Fedora Servers :: NMB Service Fails On Boot, Needing To Be Restarted Manually?
Mar 30, 2009
I have the Samba server & users configured, I can access between Linux/Windows shares and both SMB & NMB services are set to be enabled at boot.Everything working.But when I restart the computer, I notice in services configuration that "This service is dead." for NMB. Therefore I have to enable it manually upon boot so that it works.I'm using Fedora 10, fresh installed and updated. I've noticed through search that others have had this issue as well throughout other versions of Fedora, yet I have not found a conclusive solution to this.
View 3 Replies
ADVERTISEMENT
Apr 22, 2011
I installed centos 5.5 and httpd service was working well for the last 2 weeks till yesterday. I restarted server and noted my hosting service were not working. I have tried service httpd restart on the terminal and it dispalys [FAILED]. I updated my machine and and have tried restarting it but it doesn't work. I am new to centos and I dont know how to solve this.
View 2 Replies
View Related
Jun 2, 2011
I have been running squid3 proxy on a Ubuntu 10.04 machine for several months with no problems.It serves about 50 users ( win and Lin clients ) and is usually rock solid.
However, over the last few days problems occur.
The users lose connection and I have to restart squid and all is ok again. Sometimes it drops 4-5 times in an hour ans sometimes not for 6 hours or more. I know the problem is related to Squid as the actual internet connection is on and the squid machine can access the internet.
Restarting squid cures the problem.
How can I troubleshoot this ?
Checking the cache.log doesn't show anything strange as far as I can see.
Could it be that the cache file is full or something ?
View 4 Replies
View Related
Jul 13, 2011
[URL]i discovered a new problem. The command to look for failed services reports the following:
Code:
systemctl list-units --failed
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
akmods.service loaded failed failed LSB: Builds and install new kmods from akmod packages
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
1 units listed. Pass --all to see inactive units, too. The akmods.service is installed of the nvidia graphics card module, which loads fine and is behaving fine. I tried to disable the service and then enable it again, but the error persists.
Is this just a kind of notification, that everything is okay, and no new modules need to be build? Or is this indication for possible breakage ahead during next kernel update?
View 9 Replies
View Related
Feb 18, 2010
have a web application that runs fine.Whenever I run jetty manually the application runs ok. This is what I do:sudo java -jar start.jarThe application is located within the webapps directory correctly and the required jar files are within /usr/share/jetty/lib.But when I run jetty as a service:sudo service jetty startThe server starts, but the application does not respond. There is no error in the output. This is very strange, isn't it
View 1 Replies
View Related
Dec 17, 2009
have a fresh install fedora 12 on dell latitude needs xfree for the dell moniter drive. Have installed to the point of autoconfig, get an error dbus service must be restarted. have no idea how to do such. it is a init 1 install. if i reboot here the system gives a black screen and typable screen but goes no futher. what do i do?
View 12 Replies
View Related
May 29, 2011
Just upgraded to F15 and I cannot seem to get the sendmail service starting at boot time.It starts and works just fine by hand after boot, so there's nothing wrong with the sendmail
configuration itself."runlevel" shows a current run level of 5 and "chkconfig" shows sendmail on for run level 5.All the other mail service (mailman, clamd, etc.) start fine.Doing "service sendmail start" after boot gets everything up and running just fine, but itsure would be nice to have it run at boot like it used to
View 1 Replies
View Related
Aug 24, 2010
I'm completely stumped by a problem with httpd in Fedora 13. It fails to start on boot: I can see: Starting htpd: FAILED, in /var/log/boot.log, but I can't find anything else in messages, audit.log or anywhere else that gives me any clue why. The weird thing is that running:
run_init service httpd start
after boot _works_ and the server runs fine, but even when it's running OK,
service httpd status
reports
httpd dead but subsys locked
I'm guessing that the problem somehow relates to selinux, but I can't find anything in the audit logs that gives me a clue. How to turn on more logging so that I can get closer to the problem. I finally discovered the cause. This system was originally configured to use network services directly, without NetworkManager. It had been upgraded a number of times since installation. It seems that over time, if you have turned off NetworkManager, the defaults have changed. Used to be that the network services was 'enabled' by default (hence started at run time). Now, the default is 'disabled'. Httpd couldn't start because there was no network to start on. Enabling network services at boot time fixed this. I guess I should have noticed this. But one might think that httpd failing to start because of the lack of a network might at least give a warning message in the logs about the reason.
