.1.50-1.rhel5.i386.rpm is not installed
I have installed phpMyAdmin on Fedora 11 using YUM, along with MySQL, PHP and Apache. The web and database servers are operating fine. However, when loading the web page [URL]... a box appears asking for a username and password. I have tried many combination's including the root with no success. What value does it want, or what setting is wrong. In studying the file httpd.conf in somehow loads the file phpMyAdmin.conf
[code]...