Ubuntu :: Hosting A Small Low Volume Website

Aug 19, 2010

After searching I cannot find what I am looking for. My wife has comissioned me to put together a cheap website to highlight her crochet projects. I had used OSX's web site server in the past. where the folder for web sites are in Ubuntu. This would get very low traffic and would be fine on a desktop computer. I see no reason to install Ubuntu server.

View 5 Replies


ADVERTISEMENT

Server :: BSD Or Ubuntu - Includes Hosting A Website And A Small FTP

Feb 18, 2011

First of all, let me just state that i want to make a small server for my home.. which includes hosting a website and a small FTP server.

Now as far as ease, stability, use, etc.. just overall, which would be more ideal to use for this?

My top choices are FreeBSD and Ubuntu Server.

However, I do not know which of these to go with, since this is my first time setting up a server. I hear BSD is really best for web servers, but I would like to hear what the people at LQ has to say.

I know Ubuntu Server would probably be more easy to set up, but how is it in terms of stability and speed?

View 6 Replies View Related

Ubuntu Servers :: Virtualization - Small Web Hosting Service

Nov 22, 2010

I've got a small web hosting service, for some of my friends. Where I want my friends to be able to have dedicated virtual servers just for a simple LAMP and ftp-server.

I've got quite limited hardware.
AMD Athlon II (Dual core)
4 GB 1333 MHz DDR3 RAM
100 Mbit Fiber-lan ( Dynamic IP )

What I would want to know is how to create the virtual servers in an truly optimal way. Should I use KVM or VirtualBox? How can I make the request to mydomain.org go to one of the virtual servers and the request to anotherdomain.com go to another virtual server?

If the virtual server is the best solution.
* How much memory should be sufficient for a simple LAMP/FTP-server?
* What would be the most optimal settings for my limited hardware capacity?

View 1 Replies View Related

Ubuntu :: Hosting A Website ?

Mar 15, 2011

Is there anyway of hosting a website using ubuntu?

View 3 Replies View Related

Ubuntu :: Website Hosting From Home Computer?

Feb 17, 2011

1- How can I prepare my own website in my own pc at home? I have had used Nvu in the past, but it looked to me very unstable (it disappeared from my screen at simple use, despite re-installing it again and again), and I think the Kompozer was also not very far from it, my experience.

2- How can I prepare my pc to run that website? What Linux software I need to download for? Do I really need to have a great cash to transform my poor pc into it? I think that because it is Linux-Ubuntu, not Windows, the situation can not be any worst or more expensive... uh?

3- In theory, if I have that website in my own pc... how I know that hackers can only see my page (in a separate-isolated folder from other folders, right?) and can not take a tour of my entire pc, documents, photos, etc, including copying or stealing archives or Ooo documents? It is not that the same way when (by example) a hacker can steal the next Stephen King book or script and sell/display it worldwide without even his knowledge?

View 5 Replies View Related

Ubuntu :: Hosting Website With LAMP Server With 10.10?

Mar 31, 2011

I'm running with Ubuntu 10.10 Desktop edition and I have LAMP server installed on the machine. I'm wanting to host my Automotive Detailing website that I'm almost done with off of that server. I have decals made up for my car and friends cars with the domain that I have registered on it. Now, can someone please tell me where and how to put the files for my website on the server and how to configure everything so I can get it up and running ASAP?!? I'm fairly new at this Ubuntu and what not so I need a detailed tutorial

So this is what I need to know:

==> Where to put the webpage files
==> How to configure the server to open it up to the world wide web
==> How to change the IP Address to Static and how to know what to change it to.
==> How to point the registered domain to the server.

Like I said I'm fairly new at this so please be as detailed as possible!

View 5 Replies View Related

Server :: Website Hosting In Tomcat 5.5

Jan 25, 2011

I have application (WAR format) deployed on tomcat 5.5. I am able to access application using: "http://my_server_hostname/application_base_directory_name/hello.do" for example. I do not want my users to remember or bookmark the full link "http://my_server_hostname/application_base_name/hello.do"). Is there a way that i could have tomcat host it like a website and i can directly get the index page open by simply typing a url (http://hostname) in the browser? if possible, i would like to do it using tomcat only (no httpd connectors or modules).

View 1 Replies View Related

Ubuntu :: Use Ssh On My Web Hosting To Install A Magento Testing Website?

