Ubuntu :: Missing All Effects And Portion Of Screen
Nov 22, 2010
I was playing with Compiz on my netbook and installed Fusion. All was well until I rebooted it and now I am missing all effects and a portion of the screen. I am purged compiz and reinstalled it to no avail. I did mess around with the outputs and changed 640x480+0+0 to 1024x600+0+0 but have no changed it back attempting to fix my issue. I have attached an image of the current situation. Basically, I am trying to get my compiz running again with all its sexiness.
View 6 Replies
ADVERTISEMENT
Nov 10, 2010
I was browsing and then a pop up window came up and all my display got resized randomly for a few seconds. Finally,the lower third of my monitor is total black and useless.The taskbar and dock is still visible at the bottom though but above it is total black.All my compiz settings are gone too!I have tried win7 and everything is fine there.I have tried to adjust monitor settings but nothing changes.
View 1 Replies
View Related
Feb 25, 2011
I have a laptop with a cracked screen. the crack is not very serious, about an inch and a half on the right. I can still use my laptop but it is hard to see information in the cracked area.
My question is how can i set up ubuntu not to use that portion of the screen, sort of tricking it into thinking that the display is essentially 1.5 inches shorter on the right than it really is.Perhaps setup x11 differently?
View 7 Replies
View Related
Dec 12, 2010
I have a laptop of which a large part of the screen is broken (shows garbage). Fortunately the broken area is a clean rectangle, the bottom 1/3 of the screen or so.
The laptop is running Ubuntu 8.04, but I plan to reinstall it with 10.10. The graphics are provided by an Intel 915GM or something in that direction.
Knowing this, do you know of a way to tell the system about the broken part of the screen, so it will simply not use it? I don't really care whether it's done at the hardware, X or window manager level, though as low as possible is preferred.
View 1 Replies
View Related
Apr 30, 2011
I just installed ubuntu 11.04 last night. I noticed most of my effects were missing so I tried to put them back on. This didn't work so I disabled the effects. Then, my panel at the top and the Launcher is missing. .How do I get these back?
View 6 Replies
View Related
Feb 8, 2010
And we are unable to restore the setting because the button to click on to do so is outside of the viewable screen! Also we have lost the start bar/dock at the bottom of the screen and cannot figure out how to get it back.
View 1 Replies
View Related
Jun 12, 2011
I long while ago (when I was in collage) I used VIM a bit. I have not used it since and would like to get back into using it. I remember there being a way to split the screen within VIM to show common commands on the bottom portion of the screen. I've searched a while and cannot find how to set this up.
View 1 Replies
View Related
Sep 18, 2010
I havent used Ubuntu in a while, so I get version 10.04.1 and when I get compiz, I am missing lots of compiz effects. Like fire, 3d windows, changing how many side are on dektop cube. The skybox doesnt rotate with the cube, when it should.
View 1 Replies
View Related
Jun 19, 2010
I just installed 10.04 Lucid.There were some animation effects in the compiz config settings manager which were to add extra features such as burn,glide and a whole lot now they are not in this compiz any ideas?
View 8 Replies
View Related
Dec 3, 2008
I'm in openSUSE right now, and I have the Compiz fusion settings manager. However, the Desktops Effects application is missing from System > Look and Feel. Is there anyway I can get it back, as I currently do not have any effects enabled?
View 6 Replies
View Related
Oct 14, 2010
Whenever I try to change desktop effects to anything other than none, a window appears saying 'Searching for driver' then the screen flashes and it says effects could not be enabled. Here's the output from System Testing Compiz test: Gathering information about your system. Distribution: Ubuntu 10.10 Desktop environment: GNOME Graphics chip: ATI Technologies Inc M96 [Mobility Radeon HD 4650] Driver in use: fglrx Rendering method: None Checking if it's possible to run Compiz on your system. [SKIP] Checking for hardware/setup problems [SKIP] At least one check had to be skipped: Error: No rendering method in use (AIGLX, Xgl or Nvidia).
View 2 Replies
View Related
May 14, 2010
When I go to change the Visual Effects settings from Normal to either of the other 2 choices, the screen goes black and nothing happens. Could this be a driver issue? Should I buy a video card instead of using on-board and if so, which ones work the best with Ubuntu?
View 1 Replies
View Related
Nov 28, 2010
I have a problem with Xorg, I am not sure if the black screen is related, but sometimes when I am just using the computer, with heavy processor and memory, but sometimes not, but the title bars to the programs disappear, my compiz effects quit working, and the cairo dock becomes unusable, so I cannot switch windows, but I can close them using 'File > Close" to access the windows under the ones on top, and to fix it I have to switch over to a terminal "Ctrl + Alt + F2" and log into that to kill Xorg by "sudo top" and killing it with the PID.
