I just installed 10.04 Lucid.There were some animation effects in the compiz config settings manager which were to add extra features such as burn,glide and a whole lot now they are not in this compiz any ideas?
View 8 RepliesI havent used Ubuntu in a while, so I get version 10.04.1 and when I get compiz, I am missing lots of compiz effects. Like fire, 3d windows, changing how many side are on dektop cube. The skybox doesnt rotate with the cube, when it should.
View 1 Replies View RelatedAs the title said, my compiz effects are sometimes blinking, like when i rotate my cool cube it suddendly for some miliseconds it becomes transparent or something like that, and looks very ugly and very annoying, cuz it's very quick and looks so not smooth and clean. I've upgraded from 10.04 to 10.10 . I didn't had any problems like this. I also use emerald.
View 3 Replies View Relatedi am using compiz and i have just installed Cairo-Dock. I have a minimise/maximise animation that minimises the window to the dock, but I want it to go to the panel like it did before the dock . the dock has become my default task switcher, not just this one but all my compiz animations occur at the dock now (but this and the show window animations are the most annoying)
View 2 Replies View RelatedUsing Compiz's animation plugin, only the open and close effects work. When any entries are listed under the "Animation Selection" for Minimize, Focus, or Shade; the animations do not play; and I receive a libnotify error: "Animation settings mismatch in 'Animation Selection' list for __<Minimize or Focus or Shade>___ event."This happens even with the Animation Selection values reset and even the entire Animation configuration reset. I use the Gconf backend, but this also occurs with a file-based configuration. This has never worked for me.
View 3 Replies View RelatedI recently downloaded the Vienna3 mouse cursor theme and there is an animation where it turns into some cool looking thing when I drag a window. but early this morning I noticed that it has stopped working. I also installed the "slick black" theme that I got from gnome-look.org the night before but I customized it to run the Vienna cursor theme. but that drag animation was still working. Additional info: I'm using Ubuntu 10.10 and compiz fusion and I have gtk 2 set as my decorator
View 1 Replies View RelatedI first had Ubuntu 9.04 and had to go through a wild goose chase to get effects like wobby windows, cube and all that jazz. When I upgraded to 9.10 I still didn't have any problems with my desktop effects. Once I upgraded to 10.04, I couldn't use any of my effects.
I went into CompizConfig to check what was wrong, but all of my effects were still "checked". I checked the Hardware Drivers and got the drivers I needed (my GPX card is a GeForce 5200) but that still didn't fix the problem. I've tried searching for some kind of instructions in Google, but all of the instructions I've found don't really help. Does anyone know where I can go that addresses this problem and could have a possible solution?
I just installed ubuntu 11.04 last night. I noticed most of my effects were missing so I tried to put them back on. This didn't work so I disabled the effects. Then, my panel at the top and the Launcher is missing. .How do I get these back?
View 6 Replies View RelatedSo I go into System -> Preferences but I can't find "Advanced Desktop Effects". It doesn't open either when I try it via terminal.
View 2 Replies View RelatedI have just downloaded this theme: [URL] I tried using emerald to install the theme - I can see the theme there, but I cannot install it. I opened CCSM, and see no option for a theme. I am rather new with linux, so I am more than likely missing something
View 2 Replies View RelatedI'm on a Sabayon Linux install, and the Sabayon forums and stuff have NO idea what I'm talking about and keep giving me "facepalms"
So in Ubuntu I could enable desktop effects and simply use my metacity themes.
In Sabayon, when I enable Compiz, it changes my window theme manager to Emerald. I want to use metacity, not Emerald. They kept telling me it wasn't possible when I used Compiz effects and Metacity together all the time.
I've been running an emerald theme in compiz for few months now and everything was running fine when a couple days ago VLC started acting weird and playing little static clicks every few seconds. Then the next time I booted up after an initial second of flashing my full desktop the screen blanked off a section on the left and bottom of my screen. When I logged in docky told me it was having trouble with the compositing, but when I scrolled over the spot where my docks are they were there. My arrow can be seen in the black areas as can the start panel when I scroll over it, but aside from that it is black and when I open I window the blackness covers it in that part. None of my compiz effects seem to be working.
