The title pretty much says it all. I installed 10.04 on my m17x. I have sound from the laptop speakers, but when I plug in the headphone jack, it all goes quiet.
View 9 RepliesIm runnning Fedora 12 on an Alienware M17x and have no sound, as far as im aware its an nVidia sound card.
Here's my alsa-info.sh printout: [url]
when my headphones are plugged into my computer, the sound comes from both the speakers AND the headphones. I just want the sound from the headphones if they are plugged in.
View 7 Replies View RelatedI'm having an issue with my computer and the headphones. When I plug in the headphones into the headphone jack, the sound plays through the headphones but it also plays through the speakers as well at the same time. I've attempted to play around with the sound settings to see if I can get this issue resolved but I have not been able too. Computer specifications are in my signature.
View 3 Replies View RelatedMy new Alienware M17X-R2 notebook freezes when it's working on battery power and the AC adapter is then plugged in. If I do that while Ubuntu isn't running -- while the computer is booting, for instance --, then it doesn't freeze, so the problem must be with Ubuntu. By the way, I also experience freezing sometimes when booting, but that is linked with plymouth and fsck not wanting to coexist and, therefore, probably unrelated with the other issue.
View 3 Replies View RelatedI have no sound when the headphones are plugged in.
View 9 Replies View RelatedBoth the speakers and the headphones keep playing the sound with headphone plugged in.
View 1 Replies View RelatedI have headphones plugged into the computer but the sound is still coming through the speakers.
View 4 Replies View RelatedIf I boot CentOS (5, up to date) without my USB headphones are plugged in, all sound output goes to the sound card. But if I have the headphones plugged in when I boot, all output goes to them, and the sound card does not seem to be recognised at all.
Is there any way I can force the sound card to be recognised, and chosen as the default device, when booting with the headphones plugged in? If I have booted with the headphones plugged in, and then I unplug them, go into System|Preferences|Sound, and press the Test button with sound playback set to autodetect, I get a dialog with the message: audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink: Could not open audio device for playback.
Then I started System|Administration|Soundcard detection, and it detected both Intel and Radeon sound cards, but its test button did not produce any sound for either. I moved the Intel device to the top of the list in the Settings tab, and then ran "Reload audio drivers" in the System tab. I got an error message saying I needed to reboot, but I didn't. At this point, the test buttons in the Sound test tab, and in System|Preferences|Sound started working OK. Do I have to go through this rigmarole every time I boot with the headphones plugged in?
I`m new to Ubuntu and Linux as all. First of all i have a Dell Inspiron N5010 laptop. I have a very strange problem, after the initial installation of Ubuntu 10.10 there were no problems plugging in my headphones or 2.1 sound system and listening to music. After a couple of days when trying to plug in my 2.1 sound system I noticed that there is no sound coming out of them, but the laptop speakers were working fine. Tested the sound system with another laptop and they worked well. I have checked all the settings and everything seems fine. I`m puzzled. I have the system dual boot with Win 7 if that makes any difference.
View 3 Replies View RelatedMy speakers are working fine, but when I plug in my headphones they aren't recognized and the audio is fed through the speakers.
Here's my lspci, if it is relevant:
Code:
Managed to get it to play through both simultaneously but can't make the laptop speakers stop when the headphones are plugged in...
View 9 Replies View RelatedI currently have a dell studio xps 16.. I'm new to Linux and can not seem to figure out how to force my laptop to play from its on board speakers. The laptop seems to believe there is headphone attached to the port constantly.. I figured this out when I use to run windows.. and my skype calls always activated the speakers.. so i know theres nothing wrong with the speakers (well i hope not). Is there any possible way to ignore the sound ports and force play from the speakers?
View 5 Replies View RelatedI'm sure this has probably come up before, but I could't find an already existing thread. I have ubuntu 10.04 and when I plug my headphones into the headphone jack, they come on, but the speakers don't shut off.
View 3 Replies View RelatedI'm just installed 10.04 on a new Gateway DX4300. The integrated sound card is a Realtek AC1200. Sound works great, however, I'd like the rear input to mute when I plugin my headphones in the front input. Where can I configure this? Here's some basic information:
[Code]...
I've been bashing my head against this problem for weeks now. The problem is that my external speakers are not being muted when I plug in headphones. I get sound through both the speakers and the headphones at the same time. This is happening on every Linux distro I've tried so far on this box, but in Windows everything behaves as expected. I've tried every option I have in both alsamixer and the Gnome sound preferences, to no avail.
Curiously, if I mute any one of the audio channels or toggle the headphone switch in alsamixer, all sound output is muted, to both the speakers and headphones. The audio chipset is a Realtek ALC888, on a Gigabyte GA-770TA-UD3 motherboard (6 jacks, optical and coaxial S/PDIF out). I must've tried a dozen different models in /etc/modprobe.d/alsa-base.conf, and none of them seem to make any difference at all.
I have issues with my sound board configuration. My speakers don't mute when headphones are plugged in and my mic doesn't work good.
I have being readed all kinds of forums and I found that the main issue is in that maybe the ALSA is not using the correct model.
