i had ubuntu 9.04 on my netbook, and i tossed windows XP on an empty partition, and now i cant quite figure out what to add to the boot.ini to give me the option to boot from the the ubuntu partition.
View 4 RepliesI am trying to install a box here where my /storage partition is about 2.5T.I had setup the partitioning with suse, while testing, and all worked well.Now when trying to install CentOs 5.5 it gives me an error, that my boot partition is on a gpt partition and this machine cannot boot that.Also I don't see the option to create XFS partitions from the installer.Can 5.5 support GPT @ install time?
View 1 Replies View RelatedI'm running 9.10 off of a 4 GiB CF card. I keep running into space issues with updates, so I purchased an 8 GiB replacement card. I've cloned the 4 GiB card to a .IMG file using DD.I've then copied the 4 GiB image back to the 8 GiB card using the Ubuntu startup disk creator program. Once done, I'm able to properly boot off of the new 8 GiB clone.Unfortunately, the clone ends up with 3.67 GiB of unallocated space at the end *see attached). I tried deleting the "extended" partition that the swap is located at after booting from a Live CD and the system was unable to boot after this. I was thinking that I would delete the swap entirely and create a swap file after I merged the existing partitions, but I was unable to do this.
best way to do this (e.g. get one large 8 GiB partition with my old image on it)? I still have the original untouched 4 GiB card and also have an external CF drive if I need to redo the cloning. I've also used Clonezilla before, so perhaps there's a way to do this that allow me to grow the image as it's being cloned.
I am building a 10.04.1LTS server. I am putting the /root filesystem into a Software RAID1 partition. I want to keeo my /boot partition outside of RAID.Is there a way to have a boot partition on both sda and sdb so if one drive fails the second boot partition will work away - or should this be kept in with RAID also.
View 6 Replies View RelatedMy laptop can't boot from cdrom becouse it is broken and it can't boot from USB becouse it has never been able. Ubuntu 8.10 now run in my laptop withgrub 1.I've just try the following trick.1) I put grub4dos in /boot2) I put iso image in /boot3) I add the follwing entrt in source.list
Code:
# =========== GRUB4GOS ===================================
title == Use grub4dos for the following entries: ==
[code]....
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies View RelatedGNU GRUB 0.97
Ubuntu 8.04.4
2.6.24-26
Added an SSD (dev/sdc) and decided to move some less often changed directories there. Started with /usr and /boot, leaving / on a primary in the first drive, for now. All started ok, and my changed fstab mounted the right ones, and the system works.
However, grub is actually using the original /boot on / on sda1. I cannot see any way to change this. (Which makes it sorta hard to update the kernel
From grub:
Okay, since it has two choices, I tried to tell it which one to use. But, grub> root (hd2,5) does nothing.
Disk /dev/sda:
what I seem to recall, grub doesn't care about the boot flag on the disk. Nor does it care about primary vs. logical (except GNU doc says "makeactive" only works on a primary?).
The GNU doc also indicates that it looks for a directory /boot on the partition, so if you're mounting a partition as /boot, it also needs to contain a /boot directory under it. Tried that, but no change.
Is my problem the logical partition? Does that prevent "grub> root" from changing it? I'm afraid to wipe out the old /boot and find that I can't start up.
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
how to dual boot os manually. i want to install backtrack 4 and ubutnu side by side. and i want to konw how to do it manually without destroying my data if possible !?
View 1 Replies View RelatedUbuntu 10.04. Each time I boot or reboot,I have to manually force a DHCP request (dhclient). It always gets an IP without problems at that point, but not sure why it isn't grabbing one automatically. I also noticed right when I hit the desktop, it usually shows the Ethernet is disconnected, but then appears to connect each time without problems as well.It's not annoying enough to start ripping the guts out.
View 2 Replies View RelatedI'm as big a fan of Linux as Linus Torvalds himself but it's things like this that help to keep Linux from becoming mainstream. I mean, how would I ever explain the need for the following procedure to a non-techie type, recent or prospective Ubuntu convert? The following is not a question, as I have finally resolved the issue but is more of a rant, I guess you could say. The reasons that I decided to post it are:
1) To hopefully help someone else experiencing this issue.