Mar 23, 2010

im trying to use ssh on my web hosting to install a magento testing website but i can't connect to it. i tried reading this [URL]...but now im stuck with this instruction.. By default the public key is saved in the file ~/.ssh/id_dsa.pub, while ~/.ssh/id_dsa is the private key. Now copy the id_dsa.pub file to the remote host and appended it to ~/.ssh/authorized_keys2: i searched for the ~/.ssh/authorized_keys2 in my web hosting file manager but i didn't find it..

View 6 Replies View Related

Fedora :: Own Website Hosting - Convert Pc Into Web Server Or Get A New One?

Dec 14, 2010

I have hosted my site from some hosting service. They are providing pretty good C panel but my problem is that the host belongs from US and maximum hosted website from US and during united states office hours my site goes down because high usage and overload on mysql server. I have tried my pc to turn into web server by fedora 14 and I am successfully to do it. But I have only one pc and It's Intel dual core with 2 gb ram. I know It's pretty good configuration for F14. Bu My pc is more that 3 and half years old. So, I want to know is it will be good idea to convert my pc into web server or should I get a new one? Or what do you say If I get a used pc.

View 5 Replies View Related

Networking :: Hosting A Website Without A Static IP Address?

Apr 18, 2010

My new line provider/ISP won't give me a static IP address - it's DHCP or nothing. Is there some trick I can use to allow myself to host a web page? I was thinking of getting a static address elsewhere, like at my sometime place of employment, and redirecting, but it just moves the problem downstream.Realistically, assume I leave my computer on and hardly ever reboot (CentOS is pretty stable), then will I typically keepthe same address for weeks or months at a time? If so, I could live with logging in to my registrar a few times a year to change the address, as bizarre as that would be

View 5 Replies View Related

OpenSUSE Network :: 10.3 - Hosting ASP Website (Apache2 Setup)

Feb 8, 2011

I'm completely new to this whole hosting on linux thing. I'm using apache2 and have everything setup as if I was doing it on a windows machine but when I navigate to the site via URL it displays the source code as plan text and thats all I see. I'm running openSuse 10.3.

View 9 Replies View Related

Server :: Will Icecast Or Similar Interfere With Normal Hosting Of Website

Dec 19, 2010

So I am (excitedly frustrated) 3-4 months from the first working install of my linux server. So I am setting up a team to work on the server, I have a couple questions. first what the server will do.The server will host icecast (internet broadcasting program similar to shoutcast), podcast versions of said shows, and a website.

1. Will icecast or similar interfere with normal hosting of the website (though they are coming from the same server I believe its broadcasted on different ports so I imagine not)

2. Should I use a seperate server to store the mp3's or is it ok to keep them where on the same machine ( I would like to keep them on the same machine, logicly I would think it would cut down on load time)

3. I am worried about server maintaince in the way of hackers n such as well as hardware and software, memory usuage, bandwidth is there a checklist and maybe a way to automate this.

I should clarify, I know how to tell schedule a task but what if I need it in perverbial safe mode (yay windows) and I can't be there for it to happen and when its finished return to work as usual by its self.

4. I was thinking my content (file) manager, server maintainer, and I would have access to wlan when we can't physically be there, is this safe? Can I make it safer? What about ftp for my webdesigners and podcasters?

5. I started having doubt about myself using linux (ubuntu server) because for cost saving I am sacrificing a gui as well as general knowledge. I have previously installed and got working a server in linux before but I don't know what hole I could have possibly left open. Question would it be better and easier to use someone else to host my site for me such as amazon or o-f.com or should I keep going with linux, or buy windows server?

View 3 Replies View Related

Ubuntu Networking :: Hosting Website: "Requested URL Was Not Found On This Server"?

Nov 21, 2010

I'm doing an upgrade of a web based application for a charity organization. To test the changes that we're making to the code, I wanted to set up a server on my home PC to host a copy of the site. I've configured apache, php and mysql like the server that's currently hosting the real app, but I have a problem:The first page is a login screen. This, of course, has a login form like so:

Code:
<form id="login" action="/menu/login" method="post">
<fieldset class="a_cuatrocincuenta">

[code]....

View 8 Replies View Related

Ubuntu Security :: Basics Of Good Security Of Small Commercial Website?

Jan 17, 2011

1. I understand you can protect your files or directories in your website by setting file/directory permissions. The meaning of r w x is clear to me, but I'm not sure how to proceed... Starting with the index.html file, if I wanted to make it so that anyone in the world can read it but can't modify it, do I set its permissions to rwxr-xr-x? If I set it to rwxr--r--, would that mean the file couldn't be served? I mean, what does the x setting do on a .html file, how can a .html file be executable?

