Ubuntu :: Hplip And Hptools Not Working, Broken Links Reinstall?
Aug 10, 2011
I could not get my HP printer to work. So in a not so brilliant move, I have uninstalled hplip and hptool and reinstalled it.Even tough the command line message is telling that it is installed, the HPtoolbox would not run (both from the command line or the menu).Did some digging and found that all the HP related files in /usr/bin were all labelled <broken link>.So, I deleted all these.Before I tried to reinstall again, should I worry about all the leftover hplip files?
View 1 Replies
ADVERTISEMENT
May 29, 2011
Apparently I have some broken links in /usr/bin/hich causes nautilus to crash and restart. If I navigate to /usr/bin/ using gnome-commander I can see the files, as well as using terminal
View 3 Replies
View Related
Jun 8, 2011
I reinstalled Linux, in a new Partition, just formatted. Now, when I try to install, or copy, into my /usr/local/"whatever" folders I just see broken links of the files (the little x in the right top of the file, I presume is a broken link).But when I see the file in nautilus, the files seems to be good. But the programs doesn't works. The programs I've been installing are NukeX and UV Layout. The weird thing is that the very first time I installed Linux everything worked smoothly. Since I formatted the partition I've only unistalled Noveau and installed the Nvidia latest drivers of my GPU.
View 2 Replies
View Related
Feb 15, 2010
Deskjet-F4400-series
--------------------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: usb://HP/Deskjet%20F4400%20series?serial=CN9C1CK70705C5
PPD: /etc/cups/ppd/Deskjet-F4400-series.ppd
[code]....
how do I get the printer installed in hplip? I can print but cannot scan. xsane will not recognize printer. Jaunty 64bit 2GB Ram 350GB HD
View 1 Replies
View Related
Mar 10, 2010
I had F11 which was working OK'ish on my laptop and decided to upgrade to F12 when it was available. This was not too successful and I started getting problem with updates to the extent that I could not install any as I got errors which stopped the updates. Bit the bullet and backed up all the data then wiped the disk and started from a clean downloaded DVD of the full F12. Still getting problems running the updates (output below) and trying to install/run VirtualBox is also failing (also below). The build and source mentioned show as broken links, where do I go next?
Update errors -
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
VirtualBox install log error
Error! Your kernel source for kernel 2.6.32.9-70.fc12.i686.PAE cannot be found at
/lib/modules/2.6.32.9-70.fc12.i686.PAE/build or /lib/modules/2.6.32.9-70.fc12.i686.PAE/source.
View 3 Replies
View Related
Sep 21, 2010
Is there a program, or command, that will allow me to recursively check a web site for broken links?
View 2 Replies
View Related
Jun 23, 2010
All of a sudden on startup this morning my systray has disappeared. I had installed "screenlets" and that icon has diappeared as well
View 1 Replies
View Related
Feb 12, 2011
This package is broken: gksui am trying to reinstall it but displays error. Attach capture.
View 9 Replies
View Related
Mar 9, 2010
My recent borked upgrade to -current inspired me to try to come up with a way to sanity-check the lib and bin dirs for broken library symlinks (possibly indicating missing libs) and for binaries and libraries that belong to no installed package, as well as missing dependencies.
This script is the result.
I've checked the script results manually, and it appears to be accurate, so I figured I'd post it here for a second opinion, and/or because others may find it useful too. I'm not aware of another popular method of doing this on Slackware, so here it is:
Code:
View 14 Replies
View Related
Jun 9, 2010
I recently upgraded Ubuntu 9.10 to 10.04 and my wireless stopped working. It can detect that there are networks around, what their signal strength is, and then try to connect to one, but it just keeps connecting. After around 5 minutes, this stops and nm-applet says no network connection.
After I try to connect, dmesg is spammed with hundreds of the same message. I can not post these here, as I am writing from a different computer and I have no internet access from my main computer.Also, there is nothing in interfaces.conf other than lo. For some reason, my card is referred to as both wlan0 and wmaster0, with this changing depending upon where I look.Most interesting of all is that, even after I reinstalled 9.10, wireless is still broken, even though it wasn't before. It also used to work under liveCD.
View 1 Replies
View Related
May 12, 2010
I am running Ububtu Linux 10.04. When I attempt to install the latest version of the Adobe flashplayer (10.0.45.2ubuntu1), the Synaptic Package Manager (SPM) tries to remove flashplugin-nonfree and install flashplugin-installer. That fails with the message
Code:
E: flashplugin-nonfree: Package is in a very bad inconsistent state - you should reinstall it before attempting a removal. So, then I attempted to reinstall flashplugin-nonfree package but the SPM does not allow me to either install or remove the broken flashplugin-nonfree package. I tried the same things using the Ubuntu Software Center (USC) with the same failure.
Tried:
Code:
$ aptitude show flashplugin-nonfree
Code:
Package: flashplugin-nonfree
State: partially configured
Automatically installed: no
[code].....
View 9 Replies
View Related
Dec 28, 2009
I've set up hplip and added a "fax" device. However, when I go into open office and try to fax something, it says it's doing it, then pops up a window saying "step 3 of 5" asking me to add files to the fax (there are no others to add) and only the "cancel" button is clickable. Then in HP Device Manager, it shows the fax as having a job but it never does anything.
View 6 Replies
View Related
Jun 8, 2011
i'm used eeepc here the situation i've already install squeeze AMD64 KDE but i want to try using i386 gnome which is more friendly for my eeepc spec. problem is there other boot in my pc. i'm currently using win7, ubuntu 10.10 32 gnome, and ubuntu ultimate 64 gnome and i don't have external HDD.
Question is i want to remove all linux OS and keep my win7 is it ok if i'm using Gparted to delete all linux OS and then installing deb squeeze i386. my next project is to build portable server on eeepc.
View 1 Replies
View Related
May 26, 2010
Clicking on a link in an email does not work.Is there a setting I'm missing?TBird seems to work fine.
View 3 Replies
View Related
Aug 7, 2010
Links from third party applications do not work any more. When I go to click on links from PDF,s or from Pino or KeePass nothing happens. I've tested different browsers Opera, Chrome, Midori etc same thing links just don't work from third party apps.
[URL]
View 3 Replies
View Related
Dec 26, 2010
I just set up LAMP with PHP. PHP is working fine. I set up a folder with the files. Then I modified the config file to this:
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /home/stefano/public_html/
<Directory /home/stefano/public_html/>
Options FollowSymLinks
[code]..
View 3 Replies
View Related
Dec 6, 2010
At my Uni, we use a web-based login for our internet connections. Its based off of Cisco, and every Wednesday night every computer on campus must re-enter their credentials to use the network.
Normally on my several computers I simply pull up the Terminal, point links to google.com using
Code:
And enter my credentials when Cisco redirects to the login page.
Literally, the process is
Code:
Then ENTER to accept the redirect, down arrow to skip over the logo image, USERNAME, ENTER, PASSWORD, ENTER, ENTER.
Naturally, this is EXTREMELY time consuming, as I have about 5 computers located around campus and must physically walk to the machines and login every single week.
My question is, How would I formulate a program that does the following;
1) checks for connectivity (i.e. is able to reach/resolve to the greater part of the internet) and
2) automatically fills in the credentials on the links login page?
View 2 Replies
View Related
Apr 6, 2010
If you have some directories shared that contain symbolic links that are NOT being resolved by the client machine, try adding these lines to your /etc/samba/smb.conf file:
Code:
[global]
follow symlinks = yes
wide symlinks = yes
unix extensions = no
View 5 Replies
View Related
May 26, 2011
Fedora 15, when I click on a link in Evolution email, Firefox opens OK, but does not go to the link but to the home page.Any work-arounds please or is this a bug?
View 8 Replies
View Related
Mar 10, 2010
All of a sudden, when I click on a link in Thunderbird, nothing happens, where it used to open a tab in Firefox. Left clicking and selecting "open in browser" also doesn't work.I checked in Firefox to make sure I had it set as my default browser, but when I click on an html file it opens in Konquerer. Is there another setting I should change?
View 1 Replies
View Related
Nov 23, 2010
I read and saw a video that says that typing in 'links' command followed by a website, will open a site in terminal.
However, when I type in the links command, terminal returns the error 'bash: links: command not found'.
What package or library needs to be installed to get this command to work.
View 2 Replies
View Related
Mar 7, 2011
When I click "Places" in the top gnome panel of Maverick, then click any link such as "Home" or "Desktop" (or any bookmark) Movie Player opens (instead of Nautilus)! This started today. I have rebooted twice, but that didn't help (no surprise--this isn't Windows).
Code:
$ cat /usr/share/applications/defaults.list
[Default Applications]
application/csv=openoffice.org-calc.desktop
application/excel=openoffice.org-calc.desktop
[code]....
View 2 Replies
View Related
Dec 24, 2010
So, approx 2 weeks ago, clicking on links in Thunderbird stopped working. There is no response in the browser whether it is open or not. I am able to paste the links to the browser just fine. Being congenitally lazy, I would rather just click them. I have upgraded to the latest version of Thunderbird and have the same issue. I have tried using Swiftfox, Firefox and Opera - all give the same non-response.
Am not getting any error messages, the links just do not open. Can't find any settings relevant to this issue.Any bright ideas out there?
View 8 Replies
View Related
Nov 19, 2009
I have switched from Gnome 11.1 to KDE 11.2 but am still using Evolution Mail as I could not figure out a straightforward way to move my large email base to KDE PIM. When I click on a link in emails, I get the message "failed to execute child process epiphany".I am using Opensuse 11.2 64-bit, KDE 4.3.3 Evolution Gnome
View 6 Replies
View Related
Feb 7, 2010
When the update on Open Suse 11.2 is going to happen for Thunderbird version 3. The current version (links don't work to open on default browser.
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.5)
Gecko/20091130 SUSE/3.0.0-1.1.1 Thunderbird/3.0
View 2 Replies
View Related
Feb 3, 2009
I have a personal wiki of notes, with now thousands of links in markdown format:
[link text](http://example.com)
but now that fckeditor is available for mediawiki (very beta), it has become much better to just stick with wikitext format. There are only a few conversions to do: tables, links, and bulleted lists. The lists are a fairly simple regex and fckeditor magically reformats the tables, so all I'm left with is the links. But I'm not a regex master. How do I reformat code...
View 12 Replies
View Related
Apr 15, 2011
It's been along time since I had to put my tail between my legs anf come to the forum to ask a question. However, I have a problem that has me stumped and can't seem to find an answer for.
I've been using WinFF as a frontend for FFmpeg since I was on Intrepid. Every time the same thing after a fresh install. Add Medibuntu then install the extra codecs ffmpeg and winff and everything worked.
The other day I decided to do some spring cleaning on my machine and start over with a new installation of Lucid. I had the installer format the root partition while leaving /home alone. Afterward I went about reinstalling winff/ffmpeg just like I,ve done in the past. But now when I try to convert an AVI video into MP4 to play on my BlackBerry I get an error that states "unknown encoder libfaac"
I've checked in synaptic. It's installed. I tried another reinstall. No luck. Googled but couldn't find an answer that would work.
Everything was perfect before the reinstall. Now I get this error. I didn't upgrade or anything just a straight reinstall of Lucid.
View 5 Replies
View Related
Aug 3, 2010
I run a Squid 3 server that is acting as a web filter. It worked fine on Etch. The system stopped working properly due to two of the three SATA cables being bad. Before I figured that out, I tried doing updates. Since Etch updates were no longer available, I did a distupgrade to Lenny. Immediately, Squid stopped working properly. It would take up to two and a half minutes for it to respond to a web request and add it to the access.log. This was using the same configuration file that it was using before the update.
After I found the hardware problem, I did a clean install of Lenny. I used the basic squid.conf like I did on the previous system, only changing it to add my ACLs and because it wasn't saving an access.log to the default location unless I uncommented the path directive. Now, it won't respond to a request at all. Forwarding is enabled and the firewall seems to be set up correctly.
View 1 Replies
View Related
Jun 21, 2010
The problem seems to appear with the following packages:openoffice.org-commonopenoffice.org-coreant it said before that the broken package is python-uno.I uninstalled openoffice completely and now when I try to install it again from synaptic, it goes:
Code:
E: /var/cache/apt/archives/openoffice.org-core_1%3a3.2.0-7ubuntu4.1_i386.deb: short read in buffer_copy (backend dpkg-deb during `./usr/lib/openoffice/basis3.2/program/libfrmli.so')
[code]....
View 6 Replies
View Related
Jan 21, 2011
So I am using 10.04 and was trying to get gitosis working on my machine so that I could use it over ssh. Anyways I'm not sure what happened (as I did this a month ago) but ssh isn't working now. When I try to ssh on the box (ssh localhost) I get the below error.
PTY allocation request failed on channel 0
bash: gitosis-serve: command not found
Connection to localhost closed.
First I know that gitosis-serve was incorrect anyways, but what I can't figure out is where that command is being called from. When I run a terminal from the box I don't get the error so it seems to be only ssh.
View 1 Replies
View Related