2) To point out the need for significant improvement in the area of editing partitions under Ubuntu Linux.
3) To vent my spleen.
[Code]...
My most recent F11 -> F12 was a near-fiasco, because I had the bad luck of foolishly having two distinct physical drives in the same system, where the /(root) partition on each drive had exact same UUID (result of partition cloning and neglect to change the UUID on the copy)
BUT! the UUID redundancy was not the initial trigger of my problems (its near-disastrousness played itself out only while I was REMEDYING the initial problem). The initial trigger: insufficient space on my /boot partition. "preupgrade" neglected to properly assess the space and/or warn me about it before proceeding.
In addition, the automatic cycling out of grub kernel entries came to bite me (part of many factors of the near-fiasco) because after the unfinished upgrade i had only one working kernel left to boot into, until I messed up that remaining one (too long a story), and then grub-install messed up my booting because of duplicate UUID. At any rate, at the end of what looked like a good preupgrade-reboot-upgrade-package-install process the post-install phase lingered a looong time, then I found myself booted into the old Fedora 11 kernel with absolutely NO modules (corresponding /lib/modules had been erased by the upgrade!) Somehow the system ran, but no USB, no wifi, no ethernet, no way to easily place the right kernel rpm onto the hard drive (had to unscrew the drive,etc., to copy over the correct kernel rpm). (Plus, file /boot/preupgrade/vmlinuz, left over from the arrested upgrade, was NOT the right target upgrade kernel version (2.6.32.9-70.fc12), so it didn't help either because it didn't have its modules either. The target /lib/modules (version 2.6.32.9-70.fc12) WERE there, but the kernel itself was NOT, due to upgrade running out of space on the /boot partition).
(Oh, and the preupgrade/upgrade had deleted my /var/cache/yum/preupgrade/ packages; hence my inability to quickly (re)install the 2.6.32.9-70.fc12 kernel rpm -- why!? it hadn't successfully finished the process!)
(Also, FWIW, i ended up rescuing the system through "rpm -i --force <kernel>", many an F12 rescue boot, chrooting, /boot/grub/grub.conf & fstab edits, tune2fs/uuidgen, running grub on command-line ("setup (hd0)"), etc., etc.)
So, any tips out there on phasing out the old-school /boot partition scheme, the safest and easiest way (without destroying a working system, of course)?
I meet a problem about "Your boot partition is on a disk using the GPT partitioning Scheme but this machines cannot boot using GPT." in installation. Does GRUB-0.97 on CentOS 5.4 support GPT?
View 4 Replies View RelatedI did a search here & on the web & can't find a "fix" that works. I tried the start order thing & the restart thing & one other I forgot, but nothing works.Funny the RESTART one didn't work as I CAN manually start it OK, unless I didn't put the command in the right spot.I DID notice that there are a few BUGS reported on this but they all go back far enough that I'd think they would be fixed by now.I don't have to manually start this thing every time I want to use it?
View 14 Replies View RelatedI am running Ubuntu 9.10, and every time the computer starts, cups does not appear to be running. I have to run the following from the command line:
Code:
sudo /etc/init.d/cups start
After cups is started, printing works fine. Does anyone know how I can get cups to start on it's own when the computer boots?
I just did a fresh install of 11.4 and I LOVE IT!!! One of the little issues I am having though, is that there is no login screen. No matter what settings I change it still auto-logs me in.
I am using GRUB and the Boot Loader Location has both "Boot from MBR" and "Boot from Root Partition". Is this right? I would think that I should just boot from the MBR.
