Ubuntu :: Intltool Scripts Were Not Found?
Aug 11, 2010when i m configuring it says
The intltool scripts were not found. install intltool.
ADVERTISEMENT
Debian :: Error: The Intltool Scripts Were Not Found
Jul 20, 2011I try to compile pidgin but I have this error:
checking for intltool-update... no
checking for intltool-merge... no
checking for intltool-extract... no
configure: error: The intltool scripts were not found. Please install intltool.
what is the intltool ( I search to web but couldn't understand it!)
This isn't in my repositories DVD so Where I can find it? ( I use lenny ) This file must be install on my system or must be in compile file?
Fedora :: Mock Errors Your Intltool Is Too Old / Command Not Found?
Jun 27, 2011I am trying to rebuild packet with mock
Code:
mock rebuild -r fedora-15-i386 rpmbuild/SRPMS/deadbeef-0.5.1-1.fc15.src.rpm
and getting following error in /var/lib/mock/fedora-15-x86_64/result/build.log:
checking for intltool >= 0.40.0... ./configure: line 22040: intltool-update: command not found
configure: error: Your intltool is too old. You need intltool 0.40.0 or later.
code....
Ubuntu Installation :: Error "intltool Is Too Old. You Need Intltool 0.35.0 Or Later"
Aug 2, 2010I'm trying to compile banshee but when i run ./configure i get this message: checking for intltool >= 0.35.0... ./configure: line 4377: intltool-update: command not found found configure: error: Your intltool is too old. You need intltool 0.35.0 or later. so i open up the package manager to check intltool and it's version 0.35.0. i don't know if i'm a bit dim and missing something obvious or if my computer is just angry with me or what.
View 7 Replies View RelatedUbuntu :: How To Upgrade Intltool
Jan 8, 2010I need to upgrade to intltool 0.35 or newer, i and i have downloaded the source code but i don't know what to to do next
View 1 Replies View RelatedUbuntu :: Compiling Source Code Error "You Need Intltool 0.40.0 Or Later"?
Jun 5, 2011Just switched over to Ubuntu 11.04 32bit. I have spent the day configuring it to my likings, and am content with Ubuntu. I have zero experience with coding, and bare minimum knowledge. Anyways, I have gotten some tar.gz files, that I have extracted them into folders, and then in terminal I run ./configure, and then I get the error "You need intltool 0.40.0 or later".
View 2 Replies View RelatedUbuntu Multimedia :: 06a2:0003 Topro Technology - No Camera Found - Skryba Says No Devices Found
Mar 29, 2010I have been trying to get this web cam working for a long time. lsusb:
Code:
Bus 004 Device 003: ID 06a2:0003 Topro Technology, Inc.
dmesg
Code:
[ 1990.570050] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 1990.751460] usb 4-1: configuration #1 chosen from 1 choice
Kernel patch: [URL]
Driver project: [URL]
Cheese simply says no camera found. Skryba says no devices found. Since this kernel patch was 2009-04-07 which is nearly a year ago it should be in latest kernel?
[Code]...
Ubuntu Servers :: 9.10 2nd Ethernet PCIe Adapter Found Then Not Found?
Jan 24, 2010During install of 9.10 server, both ethernet adapters were found. One is built-in to the motherboard, the second is on a PCIe slot. Selected the on-board adapter for eth0 during install, set fixed IP on the web, connected, updated, etc. w/ no problems. The second adapter is for the LAN.BUT, on first and subsequent reboots after installation complete the second adapter is not detected at all, as if it were not even plugged into the PCI or the driver not loaded. This happens on either of two slots, with two different adapters, Intel or Netgear, both pretty recent, and both of which are detected and work in a different box. 'Ethtool eth1' says device not found.This is a fairly recent motherboard 3N78EM).Since the adapter was found during installation I'm assuming that the problem is not with not the board. I've built several server systems with two or three ethernet adapters and have never run into this situation.
View 3 Replies View RelatedOpenSUSE Install :: Installed Program Not Found - Kmess: Command Not Found
Oct 1, 2010I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
Fedora Servers :: When Browsing The Folder , Its Erroring (404 Not Found) Folder Is Not Found On The Server ?
