I created two EXT3 partitions (one for /boot and the other for /) and alinux swap partition after leaving 500 GB for my C drive on the HDD.
I then booted into linux using the install ISO burned onto a CD. I can see the menu where I get the option to install/run Ubuntu and the option to install in text mode, but when I go ahead, both my monitors stop receiving any input at all and go to sleep!
I created two EXT3 partitions (one for /boot and the other for /) and alinux swap partition after leaving 500 GB for my C drive on the HDD. I then booted into linux using the install ISO burned onto a CD. I can see the menu where I get the option to install/run Ubuntu and the option to install in text mode, but when I go ahead,I get the following errors Install Errors After these messages, the monitor goes blank and nothing happens.
Just looking for some general guidance with regard to installing over the native Windows 7 (x64) installation on my new Alienware M11x with RHEL 5. I have considered other Linux OS's such as Ubuntu Desktop, Fedora, and Open SuSe. However, I am of the opinion that RHEL will - from the jump - most fluidly integrate with the Intel Core i7 architecture, 1GB NVIDIA GeForce GT 335M, and other components. I plan to convert my existing Windows XP installation into a VMWare image and run that as a guest on my Alienware M11x (instead of alternatively running RHEL 5 as a guest). However, I am concerned whether it will be possible for the guest (Windows) OS (or any guest OS for that matter) to recognize/use the Alienware sound/video/LAN/Bluetooth EDR/WWAN/etc. (as the drivers were designed for Windows 7).
My new Alienware M17X-R2 notebook freezes when it's working on battery power and the AC adapter is then plugged in. If I do that while Ubuntu isn't running -- while the computer is booting, for instance --, then it doesn't freeze, so the problem must be with Ubuntu. By the way, I also experience freezing sometimes when booting, but that is linked with plymouth and fsck not wanting to coexist and, therefore, probably unrelated with the other issue.
The title pretty much says it all. I installed 10.04 on my m17x. I have sound from the laptop speakers, but when I plug in the headphone jack, it all goes quiet.
My alienware laptop doesn't boot sometimes to the login screen. It doesn't move on from kubuntu screen (the one with the animated dots). This happens only sometimes. When this happens if I press the power button once,the dots start moving and machine shuts down. I also have a nvidia card and don't know if the bug has been sorted where it doesn't show proper resolution during the kubuntu dots screen.
I'm running XBMC and I want to be able to see HD movies in my TV trough the hdmi output. how to get the HDMI output in Alienware to work? I have the latest nvidia drivers installed.
Just thought I'd give you guys a heads up incase you wern't aware, someone over on the ubuntu forums wrote a program in java that changes the lights on your alienware laptop. It may work with the desktop's as well.
I'll just post a link to my build script and you can follow it from there: [url]
Also, if you build HAL against libsmbios (from Dell) You'll get some bonus keys working as well, such as the eject key.
I love this new alienware M15X... It's a freaking beast of a laptop with 2 quad i7core procs....
I booted to the live distro of FC13 on my flash drive. The wireless card isnt present. Searching the internet i can only find a few posts lamenting the incompatibility.
How do i check whether the hardware is supported? The card is a DW1520 Wireless-N WLAN Half-Mini Card
I currently have windows 7 installed. There are two partitions. The OS is on one and the other one is used for data. Is there anyway this could be a problem?
The only readable error I have gotten is from suse. Said something about an unreadable file system. All of the others have just hung at some point during the live cd boot.
I have now tried live cds of the following and none have worked.
Its a stock alienware that I bought 3 years ago. The only change I have made is updating the ram, which I bought directly from dell to make sure it was compatible. The alienware is an intel core 2 duo, 4 gigs of ram, 160gb HD, dual sli nvidia graphics cards. not sure about the mother board, could figure it out if its necessary. Is there any reason the hardware wouldn't be supported?
I am loving the opensource driver as I don't have to switch to "discrete" mode in BIOS to get 3D support as I would have to with Ubuntu. (M11x has switchable graphics which is not supported by the nvidia proprietary driver for linux) I need some help with the audio though. In case of Ubuntu 10.04 I had to download and install realtek HD drivers for linux from
[url]
I cannot do the same for Fedora as I get compile errors.
Quote:
This is after I run the install script as specified in the "Readme".
Here is my system config .
It works. I just realized that sound is heard when the laptop is connected to an external speaker. Internal speakers still don't work. I don't know how to fix this (probably fix the switches somewhere another mixer gui or via command line) and I don't really care as the internal speakers aren't that great and I almost never use them.
I recently ordered the Alienware Aurora from Dell and upgraded the video card to the Nvidia GeForce GTX 295 as I noticed that Nvidia offers a 32-bit driver for download.
Then I noticed that the system comes with Windows 7 64-bit so I am assuming that this is a 64-bit system.