And the Blanking Screen, I am just doing usual programming with Bluefish, Eclipse and the terminal, and the screen will just go black, and won't come on if I wiggle the mouse, press a key on the keyboard or turn it off and back on, the status light on the monitor stays green, and doesn't go to orange as if it were unplugged or the computer went idle, so I know that it is still communicating with the monitor, but the way I fix this is I have to manually power down the machine via the power button and turn it back on and it works normally for a while.
View 9 Replies
View Related
May 30, 2010
I attempted to install the mesa-dri-drivers-experimental package and my screen became unusable when I enabled desktop effects. I then uninstalled mesa-dri-drivers-experimental and tried to install the akmod before realizing that my card isn't supported yet. Now I can't seem to do anyting to get my screen back. I removed the blacklist on nouveau, but my screen still goes black after fedora boots. Is there any way I can just get things back to default without reinstalling the whole system?
View 1 Replies
View Related
Jul 22, 2010
I'm currently having a problem with flash moves
whenever i try to do full screen the movies keeps playing but the picture just dosent refresh so i hit esc and it works fine in the window
so far ive tried different browsers and its the same problem full screen flash monies work when i disable desktop effects but i don't want to disable desktop effects every time i go to play a movie
does any body know a way i can make flash work with desktop effects?
View 10 Replies
View Related
Dec 19, 2010
After checking "enable desktop effects" in KDE. I'm dropped to login screen and can't login. How can I enable desktop effects? (As a solution to not being able login after checking the box I found that deleting kwinrc in .kde/share/config/ should help and it worked, so this is not a problem).
Fedora 14 2.6.35.10-68.fc14.x86_64
$ lspci | grep -i vga
01:00.0 VGA compatible controller: ATI Technologies Inc Broadway XT [Mobility Radeon HD 5800 Series]
I don't know if it's related but I also when on login screen I can't console login - after warning I see black screen and nothing more.
View 5 Replies
View Related
Apr 3, 2011
I'm using a Gateway LT3103u running a dual boot of Win 7 and Ubuntu 10.10 (separate partitions) and ever since I've started using Ubuntu (last October) I've had persistent graphic card problems.
My graphics card is the ATI Radeon X1270.
Right now I can't use any visual effects because of I do the screen spazzes out and becomes unusable. This isn't a big deal for me since I don't use them but I figured it's relevant to the problem.
Even with visual effects off I still have problems and at times parts of the menu will stay on the screen in a little box which covers any windows that open beneath it. The only way to get rid of it is to turn visual effects on so the screen resets then hit use previous settings.
View 1 Replies
View Related
May 4, 2010
Lucid is not in testing but it's released.It seems it works now, with all desktop effects activated and switching users and closing sessions.The only thing I still don't know is which screensaver can I use if removing gnome-screensaver?
View 1 Replies
View Related
Jul 12, 2010
I have installed fail2ban and it is working great. It is monitoring the auth.log and it's own log. Now here is my question... Every week, my log files rotate, which is just fine for the most part. But this also rotates the fail2ban log and removes any chance of catching a repeated IP from Sunday to Monday. Is it possible to copy a portion of the previous log to the new log?Here is my scenario of what I would like to accomplish, but I am a novice here so please be specific..
logrotate does its job as expected... then a script writes a portion of the previous log to the new log then appends a word/number after that portion (we call this log.1)...next time the log rotates (creating log.2), I want to take the portion of log.1 after the word/number and append it to log.2 along with another word/numberThis will always ensure there is at least 1 week backlog in the logs for fail2ban to track. I don't want to just change the frequency of the log-roll because it doesn't solve the issue of tracking across the log roll
View 9 Replies
View Related
Sep 13, 2010
I have a Visio TV that I dropped and cracked the LCD display in one corner, for watching TV it's basically useless now. On a whim I plugged it into one of my computers and about 75% of the screen is still usable. Only the bottom right hand corner of the screen is messed up. What I'd like to do if possible is to define an area of the screen. Say for instance the top left hand corner across and down to where the screen starts getting bad.
Like a left click and drag out the good area and then make only that area "the monitor" for the OS to use. I'd then probably build a case or something to house it in and only show the "live" area to clean things up. I'd like to use Ubuntu. But if you know I can't do it in Linux but can in Windows I'd consider that option as well. I just hate to junk the TV if I can use it some how as a monitor.
View 1 Replies
View Related
Aug 10, 2010
I recently installed Ubuntu 9.04 (Jaunty Jackalope) which I then promptly upgraded to 10.04 LTS (Lucid Lynx).
I have a canon pixma MX320 multifunction printer. I downloaded the printer/scanner drivers for linux (debian) from [URL]...asp and installed them with no problems.
The printer function works, as I managed to print a test page, but I was wondering if there was a way to test the scanner portion of my multifunction printer to make sure it works?
View 3 Replies
View Related
Feb 10, 2010
I get a black screen whether I use Ubuntu's driver or ATI's driver, but when I use the default it works fine without an desktop effects. Catalyst installed without any errors.