I tried modifying the archive:
With different kinds of models but I couldn't found the right one. I tried all the Lenovo ones that I found in:[url]
My laptop is a Lenovo G455 and my sound board is an ATI Technologies Inc SBx00 Azalia (Intel HDA)
I love Ubuntu but this is bothering me since I upgrade to version 10.10.
I am running Fedora 15 on an Asus laptop. I have noticed that when I plug in my headphones, the main laptop speakers do not mute.
View 5 Replies View RelatedI have a Toshiba Satellite L650 with a Conexant 5069 sound card, and when I plug in my headphones the built-in speakers don't mute. I already tried adding options snd-hda-intel model=lenovo to /etc/modprobe.d/alsa-base.conf (I also tried auto, toshiba, thinkpad and ideapad). This is the alsactl init output:
Unknown hardware: "HDA-Intel" "Conexant ID 5069" "HDA:14f15069,1179fd12,00100302" "0x1179" "0xff1e"
Hardware is initialized using a guess method.
I just installed Debian Squeeze on my Acer Aspire 7736ZG and I also got some problems with the Realtek ALC888 onboard-sound. Normally, the speakers should mute themselves when headphones are plugged in, but they don't. Instead I hear sound on both, speakers and headphones.
I already installed pulseaudio, but that didn't help. On Ubuntu Maverick (11.01?) I had the problems that the sound didn't play at all until I installed an alsa-driver which was modified by one of the ubuntu developers. Is there any fix like this for Debian Squeeze, too?
Running Debian Squeeze 64-bit
$ lspci -v
Debian squeeze 64 bit, gnome. Can't find a solution. Debian Multimedia :: Auto mute speakers when headphones plugged in
View 7 Replies View RelatedSince I bought my computer and I installed Linux on it, I had this problem...
Back in the day I never Found a REAL Solution and finally my "solution" (in Fedora)
was installing "pavucontrol" to choose the Devices when I needed to Switch.
Via the Pulse Audio Volume Control I was able to Mute speakers or Headphones
at my will, even if I had both connected, this thing worked from F12 to F14 very well...
(The same problem is present in every distro I tried and sometimes it was solved the same way in other distros)
But Now, I'm in F15 And my magic workout doesn't work anymore... it doesn't matter
wich device I choose as output, the PC simply don't mute one or another and my headphones and speakers sound at the same time.
The Sound card is a HDA INTEL with the Realtek ALC662 rev1 Chip, as I said before,
I'm using Fedora 15 KDE (64 Bit version) and I'm running ALSA v 1.0.23 with pulseaudio 0.9.22-5
The output of "lsmod | grep snd" is:
snd_usb_audio 98871 1
snd_usbmidi_lib 18066 1 snd_usb_audio
snd_rawmidi 20308 1 snd_usbmidi_lib
[Code]....
I lately bought a Logitec c200 webcam, which seems to be interfacing quite well with my ubuntu 9.10 except for one thing: the moment I plug it in kmix doesn't recognize my microphone/headphones but only the webcam's inbuilt microphone- anybody know of a cure for that problem?
View 1 Replies View RelatedI just installed fedora 12 on my new lenovo laptop sl510 where I have pulseaudio over my alsa. The problem is, when I plugin headphones in 3.5 jack the speakers dont mute which is really irritating. I tried switching from "analog output" to "analog headphones", but what that does it mutes both.
View 2 Replies View RelatedI am loving the opensource driver as I don't have to switch to "discrete" mode in BIOS to get 3D support as I would have to with Ubuntu. (M11x has switchable graphics which is not supported by the nvidia proprietary driver for linux) I need some help with the audio though. In case of Ubuntu 10.04 I had to download and install realtek HD drivers for linux from
[url]
I cannot do the same for Fedora as I get compile errors.
Quote:
This is after I run the install script as specified in the "Readme".
Here is my system config .
It works. I just realized that sound is heard when the laptop is connected to an external speaker. Internal speakers still don't work. I don't know how to fix this (probably fix the switches somewhere another mixer gui or via command line) and I don't really care as the internal speakers aren't that great and I almost never use them.
I have sound on my main speakers and I can control volume from the desktop's icon tray volume control on the screen.However, my headphones were working just fine until all of a sudden they just stopped working. I tried other headphones but no change.Also, my volume control on my keyboard suddenly stopped working too.Any ideas how I can get the headphones and keyboard volume control working again?
View 1 Replies View RelatedMy usb sound card has been identified by alsamixer, however it won't make any sound when i put headphones in it. The volume is up, I know the sound card works.
View 1 Replies View RelatedJust installed Ubuntu a few days ago and have most things working except the sound. Here is the information I'm given when I type aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
I am getting no sound at all, with or without headphones.
I have done a bit of a search for this and would normally do more but as I am on holiday and have just upgraded my mother in law's machine to 10.04 and only here tomorrow then back home (750Kms away) I am hoping the community can speed things up a little.
Open Pulse Volume Control and headset mic working because input meter shows it, plays audio cause output meter shows it, but the analogue headset headphones give me no sound.
All seems to be working fine but just not getting through to headphones. This is with all apps (Skype, Totem).