Ubuntu :: Laptop Vaio VPCF136FM Nvidia Not Recognized After Update 10.10 Rc
Oct 7, 2010ubuntu 10.10 rc worked perfect with my video card until last update oct.5.2010.is there something i can do to undo the updates?
View 1 Repliesubuntu 10.10 rc worked perfect with my video card until last update oct.5.2010.is there something i can do to undo the updates?
View 1 RepliesI installed Ubuntu 10.04 on my new Sony Vaio series S but it does not recognize my wireless card (I think). The button is on, but the light does not turn on, and it does not detect the wireless card. The wireless card, an Intel Centrino Advanced -n 6205, does work in ubuntu and when I run the command: lshw -C network, it appears UNCLAIMED, that I think it means the drivers are not in the Ubuntu libraries. What can I do to make it work? I've been struggling but I cannot make it work.
View 9 Replies View RelatedI have installed Ubuntu (both 10.10 and 11.04 pre-release) on my laptop but my battery is not recognized and it is detected as a desktop system rather than a laptop. I have tried the cat /proc/acpi/battery/BAT1/state method but the directory doesn't exist. I have tried another guide to paste the battery info into this directory but it doesn't allow me to do that and says that the directory doesn't exist, even though I'm trying to make it. I tried it in root nautilus and even on an install of Lubuntu (with a root file manager) but it still failed to budge. I really don't know what to do as I have tried all the guides on the internet that I could find.
View 4 Replies View RelatedI am running Ubuntu 9.10 from the install CD on a Vaio VGN TX650P laptop to try it (my first time with Linux so please bear with me) and it all works EXCEPT it is not recognizing my wireless connection.I went to Ubuntu Help and in Section 5 - Wireless Troubleshooting, Check for Device Recognition, it recommended:1.Open a Terminal (Applications → Accessories → Terminal) and type the command: sudo lshw -C networkYou should see an output, along with the words "CLAIMED, UNCLAIMED, ENABLED or DISABLED"What I get is below (It also lists the ethernet connections as network 0) but I don't see any CLAIMED etc.
"*-network:1
description: Wireless interface
product: PRO/Wireless 2200BG [Calexico2] Network Connection
[code]....
I've just acquired a Vaio PCG-FX801 with Phoenix bios version R0121K5.In the boot order, it lists "+Removable Devices", but on expanding the menu, only gives "Legacy Floppy Drives".I only discovered this after unsuccessfully trying to boot from a stick with the 10.10 netbook iso on it.Is it possible to get round this,or should I put the iso on a cd,or should I download the desktop iso onto a cd, and use that? I want to try it out on this laptop before installing it.
View 8 Replies View RelatedI am having problems with the brightness control on my sony vaio laptop, at virst when i upgraded the driver for the VGA card the whole screen went blank, I had to port a bin file from windows and write my own EDID file to get it to work (nVidia GT 230M), but I am having problems with the brightness, although ubuntu does read the input from the keys (FN+...), the brightness refuses to change, adding the brightness applet to the taskbar does not work either. I really need to be able to change my brightness because the battery usage is off the charts.
View 1 Replies View RelatedI've bought Sony VAIO F11 and I can't find any driver for video card. Is it possible to configure 195.XX NVidia driver for this card? It doesn't work now ;(,
View 1 Replies View RelatedI have finally got both video drivers working. Is it me or is the quality of the Intel drivers almost better than the nvidia? I will try something with hardware acceleration soon but the 2D (compiz etc) all works really well.
View 1 Replies View RelatedI've a sony vaio Y21S1E and I can't install opensuse in graphic mode (I got a black screen just after the loading page...). So I installed it in text mode, but on reboot, I have exactly the same problem... I had a look in the logs but I found nothing ... My Xorg.conf seems to be OK (intellegacy)...
View 9 Replies View RelatedI successfully before install Ubuntu on my last laptop along with windows vista and it was rather easy because ubuntu allowed me to partition the disk so simply. However, on my vaio, my whole hard disk is partition and there is no unallocated space. It will not allow me to partition the disk and when I boot up the ubuntu live cd to install, the partitioner doesn't look the same and I'm hesitant to make any changes because I'm afraid I'm going to damage my data. I have a 500GB HDD in which I want to use just 60GB for Ubuntu and the rest for Windows 7. Also, I'm running 64-bit Windows if that matters at all.
View 3 Replies View RelatedRecently I install ubuntu 10.10 on my Sony Vaio laptop. After the CD boot I always got a black screen, after a week i figured that there's nothing wrong, it's just the screen doesnt show up on my laptop's screen. So I use an external monitor and It showed up as normal.
But I need to have it show up on my laptop's screen. I tried to use "additional driver" to activate latest Nvidia driver but after that even my external monitor doesnt work too. Latest driver doesnt work properly i guess. I did try to install older driver version manually but after I turned of gdm, install driver and reboot, my ubuntu always starts with tty1 command terminal. tried ctrl+alt+7 but it stucked at (checking battery state), startx doesnt help me return to graphical screen too.
I got help from a moderator here but the best result so far is to edit my /etc/default/grub. Change
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
to
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset"
Sudo update-grub
after the reboot I have it shows up on my laptop's screen. But it seems low-bit color,a bit grand to me(compared to external monitor, both w/o driver). Anw i checked system/preference>monitor . It showed up that my monitor:unknown. I can't choose other resolutions, refresh rate = 0.
I always know its my widescreen is the problem. I have had a lot of problems dealing wgames/application (on windows) can't work on 16:9 mode. install a stable Nvidia driver
Everything I tried in the past weeks is in here [URL] My laptop is SONY VAIO VPCCW19FX, Nvidia GeForce GT 230M, widescreen monitor
I have a sony vaio laptop(model-VPCCW27FX) 64 bit.I am currently using windows 7 os. I tried installing ubuntu using wubi and also by making a bootable disc. The installation proceeds well. When I restart my laptop, it asks whether to start windows or ubuntu.But, when I select ubuntu, the screen goes blank.
View 1 Replies View Relatedthere is anyone who successfully installed Ubuntu 10.10 on a Sony Vaio VPCZ1 or similar.It has a NVIDIA GeForce GT 330M GPU with CUDA Technology (SPEED MODE) and Intel HD Graphics (STAMINA MODE) (switchable)The Processor is an Intel Core i7-620M with 2.66 GHz
and the Chipset from Intel HM57 Express chipset.All I got is a working VESA mode but otherwise I end up with a black screen or a prompt.
I tried to installed OpenSUSE 11.2 "i586" on an older Sony Vaio laptop (model PCG-XG9) with 20 GB HD and 128 or 256 MB RAM. There is no ethernet port, but I have a PCMCIA WLAN card "Cabetron RoamAbout 11 Mbit/s", which should work perfectly with any Linux. The computer had Win98 on it originally (which, of course, after all installation attempts is now destroyed). The problem is that I cannot install to the end at all - no matter what I try:
1) Having the disk as a single FAT partition (made by a Win98 installation CD), it appears that the installer cannot create the correct partitions needed for Linux.
2) Having deleted the DOS partition with FDISK from Windows98 - which is like buying a completely new, unformatted HD from a store. But again, it cannot automatically set the partitions...
Is there a manual / instruction page somewhere how I should partition the disk manually (how to do it, and what sizes are recommended for each partition)?
I have sony vaio laptop which is vista preloaded. But I don't want windows vista and want to install ubuntu and windows xp on complete hard disk. Can I remove window vista completely? Will be any problem in future if I remove vista completely? And at last, is my laptop hardware vista completable and may give problem? I urgently want ubuntu and don't want virtual os as ubuntu...
View 2 Replies View RelatedI'm currently installing Slackware 13.1 on my old Sony VAIO. It's got a wireless card sticking out the side of it, and I just want to make sure I set it all up correctly. I got to the screen where it's asking:
static IP
DHCP
loopback
And I'm not sure which one to pick.