View 8 Replies
View Related
Jul 6, 2011
I have a few problems getting a custom service/daemon to auto-start at boot. I'm running ubuntu 11.04 Server amd64 edition. One of the services is a Teamspeak3 server I'm trying to start. I would like it to start up automatically on boot. ts3 already have a script with start/stop commands so all i have done is make a little script for it to get it to run as the correct user.
Code:
#!/bin/sh
### BEGIN INIT INFO
# Provides: ts3
# Required-Start: $all
# Required-Stop: $local_fs $remote_fs $network $syslog $named
# Default-Start: 2 3 4 5
[Code]...
View 7 Replies
View Related
Aug 18, 2010
I've done some searching around but can't find anything conclusive on this error. The tech at my remote site restarted the 9.04 server(not sure if it was accidental or planned) and when it started the boot process, an error like the following shows up...
"The display server has restarted 6 times in the past 90 seconds. This indicates that something bad is happening."
View 4 Replies
View Related
Dec 6, 2010
I am building a 10.04.1LTS server. I am putting the /root filesystem into a Software RAID1 partition. I want to keeo my /boot partition outside of RAID.Is there a way to have a boot partition on both sda and sdb so if one drive fails the second boot partition will work away - or should this be kept in with RAID also.
View 6 Replies
View Related
Sep 10, 2010
I am running Server 10. I have a requirement to perform an action before the MySQL service starts, and perform another action after MySQL service stops.
I found the init script for MySQL under /etc/init/mysql.conf. I added my thing to the pre-start script there and works fine.
I am having trouble finding the script that stops the server so I can modify.
View 1 Replies
View Related
Feb 17, 2011
I did a search here & on the web & can't find a "fix" that works. I tried the start order thing & the restart thing & one other I forgot, but nothing works.Funny the RESTART one didn't work as I CAN manually start it OK, unless I didn't put the command in the right spot.I DID notice that there are a few BUGS reported on this but they all go back far enough that I'd think they would be fixed by now.I don't have to manually start this thing every time I want to use it?
View 14 Replies
View Related
Jun 6, 2010
I have a fresh new F13 installation and I am not linux expert, I need to test Fedora for some reasons. When I try to start HTTPD or vncserver services, status display as "This service is being refreshed right now", it keeps like this for a long moment. Closing and reopening services applet, I notice that both services are stopped. I googled about apache, the 1st thing I understood is to search error_log, opened it in gedit, nothing is written in this file.
View 4 Replies
View Related
Jan 9, 2009
I found and modified the following file. It starts JBoss just fine. However, chkconfig refuses to --add it - saying the file doesn't support it.
its in /etc/init.d, root:root, rwx,rx,r and the first few lines...
#!/bin/sh
# chkconfig: 345 100 25
# description: JBoss App Server
# processname: jboss
[Code]....
View 9 Replies
View Related
Apr 16, 2009
I recently setup a file sharing server with FC10 running Samba...
I got it running perfectly and it ran great for a few weeks. I was working on the machine today and tried to reboot it and noticed that it was stuck on FC10's new boot screen. I pressed the esc key and saw that the boot process was stuck on the smb service...
I don't get any errors and the machine doesn't freeze up or anything, it just hangs on the smb service and won't continue with the boot...
Is there anyway that I can get the system to skip the smb service so that I can get into the system? I don't know what's changed or what's causing this sudden hang in the system at boot.
I tried the ubuntu live CD to attempt to go in and edit the /etc/rc5.d scripts to try and skip the smb service start but I am not sure where to look for it...
View 4 Replies
View Related
Apr 12, 2010
i just installed Fedora 12, clean without anything change in it. I opened services dialog, and the openvpn service have status:dead, however it shows that it is enabled.when i try to run it as:/sbin/service openvpn start.It write OK. However if check it:/sbin/service openvpn status it write that service not running. What is a point of a problem? I have opened openvpn in FireWall,however without success, may be some additionsl services for openvpn are not running?