My bottom line question is will I have to install Slackware 13 (64 bit) or will I have to stick with the 32-bit version since the Nvidia driver is compiled for 32-bit? This is a gaming machine so obviously I want to be able to realize the full potential of the video card.
If I have a choice, what are the pros and cons? I DO NOT want Windows so I'll be disappointed if I can't install Linux!
The only problem I have is that I can not remove notification bar from the top and place it in bottom. I am getting the error in the enclosed screenshot. Is there any body know how to solve this problem. I have gone trhough all steps in the above link and only left is to set the notification area
I was used to use the network and battery icon in the notification are (next to the sound and date/time). Now the bluetooth, battery, network, sound and envelope icon are visible, but there is no responds clicking on it.Pressing the mute-button on the keyboard changes the icon in the notification area. Also connecting a wireless network changes the icon.But to change network is becoming impossible by clicking the icon (and I do not know an other way to change it).The only thing I can think of was whitelisting all programs:Code:sudo gsettings set com.canonical.Unity.Panel systray-whitelist "['all']"This was the only change I made.EDIT: Icons of external programs do respond.
Just upgraded to Natty. After I've been logged on for a few minutes, the notification area (hope I have the right term) just freezes up. This means I can't access the drop-down menus for sound, wireless, battery, and tomboy notes. I've done a quick search and haven't found any helpful information.
There is an unclickable area in unity its not related to any application if I am working on the desktop or browser or Libre office always its unclickable not even right-click Nothing.
I was just wondering how do i restrict someone from entering other files. Like other peoples files & the system files. My users are in /home/. I am running ubuntu 10.10.So how do i restrict access to other folders. Because i dont want other people looking inside others files or messing up my linux files.
I have the notification area displayed in my panel. Normally, it shows one speaker icon, one battery icon, and one wireless network icon. But now it occasionally shows 2 speakers and no wireless icon, or two batteries and no wireless icon. Sometimes rebooting fixes it. But it seems to be random. This used to work fine, and I can't figure out what I did to mess with it.
I recently converted and .avi file to dvd .iso and when I try to play it in my dvd player. I get this message "playback prohibited by area limitations". I was wondering what does that mean and how do I get this movie to play.
Notification area shows that I am not connected... when I click on it it crashes. CPU utilization is spiking as well. the contents of the ~/.cache/ubuntoone/oauth-login.log is:
On my Mac, when I press F2, I am able to take a screen shot of a selected area. Is it possible to assign a hot key to do the same thing on my Ubuntu 10.04 PC?
I've just tried using my bluetooth today and Karmic cannot detect it. The dongle is blinking so I'm pretty sure there's no defect. I have the standard bluetooth packages installed. I've also tried the Bluetooth Setup with the:
I've got a very annoying problem with my top bar and the notification area. The icons/applet's order is completely messed up. The icon's overlap, some do not show at all, and sometimes some do not load (seeing a black square instead). Most applet's can also be accesed through Applications or System, but especially the wireless app is necessary to be there. Perhaps there is a way to get to it via another way then the notification area, but then I dont know where . The problem isn't consistent; sometimes it's there, sometime's it's not.
I have covergloobus installed and if I download something to my desktop sometimes it goes under covergloobus and obviously that means moving it around to then get it and then put covergloobus back.
It would be nice to set some kind of rule to not have items go there or have something like in KDE and their "desktop folder".
I am a naive user in ubuntu and firstly, I do not get a network icon on my notification area. Secondly, when I connect using pon dsl-provider, my connection stays for sometime but it doesn't remain for long. I have to reconnect and again the connection is shortlived...
i think installed Ubuntu 10 2 weeks ago and it was working as far as this problem is concerned and then recently stopped showing Skype and the internet connection thing that is two arrows when connected. Both items are supposed to be next to the sound icon. You can see the blank area in the attached pic. I also do not get the top bar and bottom bar of the desktop about every 2 boots.And why is it when i save to the desktop i have to go to home>desktop instead of straight looking at the desktop. Sorry this is all happening at once and maybe it is all related?
I was so excited that finally I can get the newest version of Ubuntu installed on my computer. Yesterday I downloaded the iso file and emptied my F:/ disk, hoping I can install it this morning. Everything was perfect until I met 'swap area'. I thought it was just that the installing program needed some free space during the process. Storage hierarchy, caching, something like that. So I configured my E:/ disk as the 'swap area'.
Bad decision! After everything was done, I rebooted ubuntu, only finding that my E:/ no longer existed!!!! I couldn't believe my eyes, so I rebooted back to Win7. E:/ disk wasn't there any more! Now I have to accept the bitter truth. All my journals, photos, and documents are ruined. My point is that: if something like 'swap area' is not so common sense to everybody, why does it have to be there? And if it will format that disk, why aren't I noticed? Not so long ago, I heard some one claimed that the ubuntu10.10 installing process would be revolutionized, much more user-friendly. Well, this is not what I've expected.