Feb 13, 2009I have created a folder including some html link pages in /test/htlink . Now I want to create a soft link of that folder as htlink -> /test/htlink in /var/www/html . Now when I m browsing the folder , its erroring (404 Not Found) folder is not found on the server . I have given 777 permission on every file-folder in /test . No firewall & no SELINUX .
*** I want to browse the folder ***
Ubuntu Installation :: With NVIDIA 310M Graphics Card Drivers (310M) On A Dell Vostro 3300 - Errors "no Device Found - No Screens Found"
Oct 28, 2010I have a Dell Vostro 3300, i5 460 processor with a NVIDIA 310M Graphics Card. I'm doing a KUBUNTU 10.10 (Maverick) install with the following results. The Live CD boots just fine to, "TEST," or "Install." Installation goes fine. However, the graphics card being used is the Intel i915. I have tried installing the NVIDIA drivers directly from the, "Additional Drivers," tool and after the reboot I get through the boot screen to the console. I try to manually startx and I get the errors, "no device found," "no screens found." The second install I tried purging and blacklisting the nouveau drivers and entering safe mode. Then using apt-get install nvidia-current. After that, nvidia-xconfig. Same results.
The third attempt I re-installed and this time downloaded the drivers from the Nvidia site (version 256.53). Blacklisted nouveau, remove all nvidia, updated initramfs, etc. The install went fine however I still end up at a console after boot with the same messages as above. No device found, no screens found. I've tried searching through the forum and web and have tried things like adding the modset option along with many other hacks, tips and fixes. still, no go.I can live with the Intel graphics for now although I lose 512MB of memory. Unfortunately there is no way to disable or change this set-up in the BIOS. I've seen quite a few bug reports at Launchpad:
1. Is this something I should just wait til a fix comes? Will a fix come?
2. Is there, or will there be an official Updated Ubuntu Guide for Maverick to install NVIDIA drivers with this tecnology?
3. Lastly, is there anything else I should try??
Ubuntu :: No Launcher Found In Applications Menu - "projectM-pulseaudio" Returns "command Not Found"
Nov 19, 2010I'm trying to install the projectM visualizer and I'm running into some problems. Initially, I tried to install it by running "sudo apt-get install libvisual-projectm", which seemed to work... except there's no launcher for it in my Applications menu and "projectM-pulseaudio" returns "command not found". From there, I decided to try to build it myself, by following this guide (<- link). It went well until the "make" command, which returns the following error:
[Code]....
Fedora Installation :: I2O Controller - No Volume Groups Found Volume Group "VolGroup00" Not Found Unable To Access Resume Device
Apr 8, 2009Dual PII 400, 512Mb with a Promise SuperTrak 100 IDE Array Controller. At present I have only one drive on the controller, configured for 1 JBOD array. I install FC9 with no problem. New partition is created and formatted, Grub is installed, and then... Grub is found and booted, but then I get:
Reading all physical volumes. This may take a while... No volume groups found Volume group "VolGroup00" not found Unable to access resume device (/dev/VolGroup00/LogVol01) mount: could not find filesystem '/dev/root' I can boot in rescue mode, chroot to the installed system. I changed the kernel boot parm "root=/dev/VolGroup00/LogVol00"
Debian Multimedia :: Can't Configure X-Server - Errors "device Not Found" And "no Screens Found"
Apr 15, 2011I installed debian 4.0 (etch) on an old computer with some pickled graphics card in it, and then I upgraded the computer to one with slightly newer hardware only without the graphics card (the new one used on board graphics). I moved the hard drive from the old one to the new one but when I booted it up it failed to start the X-server and I got some errors listed for "device not found" and "no screens found".
I tried using "dpkg-reconfigure xserver-xorg" however I can't seem to find a working configuration. It seems pretty silly that when installing debian it can detect all this automatically with no problems but when it comes to changing some hardware around you are left in the dark with a complicated re-configuration process. Is there not some way to automate this? I'd rather not have to re-install everything
Ubuntu :: Tcl Library Not Found?
Mar 2, 2010I try to install simulation package Espresso. When I configure I have following error message.
checking for libtcl8.5... no
checking for libtcl8.4... no
checking for libtcl8.3... no
[code]....