View 1 Replies
View Related
Mar 31, 2011
I am running named as a caching name server (package bind-9.7.3-1.fc14.x86_64 with config files exactly as supplied), and sometimes it does not shut down cleanly when I shut down the machine.The script /etc/ init.d/named tries to issue a "stop" command with rndc and that seems to fail most of the time; then it next uses the function killproc (defined in /etc/init.d/functions) which fails sometimes.I've hacked the named service script for now so that error messages are not hidden, but there is nothing reported.
View 2 Replies
View Related
Aug 15, 2010
Tonight i had the bright idea to upgrade from the previous LTS release to 10.04 LTS on my physical collocate in texas.
Ran do-release-upgrade --proposed per the ubuntu LTS upgrade guide, everything went smoothly, few random package issues with spamassasin and my apache configs but nothing that made me weep. Rand a apt-get -u dist-upgrade after to make sure nothing was missed and all was right in the world.
....Until i rebooted. Now my machine fails to boot and falls through to a (initramfs) prompt.
everything was hosted off this box and i'm desperate to get it back up. After hours of googling all i can find is info for DomU's with the same issue....but that has to due with the ubunut developers making 10.04 incompatible with older dom0's or something....and again this is a phyiscal machine.
My hosting provider has me booted into a RIPlinux rescue disk to work on this
Here is my fstab
Code:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
#/dev/sda2
code....
View 1 Replies
View Related
Jul 5, 2009
Has anyone noticed that when using NameVirtualHost's in apache that the service httpd restart command is broken?Also it seems system-config-bind has glitches too.
View 10 Replies
View Related
Mar 12, 2010
I am using Nagios 3.2.4 tool with Nagios-Plugins-1.4.14 and on Red Hat Fedora Linux ver 10.1.The Apache version is 2.2.11. My security team has identified the following vulnerabilities with this version and they want me to find a fix.
1)Apache mod_proxy_ftp Module NULL Pointer Dereference Denial Of Service Vulnerability
2)Apache HTTP Server mod_proxy stream_reqbody_cl Function Denial of Service Vulnerability
3)Apache HTTP Server mod_deflate Remote Denial Of Service Vulnerability
4)Apache APR and APR-util Multiple Integer Overflow Vulnerabilities
View 6 Replies
View Related
Aug 2, 2011
I am facing a problem with Linux fedora 9 mail server. I cant send any mails outside, since in log I found that
dsn= 5.0.0, stat = service unavailable
View 1 Replies
View Related
Feb 26, 2010
I'm using the RAID1 setup, which is configured in the BIOS, as it is a HP Proliant server. i have 2 500GB hard drives configured in a mirror. when booting the install, it recognises this, and deals with it fine.
The problem is, when it gets to the section of installing the grub2 boot loader, it just stops and gives me the "ubuntu installer main menu" where if i select grub boot loader install it just loops back, and if i select LILO installer, it errors, saying an installation step failed.
It has the option to skip installing boot loader, but then, can i get it to boot a different way? can i boot manually into the server install and then install GRUB and hope it works? can i install grub1 rather than grub2?
View 5 Replies
View Related
Mar 22, 2010
Alright, so I upgraded my old fedora 10 server to Fedora 11 with a netinstall CD, but now service httpd restart is broken. I already had to delete the old config file and reinstall apache, but now I can't restart it. I can kill it and then start it manually, but it never stops the running instance and fails to bind the port. I know it's because /var/run/httpd/htpd.pid is in the wrong place, which would be /var/run/httpd.pid, but do I have to make a symlink every time I want to restart it? I edited all the config files to point to the right place, but the system does not honor them. What do I do?
View 3 Replies
View Related
Jul 27, 2010
I've 7 PC's on my network. I've to setup an internal mail service, to send mails inside the network. I've installed Fedora 12 on one machine and the rest run's on Windows XP. What all packages do I need? How can I configure it?
View 2 Replies
View Related
Nov 17, 2010
I have one problem regarding my web server. When I am try to restart my httpd service it shows...