I am trying to install Ubuntu 9.1 on an existing xp op. It is prompting to replace xp.how to install manually the dual boot with out replacing xp
View 1 Replies View RelatedI have just bought a new Acer 23" 1920x1080 flatscreen. I used to have an old fashioned 1280x1024 flatscreen.Now the problem is, every single time when I log on Ubuntu resets my screen res. to 1280x1024. So every time I have to use the Nvidia Settings to set my screen res to 1920x1080 and every time I have to place my panel widgets back in the right place and order, because of that, which is quite annoying.GDM has no problems though, it always displays in the right resolution.I use a Nvidia GeForce 6200 graphics card and the nvidia-current driver on Ubuntu 10.04 i386. I cannot use the Gnome monitors manager to set my resolution. Every time it sends me to Nvidia Settings.This is my Xorg.conf;
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
[code]....
i just installed nvidia driver 96 manually and after reboot pc wont boot, nothing no output , no beep even if removing ram but fans still work and lights too, did a cmos reset but still got the same result,
View 1 Replies View Relatedin the direction of a HOWTO (cant find one via Search or Google)hat tells me how to install dm_mirror to enable a boot of an 11.3 system that uses LVM for root and swap? I really would likecommands rather than using the GUI as it will help me understand what is going on in the background
View 1 Replies View RelatedI have the Samba server & users configured, I can access between Linux/Windows shares and both SMB & NMB services are set to be enabled at boot.Everything working.But when I restart the computer, I notice in services configuration that "This service is dead." for NMB. Therefore I have to enable it manually upon boot so that it works.I'm using Fedora 10, fresh installed and updated. I've noticed through search that others have had this issue as well throughout other versions of Fedora, yet I have not found a conclusive solution to this.
View 3 Replies View RelatedI know this has been covered in many threads before, but I'm stuck not finding my exact situation or an answer. I'm a newbie using a Debian Linux machine as the client and Windows XP machine as the server. I have successfully mounted the XP Network drive on the Linux machine using commands from the root terminal:
mount -t smbfs -o username="Windows Username",password=windowspassword //XPcomputername/folder /mountpoint/
However when I put the command in the ect/fstab file as suggested in several posts, I don't get any result on boot up. I.e. I can't get the network drive to mount on start up, I always have to manually mount it from the root terminal.
i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:
c: 97 gb
d: 150 gb
e: 150 gb
f: 100 gb
g: 50 gb
and 38 gb unlocated part
in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;
I installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
View 1 Replies View Relatedusing onboard windows disk management i have made 75gb unallocated to add to the aforementioned ntfs data partition. but, after resizing extended partition, will i need to fix grub even though i will be adding the unallocated space to a storage partition and not the ubuntu boot partition?
View 4 Replies View Relatedis it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
View 4 Replies View RelatedWhen I installed Ubuntu on my system (a year or so ago) I forgot to add a BIOS Boot Partition. This is something of a problem considering that the partition type for my 2TB drive is GPT. Hence, whenever grub is updated I get a warning:
Code:
/usr/sbin/grub-setup: warn: This GPT partition label has no BIOS Boot Partition; embedding won't be possible!.
/usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and its use is discouraged..
Installation finished. No error reported.
[Code]....
If so, what is the rough sequence of commands to create the partition (without disturbing what is already there) and then setting it as a BIOS boot partition.
Recently I reinstall Grub, but I have chosen on ntfs (windows 7 partition E: drive). After this I chosen /dev/sda which is correct boot partition.
Now Fedora 10 and Win 7 booth are working properly.
How can I get back my E: drive safely?
In Fedora 10 E: is not available, where as in Win7 it is available but asking for Format.
how to get back my E: partition which was chosen wrongly as boot partition.
Everything is installed and setup on my system, but when I setup my partitions I chose my Windows partition to be bootable. Can I just use cfdisk to toggle the bootable flag so my linux partition is bootable and rewrite the partition table?
View 2 Replies View RelatedI having a problem getting my grub loader to see one of my hard drives. I added a drive, and my grub loader lost track of where everything was. I couldn't get my old linux (Red Hat 9) so I installed SuSe on my new hard drive. But I need my be able to boot from my old hard drive because it has apps that only run on the earlier version. From /proc/partitions the old hard drive is sdd
major minor #blocks name
8 0 976762584 sda
8 1 2104483 sda1
8 2 20972857 sda2
[code]....