I am running a pretty basic motherboard and I know basically nothing about this kind of thing but I looked up the built in integrated video card online : ATI Radeon - HD3000 Graphics, On Board Graphic Max. Memory Share Up to 512 MB. I have an ATI driver installed but when I look at my drivers it says it is installed but not currently in use. When I look at my visual effects page it is on none, so I tried changing it to normal and it says the effects can't be enabled. I am running a dual boot with windows and when I go into windows there doesn't seem to be any problems. I am running a Biostar A760G M2+, an AMD AthlonII x4 and running Ubuntu 10.04.
Still new to Ubuntu, and I've installed it on my laptop tonight (Alienware M11x, Ubuntu 11.04). I've got it pretty much how I want it, but I'm stuck with a CCSM/Compiz question.I have Compiz installed, along with the extra plugins (burn, etc).However, when I try to enable any effects, I get nothing as a result.I've rebooted, enabled both Gnome and KDE compatiblities, etc- nothing will work.I'm still learning the ins-and-outs of the terminal/command line system.
View 3 Replies View RelatedSo I was messing around on my laptop this morning and I noticed that my desktop effects were turned off. So i decided to turn them on but as soon as i pressed the "normal" option a pop up opens up and says "searching for drivers" then the screen flickers and finally it tells me "desktop effects cannot be enabled". Also my compizconfig wasn't functioning. for exmaple: I turn on wobble windows and nothing happens. No wobble windows.
View 6 Replies View RelatedSuddenly, i was working fine with my Karmic, and now can't activate desktop effects.
First windows lost borders, so I reset X (ctrl+backspace) and since then, effects went to hell.
I've reinstalled nVidia drivers. All went fine, but desktop effect still disappeared.
See the commands output below code...
A friend whom I turned on to Ubuntu with 9.10 recently connected a projector to watch a movie off her laptop. When it was connected, the laptop screen changed and it was clear that desktop effects through compiz were disabled. Thing is, since disconnecting the projector, I cannot get the effects back.If I go into Preferences - Appearance and click to enable Normal or Extra Visual Effects, the same thing happens. I.e. I get a popup saying Searching for hardware driver...and after about 20 seconds, the screen flashes a bit, and says
Desktop effects could not be enabled. Not sure why it's searching for a hardware driver. The computer doesn't require any 3rd party hardware drivers to be enabled - it doesn't have an nVidia card or anything like that.If it makes a difference, she yanked the VGA cord out without setting the display mode back to just her laptop with the FN and F key combo.I've tried:
-Reinstalling compiz
-Tinkering with options under Preferences - Display
-Ensuring that nothing is available under Preferences - Hardware Drivers
I have installed Lucid on my old T61p. And I am using the NVidia driver Nouveau. But I cannot work out how to enable compiz with it. Is it possible to have composite effects with this driver?
View 3 Replies View RelatedHaving that old problem with the mouse theme defaulting to the old fugly default when compiz effects are on and while over the desktop area. I tried following: http://ubuntuforums.org/showthread.php?t=820245 there is absolutely nothing like that in General>General Options in ccsm. Nothing in simple either.
View 2 Replies View RelatedI was hoping someone could tell me how to turn off the basic windows effects in compiz but keep it turned on so I can use something like Docky.
The reason is because nautilus takes a few painful seconds to open up with the effects turned on and some times I end up clicking a folder etc a second time thinking it hasn't opened.
I hope this is the correct section. I have recently updated to 10.04 and now Compiz/desktop effects wont work. When I try to turn visual effects on I get a message saying they could not be enabled. I'm a bit new to all this so not sure if I'm doing something wrong.I've looked at many threads regarding this problem and nothing they say has worked. iv tried using Hardware Drivers (in systems administration) but this says "no proprietary drivers are in use on this system".
Also I don't know whether this effects anything but when I open NVIDIA X Server Settings (in systems administration) i get a message saying "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."Does anyone know how I can get Compiz/desktop effects working?.