[root@localhost ~]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs [FAILED]
[root@localhost ~]#
View 2 Replies
View Related
Aug 20, 2011
hi, first i'd like to say that i'm totally new to linux, i was allways using windows.
as i was allways unable to install a good and stable ssh-server on windows, i thought it is time to change to linux. i was able to set up and configure a ssh-server on debian but found out, that fedora 15 looks more userfriendly in first place for me. but now i unfortunately experience problems..
the ssh server was already installed, i changed the service setting to that it starts automatically but after i succesfully connected to the LAN, i cannot access the shh via putty for instance. when i type "service sshd status" it says beside other things: active (running). but when i look at the /var/log/messages, it says those two lines:
sshd.service: main process exited, code=exited, status=255
Unit sshd.service entered failed state.
i searched on google without success, the only thing i found was that someone had the same problem with a bad sshd_config file, but i'm pretty sure that everything is alright with my config-file (i checked it several times).
beside this i cant login on the gui, after the firefox update (??) it always says: a problem has occured and the system can't recover bla bla... so i can only use fedora right now commandline-based.. but with this problem i will deal later on...
View 3 Replies
View Related
Jan 19, 2010
I just installed F12 from scratch and I'm facing a curious situation with dhpd. The service is enabled, but It fails to start on boot. I see the following error on /var/log/messages:
Jan 18 17:15:28 neo dhcpd: No subnet declaration for eth1 (no IPv4 addresses).
Jan 18 17:15:28 neo dhcpd: ** Ignoring requests on eth1. If this is not what
Jan 18 17:15:28 neo dhcpd: you want, please write a subnet declaration
Jan 18 17:15:28 neo dhcpd: in your dhcpd.conf file for the network segment
Jan 18 17:15:28 neo dhcpd: to which interface eth1 is attached. **
However service dhcpd start, works just fine when I login, after the system boots:
Jan 18 17:26:49 neo dhcpd: Internet Systems Consortium DHCP Server 4.1.0p1
Jan 18 17:26:49 neo dhcpd: Copyright 2004-2009 Internet Systems Consortium.
Jan 18 17:26:49 neo dhcpd: All rights reserved.
Jan 18 17:26:49 neo dhcpd: For info, please visit [URL]
Jan 18 17:26:49 neo dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in.
Jan 18 17:26:49 neo dhcpd: Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file
Jan 18 17:26:49 neo dhcpd: Wrote 0 deleted host decls to leases file.
Jan 18 17:26:49 neo dhcpd: Wrote 0 new dynamic host decls to leases file.
Jan 18 17:26:49 neo dhcpd: Wrote 5 leases to leases file.
Jan 18 17:26:49 neo dhcpd: Listening on LPF/eth1/00:30:48:80:2e:7e/192.168.1.0/24
Jan 18 17:26:49 neo dhcpd: Sending on LPF/eth1/00:30:48:80:2e:7e/192.168.1.0/24
Jan 18 17:26:49 neo dhcpd: Sending on Socket/fallback/fallback-net
So it can't be a problem with my dhcpd.conf file.
View 2 Replies
View Related
Jul 19, 2010
I am a Linux newbie using Oracle Enterprise Linux version 4 update 7 (its almost similar to Redhat Linux). While going through tutorials, I tried to configure the DCHP service and set it to start after every boot via the command
chkconfig dhcpd on
When I boot my Linux,the OS hangs when it tries to start the dhcpd service.Thus,I cannot log into my Linux and shutdown the service. How can I go around this and shutdown the DHCP service to enable my Linux to fully load after a boot?
View 2 Replies
View Related
Mar 5, 2010
I have setup a backup system on a NFS Server, and everything is working fine.Then, I decided to make changes to my backup script, and accidentally, I turned off both the NFS Server and Client without unmounting first.The NFS Server is working fine, but the client is having a problem. I cannot shutdown the nfs service. Here is what I get when I type "service nfs restart":
Shutting down NFS mountd: [ OK ]
Shutting down NFS daemon: [ OK ]
Shutting down NFS quotas: [ OK ]
[code]...
View 1 Replies
View Related