2. If file permissions work on the lines of owner-group-others, in the context of a website, who is 'group'? As far as I can tell, there's only the owner, which is me, and others, which is the world accessing the site. Am I correct in thinking that by default, say when creating a website on a shared hosting server, there is no group unless I specifically set one up?

3. My ISP allows the DynDNS.org service, meaning that I could serve a website from my home. It's too early to go that route just yet, but for future reference, I would like to ask about the server software called Hiawatha. It is said to be secure, but having read some evaluations of it, it doesn't seem to offer anything that couldn't be accomplished with Apache or Cherokee, it's just that its security settings are simpler and easier to configure. Am I right about this? Or does Hiawatha truly offer something that the other major server packages don't?

View 9 Replies View Related

Ubuntu :: Play A Small Blip/beep Sound To Let Hear/test The Audio Levels Upon Volume Change?

Mar 5, 2011

How might i be able to play a small blip/beep sound to let me hear/test the audio levels upon volume change? Mac OSX users may know what I'm talking about. I had a similar application in windows. It helps me guage my volumes before i play games/...../videos.

View 3 Replies View Related

Server :: Stop IP Based Hosting In Virtual Hosting?

Aug 18, 2011

I have designed name based virtual hosting in apache. as of now,I am able to access website using IP also. which is I am looking to block, only can access by the name

View 7 Replies View Related

Debian Hardware :: Microphone Noise - Small Red "x" On Volume Control Recording

Apr 5, 2011

when I try to make a recording in my laptop (integrated mic), I am able to hear myself (when I reproduce it afterwards) but with a lot of noise. I read a solution of going to alsamixer and disabling "L-R" in capture, but when I do that,I am not able to hear anything. Another thing (I don't know if that has to do with it) is that when I go to volume control->recording, every time I see a small red "x" in every mic (microphone, capture, internal mic) and if I enable them, close and reopen volume control the same "x"s appear.

lspci |grep -i audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)

View 2 Replies View Related

Ubuntu :: Default Volume To 100% In Terminal With Gnome-volume-control-applet?

Jul 17, 2010

Is there a way to default volume to 100% in the terminal with gnome-volume-control-applet or any other program? I am setting up a dedicated Zsnes machine which boots into Fluxbox but the volume is muted by default. There isn't a man page for gnome-volume-control-applet.

When I log into Gnome the volume is set to 100%, but Fluxbox is always set to mute.

View 1 Replies View Related

Ubuntu Multimedia :: USB Soundcard Volume Controls With Laptop Volume Keys?

Oct 29, 2010

I've got my xubuntu 10.10 install just about perfect on a little acer aspire d250, apart from a small sound useability issue: In the interests of simplicity and resource usage I removed pulseaudio. After a bit of fiddling I got it so that my USB soundcard (ProDac) is recognized and automatically set as the default soundcard when plugged in. Any sound applications automatically use the USB sound if it present, no need to around with pulse. The only problem is that my netbook's volume control keys still only control the master volume of the inbuilt soundcard, and have no effect on the usb sound. Does anyone know of a way to change which sound device these keys actually effect? I'd like to write a little script so that when the usb device is detected the keys are remapped.

View 1 Replies View Related

Ubuntu Multimedia :: PCM Volume Not Affected By Master Volume Control With Alsa

Mar 7, 2011

I'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.

First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.

View 1 Replies View Related

Ubuntu Multimedia :: High Volume - System Sets Volume To Maximum Value?

Mar 24, 2011

I used Ubuntu 10.10 (64 bit) on IMac i7. As far as, I remember, after installing Pulse-Audio Equalizer, for each restart of the system, after login screen, system sets volume to maximum value. What can I do?

View 1 Replies View Related

Ubuntu Multimedia :: Usb Headset - Cannot Regulate The Volume Of The Phones (output) Anymore With Gnome-volume-control

Jun 12, 2010

since using 10.04 I have a big problem with my usb headset (freetalk everyman)

1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.

2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:

[Code]...

View 6 Replies View Related

Ubuntu :: Volume Control - Volume Slider Moves Up Even If Try To Slide It Down

Sep 9, 2010

I'm using 10.04 now and it runs ok, except one strange thing in the Volume control applet. Sometimes, when I click on the volume slider, it moves up. Even if I try to slide it down, it moves up on every click. The same when I click left of it - it keeps moving up! This is very annoying at night when the music gets loud and wakes everybody. It happens with or without Compiz turned on

View 3 Replies View Related

Ubuntu Multimedia :: Volume Control Can Only Do Mute Or Full Volume?