This is what I get w/ lsusb:
linus:~ # lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
I just bought sony vaio laptop(EB16) couple of days before.I had window 7 OS. Two days before i downloaded Fedora-12-x86_64-DVD & installed in my PC.Everything is working fine except when i play any video or audio file such as .avi, .mp3 from any player such as vlc player, movie player ,xine etc , i don't get any sound.I tried to search this problem in internet but still i am not able to resolve this problem.
[Code]...
I am trying to build a linux box from an old Dell Optiplex GX240 that I got for free. I have gone out and bought a Sparkle Nvidia GsForce 8400 GS PCI video card for it but am having trouble getting it installed properly. It seems that the card is not recognized by the computer. The command lspci shows no signs of the new video card. I have installed the lastest Nvidia driver (huge PITA) but as expected this did not change the fact that the computer cannot see the new card. The card is rated for 350W and I have a 500W power supply so I should be good there. I have also changed the BIOS settings to auto detect the video card instead of just the stock one. Is my card simply incompatible with my motherboard or are there ways to get this card to work?
View 8 Replies View RelatedI have installed Ubuntu (both 10.10 and 11.04 pre-release) on my laptop but my battery is not recognized and it is detected as a desktop system rather than a laptop. I have tried the cat /proc/acpi/battery/BAT1/state method but the directory doesn't exist. I have tried another guide to paste the battery info into this directory but it doesn't allow me to do that and says that the directory doesn't exist, even though I'm trying to make it. I tried it in root nautilus and even on an install of Lubuntu (with a root file manager) but it still failed to budge. I really don't know what to do as I have tried all the guides on the Internet that I could find.
View 5 Replies View RelatedI have been having an unusually fraught time trying to installing Linux on a new box (Dell Precision 5500, Nvidia FX 3800 graphics), x64_86. After following Leigh123Linux's recommended method for disabling Nouveau, I was able to verify that the nvidia module was loaded, Nouveau was not, but the system nevertheless hung at boot. As a last resort I downgraded the graphics card, replacing the FX3800 with an FX1800, et voila!, the drivers found the card and all was it should be, with no changes to the system configuration. This is a bit mysterious as the FX 3800 is purportedly a supported card. The only sign that anything may have been amiss during the installation was the missing firmware warnings:
W: Possible missing firmware aic94xx-seq.fw for module aic94xx.ko
W: Possible missing firmware ql8100_fw.bin for module qla2xxx.ko
However, it's not clear that this is of any consequence. For now, my FX 3800 is back in its anti-static bag for the foreseeable future..
I'm a brand new user of Debian, and I just bought a (too much?) new laptop, the HP 430 G2. It seems to work great for almost everything, except that I don't have any wifi available.
I tried so many different things (without any success) that it would be hard to resume. But for now, all I have is a new installation (to avoid parasite installations of weird things), and a kernel updated to 3.16. I don't know if it's useful though...
Some information from my system :
Code: Select allbonyhoax@bonybook:~$ sudo ifconfig
[sudo] password for bonyhoax:
eth0 Link encap:Ethernet HWaddr 14:58:d0:09:72:bd
inet adr:130.125.57.144 Bcast:130.125.57.255 Masque:255.255.255.0
adr inet6: fe80::1658:d0ff:fe09:72bd/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:27329 errors:0 dropped:0 overruns:0 frame:0
TX packets:3491 errors:0 dropped:0 overruns:0 carrier:0
[Code] ....
The first element I notice is that I don't have the line with "Kernel driver in use...". Which seems to indicate that there's a problem with the kernel module (is that right?). But I don't know how to fix it...
The other thing that puzzles me with these last two commands is that according to this page, my wifi card is a Broadcom BCM43142. But it's not the result I get with the lspci command.
Anyway, I'm really lost, I don't know what to do, what to check, what to install. I don't want to go by random, testing all the different solutions I see on the web blindely. This is the reason why I ask it here.