Ubuntu :: CD/DVD Drive Can't Be Found Now
Jun 2, 2010Upgraded from 9.10 to 10.04...using the CD Drive. Today I find out that the CD/DVD Drive is not recognized.output from lspci:
0:00.0 Host bridge: Intel Corporation 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 04)
00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04)
[code]...
output from dmesg|grep CD:
0.600187] ata2.00: ATAPI: SAMSUNG CDRW/DVD SM-308B, T100, max MWDMA2
[ 1.033197] scsi 1:0:0:0: CD-ROM SAMSUNG CDRW/DVD SM-308B T100 PQ: 0 ANSI: 5
[ 1.039846] Uniform CD-ROM driver Revision: 3.20
[ 1.040088] sr 1:0:0:0: Attached scsi CD-ROM sr0
it was operational before I upgraded, but haven't used it since 10.04 was released, so I can't say exactly when it stopped working.
Ubuntu :: Wireless Isn't Being Found ?
Jun 29, 2010I just installed Ubuntu Netbook Remiix on my netbook (Lenovo S10-2) and everything went smoothly; however, I noticed that my wireless isn't picking up .
View 1 Replies View RelatedUbuntu :: No Module Name Found?
Aug 24, 2010I recently purchased a Dell Studio 14, with Windows 7 64-bit. It has the i5 processor, and 6GB of Ram, so I went with the 64-bit version of 10.04. I've never used the 64-bit version, but I've had Ubuntu since 6.10, so Iḿ pretty familiar with it.
The install goes fine, and the OS works perfectly. When I restart, everything is great, GRUB works fine, etc. The problem occours when I boot into Windows.
After restarting from Windows, the laptop powers up, then, where it would usually boot GRUB, I get this error:
Quote:
no module name found Aborted. Press any key to exit.
Then, after pressing any key:
Quote:
Broadcom UNDI PXE-2.1 v 12.2.0
Copyright (C) 2000-2009 Broadcom Corporation
Copyright (C) 1997-2000 Intel Corporation
All rights reserved.
[Code].....
Ubuntu :: Packages Not Found?
Oct 15, 2010I have ubuntu 10.04 installed and i have manually installed some packages that the software manager does not find.after installing these packages i ran the command"dpkg --list | grep tcl"it returns
Code:
ii mysqltcl 3.05-3 Interface to the MySQL database for the Tcl language
ii tcl 8.4.16-2 The Tool Command Language (default version) - run-time files
[code]....
Ubuntu :: WLAN Is Not Found?
Oct 22, 2010my netbook doesn't see my HomeWlan, but like every other int he neighborhood. I am using a live-usb atm because i want to check if everything works out bevor i completely install ubuntu.
Details: I want to use my home-WLAN but Ubuntu doesn't see it, which is quite fascinating because it does see a bunch of other which belong to the neighbors. The second quite interesting part is that when i switch to windows i can connect without any problems (and yes it does see it as well). Any clues what might cause that behavior? My only guess is that the adapter broadcasts on a false Channel, but i aint sure about that. I entered "sudo iwlist chan" and the output is:
Code:
lo no frequency information
eth0 no frequency information
eth1 14 channels in total; available frequencies :
//bunch of frequencies
current channel 1
So i guess my adapter broadcasts on channel 1, but my router does on channel 6 (I am sure about that part). But when i tried to "fix" it with "iwconfig eth1 channel 6" and then i check the channels again, it is still on the same on (Channel 1). Well, i do have a second guess but this one seems even more unrealistic than the first one, it might be possible that my adapter isn't strong enough to get the signal, even though there are just like 2 1/2 Walls between. But this scenario is really unlikely because my netbook is getting so much other signals.
Ubuntu :: /bin/ls Command Not Found?
Nov 8, 2010I'm wondering whether my server has been hacked by someone trying to cover their tracks. When I log in now, I get a message saying "bash: /bin/ls: No such file or directory", and although 'which ls' tells me it's '/bin/ls', it is as if the command does not exist. Note that this NOT a path issue: I get the error when typing '/bin/ls' (and '/usr/bin/ls', which I thought worth trying). I tried to 'sudo chmod +x /bin/ls' and the operation was not permitted.