I am unable to run compiz or set any advanced desktop effects in my Ubuntu 9.10 running under VMware Workstation 7.1. This is the output of the compiz command:
Checking for Xgl: not present.
xset q doesn't reveal the location of the log file. Using fallback /var/log/Xorg.0.log
No whitelisted driver found
aborting and using fallback: xterm
no xterm found, exiting
What does all that mean exactly?
there is no System > Preferences > Advanced Desktop Effects Settings .im runnig compiz with lynx and im trying to access the advanced desktop effects but i can find it.
View 3 Replies View RelatedI've been running Ubuntu on my laptop for a couple months now and I've been using compiz settings manager. For some reason I can't seem to get the window effects for minimizing, closing, etc. to work. I have followed a few tutorials and nothing seems to make any difference. As far as I can tell, that is the only thing in compiz that is not working. I am running Ubuntu 10.10
View 4 Replies View RelatedNot quite sure what could be wrong here. The settings are enabled, but none of the compiz functions are working. The were working on Friday. I did some searching but I'm not even sure what the problem is, or how to diagnose it. I'm running 10.10, now.. any help is appreciated. Even if you just tell me what I need to be searching for to find a solution.
View 9 Replies View RelatedI am able to start the Raindrop effects by pressing Shift+f9... but how to stop?
View 1 Replies View RelatedAfter rebooting, the first message i've been shown was: "Your hardware doesn't support Unity". First strange thing: Unity was working perfectly on all the Beta live versions I've tried before the upgrade.
Well, not a big problem, I didn't really like Unity. Let's stay with Gnome + Compiz, I said.. but Compiz effects don't work anymore. When I try to do System --> Preferences --> Appearance, the "effects" tab doesn't show anymore. The file named "screenshot1.png" will show you this problem, even if it's in Italian: there are only the Theme (tema), Background (sfondo) and Fonts (Tipo di carattere) tabs. Also look to the strange, fuzzy right corner of the themes previews. This didn't happen on 10.10. 3d rendering should be working, since I get
Code:
glxinfo | grep rendering
direct rendering: Yes
But nothing works.
System->Administration->Hardware is empty, but it has always been empty, even on 10.10 (but Compiz effects were working). When I try to set Compiz as windows manager in Compiz Fusion Icon, sometimes the title of the windows disappear, along with the minimize, maximize and close buttons. Do you think there's something I can do to fix all these things?
Some of my applications use different window types for pull-down menus than what compiz window animation think. This means that I get normal open window animation on these pull-down menus instead of the menu-theme. Inside the CompizConfig you can specify exactly which window types the different animations apply to, and you can use "grab" to probe your window for this info. My problem is that I can't "grab" the info for the pull-down, since it leaves "grab" mode once I try to open the menu (and grabs the info for the parent window instead of the menu). How do I get to know the window properties of the pull-downs, so that I can map them to the relevant window animation theme?
View 5 Replies View Relatedyesterday i installed some update of compiz plugin (maybe extra add or somethink like that)
after update is completed i fount that i am missing "Animation Add-on" plugin !!
Look the Screen shoot !
simple-ccsm i can't Enable extra animation
I only have curved fold, fade, magic, lamp wave, horizontal folds, glide 1, sidekick, zoom, dream, glide 2, and vacuum.
I'm missing airplane, beam up, BURN, domino, explode, leaf spread, razr, and skewer effect.
Look the Screen shoot !
I thought that i might missing a package or some thing
but
Here is the Screen shoot
Every thing Connected to Compiz is installed where is the problem!, all what i did is installed some updates
When trying to set up desktop effects with Compiz I get this message: Accelerated 3D graphics is not available Desktop effects require hardware 3D support.
I have used Fedora 10 last year and the 3D effects worked fine. I have a Nvidia Geforce 6100 video. I also have another hdd on the PC with Mandriva 2010 which I use and the 3D compiz effects work fine. I'm running Omega 12. Isn't it Fedora 12 w/ codecs added? isn't video detection the same?
i 'am try to enable desktop effects for compiz .., but i get this message Accelerated 3D graphics is not available Desktop effects require hardware 3D support.
My laptop is Hp Mini notebook 2133 im using Fedora 13,
my video card it's VIA CN896/VN896/P4M900