I opened a thread but I think it was on the wrong place. Anyway I have a problem with harde disk space, here it is: I got a new server and checked for empty space after isntalling some stuff. here is the result:
Code: debian:/var# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 455G 47G 385G 11% /
[code]...
Some thing is using up a huge amount of my disk space about 10G and I can not determine what it is. When I look at my disk usage in system monitor it say I have used about 25G and when I scan the directory in disk usage analyzer the entire file system used is 15G.
View 1 Replies View RelatedWhat is the most efficient way to match the partition tables on two different hard disks?
I have saved the partition tables using dd command in linux.
The partition tables are from a Windows system.
ran out of space in my /home dir. Have a second hard drive to install and would like to designate it as additional space for /home. I do not want to mount it as a dir inside my home I would like it to simply work as though my /home simply has more space available to it.
View 1 Replies View RelatedI recently bought a new pc and installed Ubuntu on it. It came with a 500gb hard drive and during installation I manually partitioned it as follows:
10 gb (ntfs) for a windows partition
15 gb (ext4) mounted on /
4 gb for swap
the rest (470gb - ext4) mounted on /home
I've just installed a few apps from the repository, nothing big (about 500 mb in all), but in the 'file system' tab in 'system monitor' it says that for /home I have a total of only 432 gb, of which just 408 gb are available, with 500mb used. According to this, around 60gb of space have just vanished into thin air. Where did all this missing disk space go? The disk is brand new and there are no bad sectors in it.
I am the sole user of my laptop and i have the following hard disk space
Code:
Device Directory Type Total Free Available Used
/dev/sda7 / ext4 18.8GiB 15.4GiB 14.5GiB 3.4GiB
/dev/sda8 /home ext4 33.5GiB 7.2GiB 5.5GiB 26.3GiB
Now i want to use the free space in /(root) by moving files there.But i cannot create a folder or file in /.How do i go about this?
have Debian "testing" installed. During the installation I selected to have a separate /home partition. / partition is ~10Gb, and my /home is ~300Gb. I didn't think I would need more than 10 for /.The other night, Debian informed me that I had 0 bytes remaining on /. I purged /temp an went about my day, only to be greeted with the message again the next morning.I've tried shrinking /home and increasing / via an Ubuntu live CD with GParted, but for some reason it did not want to work. However, I am beginning to suspect that my /home folder is occupying the / partition, and not the separate /home partition.Output of fdisk -l
Code:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1216 9764864 83 Linux
/dev/sda2 1216 38914 302803969 5 Extended
/dev/sda5 1216 1974 6082560 82 Linux swap / Solaris
/dev/sda6 1974 38914 296720384 83 Linux
Can some one tell me how many space does a plan CentOS 5.4 take and the minium size of the memory.
Also, what is the minium size I have to partition on /boot
I currently dual-boot Win7 and Ubuntu 10.04, before I came back on Ubuntu, I uninstall-ed many programs to free up some space. Before I restarted my computer to boot back into Ubuntu my Internal HD had 43.5GB of free space, and when I booted into Ubuntu I checked the free space and it only showed 7.9GB of free space, did I check the wrong thing? Is 'File System' the Ubuntu equivalent to the C: drive in Windows?
View 9 Replies View RelatedMy computer has Windows and Ubuntu operating system and each is located in separate partition (dual boot).Now the disk space of Ubuntu partition is about to run out. I wonder how I can increase the disk space of Ubuntu partition.
View 9 Replies View RelatedI have a 1 TB hard disk(external). When i see the properties of hard disk ,its showing
total---931.5 GB
used----916.9 GB
free----14.6 GB
When i see ,using disk usage analyzer,its showing: total---832.7 GB
Is there any way of getting back free space?
I am attaching screen prints of properties and disk usage analyzer.
I recently decided to wanted to switch from windows to ubuntu 11.04 since linux can do the same work as windows for me. While going with a fresh installation of linux by itself I noticed that instead of my original laptop hdd space of 350gb it said allocated 320gb. I went with the install and now that it is ready the disk manager says I have 280gb space what is this please? Should I reinstall ubuntu to get the missing hd space ?
View 3 Replies View Relatedrunning ubuntu 8.10 amd64 on my HP intel 2.26ghz dual core processor, 320gb hdd and 4gb ram. My main problem is that when I dual booted ubuntu onto my laptop, I had vista already installed, so I only set aside 20GB of hard disk space for ubuntu, which seems like more than enough to me. What's going on is that it says I have used all my space and only have one GB left, when the only thing I have on my computer are word files and necessary installs like flash player, compiz, avant, etc.When trying to hunt down what was using all my space, first I checked out the disk usage analyzer (some pics from here in):theres my hdd with 1/19 gb remaining here's a breakdown of my home folder, showing that it's not using very much at allhere's my filesystem, now we can see that all the space is being used in the folder: /var
View 9 Replies View RelatedWhen level 3, we can use only command. What can I do to check for Hard Disk usage such as used space, free space, total space.
View 4 Replies View RelatedI am using LVM2 and have shrinked my /home partition and extended my / partition but I'm not sure if I used all the free space when growing my / partition. How can I find out? I prefer using the terminal if there is a graphical way to do this but I would like to know both ways if there are two ways.