OK, so thinking I'd somehow hosed things, I did 'sudo apt-get install --reinstall coreutils', hoping to reinstall ls etc. I get this:
Code:
Preparing to replace coreutils 8.5-1ubuntu3 (using .../coreutils_8.5-1ubuntu3_amd64.deb) ...
Unpacking replacement coreutils ...
dpkg: error processing /var/cache/apt/archives/coreutils_8.5-1ubuntu3_amd64.deb (--unpack):
[Code]...
Ubuntu :: Wish: Command Not Found?
Feb 18, 2011I a new user of ubuntu.I got this strange problem when I was doing an installation. The command is just in the folder, but the installation says it's not there. I have tried to re-install tcl/tk package in ubuntu, but it doesn't work. Could anybody help me out on this issue
View 5 Replies View RelatedUbuntu :: Getting Command Not Found Msg
Mar 27, 2011I downloaded ff 4 tar.bz.2 file ,extaracted to root opened firefox folder and ran from there,but ff 3.6 was still there so i used sudo nautilus to remove the old ver. Now to run ff i have to open root/firefox and there is a script file i use to run ff,if i type firefox in the terminal i get command not found msg.
View 5 Replies View RelatedUbuntu :: Get 404 Not Found From Repository?
Jun 27, 2011I'm trying to install an old version of spotify since the new one keeps crashing, but I get 404 not found from the repository. This is my repository definition:
Code:
deb http://dl.dropbox.com/u/1691381/spotify-client-gnome-support_1 253a0.4.9.302.g604b4fb-1 all.deb
deb http://dl.dropbox.com/u/1691381/spotify-client-qt_1 253a0.4.9.302.g604b4fb-1 i386.deb
Is there something wrong with my definition?
Or is the repository removed?
Ubuntu :: 10.04 & Harddrive Not Found
Jul 5, 2011I am running Ubuntu 10.04 and recently installed Linux Mint on an other partition. I am now finding that when I boot up I get a message that Grub is unable to find a hard-dirve that does not exist.
how to tell Grub (or is it something/where else) not to look for a non-existent hard drive?
Ubuntu :: ALT+F2 Command Not Found?
Aug 7, 2011I am running gNatty ubuntu 11.04. before yesterday, the Alt+F2 then type in gnome-tweak-tool would successfully open the Advanced Settings in application. But now it shows "command not found", same thing for gnome-terminal...Is there anyway to fix this? What package is the ALT+F2 related to?
View 8 Replies View RelatedProgramming :: Cc1 Not Found In Ubuntu 11.04
Jul 26, 2011I have upgraded my ubuntu machine from 10.10 to 11.04, but unfortunately i do not see cc1 { compiler } part of gcc compiler driver. Do i need to install specific debian package for it ?
View 2 Replies View RelatedUbuntu :: Boot Record Not Found?
Jan 5, 2010I have been trying with several different distributions and finally tried with Ubuntu. The iso matched up with the hashes but the boot record is still not being found...are there tips other than burning slower to ensure a good burn?
View 2 Replies View RelatedUbuntu :: Can't Scan In 9.04 / No Device Is Found
Jan 26, 2010I just bought an hp 6500 wireless printer, and after taking 5 minutes to set it up (amazing how easy it is to get hardware working that supported by Linux) I was happily printing...But- I haven't managed to get it to scan from my desktop pc running 9.04. Tells me no device is found. I added the printer to a laptop running 9.10, and it scanned perfectly straight away...
I've been through the Ubuntu help documentation and haven't found a solution.I think that maybe Turbo Print (for our old Canon printer) might have messed something up. I had to uninstall Turbo Print to get the printer to work (it hijacked Ubuntu's built in printing stuff).
Ubuntu :: How To Run A Script In /usr/lib/gmt/bin/ - Command Not Found
Jan 29, 2010I'm trying to run a script in /usr/lib/gmt/bin/ but I always get the respsonse "command not found". If I type echo $PATH I get
"dan-desktop:/etc> echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/dan:/usr/lib/gmt:/usr/lib/gmt/bin:/home/dan/Documents:"
how to get this into my PATH file?I am using tcsh in case that makes a difference.