Oct 31, 2010

I am struggling with a problem with the volume control... when i try to adjust the volume with the sliding bar i can not do it. If i put the scrollbar to the 0 position, it is muted. when i move it to anywhere else, i get the full volume. From other programs like vlc, i can adjust the volume with no problem.

View 2 Replies View Related

Ubuntu Multimedia :: Very Little Control Over Volume Using Master Volume Level?

Apr 10, 2011

My volume control seems to have only three settings: TOO LOUD, VERY QUIET, OFF. If I adjust the Master volume slider from the Panel, only about the right 1/8th has any effect and if I slide it past about the 95% mark, I get no sound at all. At the far-right end of the volume control, I get total volume. It's basically like the slider only has any impact in the top 5% of it's space. Below 95% of the slide, there is zero volume.

It's so drastic, that one tap down of the volume button on my keyboard kills the sound (because it nudges the slider past that 95% mark). This happens in the Audio settings, etc., system-wide. If I adjust the volume for an individual app from within the app (MPlayer, for example) it behaves exactly as expected (that is, app volume works smoothly, it's just master volume that has this issue). I have run through most of the "obvious" things-- I'm wondering if I broke something by installing the extra KDE packages to get Amarok to work.

View 3 Replies View Related

Ubuntu :: Use Super Keys As Volume Up And Volume Down In Karmic?

Mar 17, 2010

In Intrepid Ibex, I was using the left Super key as Volume Down and the right Super key as Volume Up, because it was just so convenient.

However when I go to the "Keyboard Shortcuts" window in Karmic, it doesn't let me assign the Super keys to anything. I mean like, I can use the Super Keys along with other keys, but not by themselves.

Is it somehow possible to use the Super keys for Volume Up and Volume Down in Karmic?

View 3 Replies View Related

Ubuntu :: 10.04 LTS - When I Adjust The Volume With The Volume Wheel ,Nothing Is Clickable?

May 1, 2010

It seems that when I adjust the volume with the volume wheel on the side of my notebook, the OS messes up. Nothing is clickable, I cannot type anything, in order to get a working computer again I have to hard reset it.Why is this happening? I have never experienced this. I have a Toshiba Satellite that I recently installed Ubuntu on.

View 5 Replies View Related

Debian Multimedia :: How To Have Volume Buttons On Laptop Change 'pcm' Channel Volume Rather Than 'master'?

Jun 13, 2010

I'm running squeeze (last updated today), and everything has been working great. There is only thing that would simplify my life minutely..Anybody know how can I have the volume buttons on my laptop change the "pcm" channel volume rather than "master"? If they could control pcm, then I could adjust the volume coming out of my headphones or my computer speaker (both controlled by pcm, but not master...seems strange to me) with just one click.I tried to find this info online, but all results seem to refer to an older version. The simple "click here, set this" solution no longer is possible.

View 2 Replies View Related

Debian Multimedia :: Laptop Volume Buttons And GNOME Volume Are Not Synchronized

Feb 27, 2011

Debian Squeeze 6.0.0 on a Thinkpad T43, sound volume is not synchronized between the laptop volume buttons and GNOME's Volume Applet. So if I turn the volume all the way down with the physical buttons, the volume applet may still indicate 75%.I did not have this problem in Debian Lenny. Pressing the volume buttons used to show a volume bar on the screen, as did pressing the mute button.

View 8 Replies View Related

Fedora :: Dumb Lvm - Volume Group And Volume Names Are Gone From View

Jan 22, 2011

I don't know much about lvm and I've managed to screw up a drive. I had a 500GB drive with FC14 on it and I wanted to copy over a load of data to my new 1TB that was replacing it. I set up my new install the same way as the old...including the same volume names (error number 1 I think) I successfully mounted the old/500GB drive (using vgscan and vgchange -a y etc.) using a laptop (running FC13) and an external hdd cradle. I could access the files I wanted but this wasn't the machine I wanted to copy them to (I was doing this while waiting for the install to finish on the new drive).

When I tried the same process on the new install I found that having two lvm with the same name meant I couldn't mount the external one. So I opened the disk utility (palimsest) and was going to change the name of the old volume group but it wouldn't let me do that. I then thought maybe I could get away with just changing the name of the partition where the files were and maybe I could add it to the mounted group or something so I changed it to lv_home2. This changed the name of my new/1TB lv_home to lv_home2 as well. So thinking that wasn't the answer I just changed the name of the new lv_home2 back to lv_home.

From that point on I haven't been able to see the old drives partitions (the new volume group still works so far). I has a physical volume but the volume group and volume names are gone from view. When I try to vgscan on my main computer or the laptop I had it working on earlier I get:

[Code]....

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved