However I seem to have lost my Network Manager! It's not listed in my System Preferences (only Network Connections is) so I cannot scan for new wireless signals etc. I only noticed when I was away last week, took my laptop with me. I don't have the little wireless icon in my panel either (that I used to click on to find new networks).
I have a Dell Inspiron 6400 that runs an Intel Wireless Pro 3945 AGB driver.
This is my fourth on-line upgrade from Gutsy (started with Dapper ...) all the previous one went without a hitch !
So I was pretty confident this afternoon upgrading my Lenovo laptop from 9.04 to 9.10.
At one point during the install, I got error messages and was offer to do a "Partial Install". I accepted, different things happened, rebooted. Update manager came on with again the partial update pop-up. Accepted it again, it downloaded more files, rebooted, partial upgrade window again but it failed immediately.
The network connection was gone, clicking on the network icon I got a message that the network manager is not running.
I cannot check or uncheck the "network unabled" choice.
However, 9.10 is running, slow and weird, but no network connection so I cannot try to finish the "partial upgrade"
Every time I reboot the Update manager pops up.
Trying to boot any previous version in "grub" fails right away saying it is unable to mount the drives ...
Is there a way to start the Network Manager from a terminal ?
I've accidentally deleted the network manager icon from my panel. It's still working - I'm getting a network connection - but I'd like the icon back.
I've tried re-starting gnome - the recommended soluton - but not joy.
In my top bar (where i also have the, bluetooth, sound time and date and so on icons) i have lost my icon to manage my network. Wired, wireless and VPN. How do i get it back?
View 5 Replies View RelatedI thought to uninstall Gnome Network manager since it was always asking for to connect with wireless internet but it was working fine with wired internet.I uninstalled it and installed wicd. and then for some unknown reasons the internet disappeared.Kindly let me know How can i get back network manager without having internet and make internet work on my computer.I did searched a lot on Ubuntu forums using somone's else computer but no success.So if you let me know how to approach the problem in right manner it shal be great .
View 6 Replies View RelatedI had trouble connecting to a wireless network with openSUSE, so I tried the YAST network manager to see if that fixed it. Not only did it not fix it, but now I cannot connect to any network, wired or wireless. I tried to open the default network manager and it said "Network management disabled". How do I re-enable it?I also have set YAST settings back to their originals with no luck.
View 7 Replies View RelatedI was playing tf2 when my window manager went all crazy. i restarted and now I have nothing.
View 1 Replies View RelatedI installed the elementary theme and played with it. Unfortunately, I accidentally remove the icons in the file manager. Refer to attached image.How will I display the icons, menus and address bar again?
View 2 Replies View RelatedI have been trying to lighten the load that Ubuntu uses on my RAM and processor, and decided to try LXDE, as it is the lightest-weight DE that I have tried and liked. I noticed I didn't have any wireless connectivty under LXDE, so I checked the LXDE site for the solution, and it said to download and install LXNM, which supports wireless connections. Unfortunately, installing LXNM (apt-get install lxnm) also uninstalled nework-manager, and network-manager-gnome, on top of lxnm not working properly, and stranding me without any way of reinstalling the OS, and without an internet connection (I can't connect with a wired connection, either). Is there anything I can do, aside from reinstalling?
View 5 Replies View RelatedI lost my kde session manager (for kde3 and kde4), and now Kubuntu 9.10 only will boot to run level 3. This occurred when I used the synaptic package manager to remove all the kde 3 desktop, to then allow an upgrade to Kubuntu 10.04 version, due to a error message about that kde3. I was able to log into either kde 3 or 4 before this, so what do I type in that text mode run level 3 to fix this issue, and to have my KDE session manager back working ? Or do I now need to install a fresh Kubuntu 10.04 with only KDE 4.?
View 4 Replies View RelatedI lost my kde session manager (for kde3 and kde4), and now Kubuntu 9.10 only will boot to run level 3. This occurred when I used the synaptic package manager to remove all the kde 3 desktop, to then allow an upgrade to Kubuntu 10.04 version, due to a error message about that kde3. I was able to log into either kde 3 or 4 before this, so what do I type in that text mode run level 3, to fix this issue and to have my KDE session manager back working ? Or do I now need to install fresh 10.04 ?
View 7 Replies View RelatedI've been trying to understand how Linux creates the network/interfaces on a machine (been reading the Linux admin guide), but as I'm pretty new to this subject, I've got lost in the forest.
To provide with my goal:
1.) Learn about network setups on Linux
2.) Be able to maintain my own (virtual) network
3.) Configure my (virtual) network
Installed a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).
View 9 Replies View RelatedI was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
Last night while setting up wired & wireless connection in openSuse 11.2 Gnome version via YAST's ifup, I got wireless but lost wired connection (interface eth0). Dmesg shows that eth0 became eth1. I cannot get eth0 back. Is there any way to remedy this situation, eg. get info from the Ubuntu partition in my triple-boot laptop, without having to re-install openSUSE?
View 3 Replies View RelatedI'm using Karmic 9.10 and think my original software source list has been removed. Have done all updates recently including Gnome do and standard ones. Think my software update karmic main and restricted universe list is somehow corrupted. With Karmic main showing Open office through the middle of the line. Tried putting in the Ubuntu 9.10 cd to update list but I don't know where to go from there as I'm new to certain stuff.
View 4 Replies View RelatedThe default file manager (nautilus) is no more there. When I click on my home folder, it is opened by dolphin...how can I get back the default?
View 7 Replies View RelatedI recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
Code:
#!/bin/sh
case "$1" in
[code]....
I am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...
Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.
P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies View RelatedI have the problem with my notebook, that, after I used it at work, the network-manager always tries to autoconnect after boot. He has no cable network and so I get the message "not connected" after a while.how to tell the network-manager, not to autoconnect each time?
View 4 Replies View RelatedI recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
i looking to replace network manager on my laptop with another wireless program. iv been looking at Swscanner, Rutilt wlan manager, and wicd network manager. iv had trouble with network manager not being able to connect or losing connection fairly easy. im using a gateway m6843 running ubuntu 10.04 32 bit os.
View 2 Replies View RelatedYhe only ptoblem was that he had forgotten the password to his network. This was really anoying and has happened before sp yesterday i decided to install some kind of WEP cracking tool so that it would not happen anymore.. After using sometime without getting anything to work i found this tutorial: [URL]
and started following it. i only got to the point where he has updated his computer using update manager and is about to patch his wificard. Then i noticed that the network manager for gnome was gone and the virtualbox logo in my top panel was changed to a red circle with a line running through it. I have tried to download network manager from another computer and installing it on my laptop but it needs internet to install. Then i tried to connect to my local network using terminal that did't work either i also tried connecting using a cable but had no luck connecting. The command iwconfig gives me:
[Code]....
My wifi connection drops sometimes and, for some reason, Network Manager attempts to connect to my neighbor's network, which requires a password (which I don't know). Is there any way to blacklist a wireless network so that the Network Manager will never attempt to connect to it?
View 4 Replies View RelatedHow do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.
View 3 Replies View RelatedI've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies View RelatedI am using an Acer Aspire 5536 AMD dual core laptop with a 64bit installation of Susie 11.4. Using 11.2 I had no problems connecting to the wireless router. As soon as 11.4 was installed, clean install, and the laptop rebooted, network manager failed to start, until manually invoked and then enabling networking through the system tray. Even after this it will not connect to a wired or wireless network sometimes for more than 30 minutes.
View 9 Replies View RelatedI tried to install suse 11.4 on the new gnome desktop 3. everything seems to work except the network manager. Is not present in the bar and I can not restore it. tried to reinstall network manager but to no avail.Does anyone know how I could solve this problem
View 1 Replies View RelatedOur corporate wireless network uses continuously changing passwords with RSA tokens.So every time we need to connect to the wireless we need to enter a new password off the RSA token. For extra fun using the wrong password a couple of times in a row causes the users account to be locked.Network manager automatically stores and reuses the password, with the net result that it is constant getting my account locked.Is there some way to prevent it from storing my password for that network?
View 1 Replies View Related