View 8 Replies
View Related
Jul 18, 2011
I have a lot of files containing chat-log (IRC) and would like to extract information out of these files.
File sample
Code:
Session Start: Sat Apr 03 15:06:29 2010
Session Ident: XXX
[15:06] XXX is ~X@host-85-85-85-154.isp.be * XXX
[15:06] XXX on #channel1 #channel2 #channel3
[Code]....
View 2 Replies
View Related
Jan 2, 2010
When you have a computer whose hard drive is partitioned with one part Windows and the other Linux, what are the concerns with viruses and transference across the two systems? Can viruses infect the windows side brought over through the Linux side (Firefox) or are the partitions completely separated? In other words, if all of your Internet voyages are through Firefox under Linux, is there any danger of infecting the Windows side of the computer? What about when having Linux installed within the Windows portion as a virtual system?
View 2 Replies
View Related
Jan 22, 2010
Scrot supports capturing a portion of the screen by allowing the user to use the -s option. I need to use the command line.
So I installed xdotool to allow me from the command line to move my mouse, click buttons, type text, select my focus, etc...
I also built a bash script that uses scrot and xdotool that allows me to select the window that has a firefox web page displayed. Then I can position the mouse and do a right button click to position to a data entry box on the web page. Then I can use xdotool type "my text" to input the text into the input box. All this works very neatly.
My problem is the following:
The command "xdotool mousemove x y" does not move relative to the top left hand corner of the focused window. The command moves to the absolute x y screen location, not the relative window location.
This happens even though I use the command "xdotool windowfocus windowid" or command "xdotool windowactivate windowid" to specify which window I want to use (want in focus).
Does anybody know how to specify that the "xdotool mousemove x y" is to move relative to the upper left hand corner of the currently in focus window?
By the way, here is my bash script:
#!/bin/bash
# get window id
WIN_ID=`xdotool search --title MyWindow`
# activate window with title MyWindow
[Code]....
View 2 Replies
View Related
Nov 4, 2010
I am still getting the error that no kernel modules are found when trying to load components from the CD on the multi-arch version of Squeeze. Are these even tested prior to releasing them? I mean I know it's testing but I thought we were reaching a release-date and the installer is 100% broken and has been for months. I have a pile of useless multi-arch CDs for Squeeze that won't install on 64bit or 32bit machines due to not finding the kernel modules. Can we get some testing on the installer portion of Squeeze?
View 3 Replies
View Related
Oct 23, 2010
Does any one else have this issue with Ubuntu's Remote Desktop. I am running 10.10 on all my computers and if I try to connect to another PC while it has "visual effects" enabled the screen will not refresh. If I disable effects on the host PC then remote desktop works fine. All PC's running ATI cards with the restricted driver "fglrx". It works but I would like to enable effects on the host.
View 3 Replies
View Related
Jul 14, 2010
I'm currently studying for my Linux+ test and I'm getting conflicting information regarding the rm -rf command. Yes, I know this a dangerous command, but my question is in regard to how the command functions. In one book I'm studying it says that rm -rf / home/myfolder (there's a space in there) will delete the entire root directory because there is a space between the root and home directory. It says that if there is a spacing such as this, it will ignore anything after the space, so in this case, it would delete the root directory and stop, not that there would be anything left anyway. Then in another book I have, it says that if you did a rm -rf folderName / (with the intention of adding the trailing slash to indicate it is a directory and not a folder) it will delete everything in folderName (assuming it's a child directory of your pwd) and then CONTINUE on and delete the root directory. Now, those two statements contradict each other. When you remove a directory, does the command line ignore anything after a space or not?
View 1 Replies
View Related
Jul 7, 2010
I am having a Dell ST2410 LCD and a laptop IBM.I want to span my desktop so that some portion is on laptop and some on external monitor. I tried xdmx but it did not worked.
View 6 Replies
View Related
Jul 26, 2010
So I'm interested in using Jokosher as an alternative to Garageband, which is what I'm used to using for recording music. After messing around with it a bit I've encountered a couple problems.The first is that Jokosher doesn't seem to remember the audio input device I selected the last time I used it. This may seem like a minor complaint, but I like to use my computer sort of like a tape recorder - that is, I use it to jot down quick musical ideas for later reference. With Garageband my internal mic is automatically selected, so all I have to do is press record. With Jokosher, however, I have to select the input I want to use every time I open the program. This, to me, kinda defeats the purpose of using a computer as a quick note-taking tool. Is there any way to set a default audio device for Jokosher to use, or to somehow make it remember which device I selected the last time?
The second is that I don't know how to install effects for this program. When I press the "effects" button it tells me that I need to install LADSPA-compatible effects myself. I've done a little bit of googling and still I can't figure out how to do this or which effects I should get.
View 3 Replies
View Related