View 3 Replies View RelatedI have tried to plan my backup plans. As I want it simple I am gonna use only tar.gz combination of some files that are important. My question then is the following:
-I have a 100GB hard disk with 20Gb free space only. I would like to backup the rest 80Gb to an external hard disk. I run my scripts which end up saving a 75Gb(due to compression) to my external hard disk.
-->Then comes the times to try to see the contents of my archive (just to make sure that I can recover what is inside the 75GB disk file). Do you know if tar.gz needs to decompress the 75Gb file in some /tmp space in my hard disk for showing me the contents inside it? In that case it will not be easy at all to ever look at what is inside it in my hard disk, as there is no 80Gb of free space in my hard disk (20gb only).
I set up a Windows partition and an Ubuntu partition in my laptop and each partition has about 60 gigabyte of disk space. Recently I keep getting messages that the disk space in my Ubuntu partition is almost full. How is it possible since I only have computer programs which I absolutely need?
View 1 Replies View RelatedI recently installed Bio-Linux 5.0 as a dual boot system with XP for some bioinformatics applications, but Im having some problems with the amount of disk space which can be allocated specifically for the Ubuntu install.
I partitioned a 250 GB portable hard drive into:
/dev/sdb1: 154.76 GiB (with 30 GiB allocated for Ubuntu)
/dev/sdb2 : 78.13 GiB
Ive been using blastclust to analyse some very large data sets, which keeps on crashing due to filesystem running out of disk space.
When I installed Bio-Linux 5.0 from the live cd, the maximum size I could allocate to the install was 30 GiB, and I havent been able to find a way to change this.
Ive tried using System->Administration->Partition Editor using the live cd, and can view / delete the partitions, but I cant find a way to specifically alter the disk space allocation for Ubuntu.
How do I increase the filesystem size to larger than the current 30 GiB?
For our workgroup I set up a server which is basically 10.04.2 with kernel 2.6.32-32-server on a SSD and all the data on a RAID 5 consisting of 4 2TB hard disks, thus a maximum of 6TB space for data on the RAID. Having multiple users with different amounts of data from different scientific data source I set up an lvm on top of the RAID
--- Physical volume ---
PV Name /dev/sdb2
VG Name home-data
PV Size 5,45 TiB / not usable 3,00 MiB
[code]...
Here is the problem: The volume Genomes (or /genomes) is half full
sudo df -ah
/dev/mapper/home--data-Genomes
1,9T 850G 920G 49% /genomes
but the system states it as full whenever I try to add more data (tried cp and rsync). There is no quota set to the volume (I have quotas in place for users home folders. These are only for max amount of disk space, not max file number, and I am still able to move/add files elsewhere so there seems to be no interference).
I have set up squid server. My cache directory has been set up as per following statements.cache_dir ufs /Cache1/squid 10000 16 256cache_dir ufs /Cache2/squid 10000 16 256Now the problem is that size of /Cache1 and /Cache2 has reached to about 8GB and in near future it will reach the maximum limit of 10GB. I just want to know that whether I need to delete the contents of these directories or otherwise.
View 1 Replies View RelatedI had Vista on my laptop and then started dual booting with windows.downloaded ubuntu today and installed but just not feeling it. i have looked in add remove programs but its not there. can someone point me in the right direction. How do i remove ubuntu including the grub screen and free the space up on the hard disk because i'm missing 25gb.
View 4 Replies View RelatedDebian and debian based distros issue has a issue that has come to make it self aware to me when I was trying to burn a video on my hard drive with braseo and it won't let me burn more than 4.4 gigs to a dvd with 4.7 gigs of free space even a file that is over the 4.4 gig limit by a megabyte with windows i didn't have this problem. One more thing I have 16 gig flash drive and on debian and debian based distros i can only use 13.1 gigs of it but on fedora I can use all 16 gigs.
View 3 Replies View Relatedafter installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View RelatedI want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View RelatedI have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies View RelatedI had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View Relatedroot@localhost:~ $ df /dev/sdb1
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sdb1 1922858352 23247088 1801935664 2% /mnt/external/sdb1
[code]....
In trying to solve a friend's lack of foresight, i have currently disabled my system.
I was using dd_rescue to make a copy of a drive with a corrupt and unfixable Partition Table. I was a fool, and had a drive mounted to /media/Storage, but ran the backup to /media/storage.
Thus, dd_rescue completely filled my primary drive before informing me that there was a problem.
I don't really trust myself with command line work, so I foolishly sudo'ed nautilus and deleted the folder /media/storage.
Unfortunately, I didn't realize it, but the available space on the drive still read 0bytes.
I tried Terminal work to do a sudo apt-get clean command, but for some inane reason, the laptop screen won't support the display setting for the Terminal login, so I just had to hope that I was doing it right.
I wasn't, and decided to try working from a Live CD so I could see what I was doing.
the folder /root/.Trash/ doesn't exist on Ubuntu's install drive, and I can't figure out why the properties of the drive say "contents: 241310 files, 3.7 GB" but also "Total capacity: 52.8 GB. Free space: 0 bytes"
Any suggestions on how I can get this to shake out?
I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
i have a file like this
# comments
#comments
#comments
bla bla
[code]....
i want to grep lines which do not start with # or a blank space. like
bla bla
bla bla
how do i do this? i tried grep --invert-match '^#' which gives lines not starting with # but gives me blank lines too i tried grep --invert-match '^#|^ ' which will give lines not starting with # OR not starting with blank ( which means any line including ones starting with #
