I have a website I want to map all the links starting at a given page, and record where everything is linked. I want to record any broken links, and have a nice little hierarchy of link names when I'm done. I thought the package webcheck could do this for me but I'm not sure.
the server is windows 2003. Im interested in any means that can accomplish this task.
At my Uni, we use a web-based login for our internet connections. Its based off of Cisco, and every Wednesday night every computer on campus must re-enter their credentials to use the network.
Normally on my several computers I simply pull up the Terminal, point links to google.com using
Code:
And enter my credentials when Cisco redirects to the login page.
Literally, the process is
Code:
Then ENTER to accept the redirect, down arrow to skip over the logo image, USERNAME, ENTER, PASSWORD, ENTER, ENTER.
Naturally, this is EXTREMELY time consuming, as I have about 5 computers located around campus and must physically walk to the machines and login every single week.
My question is, How would I formulate a program that does the following;
1) checks for connectivity (i.e. is able to reach/resolve to the greater part of the internet) and
2) automatically fills in the credentials on the links login page?
i have a Realtek RTL8192E Wireless LAN 802.11n PCI-E NIC card on my Samsung r580 laptop that i just installed Ubuntu studio 10.04 on. I am wondering how to get the wireless card working in Ubuntu. I saw some info on my card here *url #1 (the urls i reference are in the attached txt file called urls.txt because i couldn't post the actual urls because apparently i need to post 15 times or something which i don't have time for at the moment)* and then i went here to download ndiswrapper *url #2* and both of the links on that page don't work. I followed the instructions on this page *urls #3* to get the info on my card. here is the info when i typed "lspci -knn" into the terminal in ubuntu studio. Code: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 12)
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 12)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06)
Kernel driver in use: ehci_hcd
[Code]...
I am attempting to write a shell script that accesses a web page with a specified log-in and parses said page for download links to installation packages. Can anyone advise on the possible (and best) ways to go about this? Perl? wget? curl? I haven't been able to find any clear-cut documentation so far concerning the aforementioned -- if anyone has some favorite tutorials on parsing web data that would also be useful.
View 4 Replies View RelatedWhen I try to start Apache2 (apachectl start) the command prompt returns right away. But when I check the processes (ps ax) I can't find httpd. And when I try to hit the server from a browser I get "the page cannot be displayed" error.
View 11 Replies View RelatedI can view a php page only with links browser (a text browser) But when i use firefox i got an error "Content encoding error"
View 4 Replies View RelatedI have a personal wiki of notes, with now thousands of links in markdown format:
[link text](http://example.com)
but now that fckeditor is available for mediawiki (very beta), it has become much better to just stick with wikitext format. There are only a few conversions to do: tables, links, and bulleted lists. The lists are a fairly simple regex and fckeditor magically reformats the tables, so all I'm left with is the links. But I'm not a regex master. How do I reformat code...
i am able to try ubuntu and everything works fine until i try to install. the menu comes up to the first page where it tells you to plug in your machine and make sure there is enough disk space and network connectivity. when i hit next on this page the mouse icon changes but the next page never loads. the longest i let it hang there was 2 hours. ive tried multiple times with the same result.
im running from a flash drive on an ASUS Eee PC 1001P-PU17
10.04; 64 bit In Firefox, the size of the fonts varies greatly from site to site. Some are too small to read, others huge. Some headings and menus overlap.Screen size: 1152 x 864
My settings are:
Proportional: serif 14
Serif: Times New Roman
Sans serif: Arial
Monospace: Courier New 14
Can anyone tell me how to name Page up & Page down buttons in global-keybindings to use the custom commands with these buttons?
View 1 Replies View RelatedOn FC11 64 bit with Adobe flash plugin for Linux installed, I see segfault errors from "npviewer" in /var/log/messages. The only browser I have tried yet, Firefox, has glitches every now and then. Sometimes it shows the title of a page in a tab, but the page is blank. This can even happen when I try the Google main page. Is it true that npviewer has something to do with Adobe flash? Is there a way to fix the problem? If it is caused by Adobe flash, is there a different plugin that will replace Adobe flash player?
View 1 Replies View RelatedHow can I find page hit and page miss ratio in linux fedora core 12?
View 3 Replies View RelatedI have a problem printing to my HP printer.
What is my problem? I have a page (one page - text an graphic) to print. When I sent it to my printer it prints OK. When I sent it agian, the output is totally garbled. When I sent it again (a third time) it is OK. Sent it again (4th time) it is garbled. Sent it again ... you get the picture ;-). Alternating good and bad pages.
What is my setup? I run Fedora 14 with Cups 1.4.6. The printer is a HP Deskjet 940C. It is connected to a linksys wireless print server. It is configured in CUPS to use ipp printing. The driver I use in Cups is 'CUPS+Gutenprint v5.2.6 Simplified (color, 2-sided printing)'.
I have apache httpd server on my Fedora 10I got 2 problems:First : I copied the web page files to its Document Root <var/www/html> & Disabled the default web page. But when I visit http:/localhost ，it shows up the list of files in <var/www/html> as if a ftp server browsed in web page. So how can I set http://localhost load my default web page index.html ?Second :I want to set up a web server on Internet through my router . I applied for DDNS account & input it into router correctly . I set virtual host in server to redirect any access from port 80 to 192.168.1.2:80 in LAN . Just for in case , I also download and running the DDNS software & installed it on PC 192.168.1.2 in LAN . My DDNS provider is oray.cn . It's a Chinese server provider . I don't think there is anything wrong with oray.cn . But if you need its information just visit oray.cn (Google can translate it for you). So I want to know did I miss something to set up a web server in this kind of situation
View 2 Replies View RelatedAll has been fine with my emails but today morning when i tried to log on I got an error message "You must be logged in to access this page, go to logon page" I dont understand why even when i supply my correct user name and password.
View 2 Replies View Relatedwanted to know if i can execute commands on linux console through a web page and redirect it back to my web page !For example :if i send a query "ls"it should execute this command on my linux console and also redirect the list of the files to the web page from which i give the command !
View 8 Replies View RelatedI want to combine 4 ps(or pdf) page to single page and for this i have try a2ps command as:
a2ps -4 1.ps 2.ps 3.ps 4.ps -o outfile.ps
Event through it divide the page into four section. But only give one output of my four input. other three section is blank. Is i am doing some wrong or Is their any other command to do so.
Vim: substitute for Page Up and Page Down keys?
View 4 Replies View RelatedWhen I boot slackware, I have all the boot process that run but too fast. I don't have time to read what's running. Is there a way to to go page by page. I didn't find any key in my keyboard to stop and go.
View 16 Replies View RelatedI have a Canoscan LiDE 30 scanner which works fine in Linux. I haven't used it in months, and never since moving from Jaunty x86_64 to Fedora 11 x86_64. This evening I suddenly need to scan two pages to send to someone via e-mail, and the recipient is desperate to receive them. Naturally, Xsane has decided this is the moment to screw me.
The problem: I cannot figure out how to tell Xsane that the page size is 8.5 11. It insists on scanning only the left side, 3.99 x 11. I cannot find a page size anywhere in any of the buttons.
In Preview I once got it to scan the entire page, but could not figure out how to save the image to file. Subsequently I have not been able to figure out how I did it. In any event, scanning from the small main window always scans 3.99 x 11. Adjusting the scan area manually in the Preview window allows me to change the size area in the small main window to 8.5 x 11, but when I then scan from the small main window it reverts to 3.99 x 11.
I have scanned the document a hundred times at least, each time trying different buttons, but nothing has succeeded in getting the full page.
I can see some soft links in /etc directory which are pointing to /etc/rc.d Directory contents.
Code:
lrwxrwxrwx. 1 root root 7 Jan 31 08:19 rc -> rc.d/rc
lrwxrwxrwx. 1 root root 10 Jan 31 08:19 rc0.d -> rc.d/rc0.d
lrwxrwxrwx. 1 root root 10 Jan 31 08:19 rc1.d -> rc.d/rc1.d
code....
Any body please tell me what is the purpose of these soft links in /etc directory ? I am using RHEL 5.4 ...
I am running 9.10. I have a HP Photosmart 7350 printer. I have it installed and printing. But the issue I am dealing with is that it will print a full page and then print a blank page..then a full page..then a blank page. Actually they aren't completely blank..it shows half of "2 of 6" or whatever page it is on. Like it cuts that in half and prints the 2nd half of "2 of 6" onto a separate new page.
View 2 Replies View RelatedI installed OS11.4 on my old laptop, Compaq Armada E500., 512MB RAM, ATI Rage Mobility. During installation I chose "minimal server" and added some development packages, lxde and a little more. I chose to start in runlevel 3 which is full networking without X. Still, when computer is booted it tries to start Xorg which doesn't work because of some problem w driver. The start-up seems to stop there, it never loads completely - seems most things in runlevel 3 are not started (see below) I can manually login on laptop and fix it - but never permanently, same thing again after reboot.
I have checked /etc/inittab & yast - both states default runlevel is 3. I have checked services to be started both directly, browsing directory /etc/rc.d/rc3.d/, and with YaST, it is very clear X should not load during boot. But, as said, it does.. I don't really care about the driver problem right now, I can fix that later when I have more time. So how do I stop X from getting started automatically?
More info, if needed: The installation also stopped with message on tty1 "Starting YaST2" and tty8 showing errors with graphics driver (mach64). The system seemed to be installed though, so I simply rebooted (issuing "reboot" from tty2).
[Code]....
I'm not completely sure where it stops, network is configured but keyboard is wrong and mysql & everything after is not started, so somewhere between S02network and S06kbd. I'm going to use it as a server for testing purposes so no X is actually needed - however I do want to have X & lxde installed just in case, my Internet connection at home is terribly slow so I need most things I might need in the future installed today.
Just got back to attempting to play with 10.04 using its Live CD. It consistently goes to the "Log In" page and not the Live CD page on running. I saw a Post specifying a F key to be pressed on boot-up to get to the desired starting point some time ago, but did not write it down. Some advice did say press Any Key but this does not seem to do the job. Tried to use the search function here but no joy. Can anyone remember which F key? Note that as a check, I tried to use 9.10 Live CD and this worked fine, so it is not a machine problem.
View 2 Replies View RelatedWhenever I click a website link to a .pdf I get this error message, "Could not launch Adobe Reader 8.1.2. Please make sure it exists in PATH variable in the environment. If the problem persists, please reinstall the application." Even though there is no Adobe Reader installed on my p.c.
I then have to right click the link and "Save link as How do I set the PATH variable so that Evince can open the document directly without first having to save the link?
Clicking on a link in an email does not work.Is there a setting I'm missing?TBird seems to work fine.
View 3 Replies View RelatedWe run Ubuntu 10.04 Server for our solutions, but I'm having a bizarre problem with init.d boot scripts. I have a script for the Sangoma wanpipe drivers that I modified to add the LSB information so that "update rc.d wanrouter defaults" runs correctly. The symbolic links from rcN.d to init.However, when I reboot the system, all the rcN.d links have disappeared and wanrouter isn't automatically started!I've never seen this kind of behaviour from a Unix based system in 20+ years, so I'm baffled as to how to fix the problem.
View 1 Replies View RelatedI am trying to set up scripts to execute Luckybackup and make them easily available to all users of the computer. Following the recommendation of the web site (http://ubuntu-tutorials.com/2006/12/...-all-versions/) I tried to set up a folder (/usr/local/myprograms/luckybackup_scripts) containing the scripts, and to put symlinks pointing to the scripts in /usr/lock/bin.
The object of this design was to have my local programs clearly separate from any other programs, and to point to them with symlinks in /usr/local/bin. is because /usr/local/bin is automatically searched when a terminal command is issued so the user need not specify the whole path to the script.The problem that I ran into was that the system would not let me create symlinks to scripts in /usr/local/myprograms/luchybackup_scripts. While ths symlink was created, it was invalid and did point to any target. The only symlinks that I could create had to be in the same folder as the target, namely /usr/local/myprograms/luckybackup_scripts. I tried to create the links using Terminal and "sudo ln -s
Links from third party applications do not work any more. When I go to click on links from PDF,s or from Pino or KeePass nothing happens. I've tested different browsers Opera, Chrome, Midori etc same thing links just don't work from third party apps.
[URL]
I just installed Ubuntu 10.04.1 LTS i386 on my desktop after not having it on there for while then decided to do a clean install on my laptop, which had 10.04, but I had screwed a few things up on it... (and a fresh install is always nice
Anyway, no big deal, just kinda weird: Whenever I google something that I had just googled before on my desktop (ie, a program or something that I had installed, and wanted to install on my laptop also), the link for the result is purple, as if I had already visited that link. But I know I haven't because this is a completely fresh install, I reformatted and everything. The only thing I can think of is that somehow the history/clicked links got transferred to the live CD from my desktop, as I used the same disc for both installs, but this seems a bit improbable imo.
EDIT: I just realized that I did NOT use the same disc for both installs, I couldn't find the original so I burned the .iso onto another one for my laptop install....