I changed my old video card for a newer in order to use all the resolution of my screen 1920X1200 and not 1920X1080, in my just installed 11.2, rebooted and got to log in graphic mode,looks good. But isn't. It is working because the new card is seen as the old !How can I get the new one to be recognized, and acces the newresolution ?
View 1 Replies View RelatedAfter running an update in my 10.04 installation, both cdrom drives are not recognized anymore and won't even open when i push the eject button. Also, a 2TB storage drive is not recognized any longer and the computer won't even boot if that drive is plugged in..
View 5 Replies View RelatedI am running Wheezy 7.9 32 bit, with the kernel Linux 3.2.0-4-686-pae, and Gnome 3.4.2 on an Intel Pentium CPU G3420 @ 3.2 GHz. I installed a new printer in August, an HP Officejet 7612 all-in-one printer/scanner/copier, and it worked perfectly as both a printer and a scanner first time, despite not being listed on the supported list in SANE. Two weeks ago, I got a general software update notification, and did the update. Now the scanner is not recognised. The printer still works fine as a printer, but when using Simple-scan, I get the error message "No scanners detected. Please check your scanner is connected and powered on". I have had a look round on Google, and all the suggestions made do not work.
I tried the suggestion to add myself to the scanner users list on my PC which made no difference (even though the scanner previously worked without my being added to the scanner users list).
I have deleted the printer and re-installed it using CUPS, but that still has no effect. I tried re-installing HPLIP also to no avail, and I have now lost the toolbox on the drop down menu under <Applications> <Accessories> <HP Toolbox>, as when I click on it, nothing happens.
It would seem that something in the update has messed up Simple-scan. Looking at the dpkg log (is this the right thing to look at?) for the date of the update, I cannot find anything which directly involved SANE, so I think that it might be something else which has affected SANE. How I can find out which update did the damage? I don't normally do anything except accept recommended updates, so I am a bit lost as to what to do.
I am looking to buy a laptop for my college years, so I would like to buy one that will serve me many years ahead. Currently the only laptop I have found is the System76 Serval laptop, but they do not ship to Europe.
Another laptops I have found are the Toshiba A505 series, but they are not currently supported by the latest version of Ubuntu.
I anyone knows of a good laptop (must have Corei7 processor and Nvidia/ATI powerful card fully supported by the proprietray drivers), please share your knowledge here.
Pretty self explanatory, I can't get the NVidia driver to work with my laptop's 310M. And yes I have tried both steps in .64&postcount=9, but to no avail. The two error messges I'm seeing are "(EE) No devices detected." and "Fatal server error: no screens found".
View 3 Replies View RelatedI'm trying to get my Sound working with HDMI-connection. Got an Nividia 8600M GT on Ubuntu 9.10. Here is what aplay -l says:
[Code]....
I recently installed Kubuntu 9.04 Jaunty on my buddy's laptop. It's working alright, except when we try to plug the external computer speakers into the sound jack in the front, there is no change; it keeps playing through the onboard speakers. My friend and I are getting pretty frustrated because we use those speakers to watch movies with, and the onboard speakers aren't sufficient. If I need to provide any other info, let me know and I'll do so.
View 4 Replies View RelatedI have an Asus UL80vt laptop. This laptop has an integrated (Intel) as well as a discrete (Nvidia 210m) graphics card.
I want to use the nvidia proprietary drivers because from what I understand, it's the easiest way to set up dual monitors (I have an external monitor). I installed the latest nvidia driver: NVIDIA-Linux-x86-190.53. When I try to run the NVidia X Server Settings GUI, it tells me that "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. "
I checked out my xorg.conf and changed the device driver to 'nvidia' instead of 'nv'. Curiously, when I run nvidia-xconfig, it changes the intel device to 'nvidia' which is a problem. So i skipped running that and just stuck with my xorg.conf. When I run startx, I get a message saying "failed to initialize the NVIDIA graphics device PCI:1:0:0".
I've combed through multiple forums which state different kinds of solutions and I've tried different kernel options such as 'vmalloc=512m' or 'noapic' to no avail.
P.S. I've attached my xorg.conf file